Hello,
Does anyone know if there is a way to change the predictive text input to portuguese?
Thanks,
Tiago.
Hi,
You can use 3 part software as: http://www.pdamill.com/prod_tk.shtml
Regards
JoseF
Or wou may like to use a different software altogether. Have a look at www.wordlogic.net - I use it all the time and think it's really much better.
Hi Guys,
after playing for about a week with the touch diamond keyboard on my mogul I've come to the conclusion of being the best SIP touch keyboard i've ever used BUT (here is the good part)
*"DO NOT INSTALL IT ON YOUR MOGUL UNLESS YOU WANT YOUR CONTACT PREDICTION TO GO AWAY WHILE WRITING A MESSAGE OR EMAIL, SUPER SLOW INPUT WHILE WRITING AND ALSO IT TOOK 9 MINUTES TO UNINSTALL."*
with that being said it is up to you if you want to give it a try.
torankusu said:
Hi Guys,
after playing for about a week with the touch diamond keyboard on my mogul I've come to the conclusion of being the best SIP touch keyboard i've ever used BUT (here is the good part)
*"DO NOT INSTALL IT ON YOUR MOGUL UNLESS YOU WANT YOUR CONTACT PREDICTION TO GO AWAY WHILE WRITING A MESSAGE OR EMAIL, SUPER SLOW INPUT WHILE WRITING AND ALSO IT TOOK 9 MINUTES TO UNINSTALL."*
with that being said it is up to you if you want to give it a try.
Click to expand...
Click to collapse
Other issues are that some are not able to uninstall unless they hard reset, issues arise with your physical keyboard.
These are not issues that arised on the 6800, but rather most devices out in the market. It has been stated in the thread with the leaked attached software that the software is very buggy and doesn't have proper testing.
Install at your own risk. I personally rather use the HTC Touch Keyboard and Keypad which is almost identical except for the skin.
torankusu said:
Hi Guys,
after playing for about a week with the touch diamond keyboard on my mogul I've come to the conclusion of being the best SIP touch keyboard i've ever used BUT (here is the good part)
*"DO NOT INSTALL IT ON YOUR MOGUL UNLESS YOU WANT YOUR CONTACT PREDICTION TO GO AWAY WHILE WRITING A MESSAGE OR EMAIL, SUPER SLOW INPUT WHILE WRITING AND ALSO IT TOOK 9 MINUTES TO UNINSTALL."*
with that being said it is up to you if you want to give it a try.
Click to expand...
Click to collapse
Does this break the autocomplete feature for the slide out keyboard on sms/mms contacts too or just for the SIP keyboard?
Carlos, do you have a cab to upload for that HTC Touch keyboard? Cannot find by searching XDA.
serfboreds said:
Does this break the autocomplete feature for the slide out keyboard on sms/mms contacts too or just for the SIP keyboard?
Click to expand...
Click to collapse
it does it for both.
serfboreds said:
Does this break the autocomplete feature for the slide out keyboard on sms/mms contacts too or just for the SIP keyboard?
Carlos, do you have a cab to upload for that HTC Touch keyboard? Cannot find by searching XDA.
Click to expand...
Click to collapse
Here you go bro. Enjoy
[email protected]$ said:
Here you go bro. Enjoy
Click to expand...
Click to collapse
Sweet, perfect. My cab directory on the server is stocked! \
edit: this cab breaks autocomplete too, huh?
any workaround? That is a rather good feature.
serfboreds said:
Sweet, perfect. My cab directory on the server is stocked! \
edit: this cab breaks autocomplete too, huh?
any workaround? That is a rather good feature.
Click to expand...
Click to collapse
auto complete only seems to work when you use xt9.
but other then that idk if there would be a way to be enable it.
I installed it and used it for a while... i must say its a great keyboard for a touchscreen... but then i realized the main reason why i got the mogul vs the touch, THE HARDWARE KEYBOARD!
This completely screwed up the autocomplete in emails and sms, text predictions and SIP options, even when using the hardware keyboard.
Uninstalling was a nightmare... so I did a hard reset and went on with my happy mogul...
I still think its a great software keyboard, but for a devise that its designed to... not the mogul
The Diamond keyboard seems to work on my Telus P4000 running DCD3.0.4 with the only bug being that when you press a key the icon for the selected key is really big but this goes away as soon as you life your finger so it isn't a big deal. Autocomplete seems to work for me but I never used it much so I may not be testing what others say is not working. If I create a new SMS and start typing in someone's name using any of the Diamond keyboards (since there are 3) or the hardware keyboard the name comes up before I finish typing so I don't think there's any issue with that.
The Touch keyboard is almost the same you say? I may have to try that one...
touch keyboard
Aledc78:
Just for clarification, the keyboard you had so much trouble with prediction and uninstalling was the Touch, or was it the Diamond? I'd really like to give the touch one a shot. My large fingers are WAY too big to even consider using the default WM6 keyboard, its a joke. I can't give up prediction though, and as a general rule I steer clear of anything that is a "nightmare" to uninstall.
aledc78 said:
I installed it and used it for a while... i must say its a great keyboard for a touchscreen... but then i realized the main reason why i got the mogul vs the touch, THE HARDWARE KEYBOARD!
This completely screwed up the autocomplete in emails and sms, text predictions and SIP options, even when using the hardware keyboard.
Uninstalling was a nightmare... so I did a hard reset and went on with my happy mogul...
I still think its a great software keyboard, but for a devise that its designed to... not the mogul
Click to expand...
Click to collapse
I managed to uninstall Diamond keyboard. I used SK Tools to uninstall and voila...it got uninstalled
Stay away
Yeah, this keyboard is really a pile of crap. It broke all my auto complete, and it also broke the ability to page down by pressing the space bar in a browser. And mine wouldn't install at all, it sat there for over 30 minutes doing nothing, I had to hard reset to get rid of it.
Seriously, if you want a device without a keyboard, just buy a touch. A physicial keyboard is better than any soft ketboard anyway
I found the latest version of the CooTek TouchPal keyboard with the Diamond theme works a lot better on the Mogul than the Diamond Keyboard. It's not free though.
CoolTek
Still, compared to the Diamond ported keyboard, CoolTek sucks.
I'm surprised that the problem with inputting contacts and having them autocomplete via the Hardware Keyboard is still broken. The hardware keyboard is generally preferred, but the Diamond port is amazing in small spaces / one handed typing.
anyone know of a fix?
Hello,
first at all, sorry for my bad english.
I have following question:
Is it possible to set, for example, the Phonepad as an standard? I installed it, but after every start there is the bad normal minikeyboard as an standard. I only need this one and the hardware keyboard. Is it possible to block the other ones or something like that?
Greetings
Pluppi
I believe the SIPChange program works on these devices as well. I can't say for sure but u can give it a shot.
Thanks, but it doesn´t work. After a reboot it says that he cannot open the programm because of certificate or something like that.
Greetings
Pluppi
Hello! I have the english version of the X1, but until now, I have been able to use the àü-button, to make the danish special-letters; æ, ø, å...
But now, nothing happens when I try.. Have anyone an idea why..? It would be a great help, because I use the three letters a lot..
danish-x1 said:
Hello! I have the english version of the X1, but until now, I have been able to use the àü-button, to make the danish special-letters; æ, ø, å...
But now, nothing happens when I try.. Have anyone an idea why..? It would be a great help, because I use the three letters a lot..
Click to expand...
Click to collapse
Did you install any keybord app, or anything prior to this happening?
sounds like an issue of keybord no being able to find the dictionary.
smaberg said:
Did you install any keybord app, or anything prior to this happening?
sounds like an issue of keybord no being able to find the dictionary.
Click to expand...
Click to collapse
more like a case of installing a keyboard app that overrides the DLL registry that points to the DLL that provide such key functions.
zenkinz said:
more like a case of installing a keyboard app that overrides the DLL registry that points to the DLL that provide such key functions.
Click to expand...
Click to collapse
that is what i meant, cause the regestry dosn't find the da.. things
i have the same issue.
dont know if it ever worked.
but i did install the blackstone VKeyboad.
could this be the problem?
Yes it could. I've tried to find a usable keypad to use for onehanded sms but each time I installed one, I lost my easy access to my special letters (æøå). I have a english version bought in Norway.
osmano said:
Yes it could. I've tried to find a usable keypad to use for onehanded sms but each time I installed one, I lost my easy access to my special letters (æøå). I have a english version bought in Norway.
Click to expand...
Click to collapse
try my raphael keyboard
http://forum.xda-developers.com/showthread.php?t=450021
Thanks, but i wasn't looking for a qwerty-keyboard. I was looking for a simple phone-keypad for use in portrait for quick sms. Whenever I found one and installed I lost my letters.
Uninstall Touch HD keyboard
Hi,
Had the exact same problem with my danish bought (english version) x1, but i uninstalled the touch HD keyboard, restarted X1, and it was back to normal. Its caused by an overwrite of the original keyboard dll. Explained in detail in this thread: http://forum.xda-developers.com/showthread.php?t=447989&page=2
I hope someone is able to figure out a way for us to keep our au-key functionality in combination with the Touch HD keyboard, as it would be nice to have a one handed option.
regards
is it posible to copy the .dll
then install the hd keyboard.
then place the copy's .dll back
???
anheuer said:
is it posible to copy the .dll
then install the hd keyboard.
then place the copy's .dll back
???
Click to expand...
Click to collapse
this won't work.
first of all, the DLL, is defined in the registry (I could have mispelled the registry path because this is off my memory)
ImeFile in \hklm\system\currentcontrolset\controlpanel\layouts\e0010409 (or a locale based on your ROM language)
So the default value of the registry is "Compime.dll"
when you install the HD keyboard CAB, it's the registry that gets overwritten ("T9ime.dll"), not the file. So keeping a copy of the DLL and recopy wouldn't help, since practically no files has been replaced except the registry.
You can retain the ascent key, etc though by reverting the registry to "CompIme.dll" after the HD cab installation. However, doing so is at the expense of HTC HD's own implementation of word completion and T9 function (so it renders T9 phone pad and compact qwerty SIP useless)
so if i would like to use the compact keypad of the HD without the T9 and word completion.
then i could change this and i would have this keypad and the au key funtioning?
thjensen said:
Hi,
Had the exact same problem with my danish bought (english version) x1, but i uninstalled the touch HD keyboard, restarted X1, and it was back to normal. Its caused by an overwrite of the original keyboard dll. Explained in detail in this thread: http://forum.xda-developers.com/showthread.php?t=447989&page=2
I hope someone is able to figure out a way for us to keep our au-key functionality in combination with the Touch HD keyboard, as it would be nice to have a one handed option.
regards
Click to expand...
Click to collapse
well my raphael keyboard should not (i'm not sure as my x1 is at repair) but other stated this. and there is a keypad for portrait and sms with t9 support in it, and if im not wrong the hardware keyboard should have autocomplete in it. and as aplus the letters are bigger than the touch hd's
I have just installed the Touch Pro peypad-package, and it works very fine.. But again - I can not use the danish letters..
Is it not possible to get such a keypad-package and still be able to use special letters..? That would be really great..
danish-x1 said:
I have just installed the Touch Pro peypad-package, and it works very fine.. But again - I can not use the danish letters..
Is it not possible to get such a keypad-package and still be able to use special letters..? That would be really great..
Click to expand...
Click to collapse
hmmm.... can you choose danish from the language in system settings sip?
what keys aint working, im using it in swedish and its working great, explain the bugs, and i'll try fixing them. that is if you are using my cab.
smaberg said:
hmmm.... can you choose danish from the language in system settings sip?
what keys aint working, im using it in swedish and its working great, explain the bugs, and i'll try fixing them. that is if you are using my cab.
Click to expand...
Click to collapse
When I install the CAP-file, the au-button for special letters is disabeled.. how come..?
When you activate T9-keypad, how do you change from english to danish..?
sorry for my many questions...
danish-x1 said:
When I install the CAP-file, the au-button for special letters is disabeled.. how come..?
When you activate T9-keypad, how do you change from english to danish..?
sorry for my many questions...
Click to expand...
Click to collapse
in system, settings, input, advanced choose danish layout, then T9 should be right.
au key, let me work on it, seems like making a cab for x1 special letter should be worked on.
smaberg said:
in system, settings, input, advanced choose danish layout, then T9 should be right.
au key, let me work on it, seems like making a cab for x1 special letter should be worked on.
Click to expand...
Click to collapse
if you can make it work, I salute you!
zenkinz said:
if you can make it work, I salute you!
Click to expand...
Click to collapse
try this cab, its the symbolpad for X1 eng. rename o4o0....mui files to you lang. code ex swedish is 041D
smaberg said:
try this cab, its the symbolpad for X1 eng. rename o4o0....mui files to you lang. code ex swedish is 041D
Click to expand...
Click to collapse
dude, we talking about the ascent key, not the symbol key... I don't have problem with symbol key if I installed the Touchstone QWERTY keyboard SIP.
I don't think you can fix this problem (it's a side effect of trying to install another device's keyboard IME) but I would be more than happy to eat humble pie and be proven wrong
I upgraded touch HD with Duttys latest HD WM6.5 Leo R4 (nice as always) and noticed that letter recognizer disappeared!
I love this feature, is there any way to enable it again?!
I tried the enablerecognizerwwe.cab and altered the registry with no luck.
Please, any advise about this issue is greatly appreciated!.
you mean transcriber ?
never used transcriber before but i came across it and it seems a bit similar
i meant the block recognizer / letter recognizer
if transcriber will get me to write sms and emails like i used before using stylus then please advise how to install it.
am still hoping for the block recognizer though..am so used to it