Content not supported... - G1 General

So. While trying to use the G1 browser. I keep getting the message that the content (zip file) is not supported on the device. I know i remember seeing somthing about this and have searched the forums. I guess I've been running Hero roms so long, I haven't seen this message in quite some time.

It's simple. Install astro or download crutch and try try again..

Related

where did it go?

So I downloaded some ringtones from myxer.com they show up and play through the settings fine. But I can't find the actual files themselves. I've looked in the sd download area. And internal media file and the stock ringtone file. Does anyone know where it would be?
how did you 'download' them? browser? mms?
I just looked, looks like through MMS. What ROM are you using? If you have cupcake, just open the message that you got the file from and save to the SD card, and it will be in the download area. If you don't have a cupcake ROM, then you are missing out on some features.
I'm using haykuros apd 1.5hr3 rom. I downloaded it through the browser. I'm a little new but I know the basics and some advanced since I've bricked my phone repetedly time and time again through trial and error . But I just can't seem to find it. Someone should try to download a ringtone from myxer.com dirctly from the g1 and let me know if u can find it
I see what you mean dude, I'm trying to find it now too.
Hmm.... Usually if you download anything it ends up in the Downloads folder. Next time make a copy of it or move it to your SD Card if you can.
Also the technical term of "bricking" means the device has rendered itself useless (no boot, no recovery etc, won't turn on at all), effectively turning it into a paperweight, like a brick ^_- Most likely you've meant that the device has "boot looped" instead.
I only say this because people are not using the terms correctly, confusing others. Its like people on Windows saying they've got a "virus" when a program crashes... Most likely that isn't the case.
NeoBlade said:
Hmm.... Usually if you download anything it ends up in the Downloads folder. Next time make a copy of it or move it to your SD Card if you can.
Also the technical term of "bricking" means the device has rendered itself useless (no boot, no recovery etc, won't turn on at all), effectively turning it into a paperweight, like a brick ^_- Most likely you've meant that the device has "boot looped" instead.
I only say this because people are not using the terms correctly, confusing others. Its like people on Windows saying they've got a "virus" when a program crashes... Most likely that isn't the case.
Click to expand...
Click to collapse
Gotchya. Not bricking then. Infinate loop. Regardless, I've downloaded programs and roms dirctly from my g1 and using 2 sd cards flashed and etc. But this specifically doesn't go to the download folder

Home and messaging keep shutting down!

its happening alot in using cyanogen 1.4.11 on a 32b magic.theres a link on the cyanogen website that might fix it but its not working.
bumbum
Can you please explain more? Whats going on with what. That way we can help you
If I want to write a text message (usually when its important ) I click messaging and it doesn't open and crashes, forcing me to quit. The same thing happens when I I exit an app or come out of suspend. Also occupationally when I receive a call my phone doesn't come out of suspend and stays in suspend but the tracker ball remains flashing
this is the fix i wanted to try but the link doesnt work
http://www.cyanogenmod.com/downloads/mods/never-wipe-after-an-upgrade
already there
cramhead said:
this is the fix i wanted to try but the link doesnt work
http://www.cyanogenmod.com/downloads/mods/never-wipe-after-an-upgrade
Click to expand...
Click to collapse
fix_permissions is already embedded in the cyanogen 4.1.11.1 rom.
just open a terminal window and run the file (assuming you have root).
what do i type in terminal? Im sh1t at it
Me personally would just reflash the Rom>Theme since it sounds like something got corupted some how
I did a fresh install and the first thing I got on top on the android begin screen was "the application datatraker (process com.fvd.datatracker) has stopped unexpectedly please try again"
And you cleared your ext3 first?
I didn't know it was needed. Formatted and reinstalled now

Virgin rom.

I have looked and looked and maybe im just usnig the wrong words in seach but i havenet been able to find anything yet. I am looking for a virgin 1.5 rom that i can use to start freh and make my own rom to flash to my phone. Basically what I am looking for is a rom (not the RUU that puts a factory default on it) but the actual factory original rom before anyone has taken anytihg out or put on there own themes.
I have looked and looked. I find all kinds of roms to flash to my phone but all of them have been violated in some way or anouther. and although they are nice i would rather do it myself than use someone elses.
If this is already discussed somewhere please link me to it and i am sorry but i havent found it.
Thanx in advance for any help anyone can give me.
This might be what your looking for..
http://forum.androidcentral.com/sprint-htc-hero-roms/6699-cdma-hero-rom-gumbo-rom-1-5c.html#post41536
Check in the sticky wiki for available roms
Yeah me too! Damn all these promiscuous ROMs
Wouldn't doing an RUU and then rooting give you what you want?
casperlt1 said:
This might be what your looking for..
Check in the sticky wiki for available roms
Click to expand...
Click to collapse
This gives you gumbo wich has stuff removed and added I want what gumbo based his off of not what gumbo did too it so to speak. Not that I dont like gumbo but he removed things I want virgin before that.
I have checked all of the roms on the wiki page and all have something done to them.
Where is the one that says here is the stock rom from sprint with nothing done to it.
justinisyoung said:
Wouldn't doing an RUU and then rooting give you what you want?
Click to expand...
Click to collapse
No, doing the ruu from what I understand installs the factory original to the phone. I want it before it goes into the phone so I can modify it before it goes to the phone. Also I would like to re install the rom whenever I want but using the RUU i would have to use the RUU next time and the update it again.
Tipharet said:
Yeah me too! Damn all these promiscuous ROMs
Click to expand...
Click to collapse
HeHeHe. Thats funny!!!
This has to be out there. Basically I want a rom that if I flashed it to the phone would be no different than if I bought a new phone from sprint and turned it on.
You cant tell me everyone that roots their phone wants other than stock rom on it.
@ cammel, I agree with justinisyoung
theres not much more to it.
just flash an RUU and root it. this will provide the base files you need for your stock rom.
david7586 said:
@ cammel, I agree with justinisyoung
theres not much more to it.
just flash an RUU and root it. this will provide the base files you need for your stock rom.
Click to expand...
Click to collapse
Ok, say I do the RUU how do I get the rom off the phone to edit it?
I think what youre talking about doing would be creating a signed update zip. While I dont know how to do it those are probably the key words you'd need to search to find the answers youre looking for. Hope that helps!
cammel8 said:
Ok, say I do the RUU how do I get the rom off the phone to edit it?
Click to expand...
Click to collapse
To my understanding the RUU is not a ROM.
It is a return to factory default. You would typically use this option when you needed to take your phone in for repair to the store or to get it back to stock.
So after your run the RUU, you would then root your phone using the method of your choosing, and then you would have what you are asking for.
When you download the RUU, there is a file called rom.zip
That's what you're looking for.
HERNANDEZ4LIFE said:
I think what youre talking about doing would be creating a signed update zip. While I dont know how to do it those are probably the key words you'd need to search to find the answers youre looking for. Hope that helps!
Click to expand...
Click to collapse
I know how to creat a signed update zip I do that alot. I need a rom to sign.
ccapasso said:
To my understanding the RUU is not a ROM.
It is a return to factory default. You would typically use this option when you needed to take your phone in for repair to the store or to get it back to stock.
So after your run the RUU, you would then root your phone using the method of your choosing, and then you would have what you are asking for.
Click to expand...
Click to collapse
Yes you are correct that the phone would be back to original. But then how do i get that to my computer to edit it?
Also with this method I would have to re root my phone.
Plus Ive heard that you can brick your phone with the RUU with a 110 error thats unbrickable. not exactly fond of that idea.
abcdfv said:
When you download the RUU, there is a file called rom.zip
That's what you're looking for.
Click to expand...
Click to collapse
In th rom.zip there is a bunch of img files. im guessing if i tried to use that it would error out on me. I need the one with like sytem fioles and stuff I can edit.
You cant tell me this isnt out there. People have been modding this rom since it came out. So there has to be an untouched original somewhere to wich you can base your work off of. Otherwise that would meen everyone bases there work off of other peoples and never start from scratch. Is that really the case? Am I the first that wants a fresh rom to start with and build from there?
Contained in the image files is what you're look for.
abcdfv said:
Contained in the image files is what you're look for.
Click to expand...
Click to collapse
Ok I have tried extracting info out of the img files with powerISO, magicISO, imageburn, IrfanView, XnVview and Iso buster. But all of them say it is the wrong format.
I have seen multiple threads that link to a how to extract the files using unyaffs and ubuntu but I dont have ubuntu.
So I now have two questions:
First
Is it possible to extract files from an img file using window (windows 7 to be exact) and if it is possible what program would I use.
Second
Is there a tutorial out there Im missing?
Sorry If im being a pain in the A** about this and I usually figure stuff out on my own but this one is really givin me a headache. I have been working for three days on this one and its really getting to me.
If anyone can help me I would Appreciate it.
And thanx to everyone that has tried to help so far. Every time I get an answer that doesnt work it just meens Im one step closer to finding one that does so thanx everyone.
http://jiggawatt.org/badc0de/android/index.html
Here is a good place to get started.
What you're interested atm is the unyaffs program.
Google and forum search are really useful tools and the answers to your questions are out there. Just not packaged nice and neat like you would want.
Here's the jist of what you need to get started.
1. Android SDK
2. Java JDK
3. android zip signing tool
4. unyaffs utility
5. RUU
6. start RUU
7. let it go all the way just before the point where it actually starts to flash your phone.
8. check your computers temp folder for the system.img
9. unpackage it using unyaffs
10. enjoy naked young virgin
11. zip devirgined rom back up
12. sign it
13. flash it
14. fix bugs, rinse, repeat
15. try and search next time.
16. sorry about the crankiness, had a lousy day at work.
hope my step-by-step while not overly detailed was helpful.
are you looking for AOSP? or do you want Sense UI and all that stuff? RUU Includes Sense
obelisk79 said:
Google and forum search are really useful tools and the answers to your questions are out there. Just not packaged nice and neat like you would want.
Here's the jist of what you need to get started.
1. Android SDK
2. Java JDK
3. android zip signing tool
4. unyaffs utility
5. RUU
6. start RUU
7. let it go all the way just before the point where it actually starts to flash your phone.
8. check your computers temp folder for the system.img
9. unpackage it using unyaffs
10. enjoy naked young virgin
11. zip devirgined rom back up
12. sign it
13. flash it
14. fix bugs, rinse, repeat
15. try and search next time.
16. sorry about the crankiness, had a lousy day at work.
Click to expand...
Click to collapse
Ok I understand your cranky, but maybe you should give a person the benefit of the doubt before assuming they are an idiot. Remember what they say, when you assume you make an ass out of you and Uma Thurman.
So I rooted my phone on Friday. I then proceeded to download every rom on the site, and see what all there was available. I'm guessing the same thing everyone does when they first root it. By Saturday morning, after reading a bunch of stuff on here, I decided I was going to do My own mods to the rom. Yes the others out there are nice but they are not mine.
The first thing I did was to make My own animated boot screen (I decided on a naked pink female android instead of the stupid green one that comes stock. So I worked for hours and hours on that. Finally got it all done, uploaded it and it didn't work. (Come to find out the program I was using to make the GIF, "Easy GIF Animator", which I use for websites all the time, was putting extra stuff into the header that the HTC didn't know how to deal with. Just use gimp to make it and you are fine.) So now I have a working animated boot sequence of my own. (All from searching.)
Out of all of the themes I had seen done so far, I really liked the Aloysius because of the way the launch bar was made. I wanted to do that. So I researched some more and found out how to edit the APK files in the framework so I could change stuff. So I went about changing all the stuff I wanted to change. The Icons, the little Icons at the top, the buttons on the bottom. Anything I could change.
Yeah me, I have a bunch of stuff now that I can make an update file with so I can update my phone. I throw it all in a file, name it update, and flash it, but it won't work. After some more searching I find out that I have to sign the file before I can update it to the phone. This wasn't an issue before with the boot screen so I search find out how to do that and, wa la, I have a new theme all mine. (All from searching.)
So then I decide, well everyone else is adding and removing files, couldn't be that hard, so I did some searching and what do you know it isn't hard at all. So I added the programs I always have on my phone, and now when I flash it, it is all ready to go. Wee, now we are talking. (All from searching.)
Then I start playing with some of the apps, and realize that any app that sends out an sms by itself wouldnt send text messages. (IE: sms bomber, SMS my location, wavesecure) the program acts like it is working but then doesn't actually send the message. So I do some more searching. Come to find out Most of the roms on the site have stuff removed. It must be one of the apps removed or settings that were changed has something to do with it. Worked before installing the rom, don't work after installing the rom must be something in the rom, that or something I did to the rom afterward. So I do a fresh install of Aloysius and add sms bomber and it won't work. Must be Aloysius. (some from searching some from trial and error.)
So I decide I am just going to get the original rom, since I don't need any of the stuff in Aloysius because I have replaced most of it with my own anyway, and the apps I like in it, I can just add myself. So I search and search for a Virgin rom. Can't find one anywhere. Figure well maybe I can just pull the rom from my phone by copying the directory structure. So I re-flash my original backup and try pulling the files that way. I get them off the phone, add them to a zip file, name it update, and put it on my phone and go to flash it back to see if it works. Epic Fail. After searching some more I find out that you have to have a script to tell it what to install and where so I learn through searching how to make a update-script file, throw it in the META-INF folder in its right place zip the two folders up sign them and put them on my phone. In case you were wondering it didn't work. come to find out, after doing some searching you cant do that. Maybe I should have searched that one before just jumping in on that one. Eh, live and learn I guess.
So I search and search for the not so ever present virgin rom. Apparently, if it is out in the wild, it is a well hidden secret cause I can't find it. (still cant) Finally after hours and hours of searching, I give up and ask for help finding it. Yes thats right I asked for help. Well that ask didn't exactly garner me a here is a link just follow it and you can download your prize. No instead I find out that it isn't out there. Not in rom form at least.
There are ones that are close but nothing completely virgin. Why waste my time on those when They might have something I need removed and I don't even know it. Finally ABCDFV tells me its in the RUU in the Rom file Packed into an IMG file. Not exactly a rom but close enough that, I'm guessing, it's the closest I will get. So now All I have to do is unpack it and be done with it. Yeah me. I have unpacked stuff before this should be a synch. Mind you that was at 2 pm.
So I use every program I can think of that are used for opening IMG files, and none of them work so I search the internet and find butt loads more, but they don't work either so I do more searching and find out that the IMG files that are packed in the roms are special and can't be opened in the normal ways.
So after more searching I find many tutorials on how to unpack the files but all of them are in ubuntu. Well I'm running windows 7 so that won't work. I search and search and can't find a windows program to save my life so I reserve myself to having to use Linux.
I go to my back room and find an old 700 mhz computer, download ubuntu, and install it. Get all of my files, take them to the other computer, and start reading the tutorials. This is when I realize that I have no freaking clue what I am doing in Linux. Sure I have played with it but I don't use it like this. I get to the first command in all of the tutorials and it says type "gcc -o unyaffs unyaffs.c" but not one of them say where to type it. (come to find out it's in terminal. would it really kill the people that made the tutorials to put that little tidbit itn there. go ahead look not one of them I saw asid open terminal thay just say type this) so I go back and search that to find out. after I finally get that figured out, I realize that not one of these tutorials on how to do this is complete. Sure they might be complete to someone that knows UBUNTU but not to me. After hours and hours of searching and trying and failing I finally get fed up with UBUNTU. That was at about 9 o clock.
I disconnect the computer, take it outside, and shoot the damn thing with my 12 gauge. That's right I shot it. No joke. No it didn't help me to unpack the file. No it wasn't logical, reasonable or even rational, but damn it I felt better. Seeing them little green pieces of pcb flying, and knowing I would never be defeated by this computer or operating system again was almost blissful.
I came back in, and through utter frustration and dismay, haven been beaten by a fricken IMG file I again ask for help. That is when ABCDFV showed me the link to the X86 version of unyaff. Yes, finally my worries are over. I download it drag the system.IMG file to it and it pops up a message. "cygwin1.dll file is missing." You have got to be fu**ing kidding me. So back to searching I go. Come to find out it is a file used on windows machines so you can run Linux programs. I JUST SHOT LINUX AND IT IS COMING BACK TO HAUNT ME, I KNOW IT NOW. So I go to the website for cygwin and wouldn't you know it, there isn't a file like that on their server just an exe file that loads something. Screw it, I'll load it. So I download it install it, which mind you it says will fix the problem. And guess what, it didn't fix it.
So after searching and searching I find a website that has it. Sure there are about 50 gazillion that had it but I wanted one that didnt charge me, or want me to install there stupid program to get it. I get the file and install it.
30 seconds later and I am looking at the ever so hard to find, "virgin rom". Well not exactly. It is not a rom yet but I have everything else I need to make the rom so Might as well be the rom. I make my update-script put it in with it, zip it, sign it and send it to my phone.
I flash it to my phone, the whole time it is going, I'm just praying it will work. Verifying, verifying, Come on, copying files, yes its working! Finished. I can't fu**ing believe it. After everything, I finally have it, my own virgin rom. Yes, yes, oh freakin yes, everything is right in my world again.
Only one thing left to do, reboot phone. I hit the reboot and it blinks off. A second later HTC. A minute later Still HTC. It's ok sometimes when you flash a new rom it takes a while. 15 minutes later still HTC. YOU HAVE GOT TO BE FREAKIN KIDDING ME. So I reboot and get the same thing. Apparently there is something I am missing. Don't know what yet, I'm sure something I read will hold the answer, but I sure as sh*t aint doing it tonight.
That is when I came back on. I figured the least I could do was to thank ABCDFV for helping me get this far. That is when I seen your post. To tell you the truth, It pi**ed me off. Where do you come off telling me to do a little searching and I can find it. That is all I have been doing the last three days is searching. and not finding Sh*t might I add. there is a whole bunch of stuff but nothing that directly relates to what I need.
I dont think I am doing that bad either, I have taught myself all of this in the matter of four days by serching. I know people that have been rooting their Phones since G1 and dont know half of what I know now. And I have only been doing it for 4 days. So I dont think I am doing that bad. Especially since I have only had to ask one question and then a follow up.
Apparently you were born with all of the HTC Hero information and never needed to ask anyone a question about it ever, and that is all well and good, but people like me have to ask every once in a while for a little help.
I thought that is what this forum was for.
I am sorry if I am not another script kiddy that is ok with other people making stuff and me just throwing it on my phone and calling it my own.
I am sorry if I don't want to say to someone look what someone else did and I was able to install it on my phone just like your 11 year old neighbor can do to his phone by reading a tutorial or watching it on youtube. (Sh*t I never even thought of youtube. Probly somthing on there I could have watched instead of reading it. Oh well maybe next time.)
I am sorry if I want to do something from scratch instead of using other peoples work.
I am sorry if I want to be able to say look what I did.
Maybe you are Ok with that, maybe you're not, But I sure as hell am not. And I don't know you from Adam. You may be the person that first came out with all of the stuff that makes this possible, or you may be just another script kiddy happy to install others work, I don't know. I am sure after I am done here I will find out, but to do that I have to search and I'm not into that right now.
But next time you want to go off on a rant to someone, maybe you shouldn't assume they haven't done anything, and are just looking for a handout. Maybe you should just help them. Maybe If someone would have said in the beginning of my thread that the virgin rom doesn't exist, and you have to rip it from the RUU and there is no other way I wouldn't have spent the last 24 hours trying to figure it out.
This isn't my first time at a rodeo you know, just my first time on this bull. I am a member of many forums for many different things. And usually people come to me for help cause they are too lazy to search, and I would understand If I would have asked what is a rom an how do I root my phone. Or something simple covered hundreds of times in the forums elseware but I didn't.
Not only did I ask for help with something that is obviously nonexistent or close to it but I asked for a link so I could go in the right direction. I didnt just automatically ask where is it and what do I do with it. I want to learn so I can teach others. I want to learn so when someone asks why won't this work, I can tell them why, instead of "I don't know, it just don't work" I want to understand what I am doing, not just do it for the sake of doing it.
So as far as your crankiness goes, Sorry if I made you cranky, but maybe if you are cranky cause someone wants help, you shouldn't be on a forum that is for helping people. Because it is just going to make you more cranky. Just a thought.
So that is it for my rant. Sorry it was so long but I had to get that out. Now onto what I came here for originally :
abcdfv said:
link to unyaffs program
Here is a good place to get started.
What you're interested atm is the unyaffs program.
Click to expand...
Click to collapse
Thanks dude That worked Awesome. I had to find a file for it but it worked like a charm. I didnt get my rom to work yet But cause of you I am a Huge step closer. I got it out of the RUU, got it on the phone now it wont boot so I just have to figure out why. but that is for anouther day, Im going to sleep. But thank you for finding that for me. I coulndt find it at all. Thank you, Thank you, Thank you, Thank you, Thank you!!!
Congrats. Sorry I wasn't so specific first time around. Forgot it was in .img contained as yaffs.
cammel8 said:
Ok I understand your cranky but maybe you should give a person the benefit of the doubt before assuming they are an idiot. Remember what they say, when you assume you make an ass out of you and Uma Thurman.
So I rooted my phone on Friday. I then proceeded to download every rom on the site and see what all there was available. I'm guessing the same thing everyone does when they first root it. By Saturday morning after reading a bunch of stuff on here I decided I was going to do My own mods to the rom. Yes the others out there are nice but they are not mine.
The first thing I did was to make My own animated boot screen (I decided on a naked pink female android instead of the stupid green one that comes stock. So I worked for hours and hours on that. Finally got it all done uploaded it and it didn't work. (Come to find out the program I was using to make the GIF, Easy GIF Animator, which I use for websites all the time, was putting extra stuff into the header that the HTC didn't know how to deal with. just use gimp to make it and you are fine.) So now I have a working animated boot sequence of my own. (All from searching.)
Out of all of the themes I had seen done so far I really liked the Aloysius because of the way the launch bar was made. I wanted to do that. So I researched some more and found out how to edit the APK files in the framework so I could change stuff. So I went about changing all the stuff I wanted to change. The Icons the little Icons at the top, the buttons on the bottom. Anything I could change.
Yeah me I have a bunch of stuff now that I can make an update file with so I can update my phone. I throw it all in a file name it update and flash it but it won't work. after some more searching I find out that I have to sign the file before I can update it to the phone. This wasn't an issue before with the boot screen so i search find out how to do that and wa la I have a new theme all mine. (All from searching.)
So then I decide well everyone else is adding and removing files couldn't be that hard so I did some searching and what do you know it isn't hard at all so I added the programs I always have on my phone and now when I flash it, it is all ready to go. Wee now we are talking. (All from searching.)
Then I start playing with some of the apps and realize that any app that sends out an sms by itself wound send text messages. (IE: sms bomber, SMS my location, wavesecure) the program acts like it is working but then doesn't actually send the message. So I do some more searching. Come to find out Most of the roms on the site have stuff removed. It must be one of the apps removed or settings that were changed has something to do with it. Worked before installing the rom, don't work after installing the rom must be something in the rom, that or something I did to the rom afterward. So I do a fresh install of Aloysius and add sms bomber and it won't work. Must be Aloysius. (some from searching some from trial and error.)
So I decide I am just going to get the original rom, since I don't need any of the stuff in Aloysius because I have replaced most of it with my own anyway and the apps I like in it I can just add myself. So i search and search for a Virgin rom. Can't find one anywhere. Figure well maybe I can just pull the rom from my phone by copying the directory structure. So I re-flash my original backup and try pulling the files that way. I get them off the phone add them to a zip file name it update and put it on my phone and go to flash it back to see if it works. Epic Fail. After searching some more I find out that you have to have a script to tell it what to install and where so I learn through searching how t make a update-script file, throw it in the META-INF folder in its right place zip the two folders up sign them and put them on my phone. In case you were wondering it didn't work. come to find out after doing some searching you cant do that. Maybe I should have searched that one before just jumping in on that one. Eh live and learn I guess.
So I search and search for the not so ever present virgin rom. Apparently, if it is out in the wild, it is a well hidden secret cause I can't find it. Finally after hours and hours of searching, I give up and ask for help finding it. yes thats right I asked for help. Well that ask didn't exactly garner me a here is a link just follow it and you can download your prize. No instead I find out that it isn't out there. Not in rom form at least.
There are ones that are close but nothing completely virgin. Why waste my time on those when They might have something I need removed and I don't even know it. Finally ABCDFV tells me its in the RUU in the Rom file Packed into an IMG file. Not exactly a rom but close enough that, I'm guessing, it's the closest I will get. So now All I have to do is unpack it and be done with it. Yeah me. I have unpacked stuff before this should be a synch. Mind you that was at 2 pm.
So I use every program I can think of that are used for opening IMG files and none of them work so I search the internet and find butt loads more but they don't work either so I do more searching and find out that the IMG files that are packed in the roms are special and can't be opened in the normal ways.
So after more searching I find many tutorials on how to unpack the files but all of them are in ubuntu. Well I'm running windows 7 so that won't work. I search and search and can't find a windows program to save my life so I reserve myself to having to use Linux.
I go to my back room and find an old 700 mhz computer download ubuntu and install it. get all of my files take them to the other computer and start reading the tutorials. this is when I realize that I have no freaking clue what I am doing in Linux. Sure I have played with it but I don't use it like this. I get to the first command in all of the tutorials and it says type "gcc -o unyaffs unyaffs.c" but not one of them say where to type it. (come to find out it's in terminal) so I go back and search that to find out. after I finally get that figured out I realize that not one of these tutorials on how to do this is complete. Sure they might be complete to someone that knows UBUNTU but not to me. After hours and hours of searching and trying and failing I finally get fed up with UBUNTU. That was at about 9 o clock.
I disconnect the computer and take it outside and shoot the damn thing with my 12 gauge. That's right I shot it. No joke. No it didn't help me to unpack the file. No it wasn't logical, reasonable or even rational, but damn it I felt better. seeing them little green pieces of pcb flying and knowing I would never be defeated by this computer again was almost blissful.
I came back in and through utter frustration and dismay. haven been beaten by a fricken IMG file I again ask for help. That is when ABCDFV showed me the link to the X86 version of unyaff. yes finally my worries are over. I download it drag the system.IMG file to it and it pops up a message. "cygwin1.dll file is missing." You have got to be fu**ing kidding me. So back to searching I go. Come to find out it is a file used on windows machines so you can run Linux programs. I JUST SHOT LINUX AND IT IS COMING BACK TO HAUNT ME I KNOW IT NOW. So i go to the website for cygwin and wouldn't you know it there isn't a file like that on their server just an exe file that loads something . screw it ill load it so i download it install it, which mind you it says will fix the problem. and guess what, it didn't fix it.
So after searching and searching I find a website that has it. Sure there are about 50 million that had it but I wanted one that didnt charge me or want me to install there stupid program to get it. I get the file and install it.
30 seconds later and I am looking at the ever so hard to find, "virgin rom". well not exactly. It is not a rom yet but I have everything else I need to make the rom so Might as well be the rom. I make my update-script put it in with it, zip it, sign it and send it to my phone.
I flash it to my phone the whole time it is going I'm just praying it will work. Verifying, verifying Come one copying files, yes its working! finished. I can't fu**ing believe it. After everything I finally have it my own virgin rom. Yes, yes, oh freakin yes, everything is right in my world again.
Only one thing left to do, reboot phone. I hit the reboot and it blinks off. A second later HTC. A minute later Still HTC. It's ok sometimes when you flash a new rom it takes a while. 15 minutes later still HTC. YOU HAVE GOT TO BE FREAKIN KIDDING ME. So I reboot same thing. Apparently there is something I am missing. Don't know what yet, I'm sure something I read will hold the answer but I sure as sh*t aint doing it tonight.
That is when I came back on. I figured the least I could do was to thank ABCDFV for helping me get this far. that is when I seen your post. To tell you the truth It pi**ed me off. Where do you come off telling me to do a little searching and I can find it. That is all I have been doing the last three days is searching.
I dont think I am doing that bad either I have taught myself all of this in the matter of four days by serching. I know people that have been rooting there Phones since G1 and dont know half of what I know now and I have only been doing it for 4 days. So I dont think I am doing that bad. Especially since I have only had to ask one question and then a follow up.
Apparently you were born with all of the HTC Hero information and never needed to ask anyone a question about it ever, and that is all well and good, but people like me have to ask every once in a while for a little help.
I thought that is what this forum was for.
I am sorry if I am not another script kiddy that is ok with other people making stuff and me just throwing it on my phone and calling it my own.
I am sorry if I don't want to say to someone look what someone else did and I was able to install it on my phone just like your 11 year old neighbor did to his phone.
I am sorry if I want to do something from scratch instead of using other peoples work.
I am sorry if I want to be able to say look what I did.
Maybe you are Ok with that maybe you're not But I sure as hell am not. And I don't know you from Adam. You may be the person that first came out with all of the stuff that makes this possible or you may be just another script kiddy happy to install others work, I don't know. I am sure after I am done here I will find out but to do that I have to search and I'm not into that right now.
But next time you want to go off on a rant to someone maybe you shouldn't assume they haven't done anything and are just looking for a handout. Maybe you should just help them. Maybe If someone would have said in the beginning of my thread that the virgin rom doesn't exist and you have to rip it from the RUU and there is no other way I wouldn't have spent the last 24 hours trying to figure it out.
This isn't my first time at a rodeo you know just my first time on this bull. I am a member of many forums for many different things. And usually people come to me for help cause they are too lazy to search, and I understand If I would have asked what is a rom an how do I root my phone. Or something simple covered hundreds of times in the forums else ware but I didn't.
Not only did I ask for help with something that is obviously nonexistent or close to it but I asked for a link so I could go in the right direction. I didnt just automatically ask where is it and what do I do with it. I want to learn so I can teach others. I want to learn so when someone asks why won't this work I can tell them why instead of "I don't know, it just don't" I want to understand what I am doing not just do it for the sake of doing it.
So as far as your crankiness goes Sorry if I made you cranky but maybe if you are cranky cause someone wants help you shouldn't be on a forum that is for helping people. Because it is just going to make you more cranky. Just a thought.
So that is it for my rant. Sorry it was so long but I had to get that out. now onto what I vcame here for originally :
Thanks dude That worked Awesome. I had to find a file for it but it worked like a charm. I didnt get my rom to work yet But cause of you I am a HUge step closer. I got it out of the ruu got it on the phone now it wont boot so I just have to figure out why. But thank you for finding that for me I coulndt find it at all. Thank you, Thank you, Thank you, Thank you, Thank you!!!
Click to expand...
Click to collapse
Holy **** I didn't read one word that.
Good luck man!

Nook CM7-on-SD

I'm trying to load up the gapps ZIP, to get Market and my Google apps going.
1. The whole "press and hold for X seconds" on the power/n buttons ain't working too well for me. The thing keeps just loading normally or rebooting cuz I hold power too long or something).
2. When inside CM7, and I choose Reboot/REcovery, it actually skips the SD entirely and loads me into the original B&N on the machine itself. Derp.
I followed these instructions for installing CM7
http://forum.xda-developers.com/showthread.php?t=1000957
using the update-cm-7.0.0-encore-signed.zip as recommended by quinxy here:
http://quinxy.com/2011/04/01/comple...on-the-nook-color/comment-page-3/#comment-944
So, any tips or ideas on how to get into recovery (it's a CM7 install on SD) so I can put in Market and GAPPS?
I also noticed that when it boots, I'm in some black screen always and have to click power twice to actually get the CM7 desktop to show. Whassup with that?
edit: also, is there harm with installing CWM from ROM manager in this CM7 SD card install? Will it install it to the SD card, or to the Nook Color itself? Will it dork things up? I want to keep them separate (B&N on the machine, CM7/GB on the SD). Is this the reason I can't get into any kind of recovery mode, because I don't have CWM installed?
Which build of CM7 are you running? The more recent nightlies made the reboot into recovery process easier.
SonicClang said:
Which build of CM7 are you running? The more recent nightlies made the reboot into recovery process easier.
Click to expand...
Click to collapse
I'm really not sure -- I grabbed the one I was told to do in the post at:
http://quinxy.com/2011/04/01/comple...on-the-nook-color/comment-page-3/#comment-944
with a direct link to update-cm-7.0.0-encore-signed.zip, whatever that is. The file is here:
http://mirror.teamdouche.net/get/update-cm-7.0.0-encore-signed.zip
Since creating an install to SD is so brain-dead simple, I'm happy to switch over to something else if needed.
What about CWM? If I go to ROM manager, it tells me CWM isn't installed. If I install it - is it putting it to the SD or the machine itself? I'd really love to keep it internally clean, all on the SD.
You should be running at least the latest stable build, 7.0.3. If you're more daring, like me, you can install the latest nightly, which may in the 100's now (I haven't checked in a couple days).
I honestly haven't done anything in ROM manager yet so I can't offer any advice there. I've had problems with it and don't care eenough to troubleshoot. I use Win32imager to make img backups of my install.
SonicClang said:
You should be running at least the latest stable build, 7.0.3. If you're more daring, like me, you can install the latest nightly, which may in the 100's now (I haven't checked in a couple days).
I honestly haven't done anything in ROM manager yet so I can't offer any advice there. I've had problems with it and don't care eenough to troubleshoot. I use Win32imager to make img backups of my install.
Click to expand...
Click to collapse
I just went here:
http://download.cyanogenmod.com/?device=encore
and grabbed the top one, cm_encore_full-106.zip, and it is installing to the card now, we'll give it a shot and see how well it works. I'm *assuming* these are all CM7.
edit: I got a different boot splash screen than the previous one, so that's a bonus. Nicer boot animation. Crossing fingers that it doesn't start up in sleep mode like the other build package did (always had to toggle power button to get the desktop to show after a boot). Yar, desktop!
OK, now to see if this thing will reboot into recovery....
Yup, that should do it. Didn't realize we were up to 106 already!! CM7 is short for Cyanogen mod 7, so yes, they're all CM7 See how 106 works for you.
SonicClang said:
You should be running at least the latest stable build, 7.0.3. If you're more daring, like me, you can install the latest nightly, which may in the 100's now (I haven't checked in a couple days).
I honestly haven't done anything in ROM manager yet so I can't offer any advice there. I've had problems with it and don't care eenough to troubleshoot. I use Win32imager to make img backups of my install.
Click to expand...
Click to collapse
You're a genius - it was a crappy build of CM7 I must've flashed first. The latest did the trick. Nice boot anim, came right to desktop, rebooting into recovery picked up the gapps zip and installed it.
Thanks for the advice. I'll make a restore point with Win32Image thingy now. Thanks again for your help.
You're welcome. Make sure to "thank" me. I just started posting here and wouldnt mind a little color on my thank o meter
I'm not a genuis, that would be the guys who made cm7. I'm nowhere near that smart.
SonicClang said:
You're welcome. Make sure to "thank" me. I just started posting here and wouldnt mind a little color on my thank o meter
I'm not a genuis, that would be the guys who made cm7. I'm nowhere near that smart.
Click to expand...
Click to collapse
I was going to - but can't figure out where the Thank button went, it's not showing up on any posts I see in this thread. :-/
screenshot:
http://i.imgur.com/BNLb9.png
START SCREENSHOT:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
END SCREENSHOT:
Ha! I have no idea, like I said, I just started posting here so I have no idea how to do it either. Maybe someone smarter than I will post with the answer.
Well, GAPPS is installed -sort of- but now stuck at "SETUP WIZARD" at the top whenever I boot the nook. Softkeys are not responding, the only thing that does is the notifications pulldown. No desktop, just a big fat "SETUP WIZARD" at the top, and black screen.
Grrr.
edit: Rebooted it, and now have a nice normal set up screen. Yay.
Maybe an obvious question, but did you make sure to setup your WiFi connection before installing the gapps? One time I was in a hurry and installed gapps before setting up my WiFi and I had to start over
I did that twice already, but even with setting up wifi, i got that setup wizard glitch (which went away when I simply rebooted). It looked a lot like a set up screen for gapps that didn't render quite right. It's probably an artifact from being on the most bleeding edge nightly....
it's all up and running though, and looking very nice. love the fact it's all on the SD - so very, very nice.
I'm glad you got it working. I think I got that weird gapps glitch one time but yeah, it goes away after a reboot.
I too LOVE that it's all off the SD card. My daughter (3) likes a couple apps that I have on the Barnes and Noble interface, so about once a week I boot into that (its horrid by the way once you've been running CM7 for a while). I'm going to be helping a friend get CM7 on his viewsonic g tablet this weekend and thats a full flash to main memory install. Makes me a bit more neervous but it looks pretty straight forward.
By the way, I highly recommend Launcher Pro, with the unlocker (a couple bucks). it makes everything soooooo smooth.
I use LP on my EVO (running rooted w/a cleaned up Sense ROM w/o any sprint bloat). I love it. I find GO launcher, ADW and LP all have very similar features.
I have a few paid apps (Titanium Backup, Root Explorer, Beautiful Widgets) - that I bought with the Evo and are working here, was able to DL and install them from Market - so that's handy.
Although "Move to SD Card" seems sorta "huh, wha?" now.
I haven't overclocked my nook yet - think it's something I should do? I read about some kernel tweak to kick it up to 1.1GHz. The final thing I need to do is get Netflix working on here, then I'll be content.
I'm running LP on my HTC Desire and its awesome. not necessarily better than sense, but its fresh, like a new phone almost.
I have NO idea what "move to SD card" does if you're running on an SD card. I'd love an explanation from someone on that.
I can help you get Netflix going if you need help. That's my number one favorite app on my Nook Color. That alone made installing CM7 worth it. Nothing better than sitting in bed at night watching movies on it.
Oh yeah, under Cyanegon Mod settings, find tablet tweaks (careful, dragons ahead), and you can easily overclock the CPU to 925 MHz right there. I don't know a way of setting it higher while running off an SD card. If you figure it out, point me in the right direction please?
SonicClang said:
I'm running LP on my HTC Desire and its awesome. not necessarily better than sense, but its fresh, like a new phone almost.
I have NO idea what "move to SD card" does if you're running on an SD card. I'd love an explanation from someone on that.
I can help you get Netflix going if you need help. That's my number one favorite app on my Nook Color. That alone made installing CM7 worth it. Nothing better than sitting in bed at night watching movies on it.
Oh yeah, under Cyanegon Mod settings, find tablet tweaks (careful, dragons ahead), and you can easily overclock the CPU to 925 MHz right there. I don't know a way of setting it higher while running off an SD card. If you figure it out, point me in the right direction please?
Click to expand...
Click to collapse
I wouldn't mind some help getting Netflix going, if you would please. I noticed it's not even appearing in the Market (I think Market changed a bit to filter out unsupported apps now).
As far as moving to SD card - I did notice a few glitches. Things like moving Facebook caused Facebook's contact/feed syncing to break and vanish. I suppose anything that needs background processes are going to be flakey. There were other ones, like Word for Friends that also glitched on me. I just moved them back to "phone" and they worked again.
Not really pressed for space - but yeah, minor bugs there.
So....netflix?
Found an APK I was able to side-load, but Netflix is all chipmunk-y!
Someone has a download link to the apk file on these forums. Look around for that. Tell your Nook to install third party apps. Install the program after downloading that.
Install Root Explorer and allow it super user access. Open up the system folder and mount r/w. Open up build.prop in the text editor. Change the following lines to match this.
ro.product.model=HTC Vision
ro.product.manufacturer=HTC
The first one normally says NookColor and the seconds says bn.
save the file and restart the device. Netflix should work like a charm, and best of all, the Android Marketplace does not break. Although the market will think you have an HTC Vision
Modifying the build.prop file fixes the chimpmonk problem by the way.
SonicClang said:
Someone has a download link to the apk file on these forums. Look around for that. Tell your Nook to install third party apps. Install the program after downloading that.
Install Root Explorer and allow it super user access. Open up the system folder and mount r/w. Open up build.prop in the text editor. Change the following lines to match this.
ro.product.model=HTC Vision
ro.product.manufacturer=HTC
The first one normally says NookColor and the seconds says bn.
save the file and restart the device. Netflix should work like a charm, and best of all, the Android Marketplace does not break. Although the market will think you have an HTC Vision
Modifying the build.prop file fixes the chimpmonk problem by the way.
Click to expand...
Click to collapse
For some reason, Root Explorer (and SU) don't think it's rooted. I see SU installed and when I launch it, it tries to update itself, and says something like "failed to update, probably from not being rooted - zip put on sd card, flash it in recovery."
Root Explorer doesn't give me my usual option to flip to R/W mode and edit files. I tried installing Busybox, too - and that thing complained about not being rooted as well.
So, dunno why - but this doesn't seem to think it's rooted. Odd, considering it all exists on the SD card.
Any clues?

Revolutionary Problems

am the only one getting this error message when downloading it ?
"C:\Users\OFWMFSKTADGAF\Downloads\revolutionary-0.4pre4(1).zip.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator."
chrisbluejames said:
am the only one getting this error message when downloading it ?
"C:\Users\OFWMFSKTADGAF\Downloads\revolutionary-0.4pre4(1).zip.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator."
Click to expand...
Click to collapse
Never saw that error, there seems to be a rash of problems with downloads
using certain browsers on certain webservers. Try saving the file to a specific
location (ie: desktop), and manually typing a filename (ie: revolutionary.zip).
If not, download a different web browser and try that.
Hard to troubleshoot an exact windows issue without having physical access
to the computer. I could email you the revolutionary file, as I didn't have
problems downloading it, but it'd be better to sort out the issue you are having first.

Categories

Resources