Related
Maybe a good idea maybe not but since google code was abolished i can't find a thing. Here is a link to an all in one flashable installation of cupcake everything is working gps, market, sms calls etc. I found that the touchscreen may not work on first install just soft reset device and all will work on next reboot. Please follow suit for whatever releases you have thanks. I take no credit in any of the work in the rom biuld we know who these acknowledgements go to.
cupcake 1.5 google-ion 9-12-09
http://www.mediafire.com/?0zniavwqg2m
All files included in zip including voguimg needed to flash nothing else needed just unzip to storage card and enjoy!!!
I will add more links in this post as people add them!!!!
mush2699 said:
Maybe a good idea maybe not but since google code was abolished i can't find a thing. Here is a link to an all in one flashable installation of cupcake everything is working gps, market, sms calls etc. I found that the touchscreen may not work on first install just soft reset device and all will work on next reboot. Please follow suit for whatever releases you have thanks. I take no credit in any of the work in the rom biuld we know who these acknowledgements go to.
cupcake 1.5 google-ion 9-12-09
http://www.mediafire.com/?2ygqzmzjzoe
All files included in zip including voguimg needed to flash nothing else needed just unzip to storage card and enjoy!!!
Click to expand...
Click to collapse
is this just standard cupcake? is it themed?
standard with a blank data file
sorry if this sounds dumb, but i have been away from XDA for quite a few months now.
so you are talking about a very flashable android ROM for the vogue? meaning kiss bye bye winmo? everything works? even MMS and camera?
MMS depends on your carrier i have sprint and i can receive via picture mail(web view) but i cannot send. Everything else works YES kiss winmo goodbye i have
I followed the guide to fix my gps In windows mobile but for some reason, it still doesn't work. Would the GPS work if I flashed android instead of running it off windows mobile?
kiwilime said:
I followed the guide to fix my gps In windows mobile but for some reason, it still doesn't work. Would the GPS work if I flashed android instead of running it off windows mobile?
Click to expand...
Click to collapse
short answer, no it needs to work in win mo first. back to the drawing board. first you need to unlock your phone with an unlocker, then you need to flash an official rom preferrably from your carrier that is GPS enabled, then you can run android and use GPS on it. many tuts around. if you did all of this already, you didn't do it right. also, some programs in win mo require GPS to be primed before working. make sure to use something like google maps to test in win mo.
I'm curious. What's so great about Android on the phone?
I'm using Windows Mobile 6.1 and the phone seems to run fine.
Are there clear cut advantages or is it just "something different"?
jimt007 said:
I'm curious. What's so great about Android on the phone?
I'm using Windows Mobile 6.1 and the phone seems to run fine.
Are there clear cut advantages or is it just "something different"?
Click to expand...
Click to collapse
to me the interface is superior, the apps, but mostly it's just something cool.
functionality wise I think you can achieve the same thing on Windows mobile with the right apps. Just the cool stuff like oooooo are not there on Winmo
jimt007 said:
I'm curious. What's so great about Android on the phone?
I'm using Windows Mobile 6.1 and the phone seems to run fine.
Are there clear cut advantages or is it just "something different"?
Click to expand...
Click to collapse
Run Android from your sd card via haret. Then you can have winmo and android.
im having issues, I have the original 512mb card in the phone formatted twice with fat32 partition. Copied the 6 files from your zip file and flashed the nbh file via the windows ruu flasher all was good. Boots with the linux penguin but I get to the state where it says losetup: /dev/block/loop0: No Such file or directory Failed
Failed to mount data fs on SD Card.
/bin/sh1 can't access ttyl job control turned off.
Then it just sits there.
Help, I'm playing around with this on my partially broken vogue (have my good one running winmo) so I can fool around with it but I've tried everything I could.
Thanks
Have try it on my Kaiser... I know for sure it will not work.. and indeed... loop between reset and the HTC logo
is this different than the one dzo made?
my mistake i made the zip file really quick last night i will redo it. Apparent i didnt rename datablank.img to data.img i will fix and reupload but all you have to do is make sure the file is data.img
The link in the first post has been updated to reflect this change. My apologies.
mush2699 said:
Apparent i didnt rename datablank.img to data.img
Click to expand...
Click to collapse
If that is only the difference then we can rename it itself if you already have the files.
Question: Can you also replace the system.sqsh with a build you like?
(When you know for sure it is working.. beside if GPS/Bluetooth is working.)
And in the ROM there is: zimage, initrd and haret.exe?
the flash will not work on a Kaiser have try the new ZIP file.
I flashed this rom and it was very nice, but when i tried to sync my google account, it force closed and my contacts never synced. Is there a fix to this?
Can someone also make a Flashable rom for KAISER ... thanks..
ludester said:
im having issues, I have the original 512mb card in the phone formatted twice with fat32 partition. Copied the 6 files from your zip file and flashed the nbh file via the windows ruu flasher all was good. Boots with the linux penguin but I get to the state where it says losetup: /dev/block/loop0: No Such file or directory Failed
Failed to mount data fs on SD Card.
/bin/sh1 can't access ttyl job control turned off.
Then it just sits there.
Help, I'm playing around with this on my partially broken vogue (have my good one running winmo) so I can fool around with it but I've tried everything I could.
Thanks
Click to expand...
Click to collapse
Try scanning the card for errors. Aslo note that the data file needs to be named data.img. Between those 2 ideas you problem should be solved.
Roms
Here is a whole bunch of them
not sure which ones work perfectly, i know a couple of them work for me.
go ahead and try em out.
i take no credit for these roms
http://www.mediafire.com/?sharekey=aa29b5ef55091cf1c79b87b207592a1cda1aeb409e8c06c379b5ba589d1986ba
Even running natively instead of haret i have noticed battery life really sucks and i'm just talking about standby mode. Using the same programs on android as winmo i get about a third of the battery life. Can anyone recommend any battery saving tip. GPS is on only when needed and data is always on. I will not turn data off as it is always on in winmo and i have no issues with winmo.
Ok so I picked up my Droid X about a month ago and haven't been able to put this thing down, I never thought about rooting it because it did everything I needed/wanted it to do, then one day I log into my car forum and all the OT guys are posting cool print screen's of their phones. I was intrigued, so I rooted my phone and have been trying to figure out a few things but I'm not really up on the terminology and/or logic behind doing certain things. I would greatly appreciate any help in regards to explaining the following:
1) Rooting - Takes off restrictions on the phone so that developer apps can be installed... Is there more to this or is that pretty much it?
2) Flashing - I see this term often but I'm not sure what it is exactly, I tried installing a theme once and the directions said to flash something somewhere and looked at it the same way my dog looks at me while I'm working out at home.. lol
3) ROM - !?
4) apk's - What are they, what do they do, and how do you install them!?
5) Installing themes - I'm thinking has to do with all of the above...
6) Locating and moving downloaded content...
7) How do all of these things tie together? I'm completely clueless as to what does what on the phone and would like to become as knowledgeable as I was when the iPhone first came out and I figured out how to jailbreak/unlock it...
As a reward for your time and effort I leave you Final Fantasy VII fan's with a cool wallpaper I found at work today.. Thanks for any/all input and again, your time is most appreciated!!
Initial GT3 said:
Ok so I picked up my Droid X about a month ago and haven't been able to put this thing down, I never thought about rooting it because it did everything I needed/wanted it to do, then one day I log into my car forum and all the OT guys are posting cool print screen's of their phones. I was intrigued, so I rooted my phone and have been trying to figure out a few things but I'm not really up on the terminology and/or logic behind doing certain things. I would greatly appreciate any help in regards to explaining the following:
1) Rooting - Takes off restrictions on the phone so that developer apps can be installed... Is there more to this or is that pretty much it?
2) Flashing - I see this term often but I'm not sure what it is exactly, I tried installing a theme once and the directions said to flash something somewhere and looked at it the same way my dog looks at me while I'm working out at home.. lol
3) ROM - !?
4) apk's - What are they, what do they do, and how do you install them!?
5) Installing themes - I'm thinking has to do with all of the above...
6) Locating and moving downloaded content...
7) How do all of these things tie together? I'm completely clueless as to what does what on the phone and would like to become as knowledgeable as I was when the iPhone first came out and I figured out how to jailbreak/unlock it...
As a reward for your time and effort I leave you Final Fantasy VII fan's with a cool wallpaper I found at work today.. Thanks for any/all input and again, your time is most appreciated!!
Click to expand...
Click to collapse
First off- that is a lot to bite off as an opener. lol. I have to get in a minute- plus I am a newb as well but here a couple of things...
1) You sound pretty on track. Root gives you access to more options with your phone. It also voids your warranty.
2) Flashing. A term used loosely. Normally it is used in conjunction with "flashing a rom". It simply means to install something (basically).
3) Rom. It is the image (not in the photo-graphical sense) that is embedded/burned on your phones hard drive with all the information of your operating system. For instance: you are on the stock 2.2 ota "rom". But you could "flash" the new "AOSP rom" that was just released. That means you would be removing the factory image that came on your phone and replacing it with a modified image. Theme's and .apk's -those are not "burned" into the phone. If you do a factory reset- those will be wiped. The rom image stays put. If you flash from 2.2 ota to AOSP and then did a factory reset- you would not return to the original state your phone came from Motorola bc that image is completely removed and replaced by the new image you flash. Instead you would return to a clean AOSP.
4) .apk's - .apk is simply the name of the file extension used for android applications. I came from Windows Mobile and they were called .cabs. So any app can be referred to as an .apk. You can download an apk from XDA, place it on your sdcard, tap the file, and i think you will be prompted with "do you want to install" (some where along those lines). There is a setting in the "Settings" that allows you to install 3rd party (non-market) .apk's.
5)Installing themes. This refers to modifying the images (and this time I do mean in the graphic sense) of certain .apk's and other whatchamajiggies. You can install a simple theme that just changes your lockscreen, or you can install a huge theme that changes almost every part of every image so the entire phone looks similar. Here is the tricky part about using themes- your phone has to be deodexed.
deodexed. When you get your phone all of the system files come with a few different parts to them. One of those parts is an odexed file. Apparently the theme building types do not like working with these files so they run this process called de-odexing in which all of the system files are somehow manipulated in a way where they no longer need their odex file. So you end up "de-odexed". There is a program called "xultimate 2.2" that enables regular folk like you and me to deodex our phones. I tried running it yesterday and it errored out on me. So I used another method that worked fine. There are some threads on here about deodexing- if you want themes you will have to do it.
6) locating and moving downloaded content. When you have root you can get Root Explorer from the market. I am sure there are other good file exploreres- but I can't speak to them- I use Root Explorer. As far as locating downloaded content- whenever I download something from my phone, it always (normally) goes to /sdcard/downloads. If it is not there, I guess you just do a search for it. If you want to move it- long press the item, copy, move.
And you will need to google "ADB" (android device bridge). Many of these activities will require the use of ADB. You plug in your phone through USB (make sure phone settings are set to "USB debugging") and... well there is just way to much on this one. Google this one and you will find a lot of stuff- or search it here on XDA
have a great weekend. got to go.
- It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung)
- Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work.
Click to expand...
Click to collapse
"Force OTA"
UPDATE:: IF you cannot for whatever reason load the file to your SD Card, gmail yourself the link (below) and download it using Dolphin HD browser. I just confirmed it works on my phone, however, it does not work with the stock browser. Check the market for Dolphin HD, it's free. Client mode is set to desktop, which is under settings once in Dolphin HD. I was able to download the update.zip to the phone rather quickly over 4G Other browsers may work, I prefer that one though. Doesn't hurt to try. The stock one will not save the file, though will navigate to it.
As I first posted yesterday, there are [now 3] ways of downloading and installing the new EB13 Froyo release. If you have a Windows PC, there is a new utility that Samsung has released to flash the phone via PC. I personally couldn't get it to run on my Win 7 x64 laptop due to the enlarged font I run on my high-res laptop screen. Additionally, the 200MB file will wipe your phone completely clean. If you have a "trouble free" factory install of the current 2.1.1, the update method contained here is your best bet. Trouble free meaning that only bugs of the software are present. If you have issues above and beyond that of all other eclair users, you may want to completely wipe your phone.
The easiest and fastest method is to visit Samsung's Sprint Epic download page here http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR and click the "Software" link (Manuals is the default landing page) and download the 91.14MB File labeled as for MAC OS. You will notice the much larger windows download (200MB) which is not needed, and may not work.
After you download the zip file, copy it over to your SD Card in your phone by either hooking it up and mounting it as you would normally do to copy files to your phone, or as I did, place the Micro SD card into an adapter and insert it into your computer. Copy the .zip file you downloaded onto the SD card; do not place it into any directory.
With your phone powered off, insert the SD Card back into the phone and replace the battery cover. Now, while holding both volume up and volume down rocker buttons (yes, you can push both at the same time), hold the camera button down as well and then press and hold the power on key. You will hold all 4 buttons on the phone until it boots into the flash menu.
Use the volume down button to scroll to..
"Apply SDcard: Update.Zip"
Push the Home key on the bottom of the phone and the update will commence.
Once it's complete, the phone may reboot into the menu again, at which time you select "Reboot" and hit the home key again.
The phone may reboot a few more times after it's first boot, and it may take a few minutes to fully get up and running. If it acts strange for a few minutes, this is normal.
Performing the update this way did not destroy any of my data, texts, applications, contacts, etc. Everything was exactly the same, except for the new version of Android. You must have a stock phone or the update most likely will not work. No ROMS, etc may be installed for the update to work. Before doing the update, go through your applications and uninstall anything you don't want / use.
You may also wait for the OTA update, but it will take a while to download, use up your battery, and you have to wait longer. It has already been confirmed several times, the 2 files are EXACTLY the same (OTA and the 91.14mb file from samsung) DO NOT waste time using a link to another file, there is no point and only risk in obtaining the file from somewhere else.
Before I began, I copied things off of my SD card that I wanted and performed a format on it. If you have apps installed on the SD Card, and you choose to do this, you may need to reinstall them. Once the update was complete, I copied the directories and files back to the SD Card.
(STICKY worthy!) No other post has this info immediately at hand.
Bump. I am seeing new posts answered by this.......
i don't know
http://forum.xda-developers.com/showthread.php?t=963652
It's already been done...
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Personally, I think Whosdaman's version is much more concise. Perhaps you meant yours is more convoluted or wordy? But hey, potato, tomato, right?
NoSoMo said:
Eh, it's not as concise, and also not borrowed. This is the easy, "don't do anything but update my OS" method. NOTHING is needed except the ability to load the Update.zip to the SD Card.
Click to expand...
Click to collapse
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me
Whosdaman said:
Do you know what the word concise means? And what does borrowed mean? Cause you do know I am the one who wrote the article for BriefMobile.com
And thank you to the post above me
Click to expand...
Click to collapse
You're welcome. And I'm guessing he was referring to how you linked to Briefmobile and outside files?
NoSoMo said:
Perhaps you should read the steps and not just do a character count? Personally I wouldn't subject the information on my phone to a that of a file that someone put on a download site.
- Get update file
- Place on SD Card
- Boot phone in flash mode and begin
Odin not required
Absolutely, sure it's full of other info, but it's info that's been asked numerous times.
Click to expand...
Click to collapse
Fair enough about not wanting to DL something that you can't verify the source... On a positive note, those three steps are exceptionally concise!
Does this work on DK28 Froyo? Probably not, eh?
I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?
mynewepic10 said:
I am on all stock and have clockwork installed. I tried to do the update like you said here, but it aborts the install and says no error message. I downloaded from the link you provided. It says E:Error in /sdcard/update.zip
Firmware version-2.1-update1
Build Number-SPH-D700 ECLAIR.DI18
So is there something I am doing wrong?
Click to expand...
Click to collapse
This has been answered in one of those posts with several hundred replies (if I had the answer on-hand, I would post it). I kept the Epic stock to avoid any issues, so my update was rather simple. A few people have already had to reload their phones a couple of times before everything worked out.
nonzenze said:
Does this work on DK28 Froyo? Probably not, eh?
Click to expand...
Click to collapse
DK28 wasn't official. The latest official release is DI18 - 2.1.1. This updates STOCK 2.1.1 ONLY.
I didn't care to fool with the phone originally due to not knowing the exact release date of froyo. It has been way over due, but I honestly didn't have any reason to mod. Froyo has enhanced the phone, but honestly doesn't provide anything new that would change the way I already use the device. GPS is faster to acquire in google maps, but in GPS Test, it was always fairly instant. It's also reports more accurate, reports being key, it wasn't ever off but by 20 feet anyway, which is about all you can expect on 3D accuracy.
I used the .exe file from Samsung website to flash my phone and works like a champ.
Now some minor quirks with Froyo but will address them in different threads.
Thanks for the help!!
Dakrk
Updated the post, you can download the file directly to the phone. Send yourself the link via gmail....and read the first post of this thread.....
This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!
D623 said:
This update worked flawlessly didn't lose any of my settings or anything, Thank you so much!
Click to expand...
Click to collapse
Glad to hear it
Doesn't work on DK28
Thank you for the clear instructions
I appreciated all the details in your instructions.
I downloaded to a blank xtra SD as you did and it all went very smoothly the first time.
Data, everything is retained.
Thank YOU.
up it goes
Thank you,i got bored waiting for ota.
Sent from Maxwell's shoe.
I have an HTC HD2. I'd like to run Android so I can use the Intuit credit card processing software....
I'm looking for simple, idiot-proof, acronym-free instructions on finding and installing a current, stable, functional Android...
I'm sure the folks that hang out here all the time know what all the acronyms are, but I'm a touch baffled... I figured out "sd" means the SD card in the phone. But, "NAND", "CWM" "MAGDLR", and some of the arcane terminology is confusing, and I don't know what I NEED to know and what I can safely ignore...
So, I can guess and pick some Android installation (it appears there are dozens of notes touting competing versions) but it would be simpler if someone in here can recommend something for a computer literate user that doesn't want to be a cell phone O/S expert...
Recommendations?
instructions:http://forum.xda-developers.com/showthread.php?t=893948
nand tools:http://forum.xda-developers.com/showthread.php?t=1090783
rom(cm7):http://forum.xda-developers.com/showthread.php?t=933951
rom(miui):http://forum.xda-developers.com/showthread.php?t=1028693
rom(sense):http://forum.xda-developers.com/showthread.php?t=954369
simple flashing order:make hspl 2.08 using hspl4-task 29-flash radio 2.15.....-flash mgldr-flash proper cwr partition for selected rom-if you use eu hd2 make sd-ext partition in sd(this can be done by mgldr)-put your rom.zip in sd-in mgldr choose ad recovery-install zip from sd-choose zip from sd-after installation complete press back then reboot.ask again if you stuck
Not to sound ungrateful 'cause I'm sure there's a lot of useful information in there somewhere, but this is exactly why I'm requesting something idiot-proof...
simple flashing order:make hspl 2.08 using hspl4-task 29-flash radio 2.15.....-flash mgldr-flash proper cwr partition for selected rom-if you use eu hd2 make sd-ext partition in sd(this can be done by mgldr)-put your rom.zip in sd-in mgldr choose ad recovery-install zip from sd-choose zip from sd-after installation complete press back then reboot.ask again if you stuck
Why am I flashing anything?
What is hspl 2.09 and why would I need it?
what on EARTH does "hspl4-task 29-flash radio 2.15" even MEAN?
why do I need a "proper cwr partition"?
and what rom am I selecting?
and on and on......
OK, so I presume the above is either a test or a bit of humor at the uninformed observer's expense (that'd be me)...
So, can I have all this translated from phone geek to dumb end user now?
Again, I presume I can just put Android on the SD card without a lot of pain and anguish, so still wondering what's a good, stable, fully-functional installation that'll run the GoPayment software and let me swipe credit cards through the phone...
my question, did you read the links? i mean really really read them? not just click and say "oh ****, that's a lot of text, i need help?" trust me....read them...then read them again...then read it again. it will start to make sense. your questions--
best read for a lot of your questions (besides what was posted above):
http://forum.xda-developers.com/showthread.php?t=1021837
Why am I flashing anything?
- you said you wanted android. technically you could use an sdcard rom, but he was just trying to give you what you asked for. guess the question should be why are YOU flashing anything?
you should ask - do i want windows mobile and android, only android (get rid of windows mobile all together) or windows phone (wp7) and android. only then can we point you in the right direction.
What is hspl 2.08 and why would I need it?
- read my thread above!!!!!! cuz you can't flash android without it (this is a custom bootloader that allows your windows mobile phone to install magldr or clk which allows you to install android to nand - aka install android to your phone)
what on EARTH does "hspl4-task 29-flash radio 2.15" even MEAN?
ignore the task 29 (i have never done this).
hspl4 will install hspl2.08 to your phone. this unlocks the bootloader. layman's terms - allows you to install magldr or clk to install android (or windows phone 7)
you need a particular radio to make this all work. that radio is 2.15. a radio is what allows your phone to make calls/data/etc. don't ask why this is, this is just the way it is. the radio your phone came with is likely different.
why do I need a "proper cwr partition"?
- cuz this allows you to install android. too small a partition, android won't fit. too large a partition, wasted space. just right partition = all good. you need to READ the rom thread to know what is the right partition.
and what rom am I selecting?
- you need to READ about the flavors of roms. there are a bunch. take one and try it. if it doesn't work, find another.
Again, I presume I can just put Android on the SD card without a lot of pain and anguish,
- yes, this is true
so still wondering what's a good, stable, fully-functional installation that'll run the GoPayment software and let me swipe credit cards through the phone
- beats me. but why not just try something? sdcard roms cannot in anyway hurt your phone.
now go read. and read. and read. and then experiment. good luck.
here is the best idiot proof way to get android on your phone. it is a winmo rom that has android already built in so you wont have to figure out what is what. its so easy even a cave man can do it.
Well, as usual, the secret to getting the right answer is asking the right question. And the trick to asking the right question is knowing most of the answer....
I didn't........
What I'd LIKE to do is have some current, fully functional version of Android available so I can process credit cards through my HD2 using a swiper. Over time, I may attempt to migrate other things to Android - like contacts and such. But initially, I'm just concerned about the CC processing.
So, as I understand what I want to do, putting Android on the SD card will work, and I just need to figure out which one of the umpteen versions is a good one. I'd like a home page that looks at least somewhat like my current Windows page. I"d like the buttons to continue to work as they currently do (as much as possible)....
I went out and started looking at the various SD Android versions here and selected the nexushd2-gingerbread v2.8 one because of a reply in a previous note asking for a "good" Android......
Installed it, and it works fine, although I"m not particularly fond of the home page. Put the GoPayment application on, plugged in the swiper, and ran a charge.... Appears to work fine, so it solves my primary problem...
Now, since I've figured out I'd prefer to use an SD installation, and have one that works, is there a "better" one that I should try? One that looks and feels more like the Windows Mobile 6.5 I'm used to? Or, is there one that has a different look and feel, but some functionality that makes it superior to the others?
This ROM I'm about to recommend dates back to last November...
However, I have tried every SD ROM since that time, used them for either a few hours/days/weeks, and still always returned to this one. It is just flawless, albeit Android 2.2.
Just download it, throw the 'Android' folder into the SD Card, and run the two files (CLRCAD.exe which appears to do nothing, but does enable the sound, and then Haret.exe)
http://forum.xda-developers.com/showthread.php?t=847631&highlight=black+blue
If you decide to move off WinMob, then NANDs are good, but personally I just have a WinMob program which runs on boot and then executes those two files)
Enjoy!
dkperez said:
Now, since I've figured out I'd prefer to use an SD installation, and have one that works, is there a "better" one that I should try? One that looks and feels more like the Windows Mobile 6.5 I'm used to? Or, is there one that has a different look and feel, but some functionality that makes it superior to the others?
Click to expand...
Click to collapse
do you like sense base builds or would you prefer 1 that doesn't have sense like cm7 or a miui ROM?
AmeriCanAndroid seems to be a favorite for a lot of people and is updated rather often but i personally like RafDroid HD found here. if you want to take a look at other android builds for the htc hd2 found here on xda check out this webpage. it will also give you some info about each ROM like the base, build, when it was updated & if it has sense or not. when you find one you want just click it & it will link you back to the page found on XDA.
Am I correct that "Sense" is the user interface used on the Windows Mobile HD2? If so, yes, I like it, but probably because I"m used to it. I'd have to try some different versions with different UIs to see what's most comfortable.
I'm currently running the nexushd2-gingerbread v2.8 one I downloaded yesterday. The UI is enough different that it's taking a little getting used to.
I'll have to give the others you mentioned a try, and go look at the web page that shows the different builds. I"m amazed at how many there are.
Just for fun I downloaded the AmeriCanAndroid 08/1/11 version and put it on the SD card..... Tried to run clrcad.exe and got the "CLRCAD annot be opened" error. Tried haret and got the same error. Both say "Either it is not signed with a trusted certificate, or one of its components cannot be found..."
So, am I missing something simple or is there a problem with this build? I found a couple topics in here about problems with clrcad but they seemed to wander aimlessly without any resolution...
I've now looked through a couple DOZEN topics over the last year with complaints of exactly the problem I'm seeing with clrcad and haret... I don't see a resolution in ANY of them......
Yesterday, copied the files onto the phone for the nexus gingerbread Android, ran clrcad and haret and was up and running.......
Now, I've tried three different builds, including reinstalling the nexus one, and NONE of them will run. I get the same error for clrcad and haret every time.
Shutting down the phone didn't do anything.
I figure there's got to be a simple, obvious answer sitting here but I'm not finding it.
sense for windows mobile & sense for android are two different things. i personally dont know of any android rom or app thats availible in the market that will give you a windows mobile look or feel. i would find a rom that you want and then try & find a video on youtube that matches it so you can see what its like before you go through all the steps to flash it.
did you unzip AmeriCanAndroid or did you leave it in a zip file? i have since moved to nand builds so im going from memory which is starting to fail me in my old age but i think it needs to be unzipped using something like 7-zip. i think you just put the android folder on the root of your sd card. there is a video in the thread that shows you how to do the install. you can find that here.
so you tried to re-install something that worked for you yesterday but now you cant install it again? how long did you wait because with some builds it can take as long as 10-15 mins to install everything correctly. could you give me the steps you took step by step to try to install AmeriCanAndroid? i think thats the only way i would be able to help.
Yesterday I downloaded the Android 7z file. Unzipped it on the PC and let it create an android folder with all the files. Plugged in the phone and copied the android folder to the root of the SD card on the phone. Ran clrcad and haret on the phone and IT WORKED PERFECTLY.........
Today, just to try one of the builds recommended in here I downloaded a different android. did EXACTLY the same thing - unzipped with a 7z unzip, copied it to an android folder in the root of the phone, ran clrcad and got the error. Ran haret and got the same error........
Cleaned off the android folder on the phone, rebooted, tried a soft reset, etc.
Copied the nexus android build from the PC to the phone - EXACTLY AS I DID YESTERDAY WHEN IT WORKED. Ran clrcad and got the error......
I don't know what's going on with the phone or the Android builds or what, but there are a LOT of entries here and elsewhere on the web about people having exactly this problem. And so far I haven't seen the answer that makes this problem go away......
My recollection is that I had EXACTLY the same problem about 6 months ago. Installed an earlier version of Android and after the first time I rebooted the phone I could never get Android to run again. Just got the same clrcad and haret errors...
So, SOMEBODY, what's causing this and how do I get rid of it WITHOUT having to do some hard reset the destroys everything on the phone?
Back up any data on you sd card you need (I.e. pics, vids, music, whatever you feel important.) Download the Panasonic sd formatter and format your sd card. Copy over the android folder that is in the 7zip that you have unzipped. You should be able to boot ok from there.
Sent from my AmeriCan NANDroid HD2 r727 magldr
Formatted from the PC.
Installed the formatter on the PC. Formatted the SD card. MAKES NO DIFFERENCE. Copied the Android folder (the identical folder I copied yesterday) to the SD card, and STILL get exactly the same error from clrcad.....
Is this something that happens a lot? 'Cause so far, the two times I've had Android on this phone this has happened. And there are a LOT of topics out there with exactly this problem, and a lot of unsuccessful "do this" that don't appear to work. Does ANYBODY had a real fix for this? It worked perfectly 24 hours ago, now it doesn't. My BIG concern is that if Android is flaky and unreliable on the SD card I can't use this thing to do credit card processing if it's going to randomly fail and not be bootable.
dkperez said:
Yesterday I downloaded the Android 7z file. Unzipped it on the PC and let it create an android folder with all the files. Plugged in the phone and copied the android folder to the root of the SD card on the phone. Ran clrcad and haret on the phone and IT WORKED PERFECTLY.........
Today, just to try one of the builds recommended in here I downloaded a different android. did EXACTLY the same thing - unzipped with a 7z unzip, copied it to an android folder in the root of the phone, ran clrcad and got the error. Ran haret and got the same error........
Cleaned off the android folder on the phone, rebooted, tried a soft reset, etc.
So, SOMEBODY, what's causing this and how do I get rid of it WITHOUT having to do some hard reset the destroys everything on the phone?
Click to expand...
Click to collapse
your suppose to copy the unzipped android folder to the root of your sd card and not your phone. i think thats why your getting an error.
example: download rom and unzip using 7-zip. take the "Android" folder not AmeriCanAndroid from within that file and drag_drop or copy_paste to the root of your sd card. then using a file manager from within winmo go to the android folder & run clrcad and then haret. it should run fine. you can also use a program called Rundroid that automats some of the work. its a great app that will allow you to dual boot android but i think you might find it useful as well, you can find it here. RunDroid will allow you to run several android builds from your sd, not just 1.
fwiw, I can't (won't) say anything bad about any custom ROM offered on this board. My own favorite (to use) is a personal choice, which doesn't make it superior to any other - though it may be. It's just what I'm used to, what works for me and what I'm satisfied with.
Doesn't matter if you use a stock HD2 WinMo setup, or a custom WinMo ROM on your HD2. An Android SD build won't interfere with it. And so... (personally) I use AmericanAndroid (ACA). It IS used by a majority of folks for good reason. - BUT - I'm trying my best to be careful and clear with YOU that it may not be the best solution for you or anyone else in particular. We don't play favorites on this site for good reason! For me though... it is an extremely easy ROM to implement.
So you're having a bit of trouble with clrcad & haret... No Problemo.
Google is your friend... find and install under WinMo the 'exceller bootloader'. You'll boot WinMo... and then run Exceller. It will shut down WinMo and run clrcad & haret.
Make sure you've properly installed ACA on your SD card first. No need to partition your SD card. Make sure you're clear with the instructions on the first page and be sure to edit the startup.txt file (before installation) to change the LCD pixel density from 167 (default) to 240... unless you have eagle eyes or like tiny icons & text.
This is your simplest solution, and... get to know it a bit before you swap it for something that might (possibly) not be better. There's a reason a majority of users have chosen to use this Android build.
I'd wish you good luck, but luck has nothing to do with these things. Have fun with it! -Rob
Yes, EVERYTHING was copied to the Android folder OF THE SD CARD......
I have no problem installing yet another piece of software to (hopefully) get the necessary clrcad and haret files to run, but THIS WORKED TWO DAYS AGO. Without a bootloader or anything else. It worked.....
And yes, Google is quite effective. It showed me dozens of topics in forums where people complained of EXACTLY the problem I'm having. What it DIDN'T show me was a fix that didn't involve reformatting the SD card, REPLACING the SD card, doing a hard reset on the phone, and (this one I haven't seen before) installing a boot loader to hopefully get around the issue... BTW: all the above with the exception of the boot loader were tried by people with no success.
FWIW: I"m not criticizing any of the Android builds in here. I'm sure they're largely excellent, with slightly different flavors. And they represent a huge amount of work, of which I'm cognizant and appreciative.
I presume the problem is with Windows Mobile, NOT the Android builds, but it would be comforting to have somebody provide a solution to why it works when installed, and doesn't work after a reboot. Did all those other people that had the same problem do what I did six months ago and just give up on Android as being more work than it was worth? This isn't an isolated problem, there are dozens (and probably hundreds) of instances of people not being able to get Android to boot.
Anyhow, I"ll go find an exceller bootloader and try that. Hopefully, the thing is controllable so if things still fail I can get back to Windows...
I spoke too soon....... It's early here (having started this again at 04:00), and maybe my brain just isn't working yet, or it could VERY possibly be that I'm just too stupid to be allowed to mess with this whole thing, but I eventually found a copy of EBL2.1a._PlusUbuntu.CAB and downloaded it to the PC.
Then I went and found instructions on installing a cab file on the HD2. According to them I just COPY the cab file from the folder on the pc to My Documents on the SD card of the phone, then disconnect the phone from the PC, navigate to the folder, and click on the cab file.......
OK, sounds simple enough....... Did so.
Got a popup on the phone that said it was "Installing ..." At the bottom I got "The program is from an unknown publisher... Do you want to continue?"
So, I clicked YES...... Again, fairly idiot-proof........
And got "Installation of EBL2.1a._PlusUbuntu.CAB was unsuccessful."
Nothing else.... Just the message on a blank screen...
I"ll leave out the amount of screaming and swearing I"m doing at this point.....
Just trying to work my way through GMPOWER's tutorial on rooting the Nook Color.
I have some REALLY basic questions that are probably covered in the instructions, but if it's NEW, which it is for anyone reading here...it's confusing:
For example,
1. What is meant by the bold, red warning........"You must do a complete wipe before installing this package." Does "wipe" mean FORMAT? If yes......format what? The NOOK? The SD card? Both?
2. In the video included in the tutorial, there's reference to an unZIPing program being required to 'uncork' the downloaded files. The narrator says to right click and unzip the files. (When I right click on my zipped files, the only command I see that MIGHT an unzip function is "Extract all". Is that an unzip program?)
3. The most 'complicated' process of all, (to me, anyway) the selecting of the files and unzipping them and "flashing" them (is that just another word for copying or installing?) is passed over so quickly and with the camera so far away from the screen in the video....it's very difficult to see and understand exactly what is happening. For example, at exactly 4:06 into the video, the narrator says to right click on the CWM file.....at which point, it looks like he actually LEFT clicks it and it opens to show TWO files.....and he then RIGHT clicks on one of them, but doesn't say what it's name is or what it should do.
Sorry to sound like a whiney noob......but, remember, only noobs are watching this; otherwise we wouldn't be watching it!
Can someone please elaborate on the click here.....now do this......then do that.......then you will see this......and now you have to do these? I'm sure I speak for more people than just myself when I ask this.
Thanks very much for any help.
Michael
Bultaco69 said:
Just trying to work my way through GMPOWER's tutorial on rooting the Nook Color.
I have some REALLY basic questions that are probably covered in the instructions, but if it's NEW, which it is for anyone reading here...it's confusing:
For example,
1. What is meant by the bold, red warning........"You must do a complete wipe before installing this package." Does "wipe" mean FORMAT? If yes......format what? The NOOK? The SD card? Both?
2. In the video included in the tutorial, there's reference to an unZIPing program being required to 'uncork' the downloaded files. The narrator says to right click and unzip the files. (When I right click on my zipped files, the only command I see that MIGHT an unzip function is "Extract all". Is that an unzip program?)
3. The most 'complicated' process of all, (to me, anyway) the selecting of the files and unzipping them and "flashing" them (is that just another word for copying or installing?) is passed over so quickly and with the camera so far away from the screen in the video....it's very difficult to see and understand exactly what is happening. For example, at exactly 4:06 into the video, the narrator says to right click on the CWM file.....at which point, it looks like he actually LEFT clicks it and it opens to show TWO files.....and he then RIGHT clicks on one of them, but doesn't say what it's name is or what it should do.
Sorry to sound like a whiney noob......but, remember, only noobs are watching this; otherwise we wouldn't be watching it!
Can someone please elaborate on the click here.....now do this......then do that.......then you will see this......and now you have to do these? I'm sure I speak for more people than just myself when I ask this.
Thanks very much for any help.
Michael
Click to expand...
Click to collapse
I'm running CM10 and have not seen the video you speak of... But I think I can help with some of what you're looking for.
1. Wipe and format are often used synonymously. For example wiping your system or data partition on your device is the same as formatting. If the video is talking about the SD card, the same philosophy applies. A formatted card is ideal before starting.
2. Again, unzip and extract are somewhat synonymous. What program they are likely referring to is 7zip. It's a powerful compression and decompression utility.
3. Flashing describes the process of installing a package(ROM, zip, etc...) from one media(SD in this case) and installing it to a normally read only media (the Nook's internal drive. Including the system and data partitions of the disk) This is usually done through a recovery program that starts up instead of the normal OS. In most cases it is Clockwork Mod recovery (CWM) or something very much like it.
Like I said, I haven't seem the video and never went the manual nooter route. I totally wiped stock nook and went the CyanogenMod route. So I can't comment on the video's vagueness in this case. Maybe another member has some insight on this.
Sent from my SPH-D700 using xda premium
Error while using Win32DiskImager
propjockey said:
I'm running CM10 and have not seen the video you speak of... But I think I can help with some of what you're looking for.
1. Wipe and format are often used synonymously. For example wiping your system or data partition on your device is the same as formatting. If the video is talking about the SD card, the same philosophy applies. A formatted card is ideal before starting.
2. Again, unzip and extract are somewhat synonymous. What program they are likely referring to is 7zip. It's a powerful compression and decompression utility.
3. Flashing describes the process of installing a package(ROM, zip, etc...) from one media(SD in this case) and installing it to a normally read only media (the Nook's internal drive. Including the system and data partitions of the disk) This is usually done through a recovery program that starts up instead of the normal OS. In most cases it is Clockwork Mod recovery (CWM) or something very much like it.
Like I said, I haven't seem the video and never went the manual nooter route. I totally wiped stock nook and went the CyanogenMod route. So I can't comment on the video's vagueness in this case. Maybe another member has some insight on this.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Hey, propjockey.....thanks for the 'patient' explanations.
I've made a little headway in terms of preparing to root my Nook Color.....but when I tried to use DiskImager....I got an error:....."An error occurred when attempting to lock the volume.
Error 5: Access is denied."
Anybody know what might have generated this? Or, what I should try next?
Thanks for any help, ladies and gentlemen!
Later,
Michael
Bultaco69 said:
Hey, propjockey.....thanks for the 'patient' explanations.
I've made a little headway in terms of preparing to root my Nook Color.....but when I tried to use DiskImager....I got an error:....."An error occurred when attempting to lock the volume.
Error 5: Access is denied."
Anybody know what might have generated this? Or, what I should try next?
Thanks for any help, ladies and gentlemen!
Later,
Michael
Click to expand...
Click to collapse
Yes, that means you have windows explorer looking at the drive. That locks it so it cannot be written to. Close windows explorer and try again.
Sent from my HD+ running CM10 on SD with XDA Premium
Still getting lock error
leapinlar said:
Yes, that means you have windows explorer looking at the drive. That locks it so it cannot be written to. Close windows explorer and try again.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
Thanks very much for the suggestion, leapinlar,.....but I'm still getting the Lock error even after making sure ALL windows of Explorer are closed (especially any for the SD drive).
Dumb question: I don't think either the text from GMPOWER or the video ever state WHERE the win32 diskimager and/or the clockwork-3.2.0.1 should be residing when these operations are taking place. I would ASSUME they're all supposed to be on the SD card....but I've been wrong before when assuming!!
Also, when I first tried this, I noticed I had downloaded (and possibly extracted) the win32diskimager-source.zip (SOURCE) version as opposed to the BINARY version. Should I start over? With a cleanly formatted SD? (my formatting took a long, long time when I initially did it.......not using the Quick method, as I think I saw advised somewhere.)
Thoughts? Thanks!
EDIT: Actually, I think I just answered PART of my question: when I tried it again (after formatting the SD and putting ALL three zipped files on the card) I got a new/different error:
"Image file cannot be located on the requested device." So, I guess that means that at least the "eyeballer" image file CANNOT be sitting on the SD card while you attempt to "write" it there. Yes? No?
Therefore....by the same token....is it safe/possible to run the Win32DiskImager from the SD card.....or should it ALSO be located somewhere else during this process??
ANOTHER EDIT: Tried removing the image file from the SD card, then running DiskImage and selecting the image file that I'd downloaded and unzipped to my hard drive. STILL got the "lock error". Getting frustrated. Most grateful for any suggestions/help. Please and Thanks
You definitely need the img file on your PC before you try to burn. Having it on SD and putting that location in the image box will definitely lock the card. Try again with nothing on the card and no other program running.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
OK, leapinlar...you're my new GURU!!
leapinlar said:
You definitely need the img file on your PC before you try to burn. Having it on SD and putting that location in the image box will definitely lock the card. Try again with nothing on the card and no other program running.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
Thanks, buddy!
That was apparently my problem
I formatted the card back to being a virgin.....put NOTHING on it. Went to Win32 on my hard drive, launched it, found the eyeballer image on my HARD DRIVE and selected it to flash onto my card in the G-drive.
And away it went!!! Lovely! Just friggin lovely!!
Now, since instructions everywhere often seem to be devoid of these fine "details".......could you be so kind as to give me EXPLICIT directions on what to do next? (I'd hate to turn my Nook Color into a paperweight at this stage!)
The sequence of events (i.e. when the nook gets turned on/turned off/hooked up/ etc seem to be different in different places........I notice even the video from Acsyndicate TV, they insert a little apology in the corner saying they forgot to turn it on; DOH!! Also, I see elsewhere that the Nook should be connected by USB at some point during this process....and yet the guy in the video doesn't have a cable showing anywhere any time. WTF??)
Thanks tons for your help leapinlar.......I'm almost at the point of not buggin you any more!
Bultaco69 said:
Thanks, buddy!
That was apparently my problem
I formatted the card back to being a virgin.....put NOTHING on it. Went to Win32 on my hard drive, launched it, found the eyeballer image on my HARD DRIVE and selected it to flash onto my card in the G-drive.
And away it went!!! Lovely! Just friggin lovely!!
Now, since instructions everywhere often seem to be devoid of these fine "details".......could you be so kind as to give me EXPLICIT directions on what to do next? (I'd hate to turn my Nook Color into a paperweight at this stage!)
The sequence of events (i.e. when the nook gets turned on/turned off/hooked up/ etc seem to be different in different places........I notice even the video from Acsyndicate TV, they insert a little apology in the corner saying they forgot to turn it on; DOH!! Also, I see elsewhere that the Nook should be connected by USB at some point during this process....and yet the guy in the video doesn't have a cable showing anywhere any time. WTF??)
Thanks tons for your help leapinlar.......I'm almost at the point of not buggin you any more!
Click to expand...
Click to collapse
Just go back to Manual Nooter and follow his directions.
Sent from my BNTV600 using xda premium
"Sorry, there's not enough space to install this item."
leapinlar said:
Just go back to Manual Nooter and follow his directions.
Sent from my BNTV600 using xda premium
Click to expand...
Click to collapse
Installation/rooting successfully completed, but now unable to download any apps because of "Sorry there's not enough space......." error appearing for every attempted download.
Is there a secret.......let me rephrase that.......what IS the secret to deleting all the crap that must be in there taking up all the space?
I rooted a virtually STOCK Nook Color (1.4.3) using manualnooter-5.08.20.basic.block_updates.zip - and it appeared to be fine, but I'm assuming there's a routine that must be followed to either "turn on" the ability to download......or free up some space to download......new apps.....which, after all, is the only reason we root these things.......right?
Thanks for any/all info.
Michael
Bultaco69 said:
Installation/rooting successfully completed, but now unable to download any apps because of "Sorry there's not enough space......." error appearing for every attempted download.
Is there a secret.......let me rephrase that.......what IS the secret to deleting all the crap that must be in there taking up all the space?
I rooted a virtually STOCK Nook Color (1.4.3) using manualnooter-5.08.20.basic.block_updates.zip - and it appeared to be fine, but I'm assuming there's a routine that must be followed to either "turn on" the ability to download......or free up some space to download......new apps.....which, after all, is the only reason we root these things.......right?
Thanks for any/all info.
Michael
Click to expand...
Click to collapse
Go to settings/storage and see what it says about internal storage space. Tell us how much is left.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
leapinlar said:
Go to settings/storage and see what it says about internal storage space. Tell us how much is left.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
B&N Content Storage Available 66%
3.35GB free of 5.09GB
Other Storage Available 20%
197MB free of 1.00GB
Bultaco69 said:
B&N Content Storage Available 66%
3.35GB free of 5.09GB
Other Storage Available 20%
197MB free of 1.00GB
Click to expand...
Click to collapse
You apparently have a lot of B&N stuff (apps, games, etc) installed (1.7 GB worth), but 3.35 GB should be plenty for installing more apps through Play Store. I don't know what your issue is.
Edit: You do not say, but I am assuming you meant downloading apps with Play Store. If you meant downloading some other way, like a browser, you need an sdcard to do that and you have not said how much room your SD card has.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
leapinlar said:
You apparently have a lot of B&N stuff (apps, games, etc) installed (1.7 GB worth), but 3.35 GB should be plenty for installing more apps through Play Store. I don't know what your issue is.
Edit: You do not say, but I am assuming you meant downloading apps with Play Store. If you meant downloading some other way, like a browser, you need an sdcard to do that and you have not said how much room your SD card has.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
OK....good feedback....THANKS!
1. Yes, I mean to download using Play Store (which currently is labeled MARKET. Presumably it'll update itself and change its name to GOOGLE PLAY when we get the storage problem solved.......will it?
2. I have next to no previous apps or media (maybe 4 apps and 4 books and 3 magazines) downloaded to the NC......but, perhaps it doesn't take much to fill this puppy?
3. I don't even have an SD card in it at this point. I removed the one I used to do the rooting because it booted to it when I started up the Nook this AM........and I assumed that was a bad thing.....or, at least unnecessary.
Should I erase the "rooting SD card"........or "keep it in a safe place" and use a new one for downloading/storing apps and media?
Thanks,
Mike
Bultaco69 said:
OK....good feedback....THANKS!
1. Yes, I mean to download using Play Store (which currently is labeled MARKET. Presumably it'll update itself and change its name to GOOGLE PLAY when we get the storage problem solved.......will it?
2. I have next to no previous apps or media (maybe 4 apps and 4 books and 3 magazines) downloaded to the NC......but, perhaps it doesn't take much to fill this puppy?
3. I don't even have an SD card in it at this point. I removed the one I used to do the rooting because it booted to it when I started up the Nook this AM........and I assumed that was a bad thing.....or, at least unnecessary.
Should I erase the "rooting SD card"........or "keep it in a safe place" and use a new one for downloading/storing apps and media?
Thanks,
Mike
Click to expand...
Click to collapse
1. It should have changed itself immediately. That may be indicative of the problem.
2. Are any of the books kids interactive books? They take a lot of space.
3. If you did not make a backup with the CWM card, and you don't plan to restore the backup in the future, then reformat the card to use as a normal SD. But I recommend you do the backup and keep the card as CWM. Then get a new one.
Sent from my Galaxy Tab running Tapatalk
leapinlar said:
1. It should have changed itself immediately. That may be indicative of the problem.
2. Are any of the books kids interactive books? They take a lot of space.
3. If you did not make a backup with the CWM card, and you don't plan to restore the backup in the future, then reformat the card to use as a normal SD. But I recommend you do the backup and keep the card as CWM. Then get a new one.
Sent from my Galaxy Tab running Tapatalk
Click to expand...
Click to collapse
1. Hmmmm. Hope THAT'S not a disaster. "Market" opens Ok and I can see hundreds (maybe thousands) of apps. But, I've used the search utility and searched for "Google Play".........."Google"..........and even "Market"........and no Google Play comes up in the search results. Shouldn't it?
2. No kids in the familly; no 'interactive' stuff of any kind that I know of....a couple of novels, couple of magazines.....sodoku, Evernote, YouTube, calculator, a little drum machine, flashlight.......mirror......holy crap, looks like wifey's been active after all!!
3. I DIDN'T make a backup with (of ?) the CWM card. Back up of what, exactly......the old disk image (operating system? Pardon my noobiness). Is it too late to make any required copies/backup? I just now copied the contents of the "rooting SD card" into a folder on my laptop's hard drive.......but I'm not sure if that's what you're talking about.
m
Bultaco69 said:
1. Hmmmm. Hope THAT'S not a disaster. "Market" opens Ok and I can see hundreds (maybe thousands) of apps. But, I've used the search utility and searched for "Google Play".........."Google"..........and even "Market"........and no Google Play comes up in the search results. Shouldn't it?
2. No kids in the familly; no 'interactive' stuff of any kind that I know of....a couple of novels, couple of magazines.....sodoku, Evernote, YouTube, calculator, a little drum machine, flashlight.......mirror......holy crap, looks like wifey's been active after all!!
3. I DIDN'T make a backup with (of ?) the CWM card. Back up of what, exactly......the old disk image (operating system? Pardon my noobiness). Is it too late to make any required copies/backup? I just now copied the contents of the "rooting SD card" into a folder on my laptop's hard drive.......but I'm not sure if that's what you're talking about.
m
Click to expand...
Click to collapse
1. That may be the problem. It should update itself, but is not critical. The older versions of market temporarily stored their downloads on a separate partition named cache. That may be full from earlier downloads. Boot to CWM and there is an option to wipe cache. Do that. Then try to use market again.
3. The CWM card is capable of making what is called a nandroid backup. It backs up your entire operating system to SD so that if in making future mods, you make a mistake, you can restore your operating system to the way it was before you started making mods. It is too late to do that for you, but you can still backup what you have now.
Sent from my Galaxy Tab running Tapatalk
leapinlar said:
1. That may be the problem. It should update itself, but is not critical. The older versions of market temporarily stored their downloads on a separate partition named cache. That may be full from earlier downloads. Boot to CWM and there is an option to wipe cache. Do that. Then try to use market again.
3. The CWM card is capable of making what is called a nandroid backup. It backs up your entire operating system to SD so that if in making future mods, you make a mistake, you can restore your operating system to the way it was before you started making mods. It is too late to do that for you, but you can still backup what you have now.
Sent from my Galaxy Tab running Tapatalk
Click to expand...
Click to collapse
I'll give that a try......booting with CWM and wiping the cache. (Out of town on family 'duties' and left the nook at home but will report back on Monday sometime.)
Thanks for "babysitting" me, buddy! Appreciate it. Have a great weekend. Later, Mike.