So I decided to update my ROM.
http://www.htc.com/sea/SupportDownload.aspx?p_id=250&cat=2&dl_id=627
Have been using SPB Backup since day 1 I got my phone and have successfully used it few times to restore my data when some software corrupted another part of the phone. Finally I found out today from HTC's website after trying my phone's serial number several times under different countries that my ROM's will be from Singapore.
Got the ROM above (107.2) and saw few hotfixes as well. I already download the +SMS fix because a kind soul uploaded the cab file on xda.
So eager to have my TP2 show 288MB of RAM and the Yahoo stock update, I went to the download page. There I saw that I could also download Sprite backup tool recommended by HTC which was free for HTC Singapore users. Downloaded and Installed, did a backup and thought, great after my ROM upgrade is done, will restore the backup which will restore everything (themes, registry, menus, software etc).
Well WRONG. After the ROM update, ran Sprite back up. Gave me few options. Restore personal data, level 1, level 2 and level 3. Well I needed Level 3 to restore everything including registry since I had so much crap installed on my phone like TomTom and so many other software. Sprite back up failed miserably with a miserable error. "Cannot restore, error".
I was like 'oh shyte'. Lucky for me I take SPB Backup's before I install a software that I think might conflict or might give me problems afterwards. I had a 3rd august backup on my storage card and my laptop. Tried restoring that and VOILA, everything restored fine. Tomtom runs fine, all the software is still there, no registry errors so far, themes, menu layout etc.
Oh and after the restore I did check my ROM version again, it had changed back from 107.2 to 107.1 (the label has changed but the actual ROM is 107.2) but the hardware is still showing 288MB
So if you are keen to upgrade but think you are going to have to re-install everything from scratch after a ROM upgrade. SPB Backup is the answer. Best $$$ spent in my life.
ps - I don't think so if I will be this lucky when HTC provides free upgrade to Win Mobile 6.5 and try and restore a Win Mobile 6.1 backup on top of that. So word of caution.
Edit - I only tried Level 3 restore which apparently according to another user posted down the bottom reckons is the last resort option. Trying Level 1 would have restored fine which I never did try. So Sprite backup most prob works fine like SPB Backup.
powersquad said:
....Oh and after the restore I did check my ROM version again, it had changed back from 107.2 to 107.1 (the label has changed but the actual ROM is 107.2) but the hardware is still showing 288MB
Click to expand...
Click to collapse
Yup same here, I have updated my Europe ROM and after the sbp restore, it change back from 401.1 to 401.0. Still give me the 288MB.
btw, there is a registry entry that stored the ROM version which was overwrriten by SPB restore, you can be change back... at
HKLM/Software/OEM/ROMVersion to the correct version.
Should actually be:
SASHIMI\Manual setup +100,000, Setup using Backup Program -100,000 after ROM upgrade.
I'm not a fan of restoring all data after upgrading\flashing a ROM, as probably a lot on XDA don't. Other than that it's pretty subjective. I for one like Sprite Backup more than I do other (shareware) backup programs.
I use PIM Backup to create a backup every night at 04:00am.
Once a week Sprite Backup creates a complete backup at 01:00am. This way it's finished before PIM Backup starts again.
This is my personal setup, and it hasn't let me down for years now
I also flashed the rom update and restored my backup with sprite backup.
Worked like a charm because I used Merge level 1.
The help say,
Use level 1
In case of problem use level 2
Still problems use level 3
So I don't understand why you used level 3 and complane all the same.
deaad said:
I also flashed the rom update and restored my backup with sprite backup.
Worked like a charm because I used Merge level 1.
The help say,
Use level 1
In case of problem use level 2
Still problems use level 3
So I don't understand why you used level 3 and complane all the same.
Click to expand...
Click to collapse
I never tried Level 1 and Level 2. I thought Level 3 would have done the job. hmmm my bad.
Time to update the thread .
Related
Hi Everyone,
Which Backup program do you use? Is there one you recommend? All this hacking my Cingular 8525 around has had me hard-reset at least twice within the last week. I need a good and reliable backup program since installing all of my software is taking me over 2.5 hours of time.
Thanks for responding.
ADP
spb backup has never let me down.well worth trying.
sprite also gets good reviews but I've never used it.
read http://www.pocketpcmag.com/blogs/index.php?blog=3&p=1270&more=1&c=1&tb=1&pb=1
I've tried different backup programs with my TyTN.
I found that the only perfect working program is SPB Backup.
I've already restored my data after hard reset with this program (not once) and all is good.
i use spb also, works great
I vote for spb as well.
Although keep in mind that it only does back up system settings and core software installed in device (not sure what exactly), not the whole file system of your PDA. My problem was, I deleted some files and uninstalled some programs after backing up, and after restore they were not there! (just blank icons).
I would love to mirror my whole device on PC hard drive, yet I am not sure about software for this purpose.
how well does spb backup perform when you do a ROM upgrade?
MilanoRex said:
how well does spb backup perform when you do a ROM upgrade?
Click to expand...
Click to collapse
Whatever backup product you use, DON'T EVEN THINK ABOUT applying a backup from a different ROM version. You're asking for serious trouble.
Simply put, if you update your ROM, you're also plan on reinstalling everything clean from scratch...
mnez said:
I vote for spb as well.
Although keep in mind that it only does back up system settings and core software installed in device (not sure what exactly), not the whole file system of your PDA. My problem was, I deleted some files and uninstalled some programs after backing up, and after restore they were not there! (just blank icons).
I would love to mirror my whole device on PC hard drive, yet I am not sure about software for this purpose.
Click to expand...
Click to collapse
Mobile Deployment
Deploy an identical policy based corporate image to all your mobile devices. From the original creators of the industry leading Symantec GhostTM cloning solution, Sprite Clone provides rapid and reliable deployment to multiple mobile devices thereby assuring consistency and cost effectiveness...
http://www.spritesoftware.com/sprite-clone
goestoeleven said:
Whatever backup product you use, DON'T EVEN THINK ABOUT applying a backup from a different ROM version. You're asking for serious trouble.
Simply put, if you update your ROM, you're also plan on reinstalling everything clean from scratch...
Click to expand...
Click to collapse
Sprite Backup works perfectly with ROM and DEVICE upgrades.. I switched from my Wizard to my Hermes without any problems..
MilanoRex said:
how well does spb backup perform when you do a ROM upgrade?
Click to expand...
Click to collapse
Use Sprite Backup in this case, it'll work unless you try to cross-restore between AKU2.x and AKU3.x. And please DO read my above-linked article; in there, I've also elaborated on this very question.
bobstarina said:
I found that the only perfect working program is SPB Backup.
Click to expand...
Click to collapse
Strange you had problems with the otehr alternates (Sunnysoft Backup, SKTools 3.0, Sprite 5.1). Are you sure you tried the LATEST versions of them? It's only lately that, for example, Sunnysoft Backup received REAL WM5 support.
Also please read the Backup Bible I've linked in above if you need more info on all these questions.
MilanoRex said:
Sprite Backup works perfectly with ROM and DEVICE upgrades.. I switched from my Wizard to my Hermes without any problems..
Click to expand...
Click to collapse
Both of you are correct. Sprite DOES work great in most cases, except for restoring AKU3 content under AKU2 and vice versa.
does restoreing after a ROM upgrade using Sprite also keep your current registry changes as well...or do i have to do all registry hacks all over again...or even after just a hard reset not a ROM upgrade do i still have to enter the reg. edits all over again....
Sprite works well for me
strikeIII said:
does restoreing after a ROM upgrade using Sprite also keep your current registry changes as well...or do i have to do all registry hacks all over again...or even after just a hard reset not a ROM upgrade do i still have to enter the reg. edits all over again....
Click to expand...
Click to collapse
It will restore your registry changes too. Otehrwise, it wouldn't work at all with a lot of third-party apps that also use the Registry to store their stuff / settings.
Does anyone know if Spb backup will back up outlook notes?
Sprite is the only one worth getting since you can restore after a ROM or device change Just make sure you RTFM before you go changing anything as there are things you need to do before hand
Interesting to hear that Sprite Backup works without problems for all of you. On my TyTN, when it wants to reboot before beginning a backup, the TyTN gets stuck at the Windows Mobile screen. Removing/re-inserting the battery usually allows the boot process to finish - but only until the next reboot. After that, all subsequent reboots show that behaviour, no matter if initiated by Sprite Backup or otherwise. And very strangley, after a day or two this phenomenon disappears slowly. A hard reset fixes the problem immediately - at least until I re-install Sprite Backup or restore an (executable) backup I made earlier.
What's even more strange is that this seems to be reproducable, even across different ROM versions. I saw that first with the O2 Germany ROM my Trion came with, and also after I updated to the south-african WWE ROM.
Cheers
Daniel
Hey guys, is there a program for Windows mobile 6 that basically copies everything on your phone to a memory card or to the computer. Like copy every single bit of the phone memory. I know there was a such thing for Motorola's that just in case something did go wrong, you could just flash it back to the original backed up state.
SPB backup is great, it will back up everything to your storage card (plus you can schedule it).
It creates an executable which you just need to run to restore everything back to as it was when you backed up. I've used it after hard resetting a few times and it worked perfectly.
It wont work if you're flashing the rom to something different, but if you're just hard resetting, it will be fine.
http://www.spbsoftwarehouse.com/products/backup/?en
Sprite Backup is the way to go, I've used them on all my devices over the last 5 years.
There is an INDEPTH guide to backups on this forum, knock yourself out with that little link in the upper right corner called "Search"
I have used both pretty extensively on the 8525, and in my opinion SPB backup is far more reliable than Sprite Backup. Note that I was testing with SpriteBackup v5.1.0 build 1447 and there is now a newer version available that may work better.
SPB is the best for me.. I'm actually restoring a backup this moment after re-flashing my rom.
Well, finally I tried the (official) upgrade from WM5 (1.8.407.1) to WM6.
I found detailed instructions using SpriteBackup 3.14 or higher. And since Version 5.01 were deliverd with my Herald, I gave it a try!
But that's were this endless night began...
The instructions used "GetUpgradeData.exe" from Sprite Software.
This is what I did:
- I created a complete Backup with Sprite Backup 5.01.
- I did a hard-reset.
- I run the "GetUpgradeData.exe" and got a sbu-file I stored.
- I actually performed the ROM-upgrade
- I installed Sprite Backup.
But wenn I tried to restore the Backup I made earlier I didn't found the "Upgrade-Mode" that was mentioned in the instructions and which I created the sbu-file for.
On the Sprite-Homepage, I got the information, that this functions seems to exist only since 5.1!
So I installed the newest version as trial. But this damn software doesn't restore backup made with older versions of itself! :-O
Since I found no possibility to makes Sprite Backup 6 *do* this, I decided to give 5.01 a try nevertheless. But it didn't work. I actually can't remember anymore, what error came exactly in this situation, but I realized it would work.
Since then I look for a downgrade to restore my backup on good old WM5.0 and try the whole szenario with Sprite 5.1 (I don't like 6).
I actually *found* a WM5-ROM, but it's not 1.8.407.1, it's 5.4.407.1.
- I "updated" the ROM, WM5 runs fine.
- I installed Sprite 5.01.
- I run Sprite 5.01 and got an error mentioning to little free memory!
- I performed a hard-reset, installed Sprite and tried to restore selected parts of the backup to need less memory. It ends successful, but during the following Warm-Start I get repeatetly the error that "The last cold-start" wasn't complete. So it performs a new reset by itself.
And that *are* my possibilities:
- restore all and have to little memory
or
- restore parts an get this weird error.
Why is this? and How can I change it?
I still have the hope that a 1.8.407.1-ROM would fix all problems. But where to take from. :-((
Any ideas how I can save my Herald? Please? It's 7am now an I'm puzzeling for 5 hours now. I want everything back to normal! :-(
Thanks for every help you can give me...
I didn´t really read the howl thread - but
NEVER try to take a WM5 backup to work with a WM6 Rom!!!
You never treid to use a Windows 95 backup on a Windows Vista PC???
So why you wanne restore a backup from a complete different Rom??
Install all new. NEVER use a backup when flashing a new rom.
Just my 2 cents
papamopps said:
I didn´t really read the howl thread
Click to expand...
Click to collapse
No matter. It's just one posting. ;-)
NEVER try to take a WM5 backup to work with a WM6 Rom!!!
[...]
Just my 2 cents
Click to expand...
Click to collapse
Well, my two, too, until yesterdey, when I learnd about that option in Sprite Backup. I quote from the manual of "Sprite Backup 6":
http://www.spritesoftware.com/downloads/SpriteBackupHelp.pdf said:
Setting Upgrade Mode Options
Sprite Backup automatically detects if the restore process is being performed between different devices or ROM versions and automatically enables this function and you will be asked to select the type of 'Upgrade Mode' operation you wish to perform.
ROM: Use this option to perform restore operations between the same devices with different ROM revisions. For example: restoring from a KJAM ROM 2.16.9 to a KJAM AKU2 ROM version.
Device: Use this option when you wish to restore across devices and ROM versions. For example: When restoring a backup file created on a WM2005 KJAM device onto a WM 2006 JAZJAR device.
Safe: If your device does not boot after performing a ‘ROM Upgrade’ or ‘Device Upgrade’ restore use the ‘Safe Upgrade’ operation.
Click to expand...
Click to collapse
The problem is that my version of Sprite Backup does not have this capability unexpectetly. Which I realized when it was to late.
one comment of a nearly flashaddict:
i ALLWAYS install all new. it is much faster after a few month when you make a hardreset and flash new......
believe me. i flashed so many roms - and allways installed it completely new!!
Sure you are right. And actually that's my choice now.
I made it to restore at least my personal data in WM5, backed them up new and restorem *them* on new installed WM6.
Now I'm on the configurating, installing, reconstructing part. :-((
Hi all,
If I upgrade the ROM on my Orbit 2, can I use my latest Sprite Backup to restore my personal settings after upgrading?
If not, what settings will I need to manually replace:
e.g.
1) Contacts, appointments, etc. - via activesync
2) Copilot / Tomom - from original SD cards
3) Network settings - using "Connection Setup" program
4) ...
Am I missing anything? I'm worried that after upgrading the ROM I will spend days getting everything back to normal!
At first, you will spend an hour getting everything back to normal. Then, when you become addicted to flashing roms, you will master the "reload" and it will still take an hour (or close to it). I know with PIM backup (as indicated by the name "PIM"), you can only restore appts, sms, email, contacts, phone logs, tasks and the like. Not sure about Sprite but I'm sure you can't do much more...
timpharrison said:
Hi all,
If I upgrade the ROM on my Orbit 2, can I use my latest Sprite Backup to restore my personal settings after upgrading?
If not, what settings will I need to manually replace:
e.g.
1) Contacts, appointments, etc. - via activesync
2) Copilot / Tomom - from original SD cards
3) Network settings - using "Connection Setup" program
4) ...
Am I missing anything? I'm worried that after upgrading the ROM I will spend days getting everything back to normal!
Click to expand...
Click to collapse
The full last version of Sprite Backup (6.x) provide an "upgrade" mode that should allow a user to restore all his data after a ROM update (without touching the OS part). I never tested it as in my concern I spend less than one hour to fully reconfigure my Polaris after a ROM upgrade. But I'll be interested by all experience sharing with tools like Sprite Backup.
Please check directly to Sprite web site for more informations and welcome back with your findings that I'm sure, will interest more than myself
academic said:
The full last version of Sprite Backup (6.x) provide an "upgrade" mode that should allow a user to restore all his data after a ROM update (without touching the OS part). I never tested it as in my concern I spend less than one hour to fully reconfigure my Polaris after a ROM upgrade. But I'll be interested by all experience sharing with tools like Sprite Backup.
Please check directly to Sprite web site for more informations and welcome back with your findings that I'm sure, will interest more than myself
Click to expand...
Click to collapse
I have used it before on my Artemis and believe me, it's crap. Just an backup works fine but when you have switch to another rom, forget about it. Some apps work decent, most of then not. (80%) The only thin you can do to be sure you can go back after an Flash is to dump you're own rom.
It hangs on me
Sprite hangs on me when I want to restore Bepe 0.53 full backup after flashed back to 0.53 from 0.66. I am trying all the ROMs version to see what is best for me and so far 0.53 is what I called baseline for me. It took me only 2 hours to reconfig my device but the damm sw hangs and I waited much longer than that. When it finished, the device does not boot and I have to do a hard reset.
Sprite is crappy so does spb backup. I have not found anything works!
HaiLe512 said:
Sprite hangs on me when I want to restore Bepe 0.53 full backup after flashed back to 0.53 from 0.66. I am trying all the ROMs version to see what is best for me and so far 0.53 is what I called baseline for me. It took me only 2 hours to reconfig my device but the damm sw hangs and I waited much longer than that. When it finished, the device does not boot and I have to do a hard reset.
Sprite is crappy so does spb backup. I have not found anything works!
Click to expand...
Click to collapse
Thats the point. All those back-up progams work well but now when you flash your rom. You really need a dump of your rom to get back to original. For the rest, SPB, Sprite And whatever back-up apps work all well if you just want to play around with apps and return if you don't like them.
Hi.
I have just brought a hd2,and over the next few weeks I will be trying different os's. But before I start I would like to know how to backup everthink on my my device like data, current os, rom version, radio version etc. Is there one easy program or do I need a collection of programs? Any help would be very much appreciated.
hippy9719 said:
Hi.
I have just brought a hd2,and over the next few weeks I will be trying different os's. But before I start I would like to know how to backup everthink on my my device like data, current os, rom version, radio version etc. Is there one easy program or do I need a collection of programs? Any help would be very much appreciated.
Click to expand...
Click to collapse
There is no point to backup OS,ROM,Radio (you can find and download it anyway if you search here for Radio and default ROM of HTC HD2). Titanium Backup is a good application to backup your data but dunno if it is working with Windows.
HTC HD2 Backup
I have used 'Sprite' Backup for many years, initially with Windows 2003 (many years ago) but I have also being using Sprite for the last two years on my HTC HD2. I create a folder called SPRITE BACKUPS on my memory card (I use capitals because it differentiates my own folders from Windows folders which are in lower case). I use the 'Custom Backup' mode because as well as giving my backed up data a title such as 'BKUP 06Feb12', it also allows me to make a note of what modifications &/or new apps I have installed since my previous backup. Sprite backs up absolutely everything which I have installed/customised on my phone. I backup my data/config/personalised screens to my memory card because if the phone becomes screwed up and you have to Hard Reset your phone you lose everything if you backed up to your phone. I also transfer my backups to my laptop because what good is a backup on your phone's memory card when your phone is stolen.
I then use 'Restore' to return my HTC HD2 to its previous state when the phone gets screwed up. Sprite is good because it searches your phone for all your previous backups.
However Sprite doesn't back up items such as: current os, rom version, radio version, etc. These are not required because when you perform a Hard Reset on your HTC HD2, all these settings are are permanently stored in your phone's ROM and they are returned to normal as part of the manufacturers default setting.
Sprite also do a version for Android but I find it is limited in functionality compared to the Windows version.
Take a look at SPB Backup. I used Sprite before, had a problem with a Restore after a problem with my phone. SPB Backup backs up everything on the phone. I've had to Restore from it three times with no or very minor issues.
Titanium backup leads the way.