Hi,
I’m using a Dynamode usb Bluetooth dongle with Widcomm 1.4.2.10 on WinXP and the bluetoothgps files on my XDA II. I'm trying to access my LAN and the internet using the Network Access profile, but so far I can’t even ping between the XDA and PC.
I've set up OBEX File Transfer and it works fine in both directions. I go to the Bluetooth Manager, add a new connection, browse the services of my PC and add Network Access. I authorise the connection on the PC then the network connection bubble appear on the XDA but it never connects. I've read on several guides that a specific IP address needs to be given, that’s fine, I want to use static IP addresses. So I go to connection settings for BT Network Access and on the Advanced page set the IP address to 192.168.0.101. I've set the username and password to an account on the PC that has access to everything. On my PC, in network connections I give the Bluetooth Network IP 192.168.0.100 and my LAN connection 192.168.0.1 (the subnet mask is 255.255.255.0 for all of them). When I try to connect again, it succeeds, but using vxUtil I get timeouts when l try to ping the PC and vice-versa.
I've also tried it the other way round, setting up the Personal Network Server in Bluetooth Settings and connecting from the PC. In connection settings->Advanced->Network card->BT PAN User Driver I've set the IP address to 192.168.0.101. Again it connects fine, but I can’t ping.
I've also tried the Activesync profile (although this is less important as I can activesync over the network if I get it working). I'm sure I've set Activesync to use the right comm port, but it just says the device is not recognised for one of two reasons.....
This is really frustrating me now, I've tried reinstalling the BT software on the PC side and I’ve tried different versions, but I get the same result every time. I’ve followed several step by step guides on how to do this but still no luck. If anyone's got any ideas please let me know!!
-Tom. A
HI,
Check out this tutorial:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=74
That was the first tutorial i tried, everything works fine until I ping the PC or XDA and I get nothing
-Tom. A
I can ping from my Xda2 to Pc and the same from pc to xda2,everything seems to work fine but..
using resco explorer (trial) It can't find any network pcs.
What's wrong? someone can help me?
Hello Everyone. i have a pc that is hooked up on a LAN that gets net access via VPN on a local host. My PPC (XDA2i) on 2003 se is connected to my pc via Bluetooth on a PAN. so what i need is for the PPC to be able to access the LAN so it can connect to the host computer via VPN for net access... i tried 2 different apoproaches.
#1 I bridged the 2 connections (PAN and LAN) under the same Subgroup as the host. eg : 192.168.0.xx , Host = 192.168.0.1 . problem is the pc is unable to ping the PPC and vice versa. so if they are unable to ping what more establish a VPN connection. strangely, the pc is able to access the LAN, but the ppc isn't.
#2 I tried using XP's ICS. I enabled all the forwarding settings and assigned the PAN a different subgroup IP (192.168.1.xx). VOILA !!! the ppc is able to ping the host (192.168.0.1) I'm assuming the pc is forwarding ping packets to the ppc. but the pc acting as a NAT doesnt help solve my problem. weirdly, the ppc is unable to establish a VPN connection.
the type of VPN is unsecure uncrypted PPTP.
thanks everyone in advance
Hi guys,
I'm running a MDAII (Himalaya) with WM6. 'Cause I don't like M$ Active Sync (and it doesn't work ) I wanted to establish own TCP/IP Connections to my PC (winXP).
When the PDA is connected to the PC the "Remote NDIS-Host" is activated on the PDA and I get on the PC the "Windows-Mobile-based device" (WMBD). So far so good.
Cause my local network is configured as 192.168.x.x I assigned manually to the Remote-NDIS-Host (Connections->Networkadapters->Remote-NDIS) a 192.168.x.x adress and on the PC to the WMBD too.
Ping from PC to PDA works. But thats it. If I run "vxUtils" and watch the Info field, it tells me, that the PDA's current adress is "169.254.2.1" even tough its configured to another one which is shown by vxutils beyong the adapters information.
Any idea why I can't override that 169.254. adress ?
So long
Honk
Btw. - if I assign 169.254.2.2 to the PC WMBD and 169.254.2.1 to the PDA I can establish a FTP Connection to the FTP Server on the PC listening at 169.254.2.2; but a connection to an also running WEB Server via IE doesn't work ..
Hi, i need help about connecting my Pocket PC and using ICS
So this is what i want to achieve:
1. I have internet connection on my laptop via LAN
2. when i connect my HP IPAQ 114 with usb cable and sync using Active Sync i have internet on my PPC
3. I have another laptop that i want to "give" internet to via my wireless card on PPC connected wireless-ly to Laptop2
4. This is the scenario i like to create:
http://digitanium.blogspot.com/
Can someone help me with this?
I do the same thing as my curent internet is from a usb modem
so i turn on internet sharing on my pc
and set my phone's ip to be on the same subnet in my case 192.168.0.X
set my gateway to the ip on the pc in my case 192.168.0.1
set my dns to the same dns the pc use
if you don't know your dns
you can get it from a console and typing
iconfig /all
on your pc
tnx but i tried that and then i don't have internet on pc1 because of the mac of it is my password to the internet provider
can i somehow fis that?
ok i set my Local connection1(internet) to ics to the local connection 4 (activesync created and it made its address 192.168.0.1)
this seems to be normal but now my active sync can not connect to my device
and my laptop1 ip must be 10.10.16.79
So I want to use remote desktop on my TP2 to connect to my laptop at home. I've done all the requirements to allow to use this feature; I've enabled port forwarding in my router settings and I have enabled remote desktop on my laptop's Windows 7 system properties. And on my TP2 I enter my ip address for the "computer" field, my Windows 7 account user name in the "user name" field (I only have 1 account on my laptop and it is admin), and the account password in the "password" field. After all of this, my TP2 will still not connect to my laptop. At this point I am pulling my hair out trying to figure out what I am doing wrong. Can anybody help?
Does your computer has public IP Address?
Yes. I go to www.whatismyip.com and it displays my ip address. I've tried entering this address in the "computer" field as well and nothing.
you'll need to forward port 3389 through any router you may be using (check out portforward.com)
you'll also need to enable RDP connection on the machine through System>Remote.
there are 1001 guides you'll find with a quick google, its not a phone specific thing.
edit: ive previously found that the WM RDP client wont start a 'net connection itself. if you find the same, just do it manually through com manager or check ur mail etc.
Did you forward port 3389 to the internal ip address of your laptop?
Do you have a software firewall on the laptop that may be blocking access?
First try to figure out where the error occurs.
Try to connect to your pc, using an other pc ( from outside )
If it works, it must be a setting in your mobile device.
If pc also doesnt work, it should be a port problem, in that case, try using hamachi..
Oh, and check if you dont have a blocking program, or firewall .. like suggested above
Does my phone need to be connected to wi-fi in order to use remote desktop or will it just use my carrier's data service?
develop1 said:
Does my phone need to be connected to wi-fi in order to use remote desktop or will it just use my carrier's data service?
Click to expand...
Click to collapse
it will use any data connection available, no need to connect to wifi if you have data plan activated.
some tips:
1. you must have NAT (port forwarding) configured in your router
2. If your router has public IP address on WAN port, then point 1. is just sufficient if you are on some routed network, than you need to ask your provider, maybe you will be lucky
2.1. (here are network ranges used as private, only for identification)
from 192.168.0.0 to 192.168.255.255
from 172.16.0.0 to 172.31.255.255
from 10.0.0.0 to 10.255.255.255
3. point 1. specification - enable NAT from WAN port to local IP address of your computer, specific port is TCP 3389. Also is good to make a reservation on DHCP server for this PC.
4. you need to enable remote desktop on your PC
4.1. computer properties - remote desktop setup - and its middle line on remote desktop settings
4.2. click "choose users" and check if your account is listed
Thanks alot to everybody's help! Your advise allowed me to get this things working, I really appreciate it. I had the port open and had remote desktop enabled on my computer but the thing that was killing me was I had the windows firewall on and my ESET Smart Security firewall on as well. Once I disabled them I was able to make the connection. What a head ache those firewalls gave me. I thank you all once again for your assistance.
I want to remotely access my PC from TP2, what software do I need to install on my phone?
sheharyar said:
I want to remotely access my PC from TP2, what software do I need to install on my phone?
Click to expand...
Click to collapse
The answer depends on what you have available to connect to. Your network (if any exists) and the machine/OS you want to connect to.
If you could let me know the following, I'll see if I can help:
How you machine's connected to the net. (for example, mines something like PC>Router>Cable modem>outside world).
The operating syustem in use on your PC. Specifically please, the edition and version is important to know. Mine's Windows 7 Ultimate, for example.
but, to cut a long story short: if you're not using a home edition of one of the recent windows OSs (XP and later), I'd suggest Remote desktop's the best way to go. There's a .cab knocking around here if you don't already have it on your phone and the PC end's described in the 'Configure Remote Desktop' and 'Configure Your Router' bits of this page: http://www.microsoft.com/windowsxp/using/networking/expert/northrup_03may16.mspx (ignore the other sections, they're not relevant unless you're running IIS)
enjoy
I have a WIFI Router installed, have a laptop with VISTA ULTIMATE and PC with XP Professional.
I am already able to RD my laptop from my PC.
I want to RDS my laptop from my phone via the same network/WIFI. I think it is pretty simple.
This is what I am doing
I have installed Remote Desktop Mobile
I have connected to WIFI
when I run Remote Desktop Mobile & enter my laptop's name, with username and password and click connect, connecting remains on top and is not connecting it. I am not in any domain, do i have to leave the domain name empty?
if you're not using a domain, leaving it blank's right.
Does it just time out on your phone?
Do you get the same if you try connecting via IP instead of your machine's name?
mad_tunes said:
if you're not using a domain, leaving it blank's right.
Does it just time out on your phone?
Do you get the same if you try connecting via IP instead of your machine's name?
Click to expand...
Click to collapse
I am able to connect from my pc.
When I try to connect from my phone either by IP or computer name, it does not even time out, it just remains stuck at Connecting...
Nothing happens after 5 minutes, even no error message appears.
sheharyar said:
I am able to connect from my pc.
When I try to connect from my phone either by IP or computer name, it does not even time out, it just remains stuck at Connecting...
Nothing happens after 5 minutes, even no error message appears.
Click to expand...
Click to collapse
Your laptop seems to be configured well ( you can access it using the pc )
So it must be a setting in the phone. You sure it is connected to wifi , maybe it stays on 3g ) Or maybe your laptop only allowes 1 ip to connect ( the pc's ip )
I am even able to connect to my laptop over internet as the port 3389 is fwd.
Do I have to configure anything on my phone other than installing that cab file?
Or maybe the cab file I've installed is corrupt or something, can someone please share the cab file?