Hi,
sometimes I want to dial a code and append a phone number of a stored contact.
Result should be like this (only example):
#31#phonenumber
But when I type #31# there is no way to insert a stored phone number.
What can I do? Thx for help.
I am surprised - from my point of view it is a very basic feature of mobile phones.
There is no hint or soluion?
Nobody else with this issue?
I remember that
You could use VITO copy paste to solve this problem.
Thanks for the first reply .
have read about your recommendation. Using VITO copy paste requires follwing steps (if it works in the dialer of TouchFlo):
- Open a contact
- Click to edit the contact (to get an textfield)
- Copy the number
- Open the dialer
- Write the code
- Paste the number
Hmm, no easy way to choose a contact directly from the input field of the dialer?
Hmm, Than im afraid cant help you further..
Alternatively you could manually hide it ( Start/Settings/Phone )
But i think thats common knowledge for you
However, there does not seem to be a chance to use this basic feature.
I asked once more in Rhodium forum and got a very good tool as workaround:
http://forum.xda-developers.com/showthread.php?t=544649
Related
I have recently bought an XDAII and am very happy overall. One thing driving me crazy is when I have a missed call and view the number in the call log there is no way of adding the number to an existing contact.
You can add to a new contact but not new contact - even just being able to copy the number to the clipboard would be good...
At the moment I have to write the number down from the log and then go into contacts and enter the number manually. MANUALLY! this isnt supposed to be what technology is about! :?
Can anyone help.. please?!
If the number is not in your contacts, adding as a new contact is easy. If the number is say, a new / alternate phone number for an already exisiting contact, the only was is to create a new contact then copy the number, go to your existing contact and paste it. Then go back and delete the new. temporary contact. It is a bit of a pain but I can't think of any other way at the moment !
Ravi
Thanks for the reply. That is the way I am doing it at the moment but seems very long-winded! Have been looking for perhaps a third party app which makes clipboard functions available from apps which dont have it as standard (such as call log).. no luck so far.
Very often I have to write an SMS with one hand, but it is impossible with Qtek 2020.
I would like to find a software where you can write an SMS with the standard mode (like on normal GSM) with standard numbers 1-9 with letters on them.
I use D9 to find the contact and I think it is very usefull.
When you find a contact and you tap the SMS button near the number it should be very appriciated to have a standard GSM input letter mode (like T9) instead of default SMS client of WM.
Do someone know if a software like this exists?
Thanks for the answer,
Urosh
GO to www.yorch.net and look under "software".
I' don't find any software I described before.
Please let me know which one do you think do what I said.
Thanks,
Urosh
I apologise, I thought it was on yorches site, here is the link for you, it is a superb piece of software and it is FREE. Anybody else wants a brilliant sms program make sure you get it too.
http://www.handango.com/PlatformSea...siteId=1&txtSearch=designlab&zsortParams=true
I just found a bug in this program when running on xda2, if you push "select" button when entering phone number it gives an error, but ig you spend a little time inserting all your often used numbers you can use the drop down becuase it remebers the last 20 numbers that you have used, its worth a little time to set it up becuase it saves a lot of time in the long run.
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
i think, only way is spb fullscreen keyboard or typeango ..
It's working fine on my XDA-II with T-Mobile ROM 1.60. The only thing is that if I am trying to send to local mobile number I have to enter the number with '+', country code etc. while I could use 'short' number with ordinary mobile phone.
Zeljac said:
Actually it's not working at all with my mda ii It says: message sent successfully, but later on-message not delivered Do you have any idea what I could be doing wrong? Is there a special format in which I have to put the number of receipient?
Click to expand...
Click to collapse
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Its a serious shortcoming, its a pity somebody couldnt patch on the ability to select searchwhich would bring up the contacts list, any offers from you programmers please???
unfortunately, found no way around it, I used to enter '+' with soft keyboard using a pen. The only temporary solution which comes to my mind is the list of numbers used to send SMS already (there should be some 25 numbers kept).
Zeljac said:
Ok, that seemed to do the trick. Tnx a lot, it's working now flawlessly. But, I still have another question -how do you input "+" directly from the SMSwriter. "+" is on the same key as the "0" and whatever I do I keep getting "0". Of coarse, I could call up the keyboard but for that would again need a stlyus
Click to expand...
Click to collapse
For me is impossible to use this software only with my fingers.
It has too small dialogue boxes (to find the contact).
For me the best solution would be to have a D9 program that integrates a SMS client which has the same keypad which is at the start of the program (with big buttons) to write to message (when the contact has just been selected).
Bye,
Urosh
Thought I'd throw this one in incase I'd missed something.
There appears to be some basic failings in the ability to cut and paste phone numbers between various applications on the WM phone.
Take the example that I receive a SMS text message from someone not in my contacts database.
I know who the person is and I want to create a new contact entry using the received phone number.
There appears to be no way of cutting or copying the phone number from the messaging section and pasteing it into a new Contact.
Or it may be that I already have an entry for the person I just don't have their mobile number number in the contact record (or what ever new number is received).
Have I missed a trick here - or indeed is this a limitation that exists. If there is a work around I'd love to know. i just have such an appauling memory for numbers that I couldn't even remember between flicking between applications - let alone the scope for error.
Thanks
Re: Annoyance with WM5 behaviour related to number cut and p
Open the message (instead of just reading it from the list or notification window). You'll note that the From: field is already selected.
Press the Menu softkey, then Save to Contacts.
Simple as that
OK so that allows you to create a new contact. Once you have them in contacts you can do a copy of the number and paste it into an original record. Then delete the new contact just created. Ideally I'd like to miss out the intermediate step of creating another new contact - for those where I know I already have a contact entry, but just not with that particular number.
I agree with you.
There should be an extra choice after save to contact.
Like new contact/ add to contact.
The same with email. If i want to add an emailadres it makes a new contact.
An other problem i find is that copy/ paste is not always available when i select a text.
When I rename a file in file explorer I can't select the word and copy/paste by "tap and hold".
Now i use GSPocket Magic to copy/ paste
You would have thought that on the, what is it, 3rd iteration of WM they could have sorted this out.
It is behaviour like this that can make all the diference between something that is really user friendly and something which is torturous.
Hopefully there are some influential people who read this that can feed it back to the powers that be.
You can try PQz fot copy/Paste : http://www.nicque.com/PQz/
This there too : http://forum.xda-developers.com/viewtopic.php?t=33343
open up the message, where is says the from tap and drag on the screen to highlight the number then tap and hold on the highlighted but then when the menu opens click copy
Has anyone found a utility or a way to automatically dial numbers using a calling card? This is a rather convenient feature in my previous (non-WM5) cell phone that allowed me to import my corporate phone numbers and then use automatic calling card to dial them without editing hundreds of entries in the phone book.
I have noticed the "Callingcard" code sample at MSDN, however, there does not seem to be a compiled binary available anywhere and I do not have the development environment available.
Any help or tips appreciated.
Ihave been using this one
It is one of the importat things for me
so I use Program called "Long Distance Dialer (Pocket PC Phone) 1.3"
it works on WM2003, WM2003SE and I am runing it right now on WM2005
http://www.pocketgear.com/software_detail.asp?id=12595
good luck
DNO
Thanks! I did not realize it even runs on WM5. However, it does not see to go past dialing the access number - goes to reorder / busy tone right after. Is there a trick / fix to it?
I am using it on HTC Wizard
I never had that kind of problem
I don't know how to help you
This is my settings
Name: My card name
Acces#: my number (only numeric )
Dial Seq : PIN/Destination
Wait: 1Sec Pin : My pin
Wait 1 Sec Destination
then I go to Contacts I right click on the name I want to dial , it gives me optioon >> Dial using : then Name of my calling card .
When I click on that it gives me list of the phone numbers unther that name .
Since I call from USA I do need to select option << Add 011 before number >> but I do not do it because I added 011 to all phone numbers that I call with the card , in the Contacts
I hope this will help.
Good luck
DNO
I installed Long Distance Dialer 1.5 on my PPC. I like it so much that I want to register ($4.99). However 1.5 cannot be purchased anywhere anymore. Did anyone manage to purchase a registration key for 1.5? Or alternatively are 1.3 registration keys inter-changeable with 1.5?
This seems like a great piece of software, but it won't seem to accept pins less than 4 numbers. I have all my number listed with the country code first, so I need to add 00 to call them. In the past, I've configured my calling card feature to use 00 as the pin, which works great, but I can't get this to do it and I don't want to manually add 00 to all my numbers!
Many thanks for any help,
Paul
The link is to version 1.3. What you need is version 1.5. A quick Google will give you two or three sources.
1.5 has no limitations, but has an annoying trial notice pop-up each time you use it. Where can I purchase a registration key?
Thanks for the reply. I've downloaded v1.5, but it still won't let me enter a pin of less than 4 digits. Any thoughts?
Many thanks,
Paul
Solved the problem. In v1.5 you can put spaces as well, so, even though it needs at least 4 characters, I can put two spaces and then the two zeros.
Best,
P
Interesting - I was trying to solve my problem with the software dialing only the calling card access number. I defined an address book entry with the whole number with pauses - and still only the access number gets dialed. The card I use follows the "Number followed by PIN" model with a second dial tone after you dial the access number and a third one after the called number. Any ideas what could be causing the issue? Could it be that the Wizard does not recognize that the call has been completed after it dials the access number?
free and the best calling card dialing software
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
My email to the author (VSOFTCODE) of LDD bounced. Looks like I will have to remove it after the trial expires.
Edit: I just managed to purchase a licence through Handango after all.
----->chaniana
Thanks works fine!!
chaniana - BIG thanks - it works flowlessly.
Now - if I could only get it to dial the number before the PIN!
reg key
Well I know this is not a warez site but
would it be wrong if I give out the reg code ??
I think not ,because the software no longer supported by the developer.
what you think ???
One more thing !!
I have Version 1.3 which I bought from www.pockeatgear.com
where did you find v1.5 ???
Let me know
DNO
this is cool....
chaniana , i have been looking for something like this for a while... i have 2003 not 2005 to be able to complie or change this...
I am just migrating form treo 650 and am missing a program TakePhone. what it did it let me create rule
e.g. any number starting with a string it will use a calling card so i could set +44 use a calling card x
that way when i disl a number it will intercept the call an see the first few digits, if +44 it will dialthe calling card and wait for me to hit a button to enter a pin then eait for another button to dial the number, all in a few strokes i was dialing international and never had to change my contacts. when i was there in UK all i do is disabke the rule and voila i am in business...
see if u can do this
i did something similar in VS2003 creating from scratch an app that would list the contacts and i enter a ph and pin in 2 seperate textboxes and hit dial, got it to make a call to the 1800# but could not figure out how to dial the rest automatically so i am stuck
Long Distance Dialer 1.5 at handango.com.
Just pay the 5 bucks, it may inspire others to create affordable useful software!
This software doesn't work with PocketInformant. Any solution ?
I installed Long Distance Dialer 1.5 (Trial), entered Calling card (access#, PIN)
I can see new menu item when I right click "contact", but when I select "Dial CCard" NOTHING happe! No call started.
I'm using Wizard.
Hi
I am not able to see any context menu once I tried using by stylus
I am on WM6.1
Is it still usable
cheers
chaniana said:
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
Click to expand...
Click to collapse
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
televisi said:
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
Click to expand...
Click to collapse
Use the "Find" from Programs, type phone number, select "Contact" and voila!
Ow... I didn't realize that this possible as last time I tried them but resulting nothing (probably the number is not exist there and I assumed this function is not working)
Sorry questioning this question as I should read my manual more
you have to put number exactly as it writen in contacts... +38039....
and name will appears
Yea, I just notice that you need to enter exact number (with / without space) otherwise will not show anything... totally a bad search function...!!!
you can use Smart Dial: push green key then, just digit 5-6 cifres of the number and the pda will search all the contacts that contains the 5-6 cifres sequence.
televisi said:
Hi
I tried to search in magician forum about this, but it seems not find any similar to this
Have you ever have a feeling to find name by phone number? as for instance I got miss call from 123 111 number but does not show any name in my missed call list
so I open up contacts, but unfortunately, it only allows me to search by name not by phone number...
any idea how to do this?
THanks so much
Click to expand...
Click to collapse
Try the Standard Search option and you can find the contacts by numbers. Cheers
Hm... found anomaly here:
For some reason I tried the Smart Dial skizz0 mentioned, but for some reason it does not show the contact details when I type them, but when dial them it shows correctly
Eg:
what shown in contact:
Home
(61) 3 1234-5678
so I try smart type in smart dial:
12345678
during smart dial typing, no result shown
BUT
when I dial them, after a while it shows "HOME"
Weird isn't it...
for my opinion this "hyphen" method in contact get upside and downside:
upside ==> we can read it easily
downside ==> for some reason the program confused to recognise them...