I've updated my ROM to the new official HTC rom and now my SD card now keeps getting lost! If I remove and replace it, the phone finds it and works fine for a while but then any applications that use the card stop working and when I check the memory, it says "Not Installed". HTC have been their usual helpful selves (not!), when I told them it was a 16Gb Sandisk they said the Jade can only use 4Gb cards. Strange how its worked perfectly for the past 8 months.
On a different note, does Net 3.5 have to installed on the Device or can it go on the card?
Any help would be much appriciated. If not, its Flash time!
Regards,
Woolly.
Just an update on this thread. I managed to get the SD working again but it needed formatting and not just any format. The standard format option on the PC didn't work, had to download a formatting tool. It had also corrupted the card enough to make it difficult to retrieve all of the data on it, so some was lost.
Is the new ROM any good? Can't see much of a differance except for the improvement to Opera. On balance I wouldn't recomend updating.
Woolly.
Related
Hey all,
I've searched through this as much as I could, and found a few things, but nothing that's ident.
My problem occurs even after a clean hard reset, and has only happened since the latest ROM update, so if anyone else has it please can you say if you get this problem... or don't...
Basically, my T-Mobile Pro will work fine for a while, but then I go to it any time after 10 mins of being clammed, and with virtually everything I try to load it comes up with an error dialog saying:
"The file 'X' cannot be opened. Either it is not signed with a trusted certificate, or one of tis components cannot be found. You might need to reinstall or restore this file."
But this is with EVERYTHING, HTCMesages.exe, HTCCalender.exe, Contacts.exe, TomTom Navigator.exe...... EVERYTHING, ARGH!
The only way to sort it is soft reset, and then everythings okay, for a while anyway... till all of a sudden.....
The only things I've got on apart from the standard T-Mobile ROM is TomTom Navigator 5.21 and PocketBreeze 5. But I'm sure it's nowt to do with either of those...
Please someone, anyone,,, HELP :-/
ARGH! Just after I posted before I hard reset and got it going again.... until now.... :evil: :evil:
1st: Do you use a SD Card? If YES, does the file you try to open in the SD card. Try using a different SD card and see if you still get the same Error Message.
2nd: Do you use WM5torage or Softick's SD Card reader? If YES to either of them, you might have set them on "ACTIVATE" mode then of course you will get the Error message if you try to launch any application on the card while using any of them because you gave the control to your computer to read the card instead. The solution is to keep then on INACTIVE state while using the apps or install them in the Internal Memory rather than the card.
Hope this helps.
cktlcmd said:
1st: Do you use a SD Card? If YES, does the file you try to open in the SD card. Try using a different SD card and see if you still get the same Error Message.
2nd: Do you use WM5torage or Softick's SD Card reader? If YES to either of them, you might have set them on "ACTIVATE" mode then of course you will get the Error message if you try to launch any application on the card while using any of them because you gave the control to your computer to read the card instead. The solution is to keep then on INACTIVE state while using the apps or install them in the Internal Memory rather than the card.
Hope this helps.
Click to expand...
Click to collapse
Thanks for your reply, but unfortunately it's not the SD Card, its core windows mobile applications aswell, like the contacts and messags.
I think it might have been to do with the ROM I was using, I was using T-Mobile's latest (still pretty jurassic though) but switched to the iMate one, and no problems now :-D
Surprised if it is the ROM though, as thought others would have got the error :-/
Here is the solution. I have a Samsung mobile phone and got this error after I installed Samsung's standard multimedia player "Touch Player" into My storage. Then I uninstalled it and re-installed into main storage and it works now.
I am having some trouble with my 4gb card in my XV6800. I have had it since January and been happily adding things to it and deleting them at will. Now I am having a problem with it however. I can add things to it through My Computer etc on windows and it shows up fine. But after a few hours when I go back into it on File Explorer on the phone any changes I have made are not in effect.
This includes both things that I added that are not there, and things that I have deleted that re-appear. Any ideas? It is not helping my wanting to install cabs and set up my UC config as you can imagine.
I know that they are transferring at some point because I m,anaged to install a cab from there last night, this morning, the original cab and folder is gone.
I'd suggest backing up everything currently on the card first, then formatting it using a card reader. Once the format completes, restore your files and see if your problems still exist.
P.S. Any microsd card <= 2gb will work for flashing. Anything > 2gb won't.
gc14 said:
I'd suggest backing up everything currently on the card first, then formatting it using a card reader. Once the format completes, restore your files and see if your problems still exist.
P.S. Any microsd card <= 2gb will work for flashing. Anything > 2gb won't.
Click to expand...
Click to collapse
I agree with this... backup your storage card, and format it using software on your device such as CNETX FlashFormat... that seemed to do the trick when I was having issues related to the Storage Card
I was getting the error" file protected". I did lots of research, tried to format it in both my phone and laptop to no avail. I used diffrent software,nothing gave. Some people claim that putting clear tape on the SD adapter lock did the trick for them. Anyway, I contacted SD as my last resort,got an RMA and now I am awaiting a replacement. I did a back up and transferred all to 1 GB that I had as a back up.
FYI
I used SD Formatter V2.O and Hard disk Wipe tool (hddguru.com) , Format claimed to be successful but data was always there. This started after I installed TOMTOM maps on the card. Good luck man
there is a cab to enable sd cards over 2GB for the titan
i suggest some searching, if i come across it ill post the link
I have Tom Tom on my card, but then I have done from the start and I have only had the problems pretty recently. My computer wont read the card in the built in card reader in my computer, but it reads the new 1gb one fine.
Also, the phone does recognize it because I can play music off it, I just cannot add files to it or delete from it.
I have tried to format it with CNETX FlashFormat and it doesn't seem to work, everything is still on there as before.
Very annoying, I am going to contact SanDisk
Good idea man, it sounds like you have the same prob I do. Try putting tape on the protection switch on the adapter. It didn't work for me but who knows!
Hello folks,
I figured I would go to the experts to get an answer to my question.
On my universal I was running Windows Mobile 6.1, I didn't really like it as the phone was unstable, so I downgraded to Tmobile Windows Mobile 5 (which is what ships on the phone) everything is running smooth (Shout out to SPB Shell 3.0 AWESOME!!!)
anyways after the downgrade which went through without incident, my SD card reader does not SD cards, I know it is not hardware because it worked fine when the device was running WM6.1.
Anyome have any ideas as to what happened?
the device simply does not recognize any size, 32MB all the way to 2GB.
I have searched and found nothing.
Anyone have an updated driver for the SDCard reader?
I have extRom installed so I can put whatever I want into EXTRom and have it install.
Crapgame
It's because native WM5 can't use SDHC (SD cards are only up to 2GB). I think you can simply install SD settings by OllieD - where you can change to Type 1 or 2. Sorry unless someone else can help, you'll have to search for it.
I think i have the same issue.
The device sometimes see the card when set to standard SD or SDHC Type-I but it's really inconsistent.
Driving me nuts.
I had a similar problem, i had to eject and reinsert the card multiple times to get it to see it. The card SEEMED fine because it would work in my pc (via usb adapter)) and digital camera with no problems. But when i tried the one from the camera in the universal it worked fine, absolutely no problems.
So I bought a new sandisk one from ebay and all has been fine since, seems like it was being picky about the original SD!
i think, the sd card is formatted fat16
you formatted with "Haret"?
Haret?
Sorry for the noob question, but what do you mean?
I have tried formatting the card fat16, fat32, NTFS
nothing works
I have even tried install SD settings by OllieD adn that did not work
according to the specs I should be able to use my 2GB Sandisk Extreme III 2.0 GB SD Card, but alas my uni just does not see it.
any other suggerstions tips?
Also does spbsoftwarehouse's backup work really well?
I want to try some other ROMS on the device and I dread having to reinstall everything and reconfigure it too.
I would much rather back the dang thing up then experiment with various ROMS and then if nothing is to my liking, put my old ROM back with all my 'stuff'.
I have similiar problem.
In the past I have changed many ROM's from Tomal and many others. WM 5, 6.1, 6.5 and never had a problem with the card.
My last ROM where everything worked was Luca15thebig. After that I wanted to go back to Tomal V8.9 and then my problem started:
I did DOC format (always do that), put Tomal's ROM - ups, no SD card (with any SD card settings).
Did some searching on the forum, found similiar problem which was solved by flashing some factory shipped i-mate ROM. Again, DOC format, flashing that ROM (it is all-in-one ROM: radio, ext-rom and operating system). Booted that system (wow, time-warp to past ), frankly I didnt expect that my 8GB SDHC will work there - and it didnt.
Again DOC format> flashing Tomal V8.9 ROM> upgrading radio (that i-mate ROM reverted it back to 1.03). After a while booted Uni with Tomal's ROM, no SD card. Tried all settings, nothing.
Tried same thing but with that new Thing V2.3 ROM (very fast and stable BTW). Same thing - no SD card in file explorer.
My card works in my laptop. I even tried to format it in laptop - and my Uni still dont see it.
My friend has an Uni and I tried that card in his device. It works (he is using Tomal V8.7 ROM). Tried his 1GB SD card in my Uni - not working in my device.
Im no specialist but i think you guys have a hardware issue with the SD port. Maybe loose or something inside. Hope thats not the case. If multiple cards using multiple Roms do not work in Uni but work anywhere else then I would have someone or myself check to make sure the SD slot is soldered properly still.
i've encounted many issues with the SD + sdhc drivers for the universal, i'llw rite up a longer post with more information later as i've had a long day.
summary: keep trying different cabs, one will eventually work. make sure its formatted FAT32. popping it in and out+softresetitng a few times may be required.
So I have this Issue I found my 16gb HD2(I no longer have the hd2) that's I guess corrupted I can view the files move them to my desktop but I cant format the SD, I tried my Nexus One, digital camera, Windows 7, Macbook,ubuntu, mini partition tool and testdisk with no results. I remember this issue happen when I tried to run android through SD maybe you guys know why. thanks
Some sd cards especially ones that have been bought on ebay or overseas have a memory hack in them. What happens is the sd card shows 16gb but in reality it may only have 6-10gb. The hack provides the sd card to show more space then is actually there. You can use it just fine with no problems at all but once you go over the actual memory it really has & not just shows you then get a slew of corrupted files on your sd card leaving it almost useless. This is only 1 example, others causes could be if you take an ad card out while you transferring files to it. In the end there is little you can do and what I would of suggested you've already tried. (minitool) this has helped me fix a card that I was transferring files when my power went out. This will probably not help but have you tried different ports on your computer? What happened when it was in you nexus?
Sent from my Desire HD using XDA App
htccraze said:
Some sd cards especially ones that have been bought on ebay or overseas have a memory hack in them. What happens is the sd card shows 16gb but in reality it may only have 6-10gb. The hack provides the sd card to show more space then is actually there. You can use it just fine with no problems at all but once you go over the actual memory it really has & not just shows you then get a slew of corrupted files on your sd card leaving it almost useless. This is only 1 example, others causes could be if you take an ad card out while you transferring files to it. In the end there is little you can do and what I would of suggested you've already tried. (minitool) this has helped me fix a card that I was transferring files when my power went out. This will probably not help but have you tried different ports on your computer? What happened when it was in you nexus?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Yeah I learn this lesson on my chinese 32gb lol but on my 16gb sd was actually the one that came with the hd2 so I know for a fact is legit. everytime I put it on my N1 it tries to format it and then a message pops out saying card unmounted. I also tried my good old nokia n82 which usually Nokias are really good at formatting corrupted cards it doesn't give me the choice of formatting the card. Im wondering of their some type of lock on the sd card.
there is a really small lock on the front of a sd card but none that i know of on a micro sd. did you use the minitool partition wizard or the data recovery program? if you only used the partitioning wizard i would try the minitool data recovery program found here.
Running mini tool this is what I get it wont fix it though https://picasaweb.google.com/lh/photo/3-oc0r_Bbv5qrYncR3IzCZaCRbbB6vENK-AyJ2O_CkI?feat=directlink
running minitool data or minitool partitioner? it looks like minitool data if i remember correctly. yeah, it says "minitool found errors on disk but will not fix them because diskcheck was run without fix parameters." i would try it again but select "check and fix detected errors" see if that helps. if it dont help then i would suggest to wait for advise from someone a little more knowledgeable about this.
htccraze said:
running minitool data or minitool partitioner? it looks like minitool data if i remember correctly. yeah, it says "minitool found errors on disk but will not fix them because diskcheck was run without fix parameters." i would try it again but select "check and fix detected errors" see if that helps. if it dont help then i would suggest to wait for advise from someone a little more knowledgeable about this.
Click to expand...
Click to collapse
I tried using both none of them cant format the SD card or at least make it usable.
josemedina1983 said:
I tried using both none of them cant format the SD card or at least make it usable.
Click to expand...
Click to collapse
what about good ol' Check Disk from Windows Explorer?
Another program is SD Formatter 3.0.
Try it and play with the options.
SD formatter is pretty good i must say. Here is another one that might be of some use. I have a corrupted flash drive around somewhere so i'll try and find that. maybe I can play around with it to see what might work and report back. I would also take a look at this link as it provides some very useful information about sd cards. you can find that here, please make sure you read the section on "Formatting is required". This will explain why you may be running into problems along with what the cause might be.
Yea the same thing happened to me with my 8 gig card, i even tried formatting it at best buy and with a camera and still wouldn't format. So i just had to buy a new one.
Hi,
After a long history with successful 6.5 updates I thought I'd try WM 7!
I've read the storage card posts and tried a hard reset both with my card and without but always get to the same Storage Card not working error.
I don't have a Nokia to reformat my card but have tried reformatting on the PC.
There is a bit I haven't been able to follow using magdlr 'services' option - how do i stop WM7 from booting and get back to the magdlr menus?
Some advice for a noobie please - don't want to brick my phone but not that fond of the Storage Card Not Working screen either!
thebearhack said:
Hi,
After a long history with successful 6.5 updates I thought I'd try WM 7!
I've read the storage card posts and tried a hard reset both with my card and without but always get to the same Storage Card not working error.
I don't have a Nokia to reformat my card but have tried reformatting on the PC.
There is a bit I haven't been able to follow using magdlr 'services' option - how do i stop WM7 from booting and get back to the magdlr menus?
Some advice for a noobie please - don't want to brick my phone but not that fond of the Storage Card Not Working screen either!
Click to expand...
Click to collapse
I'm sorry to hear about your issues. The micro SD card you've fit in your phone is too slow to cope with the constant read/write imposed by the OS.
The card you've used is unusable unless you unlock it by sending the unlocker cab to your device, unlock it, then format it on your computer. You could also format it on a symbian, nokia device.
Unless you mention the specific part number of your micro DS and brand, I can't help you further, with regards to compatibility, however, some models are proven to work flawlessly on WP7 powered HD2. ( such as sandisk 32 GB)
Make sure to further research, and hopefully you get this sorted out
only old Yuki (Back to the future) ROM lock cards...
all new ROM's not lock cards and unlocking or formatting with nokia device not necessary
if card not working: simple, not supported.. you must buy new card...
you cant brick phone... just read my install tutorial from signature if you something dont know...
Thanks for advice.
For benefit of others the symptoms I had were down to initial install. I needed to use Magldr to free up last 24 of nand memory and then reflash. Now all working.
As ever none of the stickies quite cover everything, but your help and another google session saved the day.
Thanks to the developers! WP7 giving my phone an all new feel.