I am having some trouble with my 4gb card in my XV6800. I have had it since January and been happily adding things to it and deleting them at will. Now I am having a problem with it however. I can add things to it through My Computer etc on windows and it shows up fine. But after a few hours when I go back into it on File Explorer on the phone any changes I have made are not in effect.
This includes both things that I added that are not there, and things that I have deleted that re-appear. Any ideas? It is not helping my wanting to install cabs and set up my UC config as you can imagine.
I know that they are transferring at some point because I m,anaged to install a cab from there last night, this morning, the original cab and folder is gone.
I'd suggest backing up everything currently on the card first, then formatting it using a card reader. Once the format completes, restore your files and see if your problems still exist.
P.S. Any microsd card <= 2gb will work for flashing. Anything > 2gb won't.
gc14 said:
I'd suggest backing up everything currently on the card first, then formatting it using a card reader. Once the format completes, restore your files and see if your problems still exist.
P.S. Any microsd card <= 2gb will work for flashing. Anything > 2gb won't.
Click to expand...
Click to collapse
I agree with this... backup your storage card, and format it using software on your device such as CNETX FlashFormat... that seemed to do the trick when I was having issues related to the Storage Card
I was getting the error" file protected". I did lots of research, tried to format it in both my phone and laptop to no avail. I used diffrent software,nothing gave. Some people claim that putting clear tape on the SD adapter lock did the trick for them. Anyway, I contacted SD as my last resort,got an RMA and now I am awaiting a replacement. I did a back up and transferred all to 1 GB that I had as a back up.
FYI
I used SD Formatter V2.O and Hard disk Wipe tool (hddguru.com) , Format claimed to be successful but data was always there. This started after I installed TOMTOM maps on the card. Good luck man
there is a cab to enable sd cards over 2GB for the titan
i suggest some searching, if i come across it ill post the link
I have Tom Tom on my card, but then I have done from the start and I have only had the problems pretty recently. My computer wont read the card in the built in card reader in my computer, but it reads the new 1gb one fine.
Also, the phone does recognize it because I can play music off it, I just cannot add files to it or delete from it.
I have tried to format it with CNETX FlashFormat and it doesn't seem to work, everything is still on there as before.
Very annoying, I am going to contact SanDisk
Good idea man, it sounds like you have the same prob I do. Try putting tape on the protection switch on the adapter. It didn't work for me but who knows!
Related
I am using wm5storage v1.75 and every time with out fail if i try to copy a file over 3 or 4 MB it failes i even tried to disable the advanced network functionality in settings but it still did not work. i read that an older version works better but i can't fine an older version anywhere. can someone post it.thanks
Hi,
Try here: http://forum.xda-developers.com/showpost.php?p=1033294&postcount=21
Regards,
Silviu
Yes, 1.73 is the one that I use without any issue. Unlike 1.75, it will not stop recognising the USB disk midway through the transfer.
thanks for the link
UPDATE: i just tried the program and it works great but when i get done using it and deactivate it I can no longer see my mini-sd card. anyone know a fix for that
irus said:
thanks for the link
UPDATE: i just tried the program and it works great but when i get done using it and deactivate it I can no longer see my mini-sd card. anyone know a fix for that
Click to expand...
Click to collapse
I'm afraid that I seem to recall that v1.73 fried an SD card of mine - I deactivated without first stopping the drive on the PC. When I reformatted the SD card in a card reader, it was only 1Gb (previously 2GB). Was never quite sure the first time if it was WM5torage or a duff card.
Then it happened a second time with a different card. The card wasn't even a cheap import - it was a corsair. If I remember rightly, there is a Linux tool to repartition the card and I seem to recall Corsair were going to create one too(check their forums). [Have just checked the xda-dev archive and my origianl post was here http://forum.xda-developers.com/archive/index.php/t-305615.html
All I can say is, I hope it isn't that. Can you see the SD card in a card reader? Can you see it in Start\System\Memory?
i did a soft reset and it came back
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Wow - not bad at all for a first post!
Welcome to the forum!
Thanks for providing a solution!
krnkris said:
PROBLEM:
Now, the problem all started when try to format the micro SDHC on the phone or on the PC with card reader.
Tried with differ format program also low level not worked.
DONT USE THESE!!! Waste of time!!!
SOLUTION:
So after doing some thinking about the situation, I figured that there was a problem with the card inserted and find the file EncFiltLog on it.
It is the WM 6.1 encription file. You can't delete, move files from or in to the SDHC.
The best way to solve this issue, as the hard-reset DOES NOTHING to fix this issue, would be to have windows hopefully find the connected device and format it. Here are the EASY steps which DO NOT involve using a dozen computers and has provided the same result EVERY time; which is a working on my 8gig memory in my HTC HD.
1. Connect the HD to the computer and select DISK DRIVE as the option on the on-screen popup on your phone. Don’t select ACTIVE SYNC. If you miss it, then go into your phone and press START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok.
2. On your computer, (USING A WINDOWS XP MACHINE), go into your "My computer"
3. A window for will open with two columns.(If not, change the view to "Group") We are looking at the RIGHT side right now. In there is has three categories, and we are only focusing on ONE of them. LOOK for STORAGE which should be the center category.
4. Click with right to the desired "Storage device; A: ; D: E;", it will take a minute or two depending on your computer speed and environment to populate your hard drive and connected memory devices.
5. You will eventually see your PHONE internal storage listed. IT WILL TAKE SOME TIME BECAUSE YOUR PHONE INTERNAL STORAGE IS CORRUPTED!
***BE SURE WHAT YOU ARE LOOKING AT IS IN FACT YOUR PHONE AND NOTHING SOMETHING ELSE LIKE YOUR MAIN HARD DRIVE OR SOME OTHER STORAGE DEVICE WITH IMPORTANT FILES ON THERE***
****I TAKE NO RESPONSIBILITY IF YOU FORMAT THE WRONG DEVICE***
6. Choose format and let it format the drive. This should also take a few minutes. Select FAT32 and name is whatever you want! Let this finish COMPLETLY!
**Your almost done**
7. Now you can copy, anything you want on it, but if you put again in to the PDA then the
EncFiltLog will come on again. But at least you not have to throw away the card,
you can use it again.
8. Finally my last comment:
If you want to speed up the card (.cab installation, copy, move ...etc.....)
the best way after all this work listed above, you should made a BACKUP from all your PERSONALITIES and
make a HARD RESET.
After it should speed up all the programs and processions with the card.
If you done then one IMPORTANT THING!:
YOU SHOULD NEVER EVER TAP ON THE CARD ENCRIPTION IN THE SETTINGS,
NOT EVEN THINK ABOUT IT!!!!!!
Hope this helps you all out!!
BTW: I want to say thanks to XDA-FORUM (all people) to make my life easier
and to found the right gadgets to use, to play and enjoy it....
Click to expand...
Click to collapse
Yesterday it happens for the second time that my SD-Card gets corrupt again, the first time it happens with a 8 Gb SDHC Sandisk and now with a 16 Gb.! After a hard-reset.Didn't know before I read this post that this could happen ever!??
And indeed I couldn't write or read on the card or format it again, even with a cardreader!
Both cards are useless about €120,- thrown away, gone
Didn't know before I read this post, that this is an WM 6.1 encription issue. Never used or even tap it.
Now I format another 8Gb like the way you describe here, i hope that when i need to do another hard-reset i can use the card again!
BTW, its a little bit strange to me that there are so little reaction from other users here about EncFiltLog problem?
I hope that there will come a solution in WM 6.1 to prevent that b!llsh!t.
Thanks for the great support, i hope it realy works!
Nice post
I have one more question:
What may happen when I delete this encryption file? Is it possible?
P.S. Sorry for my english :/
Hi Everyone!
The best way, if you purchase a new card, to FORMAT at first.
Then you put in to your phone and try not to teke it out any more.
If you want to use it as USB reader the as I write in my first post
START>SETTINGS>CONNECTIONS TAB>USB to PC and select the bullet of DISK DRIVE and hit ok .
In this case you can use the phone as a card reader.
It is speed up the file transfer vs. ACTIVESYNC.
If the card is not recognised ether way then,
because of the too much taking out - - put it back; went to faulty.
You can go back to the store for guarantee replacement.
The EncFiltLog is a problem only if you encrypted the card.
The solution to delete it and use as new card described in my first post.
If you put a new card in to the Phone then this file seem to be created by the OP system.
You can delete with format, but it will come back again and again.
krnkris said:
You can delete with format, but it will come back again and again.
Click to expand...
Click to collapse
Your right, the file is still there again!
But I have also a question about a next( hope not) hardreset on my device!
Is it better to format the SD-card (with USB on the device) before or after the hard-reset to save the further use of the card?
Because in my experience you have to start installing everything over again, because the data on the card was anyway corrupt and useless.
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Valynor said:
It is NOT recommended to use the MS Windows Format command to re-format any SDHC card - it will format them, of course, but with the wrong cluster size, slowing access speed down and possibly causing other problems.
I would suggest to always use a tool like Panasonic's SD Formatter when formating any kind of SD card. You can get it here: http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
-Valynor
Click to expand...
Click to collapse
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
luckyuser said:
Also good to know, but does it also prevent or solve that EncFiltLog problem?
Is there no registry tweak to turn off or delete that W 6.1 encryption option anyway?
Click to expand...
Click to collapse
No as far as I know.
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Phil_123 said:
Will creating a read-only, hidden folder called "EncFltLog.menc" on the card prevent this problem?
Click to expand...
Click to collapse
What do you mean?How do you do?
HI folks, glad to find some peeps who are suffering from the same problem...
The solution here seems not to work for me, as I hard-reset my TouchHD before I found out about that encryption ****up...
Is there any solution that allows you to reformat the card?
Not to mention that I NEVER touched that damn encryption option as I really never trust M$ that far with my data... seems it got me Pwned anyways...
Anyone ever tried to Write M$, tell them what a bunch of wacky Ho's they are and demand a new miniSD Card from them?
sorry for my language but atm I mad as hell as I just lost a 8GB and a 16GB sanDisk...
I experienced a lot of bc during all the yaers messing with M$ stuff but this ****up ins unbelievable...
I had the same problem with my 8gb sandisk.
I would like to add that I was able to retrieve most of my files from the memory card using EASEUS Data Recovery Wizard Professional. You need to do the data recovery before attempting to reformat the card.
Hi guys sorry for messing around in your forum but this post is the closest solution to my problem. I cannot format or save anything to my 16gb sandisk card because of that bloody encryption file. Now the problem is that I'm a Kaiser user and I do not have disk mode in my phone, so has anyone successfully formatted their card without using disk mode?
one very quik question. Does this fix the problem for good? you can use the sdhc card with the phone or will it always end up with menc file?
card unreadable in one night
Yesterday, my sdhc 8gb card was working properly but in just one night something happened to it. In the morning, I came to know that it is not more being recognized by htc hd2. Every time I soft reset or hard reset the phone a message come up saying "Do you want to format this storage card to make it readable? this will permanently delete any files on the card." when I click no nothing happens and phone keeps on working and if I click yes then the card is formatted in just 1 second. I tried formatting the card myself from phone format tool (there is format card tool in tools section of the phone) but it is showing only 30.61 mb instead of 8gb.
After reading this thread, I think the problem is with EncFiltLog. Actually I backup my phone and card yesterday with sprite backup. I also backup EncFiltLog on my pc. Now after hard resetting the phone I delete the newly created EncFiltLog file by the fresh WM 6.5 installation after hard reset. I deleted that file from my pc by using the phone card storage as disk drive instead of activesync and simply shift+delete the file from removable storage in My computer. After that I copied all the phone card backup (including EncFiltLog - old one) on the freshly hard reset phone. Now all of sudden in just one night phone sdhc card is not able to recognized by phone.
Moral of the story: Never backup EncFiltLog. Keep the newly created EncFiltLog file by wm 6.5 after hard reset and copy your all files and folder from card backup to phone card (excluding EncFiltLog) after a hard reset. Don't ever overwrite the newly created EncFiltLog.menc file with old one from backup.
Reason: I think WM 6.5 pairs the newly created EncFiltLog with its some key on phone internal storage. Remember how encryption works? I am talking about public key and private key pairing. I think WM6.5 pairs one key stored in EncFiltLog with another key stored inside the phone interal storage which is itself freshly created after the hard reset but when we copy the old EncFiltLog from storage card backup to freshly hard reset phone storage card, those key pairs won't match anymore and windows mobile 6.5 simply locks up the card.
it is my own opinion.
One more clue
Ok guys, I've got one more clue after googling and reading other threads on this forum. May be HTC is supplying fake 8gb sdhc card with hd2.
I've came on that conclusion because yesterday there was more than 5 gb space left on my phone storage card. In the night RSS Hub software has updated all the feeds and stored those feeds on storage card (I've set feeds to be stored on storage card). I think something has been gone wrong there. May be the actual capacity of this fake storage cards in far less than what is written/claimed on the card (i.e. 8gb). In the night as soon as the RSS Hub stored feed on the card, it somehow corrupted the card FAT writting its data on sectors of the card where it should not be.
Hence the card is corrupted now just showing 30.61 mb instead of 8gb. There exists no solution for this situtation till now. I've sent mail to HTC regarding this on their customer support page. Let's see what would happen now. I suspect either HTC or my dealer would say that the storage card don't come under warranty. Let's see now. I will update the thread soon.
My problem is the same.....
after HSPL I faced "Do you want to format this storage card to make it readable?..." and after that I lost my mSD.
Format Storage Card didn't worked. it shows 30.61MB , Cluster Size: 0KB
also Clear Storage didn't worked...
System > Memory > Storage Card > Total storage card memory: Not installed
Is there any other way to fix this problem? because of my country, it is difficult to use HTC Service...
Hi there all,
I am pretty inept when it comes to this technology business so I was wondering if anyone has had experience with this or like this and if so could help me to figure out what went wrong, why and how to fix it a bit easier than formatting the card and hard resetting to reload/reinstall everything... sigh...
So I was just moving some files across to my sd card on my phone when it received a text and when the text was received the folder I was moving the files into all of a sudden had a load of extra folders with weird character combinations (some Chinese characters (not the weird bit) and some of those "forbidden" symbols)... I tried to delete them (about 56 of them) but I was not allowed... I tried to delete them by plugging the phone into the laptop again, still would not let me (this was when I found out you cant name a folder with certain symbols... if only it was me!) and I finally took the card from the phone and tried to access it via the sd card slot on my laptop... could not scan it but could open it... and when I tried to analyse it with computer management it would not go past the folder that this happened to and told me I had a corrupt folder... sigh, so the only thing I could do to get rid of all these extra mystery folders was to format the card using the cmd prompt... that worked thank goodness but I have had to spend all evening reinstalling and reloading everything... what fun... still at least its given me a clean slate so to speak... sorry for the long winded post... any ideas as to what happened?
many thanks
Consider yourself lucky - relatively.
My Xperia toasted a 16GB card to the point where it is totally inaccessible by any explorer system, either on the phone or a PC. Even the format command via command prompt fails (but thanks for that idea).
My replacement card is suffering too - I run Pocket Mechanic's scandisk utility regularly (once bitten, twice shy), and a couple of times now I have had a FAT table mismatch. Thankfully I've been able to copy all the files & folders off the card, reformat it and load the data back on again.
I'm also wondering what is causing these errors. In all my years of PDAs I have never known anything like it - the instability of WM and my Xperia is really disappointing.
I had this problem a few weeks ago . I guessed it was caused by a Chinese program which generated folders repeatedly by accident. Luckly, I could format the 16G SD card and restored all files.
Had Same problem
except it did not happen when receiving a text. I researched a bucn and stumbled across this http://www.datarestore4dummies.com/Index.html. I Purchased the data recovery software metioned on this website, Data doctor recovery. If you cannot get your card reader to read the card you will also need the cardexport software mentioned in the website referenced above. It worked perfectly. You can try the Data doctor recovery software for free to see if it can fix anything on your card but it will not restore anything until you purchase it. You will have to rescan which will take awhile, again.
on another note I have started backing up my storage card using cardexport (it basically makes your storage card while still in your phone look like an external drive) and a free microsoft tool called synctoy.
hope this helps
Jbf5333 thanks for the info re the apps that can help I will look into these just in case... cheers
So I have this Issue I found my 16gb HD2(I no longer have the hd2) that's I guess corrupted I can view the files move them to my desktop but I cant format the SD, I tried my Nexus One, digital camera, Windows 7, Macbook,ubuntu, mini partition tool and testdisk with no results. I remember this issue happen when I tried to run android through SD maybe you guys know why. thanks
Some sd cards especially ones that have been bought on ebay or overseas have a memory hack in them. What happens is the sd card shows 16gb but in reality it may only have 6-10gb. The hack provides the sd card to show more space then is actually there. You can use it just fine with no problems at all but once you go over the actual memory it really has & not just shows you then get a slew of corrupted files on your sd card leaving it almost useless. This is only 1 example, others causes could be if you take an ad card out while you transferring files to it. In the end there is little you can do and what I would of suggested you've already tried. (minitool) this has helped me fix a card that I was transferring files when my power went out. This will probably not help but have you tried different ports on your computer? What happened when it was in you nexus?
Sent from my Desire HD using XDA App
htccraze said:
Some sd cards especially ones that have been bought on ebay or overseas have a memory hack in them. What happens is the sd card shows 16gb but in reality it may only have 6-10gb. The hack provides the sd card to show more space then is actually there. You can use it just fine with no problems at all but once you go over the actual memory it really has & not just shows you then get a slew of corrupted files on your sd card leaving it almost useless. This is only 1 example, others causes could be if you take an ad card out while you transferring files to it. In the end there is little you can do and what I would of suggested you've already tried. (minitool) this has helped me fix a card that I was transferring files when my power went out. This will probably not help but have you tried different ports on your computer? What happened when it was in you nexus?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Yeah I learn this lesson on my chinese 32gb lol but on my 16gb sd was actually the one that came with the hd2 so I know for a fact is legit. everytime I put it on my N1 it tries to format it and then a message pops out saying card unmounted. I also tried my good old nokia n82 which usually Nokias are really good at formatting corrupted cards it doesn't give me the choice of formatting the card. Im wondering of their some type of lock on the sd card.
there is a really small lock on the front of a sd card but none that i know of on a micro sd. did you use the minitool partition wizard or the data recovery program? if you only used the partitioning wizard i would try the minitool data recovery program found here.
Running mini tool this is what I get it wont fix it though https://picasaweb.google.com/lh/photo/3-oc0r_Bbv5qrYncR3IzCZaCRbbB6vENK-AyJ2O_CkI?feat=directlink
running minitool data or minitool partitioner? it looks like minitool data if i remember correctly. yeah, it says "minitool found errors on disk but will not fix them because diskcheck was run without fix parameters." i would try it again but select "check and fix detected errors" see if that helps. if it dont help then i would suggest to wait for advise from someone a little more knowledgeable about this.
htccraze said:
running minitool data or minitool partitioner? it looks like minitool data if i remember correctly. yeah, it says "minitool found errors on disk but will not fix them because diskcheck was run without fix parameters." i would try it again but select "check and fix detected errors" see if that helps. if it dont help then i would suggest to wait for advise from someone a little more knowledgeable about this.
Click to expand...
Click to collapse
I tried using both none of them cant format the SD card or at least make it usable.
josemedina1983 said:
I tried using both none of them cant format the SD card or at least make it usable.
Click to expand...
Click to collapse
what about good ol' Check Disk from Windows Explorer?
Another program is SD Formatter 3.0.
Try it and play with the options.
SD formatter is pretty good i must say. Here is another one that might be of some use. I have a corrupted flash drive around somewhere so i'll try and find that. maybe I can play around with it to see what might work and report back. I would also take a look at this link as it provides some very useful information about sd cards. you can find that here, please make sure you read the section on "Formatting is required". This will explain why you may be running into problems along with what the cause might be.
Yea the same thing happened to me with my 8 gig card, i even tried formatting it at best buy and with a camera and still wouldn't format. So i just had to buy a new one.
Sometime after I installed safestrap and a second rom, I lost the ability to write or delete from my external SD card. It may have something to do with SAFESTRAP, or possibly an app called SDFix: KitKat Writable MicrosSD which I installed and may have ran in preparation for any type of KitKat update. Anyone have any ideas of what I may have done?
edit for more info : The weird thing is, it lets me go through the motions to delete a movie file with say ES File Explorer, but when I reboot, the file is still there and I am able to watch the same exact file I thought I deleted. Also, if I set my camera to write external, it seems like it works, but when I reboot, the files aren't there anymore. Luckily the few pictures I tried taking like that were uploaded to my dropbox before I reboot..... Also, if I create a new folder and paste a file into there, the folder won't be there when I reboot. Also, it seems like my titanium backup files aren't updating, they all seem to be dated February 28 and they won't update even though it goes through the entire backup process!
ssmaster said:
Sometime after I installed safestrap and a second rom, I lost the ability to write or delete from my external SD card. It may have something to do with SAFESTRAP, or possibly an app called SDFix: KitKat Writable MicrosSD which I installed and may have ran in preparation for any type of KitKat update. Anyone have any ideas of what I may have done?
Click to expand...
Click to collapse
Have you tried taking the card out and seeing if it works properly on a computer?
airmaxx23 said:
Have you tried taking the card out and seeing if it works properly on a computer?
Click to expand...
Click to collapse
That is a good idea. I'll try once my co-worker comes back from lunch so I can borrow their microsd-usb adapter. The weird thing is, it lets me go through the motions to delete a movie file with say ES File Explorer, but when I reboot, the file is still there. I am able to watch the same exact file I thought I deleted. Also, if I set my camera to write external, it seems like it works, but when I reboot, the files aren't there anymore. Luckily the few pictures I tried taking like that were uploaded to my dropbox before I reboot.....
The card is an 64GB Sandisk, and the computer won't recognize it, I believe because of the way it is formatted. When I get home, I will try to connect via USB 3.0 and see if I can dump everything to my PC and go from there....
ssmaster said:
The card is an 64GB Sandisk, and the computer won't recognize it, I believe because of the way it is formatted. When I get home, I will try to connect via USB 3.0 and see if I can dump everything to my PC and go from there....
Click to expand...
Click to collapse
Your computer should still recognize it though.
uhh ohh, its a VDI virtual system, and it says this card needs to be formatted before windows can recognize it....
I am copying everything over to my PC over USB. I will try the card in a card reader to see what can be done. If I format it, and if it works after format, should I have confidence that the card won't crap out on me in the future¿???
I am finally able to format it using a slow format in Windows 7, lets see if it works...
Nope, still broken with all previous files in tact.
I'm having the exact same issue and I bet others are too. At first I thought it was something to do with an ESexplorer update since I never happened before it, but I've deleted ES and tried many other file managers/explorers and still have it happen. Someone has to know how to fix this.
nickgordi said:
I'm having the exact same issue and I bet others are too. At first I thought it was something to do with an ESexplorer update since I never happened before it, but I've deleted ES and tried many other file managers/explorers and still have it happen. Someone has to know how to fix this.
Click to expand...
Click to collapse
I had the same issue with the same card. After a lot of research I found that my SD card had somehow become locked...I know...WHAT? My sd card is looked with no way to unlock it. I can view files on it but i cannot add files or delete from the card.
I emailed Sandisk asking them if they had a solution but I never heard back from them
I have tried every solution that I have found and none have worked...
I've gone through 6 San disk 64gb class 10 cards between my Note 2 and Note 3 with my last cropping out 2 weeks ago. San disk will replace your card and tell you to contact the phone manufacturer. I did that contacted Samsung...at 1st I got the run around but I was persistent and got a hold of a good tech support agent. Samsung phones have issues writing info to the 64gb class 10 cards. They are aware of the issue and are working on a fix as of 2-3months ago. He told me the will work fine. He said they don't recommend over 32gb and a class 4 card because of the stability issues of files being corrupted on class 10s particularly 64gb 1s. Funny thing is i called San Disk back and told them what i was told and asked for a 32gb lower class and he told me i could buy it buy they could only replace it with the same one i had. Good luck!
Sent from my SM-N900V using Tapatalk
You know this is not the first time that I've heard of this. I actually had a 10s 32Gig SanDisk micro that I ended up losing because of this problem with my Galaxy S3. I got to work one day and set my phone down on the desk and it just seeming stopped working. I don't know what it is with the 10 series cards but it seems like they all have some kind of problem.
Thanks everyone for all the info. I guess I'll have to get another card and I'm going to be sure it's NOT another SanDisk.