Thats the isue
there is voice if i speak a little bit louder but not as good as it is with headset or bluetooth (handsfreeheadset - whatever).
If i enable in settings audio control for recording it is much better and with resco audio recorder it gets even better. So is there any setting for the phone app.?
I had 1.14 , 1.13 1.10 and again 1.13 radio
L26 3.2 , 3.55 , topix 2.7 and miris 6.5 the same results
any idea for the problem?
ps. i have been looking into blackstone service manual the microfone is permanent on main board (page 93/96), so any other ideas about solving the problem?
might be dust in the ruber??
tried that... didn`t work
http://forum.xda-developers.com/showthread.php?p=3747208
Related
Hello
Does anyone know if there's a calendar soft that allows to select several days and change its colors?
My son vacations are comming and i would like to select on the calendar the days he's at home and give them diferent color.
Another thing, on Qtek 9100 i recorded incoming calls with notes soft, and it worked fine, now, on trinity i can't hear the other person speaking, only my voice. I tryed Resco Audio Recorder and its the same, i can't hear the other person.
On notes, on voice recording format i have selected: 44.100Hz; 16 Bit; Stereo (172 Kb/S).
pm recorder
thats a physical limitation in most phones. see pm recorder site for list of phones that can record both sides of conversation. my wifes tornado is one of the lucky few. a workaround suggested is to set all your calls to speakephone and reduce system volume. crappy workaround but until someone writes a better system hook for sound routines.. (like they can do for a2dp etc) we are all stuck!!
it was working!!!
Strange !!!
I tried this ... long time ago ..not that long ... maybe months... it was working like a charm ... i was recording the voice of both me and the one on the other line ... and the voice was clear and load ( without using the speaker) ... i was using resco audio recorder ...
now i tried nothing works !!!
tried resco ... tried vito ... it just won't work!!
i thought it might be due to windows mobile version
i went back from 6.1 to 6.0 ... to 5 and still nothing is working!!!
STRANGE !!! dunno what's missing ...
maybe the radio version ??? i dunno which one i was using ... could the radio version .. be of any relation ....
because i'm 100% sure I recorded by Resco before ...!!!
did any one try different radios ???
i tried 1.50.08.11
and 1.46.00.11
couldn't get it...
Hi, I'm in trouble with my wizard, I don't understand where the problem is, but it's related to the speakers:
- the lateral speakers works when I recive a call, they play my ringtone
- no sound at all when I setup the ringtone and I test it
- no sound at all when I play windowsmedia
- no sound at all when I make a call (no lateral no central speaker)
- bluetooth headset works perfectly
- every other function work perfectly
I opened my wizard but all the concetors seem ok... What's happening? Any expert that can help me in finding the problem?
My configuration:
- Imate K-JAM G3
- WM6 Wizard_19855_Clean_V1 (but the same problem with original rom and other 5 roms that i've tested)
- radio 2.25.11
Thanks to all that can help.
Andrea
SOlved
I don't know why and how but after a fresh reflash of the rom (I used an ITA one) everything is working good.
I have no idea what happened.
Now it's ok.
bye
If somebody can help me analyze the problem I have with my HTC P3600, It would be very helpfull.
Since 1 week I can not get the audio out from the phone internal speaker (ear speaker).
When I connect a simple USB Headset it is working OK (I get the audio), when I switch to the loud speaker it works OK. But as soon as I come back to normal mode (ear speaker) It does not work any more.
I reloaded Radio ROM and FAMAN ROM Version 4.2 but no change.
Any other suggestion ?
Thanks
Additional information
BY the way this is my current Software version:
OS ROM: FAMAN 4.04 FR
RADIO ROM: 1.50.08.11
Hi.
I have exact same problem. Started just today, any suggestions would be helpful please. Thanks
Steve
I have the same problem. My Htc p3600 works correctly in alimentation way but in normal way no audio (ear and tone) is present. is it possible that a old battery can be the problem?
Resolved with new battery and WM6.1 Elegance edition
I recently updated my HTC HD2 to WP7 from WM6.5.
I have noticed when I use my blue tooth headset the quality of my conversation to the other person is terrible.
I can hear them perfect however if the person listening to me complain that they hear every other word or it simply keeps on cutting in and out.
I'm currently using a Jawbone ICON and I recently purchased a HTC BH M300...
The quality of the conversation is improved if I lower the volume to 7 , however I then cant hear them clearly.
Need help with this as everything else works perfectly.
Thanks
Have you tried updating the Radio (not sure if that will help), but do you have this issue with any other ROM (WP7, Android and/or WM) on the same phone?
No problems prior. I had WM6.5 and Android 2.2 and 2.3 running very well.
Current radio ver 5.51.09.29_22.32.50.10U that's what is written in the WP7 about settings.
After replacing the radio version from 2.08 - 2.15 as suggested, my blue tooth now works correctly. Thanks Drashna
I recently bought a (almost) brand new HD2 running winmo6.5.
I did some testing on winmo6.5 and there doesn't come any audio from the (original) headphone!
checkt settings on HD2 with winmo 6.5, Tried other (4pin) headphones, whitout any result..
I checkt the 3.5 jack if any of the pins are bend or soldering was loose but that also seems fine.
Then i went on to instal miui android on the hd2 (which runs superb by the way)
and there was also the same problem: no audio from 3.5mm jack.
(did instal and unstall with magldr1.11/HSPL4/DFT/task29/SPL-2.08HSPL)
the strange thing is that the mediakey's on the original headphone (previous, play/pause, forward) on both winmo 6.5 and miui android works absolutly fine!
well i'm now back again with winmo 6.5 to see if a fresh start with the winmo rom worked, which it didn't (did soft resets and hardresets multiple times on both roms)
Some info on the HD2
winmo 6.5 rom: 3.14.404.2
Radio: 2.15.50.14
SPL: 3.03.0000
model: HD2 t8585
Can anyone help me out? can it be the radio or audio drivers on hd2?
And does anyone know if Micro-usb to 3.5mm (female) audiojack is supported?
Your awnser is much appreciated!
Ps. I did my best in researching the web about the same problem but didn't find any threads on my subject.. if there is one please let me know and sorry that i probably didn't see it.
AWester said:
I recently bought a (almost) brand new HD2 running winmo6.5.
I did some testing on winmo6.5 and there doesn't come any audio from the (original) headphone!
checkt settings on HD2 with winmo 6.5, Tried other (4pin) headphones, whitout any result..
I checkt the 3.5 jack if any of the pins are bend or soldering was loose but that also seems fine.
Then i went on to instal miui android on the hd2 (which runs superb by the way)
and there was also the same problem: no audio from 3.5mm jack.
(did instal and unstall with magldr1.11/HSPL4/DFT/task29/SPL-2.08HSPL)
the strange thing is that the mediakey's on the original headphone (previous, play/pause, forward) on both winmo 6.5 and miui android works absolutly fine!
well i'm now back again with winmo 6.5 to see if a fresh start with the winmo rom worked, which it didn't (did soft resets and hardresets multiple times on both roms)
Some info on the HD2
winmo 6.5 rom: 3.14.404.2
Radio: 2.15.50.14
SPL: 3.03.0000
model: HD2 t8585
Can anyone help me out? can it be the radio or audio drivers on hd2?
And does anyone know if Micro-usb to 3.5mm (female) audiojack is supported?
Your awnser is much appreciated!
Ps. I did my best in researching the web about the same problem but didn't find any threads on my subject.. if there is one please let me know and sorry that i probably didn't see it.
Click to expand...
Click to collapse
Most likely are:
#1. faulty headset (no connection to audio) or incompatible (not all 4 pins headset are compatible with hd2;
#2. faulty audiojack on hd2 ( no connection on motherboard or discontinued ).
No fault from radio or audio-drivers.
No way for audio from usb for hd2.
bib*oops said:
Most likely are:
#1. faulty headset (no connection to audio) or incompatible (not all 4 pins headset are compatible with hd2;
#2. faulty audiojack on hd2 ( no connection on motherboard or discontinued ).
No fault from radio or audio-drivers.
No way for audio from usb for hd2.
Click to expand...
Click to collapse
Thank u for the quick awnser!
that's strange because the headset is the original one which came with the phone..
Tested the headset with another phone and it did work perfectly
and i checkt the audiojack and as far i could see there weren't any soldering points loose.
strange..
AWester said:
Thank u for the quick awnser!
that's strange because the headset is the original one which came with the phone..
Tested the headset with another phone and it did work perfectly
and i checkt the audiojack and as far i could see there weren't any soldering points loose.
strange..
Click to expand...
Click to collapse
Weird, indeed!
I'll stick with faulty audiojack connection on motherboard or bent connectors inside audiojack...
It wouldn't harm to double-check...
seems there are other people with the same problem. check out this thread to see if it will work for you. Also here.