Database Users

Bluetooth connection problem since radio upgrade!

I have upgraded to the new O2 Rom 169 and all seemed ok, until I started to install my bluetooth head set.
Since I upgraded my radio ROM to 1.03 I have lost the connections to my headset.
Prior to the upgrade it worked perfectly, now the recieve functions just will not work.
I have down graded to the radio 1.00 ROM but the same thing is happening. So the upgrade seems to have corrupted something more important.
Can anyone help here?

Downgrade to previous ROM
I have now downgraded to the previous ROM 1.11.162WWE, and that seems to have solved the problem.
I have installed the Radio ROM update and that seems to work OK now, so I will stick to this for the moment, unless someone has any better ideas!

Hello,
I had the same problem. It seems, the old bluetooth software won't work with the new radio rom. I tried my bluetooth connection before restoring my old stuff from backup, and it's ok. I didn't have any serious things in my backup, so I reinstalled my software from install cd's - sorry, I had no time to figure out, wich software causes this issue, but hope this information will help you.
Z.

i also having problem with my bluetooth but I cant say the problem is from new radio ROM or others because i dont know the real cause. A message display and wrote
"Sorry! Bluetooth can no longer be used because the licence is expired"
"BDA ff:ff:ff:ff:ff:ff: Key:E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8"
after that, bluetooth will off automatically.

I have found since the upgrade to the new radio, thanks PUG.
That my Handsfree and Headset Bluetooth issues have lessened.
A few little glitches but will be on the outlook for another patch or upgrade in the future :roll:

Hmm,
I have radio 1.00.00 version with t he original Asia ROM and something funny has happened:
Since the beginning, I successfully connected to Logitech and Hello II BlueT headsets + a generic car BT handsfree.
I had to perform a hard reset after one of my progs messed the registry and reinstall everything (less the troublesome prog <g>).
Since then, the BlueT handsfree does not work properly: I hear the ring but there is no volume control from the headset and I hear nothing + mike does not work. The rest of the BT conections work flawlessly, except for some rare disconnects from my BlueT RBT-2001 GPS.
The story in this thread is not encouraging but one thing is clear - the BT problems that I have are with the original radio and EROM and not after an upgrade. I have no clue what all this means except for the fact that tere is something quite problematic w/ the Xda IIi BT connectivity that I didn't have w/ any of my previous PDAs.
I thought to u/g the radio version only but decided to go for a full u/g (less the O2 stuff), hoping that my BT problems will go away.
Please correct me if I'm wrong - should I go ahead with the PUG O2-less upgrade or should I keep the old (but clearly buggy) versions?
Maybe all the problems that we have are connected to specific manufacturing HTC batches? Has anyone researched this? Is there any info correlating between problems and Xda IIi serial numbers?
Best regrads,
Al

Blutooth handsfree problem source still not clear

Hi,
I have radio 1.00.00 version with t he original Asia ROM and something funny has happened:
Since the beginning, I successfully connected to Logitech and Hello II BlueT headsets + a generic car BT handsfree.
I had to perform a hard reset after one of my progs messed the registry and reinstall everything - NOT from a backup but from scratch (less the troublesome prog <g>).
Since then, the BlueT handsfree does not work properly: I hear the ring but there is no volume control from the headset and I hear nothing + mike does not work. The rest of the BT conections work flawlessly, except for some rare disconnects from my BlueT RBT-2001 GPS.
The story in this thread is not encouraging but one thing is clear - the BT problems that I have are with the original radio and EROM and not after an upgrade. I have no clue what all this means except for the fact that tere is something quite problematic w/ the XDA IIi BT connectivity that I didn't have w/ any of my previous PDAs.
I thought to u/g the radio version only but decided to go for a full u/g (less the O2 stuff), hoping that my BT problems will go away.
Please correct me if I'm wrong - should I go ahead with the PUG O2-less upgrade or should I keep the old (but clearly buggy) versions?
Maybe all the problems that we have are connected to specific manufacturing HTC batches? Has anyone researched this? Is there any info correlating between problems and XDA IIi serial numbers?
Best regrads,
Al

TyTN Bluetooth | Random car disconnect

Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm

Yep, got exactly the same on my BMW 630....
Can t find any tweak but....
I am a heavy email user (thru BlackBerry connect) and I noticed that
the higher the number of messages stored, the higher disconnections appears.
At the same time, the TyTn is slower and slower....so my idea that this is related to some timeouts somewhere....
For your complete info, the MS bluetooth stack in my previuos S100 have able to.....immobilize my 630 !!!!!!!!! yes, incredible...
The MS stack messed up with the BMW bt ...and this later would stay ON for ever...even after switching car s power off.
This was sucking the car s battery untill the car would start !...
BMW could not reset the BT module unless disconnecting battery....but...then the active steering had to be re adjusted with the proper BMW computer...
This is a real story.

johnmclean said:
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Click to expand...
Click to collapse
I have the same problem with a CK3100 kit, don't have a solution, but would like one, didn't have this problem with a Jasjar nor Wizard

TyTN bluetooth | random disconnect when using car handsfree - more details
Thanks for the replies so far.
Although the following thread did not help me with my problem, it might help one of you. If you're having problems mostly related to issuing voice commands using M$ VoiceCommander, I think there *might* be a solution in that other thread for you.
Just to reiterate my problem; my TyTN keeps randomly connecting and disconnecting from my car's built-in hands free bluetooth device.
There was a time when if i managed to made a call after first starting the car - before the first random disconnect - the phone would remain connected until the next time I started the car. That no longer appears to be the case.
-jm

I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.

Has anyone tried a ROM with aku 3.3?

jasonrhcastle said:
Has anyone tried a ROM with aku 3.3?
Click to expand...
Click to collapse
Yes.
And on my CK3100 I now no longer get disconnects. I did have to uninstall jetware as it wasn't reliable. My TyTN now connects perfectly and no longer drops.
One thing I did find is that the TyTN hates it when more than one handsfree device is in its trusted list. Make sure that the ck3100 is the only handsfree device paired.

http://forum.xda-developers.com/showthread.php?t=247520&highlight=bluetooth+keeps+disconnecting

ajax007 said:
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Click to expand...
Click to collapse
I've tried changing the automatic switch off setting and it made no difference on my SPV M3100 (with Parrot CK3100) - I reckon that the external power is what fixed your problem (this has worked for others too).
Sadly it's not a convenient fix as I like to leave my phone in my pocket when I'm in and out of the car. Orange say there is no 'issue' so there's no sign of a ROM update but HTC know of the problem but I have to wait for Orange to release their ROM update. I can't use the HTC update. If only us Orange users could tell them enough times they might listen now that some AKU 3.3s are being released. Orange technical department won't speak to end users like me - they have actually refused to discuss it with me and just pass messages back and forth from customer relations. Any other ideas?

A solution - thanks to Parrot
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!

587dan said:
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
Click to expand...
Click to collapse
If you use the Jetware BT software you can do the same thing e.g. beam the whole contact list in one go and then set the Parrot to not sync by choosing the Ericsson No Sync profile. This is how I have mine set up, also with the Jetware software it sends over the Service Provider, Battery and Signal strength settings to the Parrot, something which the native stack doesnt do.

Solution for this
Hey all, i have purchased a parrot 3100, the software in it was 1.6, i had the same problems but it's greatly and successfully solved using the new jetware 1.3 . i don't know if i can post some linx here, but here you go, if this is illegal for this site please remove them
http://rapidshare.com/files/30296941/JetWare_1.3.rar
http://www.megaupload.com/?d=PL5UX5KC

Bluetooth problem on hw6915

Firstly, I love this phone, it almost does exactly what I want, Ok Windows Mobile 6.x would be good but I can without that, what I can't live with is the Bluetooth problem I have.
My device will not connect to the integrated bluetooth within my Skoda Octavia - it pairs up OK, but won't transfer the phonebook, and then after 5-10mins the connection is dropped! While it's connect it'll receive calls OK. The BT in the car is identified as SKODA_UHV, which I understand is the same of other VAG (Volkswagen Audi Group) cars, albeit with a different name.
It's been back to HP three times, the last time it came back with different BT version software installed, but that hasn't helped.
The car works fine with my old Nokia phone (and the HTC S710), the BT kit installed is the latest Skoda version....
Beer tokens await anyone who can provide a fix.....

do you see "hand free" on this connection? more things iI can think of is that lots of problems are due to lack of memory (device not card) pleas look at other thread on this issue it dose happen with new users ,one more thing is that you can set the connection to be not scure go over the settings

Yes the icon appears - everything is fine and works well for around 10mins, the the connection is broken.
The same happens if the unit is cold booted (thus ensuring maximum memory) and regardless of the security settings.

look for "ms-bt-stock" on xda ,you can also use google like "xda ms-bt..." see if one f the cabs will do the trick but from that day on you will not have your current bt screen (you can uninstall orHR) backup your device before installing so you can hr and restore ,good luck

Bluetooth Problems on X1

Hi,
hopefully anyone has an answer to the strange bluetooth behaviour of my X1.
The first device is a bluetooth headset from Sony. It works good, if bluetooth is activated. But after some time of not using the headset, the phone just switches off bluetooth. Sometimes after a few minutes, sometimes days after my last use of the headset. I tried all settings of the bluetooth-settings with no change. And it sucks if with the next phone call the headset cannot connect anymore because bluetooth was switched off.
The second device is a GNS TrafficBox Plus FM9BT-Y. Somehow MN7 does not detect the device directly, so I have to use the workaround with the serial port and outgoing connection on COM1.
The initial minutes the connection works fine, but then stops and is not restored.
Here as well trying different settings changed nothing.
How can I find out the address of the bluetooth devices?
Is there a tool to further test bluetooth connections (like what speed can be used, the address of the device, etc)
Regards
pt

Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated

Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated

I have Ra2generic DE with the 1.10 radio ROM on it.
At the beginning it was fantastic not having the bluetooth issue. Everything was working so extremely goood... no switching off, no disconnecting of and from the bt headset,, etc...
After a while the issue was here again...damn! So the bt became not very useful in its functionalities.... then I saw that it was not possible to see through my bt freespeech device in the car the last calls on the phone... hm, ok I said. There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..

i have the same problem, the bluetooth disconect without any reason, i have tried more than 10 Roms and i dont have any solution
¿is so dificult for Sony to repare this problem?

zagito said:
There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
Click to expand...
Click to collapse
I hardreseted the device, installed the newest official firmware, deleted the calling list and with great expectations checked bluetooth behaviour.....nothing changed for me
But great it works for you and thanks for the tip

Come on people..... please someone help us with this

Bluetooth with clarion mind
Am having trouble connecting with my new Clarion MIND - is seems the phone does not see the profiles (very similar to the phone adding the older SE Bluetooth Watch, the 100). Has anyone built a .cab to sort this out?