Related
I can't figure out why AdaptROM cannot connect to my XDA. I am running Active Sync 3.7 on Windows XP pro. I have Norton Anti-Virus and several other applications that are always running. I have tried disabling all of them and it didn't make any difference. I am running the new T-Mo WME2003 and the new 6.4 radio stack on my SX-56. It syncs just fine with the PC and has a pairing relaitionship set up.
Neither AdaptRom or any of the .exe upgrade programs, nor Mobipassword can connect to my XDA. Anyone have any ideas why this might be? I have tired using a serial cable and the USB cradle and changing the connection settings. When I originally upgraded it way back when to the ATTWS SX-56 PPCE2002 rom it worked just fine. I hadn't tried it since.
The only thing I can think of is a registry setting being hosed up. I am going to try uninstalling active sync and reinstalling and see if that makes a difference.
Suggestions will be greatly appreciated.
I tried removing and reinstalling Ative Sync and it didn't have any effect. Both programs show an Active Sync error cannot connect to device.
It's as if something must have the port tied up.
Same Here
I upgraded to the 4.00.10 rom on my xda but I can't get either adaptrom or Programme A to run so that I can downgrade the device or reflash it.
Any help would be appreciated as I don't have access to an sd card writer.
Re: Same Here
qtzar said:
I upgraded to the 4.00.10 rom on my xda but I can't get either adaptrom or Programme A to run so that I can downgrade the device or reflash it.
Any help would be appreciated as I don't have access to an sd card writer.
Click to expand...
Click to collapse
I had the same problem U had before. the best solution is to buy a SDcard reader to do the job.
Read more from here http://xda-developers.com/forum/viewtopic.php?t=1717.
Good luck :wink:
I noticed that the 3.x CE developer environment also cannot connect
to a 2003 device.
XDA developer Itsme said:
I noticed that the 3.x CE developer environment also cannot connect
to a 2003 device.
Click to expand...
Click to collapse
Could this mean that some supporting files are missing from the T-Mobile rom? If somebody could get a list of all the files that are different between the 4.00.05 and the 4.00.10 roms then it might point to something...
You can try another hard reset of your xda. That happened to me about a month ago and a hard reset fixed it. Unfortunately I had to create a new relationship etc.. - Jim
I cooked a wm2003 rom in the kitchen, downloaded it and it worked ok but I didnt like it very much, then used my sd card with the original O2 rom and boot to reflash, all fine, installed Tomtom, which ran fine. I then decided to cook a xda developers rom with all the bits, once flashed I installed tomtom, "com port doesnt exist" error, I had already unchecked the box in settings/beam so it isnt that, I have reflashed twice, same problem. No other programs are installed or running besides those that are in the cooked rom. I have now gone back to O2 rom as I need my gps software. Any ideas?
I have now reflashed with an earlier cooked kitchen rom and it works fine, weird.
:roll:
which rom did you flash to get it to work? i have the same problem with my xda using rom 3.17.03 ENG and radio 4.21.00.
cheers.
Smallboy
I found out later that it was probably the "folding keyboard" driver that did it, if you are using tomtom navi make sure that under settings/connections/beams that the box under beams is not checked or it will never work. By the way I reflashed to Special Edition rom 1.2.
cruisin-thru said:
I the "folding keyboard" driver
Click to expand...
Click to collapse
That was going to be my second guess, after the Irda port. The keyboard driver ties up the port, since it's typically in the startup folder.
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums
I have QuickGPS set to autoupdate everytime the HD is connected via activesync.
The problem is, I always get a message appear:
"A problem has occurred with QuickGPS.exe"
Can anyone help?
Thanks!
No more Quick gps after new ROM
I updated my HD with a new official ROM. I can download Quick gps - data only with gprs but not with Active Sync as before. I got an error message: "Connection failed. Please try again later.
The Weather - update is going well with Active Sync.
Does anybody know, how to fix the problem?
Matti23 said:
I updated my HD with a new official ROM. I can download Quick gps - data only with gprs but not with Active Sync as before. I got an error message: "Connection failed. Please try again later.
The Weather - update is going well with Active Sync.
Does anybody know, how to fix to problem?
Click to expand...
Click to collapse
Same here.
Tried an old registry fix introduced in the Kaiser forum - didn't work.
Help anyone?
EthanX said:
Same here.
Tried an old registry fix introduced in the Kaiser forum - didn't work.
Help anyone?
Click to expand...
Click to collapse
Has anybody downloaded the new official ROM? How about Quick gps? Can you update data with Activesync?
Matti23 said:
Has anybody downloaded the new official ROM? How about Quick gps? Can you update data with Activesync?
Click to expand...
Click to collapse
Update via Windows Mobile Device Centre (Vista's version of ActiveSync) has worked for me on the Original ROM, an updated Official ROM and the current up-to-date ROM.
I have not had an issue with QuickGPS not updating via ActiveSync/WMDC.
Answer found! It works again!
I did several things: edited registry entries, copied files and went back.. none worked. What finally did it was one of two things (and I don't really know which was it that did the trick - please try both and do tell):
1. I manually downloaded http://service.mio-tech.com/eeservice/packedephemeris.ee and put it as packedEphemeris.ee under the HD's \Windows folder (note the capital E in the middle of the name - you have to change that!) - this appears to be a manual way to update the QuickGPS database, as described elsewhere here in the forums. Soft Reset afterwards.
2. I removed and reinstalled ActiveSync 4.5... Kinda simpler
So although I spent 4 hours of my life looking for the answer... One of these did the trick
Cheers,
Ethan
Elcs said:
Update via Windows Mobile Device Centre (Vista's version of ActiveSync) has worked for me on the Original ROM, an updated Official ROM and the current up-to-date ROM.
I have not had an issue with QuickGPS not updating via ActiveSync/WMDC.
Click to expand...
Click to collapse
Mobile Device Centre with Vista works also with my HD, but not Active sync with Windows XP. This is the first rom, which has that kind of problem with Quick gps.
Quick gps data updates with gprs and also Weather.
Does anybody know the reason for this problem?
Matti23 said:
Mobile Device Centre with Vista works also with my HD, but not Active sync with Windows XP. This is the first rom, which has that kind of problem with Quick gps.
Quick gps data updates with gprs and also Weather.
Does anybody know the reason for this problem?
Click to expand...
Click to collapse
I took HD to my working place and tried to update Quick gps -data with different pc and Internet connection. It did not succeed.
Later at home Quick gps started to update data with my pc and Active sync.
The same thing happened also with my other Htc - phone, Iolite.
This helped me already the second time. I did not edit Registry or anything else.
Hi to all.
I need a help from you.
I have my HTC Shift and I need to make it works as phone and Gps.
I made an upgrade of S.O. from VISTA to Windows 7 Starter Edition
question are:
1. Can I upgrade a Rom Cooked with phone and Gps on it also now that I made first upgrade to Windows 7 Or I must get it back to Windows Vista to do this.
2. I'm Italian, can I wait for any Italian version Rom or it's just the same
3. I liberated my HTC (Modaco...) but when I use the usbtool I cannot attach to Vista, this is because I put first Windows 7?
4. Which is more suitable for me which ROM COOKED you suggest me to flash and for flash I must use utility downloaded from HTC : htcflash.exe ?
5. What is HardSPL, Do I need this for flashing a cooked rom?
Many many thanks for any possible answer to me.
I need to use it as a navigator with Garmin so I need to have GPS works and Phone also.
Sulilvan2002
sullivan2002 said:
Hi to all.
I need a help from you.
I have my HTC Shift and I need to make it works as phone and Gps.
I made an upgrade of S.O. from VISTA to Windows 7 Starter Edition
question are:
1. Can I upgrade a Rom Cooked with phone and Gps on it also now that I made first upgrade to Windows 7 Or I must get it back to Windows Vista to do this.
2. I'm Italian, can I wait for any Italian version Rom or it's just the same
3. I liberated my HTC (Modaco...) but when I use the usbtool I cannot attach to Vista, this is because I put first Windows 7?
4. Which is more suitable for me which ROM COOKED you suggest me to flash and for flash I must use utility downloaded from HTC : htcflash.exe ?
5. What is HardSPL, Do I need this for flashing a cooked rom?
Many many thanks for any possible answer to me.
I need to use it as a navigator with Garmin so I need to have GPS works and Phone also.
Sulilvan2002
Click to expand...
Click to collapse
Hi sullivan2002!
Just trying to answer you questions as good as I can.
1. I guess so (I use XP), but you have to make sure by reading the appropriate threads. I think you have to leave the wifi and BT connections ON before abandoning Vista, but I also recall that there is a workaround that in case you did not do it.
2. It is up to you, but I think that if there is no Italian ROM version by now there are very little chances to have any from now on. There is no further development on this forum, the developers are just not interested in Shift any more. But I think that there is the original Italian ROM somewhere here, if that's enough for you.
3. I think so, but I have no experience with Win7. Did you install the Shift Control Center in Win7?
4. I use i00 which keeps the appearance of the initial HTC snapview screen and also is using reduced resources. But you might want to try several ROMs, once HardSPL is it fairly easy to replace the ROMs. I also enjoyed Thaihugo's Shift custom ROM "age of reason" and "age of beauty", which are very good. But there are also other very good ROMs that I didn't try. Anyway, look for the appropriate radio rom to match the selected coocked rom.
- Are you aware that there is no solution to use the phone with the headphones, but only with the speaker?
- Are you also aware that you can use the GPS only in a mixed way, the GPS module from the WinMobile side with the programs and maps installed on the Win7 side? This is because there is no access from the WinMobile side to the SD card to host the maps.
- Are you aware that there is no access from the WinMobile side to wifi or BT?
5. Definitely you have to use HardSPL. I did it before leaving Vista, but I am not sure it is compulsory to do it under Vista. But you have to do it, otherwise there are very good chances to brick the Shift.
Here are some hints, but you'll have to do some good reading on this forum:
How to flash ROM
(=copy/paste selections from this forum, not my merit)
"First of all you have to:
• liberate the Shift
• HardSPL the system.
Once you HardSPL this, then you have to
• download CustomRUU (CustomRUU.exe utility) from this Shift forum.
• Run CustomRUU as admin on Vista to load nbh file.
Make sure this RUU_Signed.nbh is in the same folder where CustomRUU.exe.
For beginers: first install HardSPL (read forum for the proper link) then the radio, then the rom.
To install radio or rom, use the main program and run as administrator
- for radio, it is "romupdateutility.exe"
- for rom, it's customruu.exe
The 1.58 radio was the original radio for the european shifts. It will make a hissing sound problem on a rom that was made for the 1.27 radios. "
Please do the appropriate readings of the forum, your Shift is at stake here.
Good luck!
thanks for answering
Hi
first of all thanks for answering me.
I would like to ask you
You said
Are you aware that there is no solution to use the phone with the headphones, but only with the speaker?
but ONLY PHONE or also Music, MP3, Films... Cause I would like to bring with me in my car and sometimes use the JACK PLUG to use with my car amplifier in order to hear music mp3... from that.
For me is just enough to install GARMIN or iGO 8 on windows 7 and run them. So maps are on hd. But I Can't understand why if I unlock Snapview... and I make work SD, I Can't use SD for putting maps and make Windows Mobile recognize it.
I understood I have to go back to VISTA and to to all I made for unlocking and after to reinstall Windows 7 starter edition (is more light and fast and I can sell it, htc better when I will not use it more in the future...)
for HardSPL sincerly I didn't understand how to use it. I thought after unlock (modaco... usbtool...) I could put exe file from htc to flash rom and use cooked rom i00 instead of htc new firmware but maybe I have to do somthing with HardSPL.
As I understood from you I can use Winmobile only for sms email and phone (if will works) and all things do better from Windows side.... gps....maps... music.... films...
Ok thanks dear friend. I see you are in Bucharest. I went in Bucharest some years ago. Am fost la Bucuresti in trecut si am vezut tot tara ta.
Ceau si o zi buna.
sullivan2002
sullivan2002 said:
Hi
first of all thanks for answering me.
Click to expand...
Click to collapse
You are welcome!
sullivan2002 said:
Are you aware that there is no solution to use the phone with the headphones, but only with the speaker?
but ONLY PHONE or also Music, MP3, Films... Cause I would like to bring with me in my car and sometimes use the JACK PLUG to use with my car amplifier in order to hear music mp3... from that.
Click to expand...
Click to collapse
Only phone, there were long debates and high hopes on the forum a few years ago in the time of the Shift Project.
About Music, MP3, Films... I never tried them on the wm side, I guess there is no problem with using the headphones or an external amplifier. BUT there is a reason stopping you to use large files because the SD card does not work on wm side, therefore you cannot access your files.
sullivan2002 said:
For me is just enough to install GARMIN or iGO 8 on windows 7 and run them. So maps are on hd. But I Can't understand why if I unlock Snapview... and I make work SD, I Can't use SD for putting maps and make Windows Mobile recognize it.
Click to expand...
Click to collapse
The HTC Shift is an unfinished HTC job/crippled product on the winmob side, so it doesn't work with wifi, BT or SD card, only with the 3G modem. You can also sync wm via internal usb with the w7 side.
USB and Ethernet are accessible from outside only to the w7 part and not at all to the wm part.
sullivan2002 said:
I understood I have to go back to VISTA and to to all I made for unlocking and after to reinstall Windows 7 starter edition (is more light and fast and I can sell it, htc better when I will not use it more in the future...).
Click to expand...
Click to collapse
Not necessarily, maybe you are lucky. Try first (re)installing the Shift Control Center (shagctrl) on the W7 part. Then start it from top-right button and see if you have access to wifi, BT, 3G, etc.
sullivan2002 said:
for HardSPL sincerly I didn't understand how to use it. I thought after unlock (modaco... usbtool...) I could put exe file from htc to flash rom and use cooked rom i00 instead of htc new firmware but maybe I have to do somthing with HardSPL.
Click to expand...
Click to collapse
You have to HardSPL first before using a coocked rom, otherwise you will brick your Shift wm. You cannot just drop a new rom, you have to enter the bootloader mode first with HardSPL.
With "modaco" you are just liberating your Shift, i.e. unblocking the SnapVue and turning it into the true Windows Mobile 6.0 to allow cab installs. It was said that HTC has chosen this solution (SnapView) to avoid paying the WM license, but I would say also to hide the crippled functionality of the hardware. Be aware of the licence issue if you open the Windows Mobile 6.0, please do some more reading.
If you decide to go for a coocked rom, you have to enter and prepare the bootloader mode, which is initiated with ecshift.exe from W7 without WM running at all. I don't remember exactly from one year ago, but I think that hard-resetting the winmob side and reconnecting the two operating systems via usb are necessary steps preceeding HardSPL. SPL probably stands for "System Program Loader". To HardSPL you have to install the EnableRapi.cab file on winmob side and run ShiftHardSPLFinal.exe on Vista side, which will put the special Romupdateutility (RUU). To flash ROMs after you installed HardSPL you can use the original RUU or CustomRUU.
It is difficult to explain in further details, I am not an expert, but look on this forum for the thread called "Step by step guide to liberate > hard spl > flash Rom" and follow carefully all the instructions there. You have to do a lot of reading, pay good attention to the instructions and hints given by the seniors on this forum. If you have no experience then this is no half an hour job, including the readings you have to spent many hours for being successful in using a coocked rom. But it pays off.
sullivan2002 said:
As I understood from you I can use Winmobile only for sms email and phone (if will works) and all things do better from Windows side.... gps....maps... music.... films....
Click to expand...
Click to collapse
Yes, but for GPS you have to go in a mixed way because of the reduced RAM of wm and of the SD card issues: use the built-in GPS antenna and receiver in the winmob side and install the program and the maps on W7 side; the two sides communicate through the internal usb bus, you have to trigger this connection with USB Tool. Similar for synchronizing the two parts.
GPS is working only with some coocked roms.
sullivan2002 said:
Ok thanks dear friend. I see you are in Bucharest. I went in Bucharest some years ago. Am fost la Bucuresti in trecut si am vezut tot tara ta.
Ceau si o zi buna. sullivan2002
Click to expand...
Click to collapse
Nice to hear that, you are doing excellent in Romanian, congratulations. I hope that you enjoyed the country and the people. Was it as tourist or was it for business?
All the best!
HI my friend
At first for Tourist 1998.. and then business but only for 1 year.
I enjoyed always I came in your country, Romania is a very green and has a beautiful nature and countryside and people were more friendly than here in Italy. But for people, italian people is hard to understand this, due of bad facts and news from some who did mistakes here (more are zigans here who make troubles and they are similated to romanian). Of course here there are a lot of romanians and no all could have a suitable job cause also for crisis that hit our country. I went last year in Cluj for a week and also I took a car a white Dacia like the police car and I made about 1000km to go to Timisoara and return to cluj cause I pay about nothing for airplane.
You said:
Not necessarily, maybe you are lucky. Try first (re)installing the Shift Control Center (shagctrl) on the W7 part. Then start it from top-right button and see if you have access to wifi, BT, 3G, etc.
I can see shift Control Center (shagctrl) from Windows 7 side but what I can do? Why I'm lucky if I could see Shagctrl open? I can't still open SD card from WM also when I click on USBTOOL... Maybe I need to do this in order to put here in my SD, HardSpl, and New i00 rom to be cooked or no? is another way to flash it? Can I connect via Activesync and do that?
Ok I will look on the forum Step by step guide to liberate and try to do it today, but first I have to put on my WM a software called pimbackup.... and SMSexport in order to backup all my sms calls...
Thank
Sullivan
sullivan2002 said:
HI my friend
At first for Tourist 1998.. and then business but only for 1 year.......
Click to expand...
Click to collapse
Hi Sullivan!
Nice to hear about your travels in Romania. Yes, the lanscape in beautiful and most of the people are very friendly. There are good Romanians and bad Romanians, just like worldwide there are good people and bad people.
But not many of the other people make the distinction or are willing to make it.
This is part of the show of this world......
sullivan2002 said:
I can see shift Control Center (shagctrl) from Windows 7 side but what I can do? Why I'm lucky if I could see Shagctrl open?
Click to expand...
Click to collapse
No, you are lucky if, by opening the ShagControl, you can then activate wifi and BT. If not, try reinstalling the ShagControl, it shouldn't take long. If not, you have to look here on the forum for a work-around before going back to Vista.
Btw, did you erase completely the Vista recovery partition or is it still there and you can put Vista back in 10 minutes with the F3 thing?
If you have no other choice then going back to Vista, I suggest to make a back-up image of the W7 OS that you can restore later, it will save you a lot of time.
Regarding the W7 correct installation, I suggest to read the posts of RSargeant, they are very good and he speaks also about the communication part, if I recall correctly.
sullivan2002 said:
I can't still open SD card from WM also when I click on USBTOOL...
Click to expand...
Click to collapse
That's correct. You did not get my message: you cannot open the SD card from the WinMob at all. Not even with a coocked rom.
This is a still open challenge on this forum. It appears theoretically possible, but nobody managed to do it, it is about both hardware and software (drivers and not only) changes.
sullivan2002 said:
Ok I will look on the forum Step by step guide to liberate and try to do it today, but first I have to put on my WM a software called pimbackup.... and SMSexport in order to backup all my sms calls...
Click to expand...
Click to collapse
Yes, you are right, save all your personnal data first, it will completely washed out.
Good luck!
OK
Hi my friend.
Ok yesterday I made some changes to my HTC SHIFT X9500
I put hardspl, it was not so easy cause I made it 3 times, always system said me something like: I cannot open port.... and didn't want to start but at the end after 2 times and after I reset my device...it did fortunately.
I could put a cooked rom: i00
sincerly I'm not so satisfied 100% cause resolution...and other things but sure better from the previous
I wanted to put the 6.5 Rome for htc shift from CLIO 28/3/2010 but I cant download it:
http://romeos.monx.biz/index.php?option=com_content&view=article&id=56&Itemid=93
it's very nice but nothing to do, link is out, maybe I have to pay something to the author to download it.
Now I have inside i00 ROM Cooked but If I want to put another ROM Cooked or the original Italian Rom I have to put again HARDSPL or not? I used one time hardspl is it enough?
AFTER I upgrade Windows Visto to Windows 7 Starter Edition
I would like to ask you this:
After I upgrade to Windows 7 and I go to WM side, I cannot Attach it !!!
Attach to Vista and when I go to Windows 7 side I cannot see Pocket PC
How I can do? Is it possible or I have to remain with Vista? Oh Damn !
MY objective is to put GARMIN PC to my HTC SHIFT and use it as navigation and Mp3 device connected to my Car Radio Amplifier.
Ceau
Sullivan2002
sullivan2002 said:
Hi my friend.
Now I have inside i00 ROM Cooked but If I want to put another ROM Cooked or the original Italian Rom I have to put again HARDSPL or not? I used one time hardspl is it enough?
Click to expand...
Click to collapse
Yes, once is enough, but only until loading again an original rom (I think)! May be we get also someone else on this forum to confirm it (that after loading the original rom is necessary to HardSPL again).
sullivan2002 said:
After I upgrade to Windows 7 and I go to WM side, I cannot Attach it !!!
Attach to Vista and when I go to Windows 7 side I cannot see Pocket PC
How I can do? Is it possible or I have to remain with Vista? Oh Damn !
Click to expand...
Click to collapse
Hey, you're not stuck with Vista. Did you follow the recommended threads to install Win7? Watch carefully the drivers. Ah, I think you have to do the installation of Win7 in Vista compatibility mode and as administrator. Can't tell you more, I use XP, remember?
sullivan2002 said:
MY objective is to put GARMIN PC to my HTC SHIFT and use it as navigation and Mp3 device connected to my Car Radio Amplifier.
Click to expand...
Click to collapse
You'll manage that, cannot be that difficult! Once the usb connection done, there should be no further problem.
Good luck!
ok
thanks
I understood about hardspl, I think so to put again if I want to put an original rom and after a cooked one.
For the rest. Now All is ok, also USBTOOL.. works I installed GPSBLUE... and GPSGATE in WM side and W7 side. In WM side I output on Activesync and in W7 side Input on Activesync.. but GARMIN Doesn't reconize GPS.
Ok about the drivers for W7, all went well about installing in Vista Compatibility mode and Administrator mode.
I have installed GARMIN 5...XXX.30 and can see only Bluetooth GPS or USB GPS, I think I must download somewhere a version like 5....xxx.70, I heard somewhere that was written that only this version can reconize GPS from Activesync or TCP/IP
Sullivan2002
sullivan2002 said:
ok
thanks
I understood about hardspl, I think so to put again if I want to put an original rom and after a cooked one.
For the rest. Now All is ok, also USBTOOL.. works I installed GPSBLUE... and GPSGATE in WM side and W7 side. In WM side I output on Activesync and in W7 side Input on Activesync.. but GARMIN Doesn't reconize GPS.
Ok about the drivers for W7, all went well about installing in Vista Compatibility mode and Administrator mode.
I have installed GARMIN 5...XXX.30 and can see only Bluetooth GPS or USB GPS, I think I must download somewhere a version like 5....xxx.70, I heard somewhere that was written that only this version can reconize GPS from Activesync or TCP/IP
Sullivan2002
Click to expand...
Click to collapse
Hi Sullivan2002,
After checking with someone I know, on his HTC Shift there is the following software installed:
- On the WinMob side - PPC GPS Router 2.0.0.0 (HTC 2005) to enable the GPS port and HTC GPS Tool v1.2.1.26 to do the reception.
- On the W7 side there are Franson GPS Gate 2.6, Garmin Mobile PC v 5.00.70g and GMap Catcher.
Unfortunately I can't tell you more, I'm not using Shift with GPS. Maybe in the future.
Anyway, do a search on this forum, I recall there was a thread on Gramin.
Good luck!
ok thanks a lot
I will try
sullivan2002