I want to customize the LED for status of signal (green if available, orange if non signal), for missed calls or missed SMS.
Any have the solution?
Not yet, but I have noticed that there are actually two light 'bars' one on each side of the ear piece, I am looking into it.
Bupahs said:
Not yet, but I have noticed that there are actually two light 'bars' one on each side of the ear piece, I am looking into it.
Click to expand...
Click to collapse
yes sir.
it should be : [light] speaker [light]
Bupahs said:
Not yet, but I have noticed that there are actually two light 'bars' one on each side of the ear piece, I am looking into it.
Click to expand...
Click to collapse
SoCalSpecialist said:
yes sir.
it should be : [light] speaker [light]
Click to expand...
Click to collapse
The right hand 'light' isn't the light you might think
It's a light sensor which measures the light conditions where the keyboard will be turned on when it's too dark...
so it's not a light, but a SENSOR
greetzz
Pietje_1985 said:
The right hand 'light' isn't the light you might think
It's a light sensor which measures the light conditions where the keyboard will be turned on when it's too dark...
so it's not a light, but a SENSOR
greetzz
Click to expand...
Click to collapse
yeah, I figured that out lol, had to get a hold of a spec sheet but its not a light, it is the sensor
Hello, are there some news for the LED?
I own the European Version of the Maple (Snap)
and the indicator LED stops flashing after 10minutes, even if i
have not read my messages/missed calls.
I want the LED to flash until i take care...is there a way?
thnx in advance,
RB
Randel Burton said:
Hello, are there some news for the LED?
I own the European Version of the Maple (Snap)
and the indicator LED stops flashing after 10minutes, even if i
have not read my messages/missed calls.
I want the LED to flash until i take care...is there a way?
thnx in advance,
RB
Click to expand...
Click to collapse
I am working on this as I find time. Can you look in the registry at HKCU/Control Panel/Notifications/Led and tell me what the value of the TimeOut is set at?
Value LED Time out
Can you look in the registry at HKCU/Control Panel/Notifications/Led and tell me what the value of the TimeOut is set at?
In my HTC Snap the Value data is 30, but I don't think my Led is flashing voor 30 minutes.
Is this the right value?
famod said:
Can you look in the registry at HKCU/Control Panel/Notifications/Led and tell me what the value of the TimeOut is set at?
In my HTC Snap the Value data is 30, but I don't think my Led is flashing voor 30 minutes.
Is this the right value?
Click to expand...
Click to collapse
That is the correct value. I am still looking through the registry, but it may be something in a dll which would really be crummy.
Randel Burton said:
Hello, are there some news for the LED?
I own the European Version of the Maple (Snap)
and the indicator LED stops flashing after 10minutes, even if i
have not read my messages/missed calls.
I want the LED to flash until i take care...is there a way?
thnx in advance,
RB
Click to expand...
Click to collapse
Hallo,
i have the same Problem with der HTC Snap Status LED.
Have you found an Solution?
Maloja
cswroe said:
I am working on this as I find time. Can you look in the registry at HKCU/Control Panel/Notifications/Led and tell me what the value of the TimeOut is set at?
Click to expand...
Click to collapse
Very cool..looking forward and wish u lots of free time
My TimeOut value is 30, too.
It seems that the secret may be in allledmgr.dll
I am totally unfamiliar with editing dll files so if someone wants to take a try at it, go ahead. It looks like this file contains the flash rates, colors, etc.
No sooner did I give up and it came to me that what we need is not there rather than change what is there.
If you want the LED to blink until you acknowledge the message/notification you need to add a DWORD entry to the following paths in the registry. The DWORD that you want to add will be named "Duration" (without the quotes) and give it a DWORD Data of "0" (zero without the quotes).
For SMS: HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65B-239C-47a7-9304-0D347F580408}
For Missed Call: HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D660-239C-47a7-9304-0D347F580408}
For Reminders: HKEY_CURRENT_USER\ControlPanel\Notifications\{15F11F90-8A5F-454c-89FC-BA9B7AAB0CAD}
The above work on my device. I do not use the built in VM or Email, so I can not confirm the following two entries so if someone would like to try and let us know, I would greatly appreciate it.
For Email: HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65A-239C-47a7-9304-0D347F580408}
For Voicemail: HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D661-239C-47a7-9304-0D347F580408}
I still believe the secret to the colors reside in the dll posted above.
Hello,
many thanks for your help.
It functions very well.
Greeting
Maloja
LED blinking
No change over here!
Also the suggestion of Ookba to use automatic keylock doesn't make the timeout of blinking any longer.
famod said:
No change over here!
Also the suggestion of Ookba to use automatic keylock doesn't make the timeout of blinking any longer.
Click to expand...
Click to collapse
Interesting. Are you using Ookba's Rom?
I would check to make sure that you are in the right location and that the Value is correct. I will make a file that will do it automatically when I get a chance. The locations are so similar I was putting my values in the wrong location at first.
cswroe said:
Interesting. Are you using Ookba's Rom?
I would check to make sure that you are in the right location and that the Value is correct. I will make a file that will do it automatically when I get a chance. The locations are so similar I was putting my values in the wrong location at first.
Click to expand...
Click to collapse
I'm sorry, on the right place everything is blinking oké. Thanks
cswroe said:
...
If you want the LED to blink until you acknowledge the message/notification you need to add a DWORD entry to the following paths in the registry. ...
Click to expand...
Click to collapse
Thank you mucho!
Works fine on my Euopean (GER) Snap. Finally! THANKS AGAIN!
Somebody know if this works with 6.5, too?
Randel Burton said:
Thank you mucho!
Works fine on my Euopean (GER) Snap. Finally! THANKS AGAIN!
Somebody know if this works with 6.5, too?
Click to expand...
Click to collapse
I am using 6.5 and it works fine.
Related
On friday my trusty MPV M3100 decided to give up the ghost, so as I was in London I decided to look for a new phone and picked up an Touch Diamond 2.
And I have to say; I love it.
Best phone I've had and even the lack of a hardware keyboard hasn't bothered me.
There is only one thing which has caused me some bother; on all my previous phones when an sms/mms has been recieved the screen will turn on for a while to alert me of this, however I can't find a way to do the same thing with the TD2.
The reason I would like this is down to me mostly leaving my phone on silent but in line of sight. The silent factor is because I'm often doing things with headphones on (such as at work) and I'm not going to hear the tone anyways.
So, while the green light is nice and all being able to have the screen turn on as an option would be nice..
As a coder by trade I've been poking around to see what I could do to let me do this myself, however if someone has a better solution or knows of an app which can already do it then I'd appricate it if they could tell me
There is a setting in:
All Settings->Personal->Sounds & Notifications->Notifications
Then select Messaging: New Text Message from the drop down list, and there is an option there "Flash Light For: x Minutes"
This might be what you're looking for?
thanks for the reply, however I'd already found that option and it only effects the green light which flashes when you get a messag; nice and stuble in keeping with the device but not what I'm after
Look for this registry value
HKLM\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent
It should be 1, set it to 0
ah, excellent, thanks
just curious what program you guys are using to edit registry values...
sorry if this is a stupid question, but i'm new to Windows Mobile.. up until the D2 i've always have symbian phones.
I just did a google for "win mobile reg editor" and installed PHM Regedit to do the job.
Although I'm going to write a quick app to let me toggle this particular setting I think (i'll probably post the resulting cab/exe here encased others want it)
I'm using Total Commander (I just started editing the registry). What do you guys use for making a CAB file?
oruam57 said:
Look for this registry value
HKLM\Drivers\BuiltIn\RIL\DisableSMSWakeUpEvent
It should be 1, set it to 0
Click to expand...
Click to collapse
Thank Oruam, great tweak.
I currently have the option selected to display a new sms message on screen as soon as it arrives, is it possible when i hit reply to get the device to go to the touch flow threaded messaging system rather than the WM6.1 default?
Thanks guys!
Is there any way to have it vibrate & play a sound, but not enable the touch screen? The reason I ask is that I dont want the screen to come on while it's in my pocket etc, and things start to get accidentally pressed!
Awesome! Thanks!
ormz said:
There is a setting in:
All Settings->Personal->Sounds & Notifications->Notifications
Then select Messaging: New Text Message from the drop down list, and there is an option there "Flash Light For: x Minutes"
This might be what you're looking for?
Click to expand...
Click to collapse
I'm sorry ormz.
I'm interesting for that option to have flash light blinking when sms/mail arrives, unfortunately I haven't got the option you mentioned into my settings referred to "new SMS".
I've got the original rom installed (italian version).
May I arrange same setting/option into register also if I haven't it on display?
Could someone help me?
lock the device:
"real lock" - press the hang button (the one on the right) until it shows unlock at the bottom left side
stand-by - press the power button only for 1 second and the screen will go off. When receiving a message, the screen stays black. To see menu-s again, press again power button for 1 second
someone could tell me how to make it works with email event?
You guys might check S2U2 found here: http://forum.xda-developers.com/showthread.php?t=527523
ormz said:
There is a setting in:
All Settings->Personal->Sounds & Notifications->Notifications
Then select Messaging: New Text Message from the drop down list, and there is an option there "Flash Light For: x Minutes"
This might be what you're looking for?
Click to expand...
Click to collapse
That option is grayed out. Anyone else?
Rarebreed said:
That option is grayed out. Anyone else?
Click to expand...
Click to collapse
Same here...
i have total commander and i cant find that path... i get //plugins, application, data, connmgr, doc and sett, my doc, program files, temp, trusted, windows.. looked in all the folders and even typed that address.. nothing..
martyzidek said:
i have total commander and i cant find that path... i get //plugins, application, data, connmgr, doc and sett, my doc, program files, temp, trusted, windows.. looked in all the folders and even typed that address.. nothing..
Click to expand...
Click to collapse
What are you looking for? Are you tryting to navigate to the registry through file explorer? If so, you need a reg editor to do that...
You know this is an old thread, right?
yeah i know its a old thread... i had a registor editor.. actually acouple. i found what i was looking for.. just didnt start with hkml.. thanks though for replying..
Hi,
Wonder if someone can give me a quick answer to this problem...basically when I make a call the screen automaticaly turns off after a few seconds until a hardware button is pressed...is there anyway to turn off this feature? Just that I want pocketshield to completely control the way the screen turns on/off during calls? A registry edit perhaps?
Thanks
HD Tweak (http://montecristoff.webs.com/hdtweak.htm) will sort that out for you. It's one of the first options.
hi,
look to this prog,
http://forum.xda-developers.com/showthread.php?t=488991
have fun
I've got HD Tweak but changing the settings for sleep to off doesn't make any difference.
Also have Touch In call tweak - its a good program but would prefer not to use too many programs and if pocketshield can do the same thing I'd prefer that.
I'm using Duttys 6.1 ROM is this anything doing with HD tweak not working? Does anyone know the registry key to change the screen going to sleep on making a call?
Thanks
disable light sensor
Can anyone help with the registry edits to disable the light sensor.
thanks
grantus said:
Can anyone help with the registry edits to disable the light sensor.
thanks
Click to expand...
Click to collapse
Code:
HKCU\ControlPanel\AllLEDMgr\LightSensorPollingEnable
Worked fine, thanks for the help.
egoist6 said:
Code:
HKCU\ControlPanel\AllLEDMgr\LightSensorPollingEnable
Click to expand...
Click to collapse
how do i go to registry edits??
j.o.i.d said:
how do i go to registry edits??
Click to expand...
Click to collapse
Use your registry editor regedit.exe, should be one already on your rom. If not on your apps list try in /windows
egoist6 said:
disable light sensor
Click to expand...
Click to collapse
will this tip affect only while on call?
thx
I use:
Touch_InCall_Screen_Tweak v1.1.2.CAB
When holding the HD vertical the screen is dark en doesn't react to touching.
When you hold your HD horizontal the screen is active and can be used as normal.
This works only when a call is active.
Good luck!
(same advice as rambo12345)
I installed the LED cab but still do not get a light signal when a new e-mail arrived !
What can be the failure ?
Do you set on in Sounds & Notifications Flash light for.. minutes?
It just does not work with hotmail email accounts! In the sticky of this thread.. there are some tweaks to enable led notifications, but it does not apply for "new email"
24. Enable LED Notification Setting in Sound and Notifications
If you want your LED to flash when you have a new message, missed call or voicemail.. well you can't as it is greyed out. However the following registry entries can be modified to enable them or use the cab at end of post. Reset after changes.
New Message:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65B-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
Missed Call:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D660-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
Voice Mail:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D661-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
I too don't get the light flashing when a new email arrives
Even after running the reg fix cab and changing the settings in the Sounds/Notifications tab.
I tick the box to say 'flash light' and set it to 'no limit'. Maybe I should try setting it to 1 hour or something.
Yeah I've got the same settings, flash light and no limit, but nothing happening for email
Has anyone else noticed that the LEO keyboard doesn't have the {} brackets on it. Or have I just not found them?
I accidentally changed the name of the {A877 D65B-239C-47a7-9304-0D347F580408} entry and came to re-add it only to discover I couldn't. Luckily it was added back in for me
I've tried the various tweaks suggested here. I still can't get this to work. I logged this with HTC Support.After first suggesting sending the device into the Service Centre, they are now advising that this is a known issue and will be addressed in a forthcoming ROM update. Not quite sure whether I am totally convinced - if you have time, if might be worth you also logging this issue with them?
I know it's not a major problem - but it should work
chimpsinties said:
Has anyone else noticed that the LEO keyboard doesn't have the {} brackets on it. Or have I just not found them?
Click to expand...
Click to collapse
Tap on numbers key, click 1/2 on the left side of the keyboard to get to 2/2 and voila, the {} are there.....
Bugger, right in front of my eyes. I could swear I was looking right at that screen aswell.
Oh well, back to get my eyes tested I guess
I would be really interested to hear is anyone else has got these notification LED's to work though. Anything I do has no effect it seems.
I can change the notification sound but can't make the LED flash at all
Works fine for messages and calls, not tried it with Email....
Yeah, messages and calls works ok for mine too. it's just the email one that doesn't and it's really starting to grind my gears. I like to be able to see if its even worth turning the phone on before I pick it up with a handy little flashing LED for emails too.
I have mine all enabled, but not seen them yet, do they all flash in the same way as low battery??? could get confusing...
Low battery = red,
message = green
Could you tell us more ?
dazz29 said:
II logged this with HTC Support.After first suggesting sending the device into the Service Centre, they are now advising that this is a known issue and will be addressed in a forthcoming ROM update.
Click to expand...
Click to collapse
Which service center did you talk to ?
Did they really admit it was a known issue ?
I'm having a really bad time with my battery life. Out of the box
it sucks. Did NOT apply any powertweaks yet, just using my device
the same as I did with my touch HD. 8 hours and it's about dead.
In a couple of days, when I'm owning it for 14 days, will aply 1 tweak at a time and see if there's results..
Perhaps it would be possible with nueLed. I used nueLed with the xda orbit. the cab is here in the forum.
Greeting
Slide
somebully said:
Low battery = red,
message = green
Click to expand...
Click to collapse
Thats strange, toinght my battery reached 10% and it started flashing orange.
I then put it on charge, sent myself a txt, and behold, flashing orange?
?
I would be very happy for a solution (Mail LED)
lucid said:
Which service center did you talk to ?
Did they really admit it was a known issue ?
Click to expand...
Click to collapse
I logged it via HTC.com, got a response from 'Richard' from the UK/Ireland Support Desk, advising that this should be addressed in a forthcoming hotfix. Just that, the response had all the hallmarks of a bulk standard response. Still I've no real reason to doubt him.
pirf said:
I would be very happy for a solution (Mail LED)
Click to expand...
Click to collapse
Try this
New Mail Message:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65A-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
Seems easy and looks like it works
Lusaco said:
Try this
New Mail Message:
HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65A-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword: change to 15
Seems easy and looks like it works
Click to expand...
Click to collapse
Too simple, as a matter of fact : it doesn't work...
Hey Guys and Gals,
I have a small question and I hope somebody knows the answer.....
I'm having a Snap ans I was wondering if if could be possible by settings to leave the screen dimmed while getting a text....
usually it brightens up and turns on as soon as you get a message, but I dont want that
Is there somebody who knows, how to disable the screen from being turned on while receiving a message??
Thanks anyway for any reply/feedback
Regards Jeroen
i think that might just be part of the background sms process. i don't believe there is any hidden registry value to change it.
djh816 said:
i think that might just be part of the background sms process. i don't believe there is any hidden registry value to change it.
Click to expand...
Click to collapse
Are u sure? There should be something....I've had a Diamond before and it was possible to change that....
anybody else?
Thanks
Come on...really nobody???
hmm.... never mind.....thanks neway
You could try this reg hack:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:00000001
Click to expand...
Click to collapse
bubble said:
You could try this reg hack:
Click to expand...
Click to collapse
Thanks for your reply! I will report if it works
Regards Jeroen
First of all, excuse me for my english cause im italian.
Do u know if there is a way (like a registry mod) to make the x2 display switched on when a new sms (or mms) arrives?
Thank u.
Already is possible
Just go into Settings -> Personal -> Sounds...
And go to alerts... there you just click on new textmessage and you can choose to turn on light on arrival.
kepeder said:
Just go into Settings -> Personal -> Sounds...
And go to alerts... there you just click on new textmessage and you can choose to turn on light on arrival.
Click to expand...
Click to collapse
display on, not notification lights
rsx19 said:
display on, not notification lights
Click to expand...
Click to collapse
Besides which the notificaton lights don't work properly anyway. Anyone know a reg fix for this?
this is one of the main things a lot of people have been waiting for. sad that theyve not bothered to fix this. the X1 did it fine.
the phone wakes up when theres an incoming call... i wonder if someone good at programming can somehow use that as a template and apply it to sms messaging...
Ive tried so many apps and also tried to set "1", instead of "0", in the key HKLM/Drivers/BuiltIn/RIL/DisableSMSWakeUpEvent (that i think its the key that is modified by applications), but.... nothing happened!
maybe theres more than one registry event that affects it.
Its possible, but.... what are they???