Database Users

Touch Settings OFFICIAL THREAD

making this now this is for Touch Settings updates.
THanks Carlos!

ambush276 said:
making this now this is for Touch Settings updates.
THanks Carlos!
Click to expand...
Click to collapse
Where is the file for the " Touch Settings " ? You should start by attaching the settings file since this will be the main thread for Touch Settings

i posted detailed instructions as to how to get the "Touch Settings" program to work correctly on the Sprint Touch a few days ago. I'll re-post it over in the Vogue forum shortly

utexascg said:
i posted detailed instructions as to how to get the "Touch Settings" program to work correctly on the Sprint Touch a few days ago. I'll re-post it over in the Vogue forum shortly
Click to expand...
Click to collapse
Please don't re-post this information, as I have now built a new version of the program that should work on the Sprint Touch without any special instructions required. It's been tested by Sprint users and seems to be working well so far.
You can download the beta (v1.29d) from www.fatattitude.com/software
For installation instructions please see: http://forum.xda-developers.com/showthread.php?t=324556
Best,
Carlos

Works great on HTC Touch! WooHoo!
Very Nice job. Very Nice, indeed.
Personally, I wanted the photo to launch the HTC Camera Album.lnk the way you can scroll with your finger & zoom, etc.
So, I created the Photos button in MediaHub to be:
\WindowsHTCAlbum.exe
Params: -mode:camera -type:image

when i try and install the settings app i get a error messsage about
"Installation was unsuccessful. The program or settings cannot be installed because it does not have sufficient system permissions"
how do i chang it so i can install and run this.. thanks

whipple16 said:
when i try and install the settings app i get a error messsage about
"Installation was unsuccessful. The program or settings cannot be installed because it does not have sufficient system permissions"
how do i chang it so i can install and run this.. thanks
Click to expand...
Click to collapse
If you look at the post at the top of this page by Carlos, you'll see he says, "For installation instructions please see: http://forum.xda-developers.com/showthread.php?t=324556."
He also gives these suggestions:
- If you're installing to Storage Card, try installing to the Device instead.
- If you still get the error, try resetting your device and installing again - this honestly worked for me!
- Check there is enough free storage space on your device.
- Try a manual installation (zip file coming to first post shortly)
There are many posts about this in other threads, so you should be able to find the info you need.

Carlos,
Any reason to upgrade to 1.29e if d is working well?
Secondly, if we do upgrade - do you have to uninstall first? or can you overwrite the program?
I don't seem to be able to see a changes history. I'll keep looking.

carlos said there is a new touch settings version comming out soon where it will help implement animations and custom icons will show when the cube turns. WOOT. and we wont have to install the updated Exe, it will be updated for us.,.]
THANKS CARLOS!

ambush276 said:
carlos said there is a new touch settings version comming out soon where it will help implement animations and custom icons will show when the cube turns. WOOT. and we wont have to install the updated Exe, it will be updated for us.,.]
THANKS CARLOS!
Click to expand...
Click to collapse
I've been absent for a few days and WOW...things are shaping up! Thanks Carlos! You are awesome! (Enough exclamation points?)

ambush276 said:
making this now this is for Touch Settings updates.
THanks Carlos!
Click to expand...
Click to collapse
I have spent a good deal of time getting my Sprint Touch to display my local weather by using N2A's "patched" HtcHome.dll which points at a server that does support my local weather (unlike the Htc's accuweather server). Now I would like to use 'Touch Settings' to easily customize what apps get launched from my 3x2 app launcher and the media hub buttons, but I'm not sure if I dare do this yet since I haven't seen anyone explain how 'Touch Settings' accomplishes displaying local weather.
Can anyone tell me how it does this? My concern is that it may conflict with the patched home plugin I already have working.

SprintTouchGuy said:
I have spent a good deal of time getting my Sprint Touch to display my local weather by using N2A's "patched" HtcHome.dll which points at a server that does support my local weather (unlike the Htc's accuweather server). Now I would like to use 'Touch Settings' to easily customize what apps get launched from my 3x2 app launcher and the media hub buttons, but I'm not sure if I dare do this yet since I haven't seen anyone explain how 'Touch Settings' accomplishes displaying local weather.
Click to expand...
Click to collapse
Hi SprintTouchGuy
Touch Settings updates the registry keys at \HKLM\Software\HTC\HomePlug\Weather\Settings
I don't think this should change your server settings etc, and it certainly won't change which .dll file your weather is pulled from.
Why not do a registry backup of that key, try out Touch Settings and if there are any problems, just restore your registry? I think you'll be OK with it.

Hi all
I have a new beta of Touch Settings v2.0 that I'd really like a couple of people to test for me, in particular people with Vogues and Touch Duals, especially pp18 and that other kind person who volunteered.
I have posted it in:
http://forum.xda-developers.com/showthread.php?t=324556&page=20
....if you could keep feedback in that thread for now please? Feels like we have too many threads going at once otherwise and gets confusing!
Thanks,
Carlos

carlosp_uk said:
Hi SprintTouchGuy
Touch Settings updates the registry keys at \HKLM\Software\HTC\HomePlug\Weather\Settings
I don't think this should change your server settings etc, and it certainly won't change which .dll file your weather is pulled from.
Why not do a registry backup of that key, try out Touch Settings and if there are any problems, just restore your registry? I think you'll be OK with it.
Click to expand...
Click to collapse
Works great...thanks Carlos!
One thing I noticed would be interested in finding out if other Sprint Touch users are seeing: after updating my "On Demand" app launcher's button to open a different app in the mediahub, the "Demand" in the text "On Demand" is now half cut-off. I assume this text (which I would like to change anyway) is stored in the registry somewhere and is not editable via Touch Settings yet. I can spend some time researching which settings to manually change in the registry, but if you are going to add this feature soon to the app, then I won't spend the time.
Thanks again, regardless...

SprintTouchGuy said:
Works great...thanks Carlos!
I assume this text (which I would like to change anyway) is stored in the registry somewhere and is not editable via Touch Settings yet.
Click to expand...
Click to collapse
Hi SprintTouchGuy
Glad it's working for you! If you run Touch Settings, you should be able to click in the grey box where it says "On Demand" and change the text to anything you like... ...let me know if it doesn't work for any reason.
C

carlosp_uk said:
Hi SprintTouchGuy
Glad it's working for you! If you run Touch Settings, you should be able to click in the grey box where it says "On Demand" and change the text to anything you like... ...let me know if it doesn't work for any reason.
C
Click to expand...
Click to collapse
Thanks Carlos...I can't believe I didn't think to at least try tapping in there! (Oh me of little faith...)
Next minor issue:
I made my bottom mediahub button say "Voice Recorder", and the word "Recorder" wrapped to a second line which is half-way cut off. I see that text wraps on the middle button as well, and although it doesn't get cut off it does look off-center vertically. I don't know if there is any way to adjust the text vertically with the magic that you do, so for now I'll try to come up with one word labels for the buttons to avoid the issue.
I also am curous what parameter to use to get the HtcAlbum.exe to launch the Camera Album to display just videos, like the 2nd-row 3rd button in does in the 9 button app launcher that comes on the 3rd tab of the HTC Home plugin. Does anybody know what I need to supply? I believe there is a mode: option, but when trying "mode:video" it still only comes up displaying pictures, and it does so in portrait view, not in landscape view like it does from the app launcher (which I prefer). My apologies if this has been discussed already...thanks!

carlosp_uk said:
Hi SprintTouchGuy
Glad it's working for you! If you run Touch Settings, you should be able to click in the grey box where it says "On Demand" and change the text to anything you like... ...let me know if it doesn't work for any reason.
C
Click to expand...
Click to collapse
Carlos - this is kind of a QA issue with the interface. Can I make the suggestion that you change the color of that box from gray to something like yellow? The first few times I opened the app I thought it was the typical "grayed out" box -- meaning I couldn't edit it. Whereas when I see a yellow box it grabs my attention and suggests I should be doing something with it...

Disable New SMS Auto Wake Up and Turn On Screen?

Hi,
I've owned the Xperia for a week and it's a great WinMo device. However unlike Touch Pro or Diamond, there's no registry tweak available to turn off the auto wake up on new sms feature.
I found it really annoying. Everytime a new SMS arrived when the phone was in my pocket the screen automatically turned on, and as I was walking my jeans' pocket continuously "touched" on the phone screen and accidentally opened bunches of programs and scroll up and down until it hanged.
It will be perfect to just make sound + vibrate, but keep the screen off, as I could do on Touch Pro.
Anyone knows of such a solution please do help!

I need to bump on that...

hmmmmmmmmmmmmmm
aint advanced config 3.3 working for that?

I was having this problem too... the only thing I changed to attempt to fix this was instead of pressing the power button to sleep the phone before I put it into my pocket, I press and hold the end key so that it locks the phone and dims the screen. The screen eventually turns off and it requires you to unlock the phone when you power it back on. When you receive an SMS or Email, the screen still lights up, but you have to press unlock, then tap unlock to start using it.

Yes, I have the same problem too and hope we can have the option to turn it off so that the screen will not lighted up when there is new sms or call.
Can someone work on this?

The registry key used for the tweak that works on Touch Pro does not exist, which is HKLM\Drivers\BuiltIn\RIL

smaberg said:
aint advanced config 3.3 working for that?
Click to expand...
Click to collapse
That option is for Touch Diamond and Touch Pro only, and it does not show on Xperia when you use Advanced Config. It's obviously related to the registry key mentioned above.

I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1

Has anyone tried this out to see if it works...???
Cheers

SE-Naz said:
Has anyone tried this out to see if it works...???
Cheers
Click to expand...
Click to collapse
I have tried it myself and it works, I don't have to worry that I might press anything on the screen when there is incoming SMS.

Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks

SE-Naz said:
Thanks for getting back to me...
I was having this problem... when in my pcoket and getting tx message and the opt pad going all over the screen... kinda funny...
Im assuming when updating this key will be deleted and have to be put in again???
Thanks
Click to expand...
Click to collapse
Not sure about yours but I do not have this key so I have to create a new one and it is working.

I need to create it...
Does it need to be where the
HKCR
HKCU
HKLM
are???
Cheers
Sorted now and working well...
Thanks again

Put it in HKLM.
However Resco registry give me an error and doesn't create this dword. Very very strange...

chongbh said:
I have found the solution, just need to use any registry editor like the Resco Registry Explorer or the SKTools to edit the registry.
Dont want the device to wake up on new SMS ?
It still notifies you with sound/vibrate/LEDs, but the screen will not turn ON
Just add in the below line into the registry location :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1
Click to expand...
Click to collapse
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.

Just added this feature in my application XperiaTweak!

hutch said:
am i being bold for asking a step by step.
i have total commander and i am in registry\HKLM\
and then.....
thanks for the help.
Click to expand...
Click to collapse
Using your Registry Explorer an go to the below location :
Location in Registry : HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Select "New" D_Word and you will be asked to enter the details :
Top portion just enter : DisableSMSWakeUpEvent
and bottom portion just enter the value : 1
Save it and you should find the details there :
[HK_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"DisableSMSWakeUpEvent"=dword:1

For easier way, you can download the latest Xperia Tweak and it include the option to turn off the screen for any incoming sms.
http://forum.xda-developers.com/showthread.php?t=440035

Confirmed Work!
I can confirm this solution works perfectly! I thought if the value does not exist means the device does not support it. Thanks chongbh!

notification led

does anyone know how to make the notification led stay on for more than 5 mins for example when receiving an sms? I've looked in settings but the option is grayed out.

Yes go to your settings icon, then go down to the right and press and hold the quickmenu at the bottom right, it's called ""menu" all settings" , there's a bunch of legacy settings to be found there including all the notification settings you and I were used too.
Reply greatly appreciated

You need to edit the registry in order to get access to the settings for LED notification. Look in the thread "hints and tips" for the reg settings. Once applied, you can then change the LED notification time under windows settings.

Is there also a way to make the LED flash when you receive emails?

Did you guys read my post at all, there is no need for registry hacks, the menus are already there. You can do everything you used to do in 6.1 or 6.5

lucid yes we read it but the option for how long the led runs for is grayed out so you can't change it in the legacy settings.
anyone know the registry hack needed?

post by mistake

My sincerest excuses. I went to that screen to verify it existed, not to verify it
was customizable.. my bad..
So... where is that registry hack ?

lucid said:
My sincerest excuses. I went to that screen to verify it existed, not to verify it
was customizable.. my bad..
So... where is that registry hack ?
Click to expand...
Click to collapse
Not a problem Now just need the hack ;-)

HKEY_CURRENT_USER\ControlPanel\Notifications\{A877 D65B-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword:0000000F
Credits go to: http://forum.xda-developers.com/showthread.php?t=565290
__________________

instead of 000000F (hexadecimal), 15 (decimal) will also work in programs that request you enter the value in decimal.

Official Rom Update

Hi all
I am kind of new to this, so I hope I have put the thread in the right place. I have searched for some of the answers, but can not find them, or the threads are 100s of pages long and knowing where to look is a nightmare.
I decided to update my phone with the latest official HTC Roms from their website (2.53.405.5 (76952) WWE). Unfortunately there are a few things that I like the old way, and now I am not sure if I can go back to the original Rom that came with the phone.
- I now can not use custom sounds for my message alerts, I have put them with all the others, and made them to be the same file size, mono and all that, and they don't show up. I can use them for ring tones, but not message alerts.
- I used to have the message alert light set to constantly flash until I had read the message, so if I am away from the phone I could tell I have a message. That bit is still there, but it is grayed out so I can't have it.
- When I lock, unlock the phone, go through the menus and go back to the "Today" screen the clock will go from say 10:13, to 09:13, then will roll forward to 10:11 and then the last two minute digits will roll over to 10:12, 10:13 again? Why is this.
- Is there any way of removing the weather from the "Today" screen, it looks very nice, but the phone seems to come to a grinding halt and that added with the time thing mentioned above is also very irritating.
If anyone knows ways around these it would be much appreciated, if not is there a way of returning to the original Rom that the phone came with, I notice the HTC website said it was not possible.
Thanks in advance.

SQueal said:
- I used to have the message alert light set to constantly flash until I had read the message, so if I am away from the phone I could tell I have a message. That bit is still there, but it is grayed out so I can't have it.
Click to expand...
Click to collapse
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65B-239C-47a7-9304-0D347F580408}]
"AvailableOptions"=dword:4000000F
+ SR and then you can change the value
SQueal said:
- When I lock, unlock the phone, go through the menus and go back to the "Today" screen the clock will go from say 10:13, to 09:13, then will roll forward to 10:11 and then the last two minute digits will roll over to 10:12, 10:13 again? Why is this.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=583161

Hi spigot, thanks for the help.
I have installed the cab for the silly rolling animation, and that has sorted that out.
I have installed a program called FdcSoft TaskMgr wm2005_3.1 to alter the registry values, and have found the "AvailableOptions" one, but don't seem to be able to alter it.

SQueal said:
- I now can not use custom sounds for my message alerts, I have put them with all the others, and made them to be the same file size, mono and all that, and they don't show up. I can use them for ring tones, but not message alerts.
Click to expand...
Click to collapse
Drop the sounds you want for messages directly into thw windows folder. they will be available.

Thank you codhunter, it worked .
Not sure why they would change it between roms / versions, it used to go in the tones or whatever it was called with my original one.
Also your changing the value in available options to 15 for the message LED notification worked, couldn't work spigots out above.
Thanks

Glad to be of help
i'm just learning too, SQueal. Stick with the new rom. any problems you have will soon get ironed out with the helpful guys on here!!!

SQueal: Try to use TotalCommander with it's plugin registry editor. I did it many times without any problem.
To remove weather from today tab look here: http://forum.xda-developers.com/showthread.php?t=656240

how can I enter the registry with totalCommander?

You must download the plugin registry editor, using Total commander's settlings.

georgeono said:
how can I enter the registry with totalCommander?
Click to expand...
Click to collapse
You don't need any plugins. Registry editor is part of total commander. If you press "\" button in uppert right corner (in total commander), you'll get to root part and the first folder is called "\\Plugins", there you can find FTP, LAN and registry editor plugins.

Has anyone else noticed how much smaller the sms text message is? You have the ability to change the text size for the ones you read, and the one in with the screen alignment, but the text still seems really small.
Is there a way of doing this in the registry as well?

Vibration when typing a text

On my old Nokia 5800 when i typed any kind of text (especially SMS) the cellphone vibrated. In HTC HD2 i'm not able to find any option that enables this kind of functionality.
Is there something similar to this functionality in the HD2?
Thanks in advance from Argentina,
Christian.

If you have sense turned on scroll all the way to the end (settings) then hit personalise, then vibration and turn it on

you can, because mine does it..but i cant find for the life of me where the option is. sorry. ill keep looking.

Demon_man said:
If you have sense turned on scroll all the way to the end (settings) then hit personalise, then vibration and turn it on
Click to expand...
Click to collapse
i looked everywhere but there

Get a Registry editor
HKLM - Software - HTC - ezsip
add a DWORD key names "VibrationEnabled" without the speech marks. and set it to 1 for vibration or 0 for without.
I hope this is helpful cos i accidently renamed the Software folder to "d" and it wont change back! o well, excuse to flash

And... is it possible to create a folder to save sent sms?
Best regards!