I have done many searches on this topic all over the Blackstone forum and have not found any solution to my problem. I have found a few people that have an error about the camera not initializing or something but that is not my problem.
Soon after I upgraded to WM 6.5 I noticed that my camera would sometimes quit and I would have to soft reset the device to get it working again. This happened more and more often. It got to the point where the camera would not even try to start.
I have tried several different roms and nothing is helping. Since updating to different roms the camera button in the camera tab in TF3D doesn't even show up. All I get is the album. It acts like the camera isn't even there. It does show up in the program menu. If I activate the camera under the programs menu I get nothing or just get taken back to the home page and nothing happens. Depends on the rom.
I found a few threads where people seem to have the same problem I do but usually after three or four posts and no results they just seem to end.
I have also tried installing some of the other camera cab programs. Topaz, Rhodium, Blackstone etc...
Any help would be appreciated.
One last thing. I also switched back to WM 6.1 and still nothing. The only thing I have yet to try is either redo the HSPL or go back to the original stock SPL
---Update---
After three rom updates and many, many, many searches, I found the solution. Using the advanced config tool cab and changing one of the camera settings Encode photos in portrait mode to no the camera has come back to life. I did the soft reset and hit the camera button and nothing happened but a little screen flash and the window's working icon in the middle started then stopped. That has not happened in a while. I hit the button again and it delayed and started and then quit. I tried it one more time and it came on and was able to take a picture. Reminds me of trying to start a cold engine. Prime it then try to turn it over, prime it a little more then maybe some coughing and finally on the third prime. Presto it starts. Very happy again.
i am having the same problem
can you help me plz
what is advanced config tool cab you used
pardon me my english not that good but what are the steps you did in simple language plz
my phone has WM6.1 and standard rom 1.14.415.2 build 32434 wwe
thanks in advanced
x5-rwk said:
I have done many searches on this topic all over the Blackstone forum and have not found any solution to my problem. I have found a few people that have an error about the camera not initializing or something but that is not my problem.
....
---Update---
After three rom updates and many, many, many searches, I found the solution. Using the advanced config tool cab and changing one of the camera settings Encode photos in portrait mode to no the camera has come back to life. I did the soft reset and hit the camera button and nothing happened but a little screen flash and the window's working icon in the middle started then stopped. That has not happened in a while. I hit the button again and it delayed and started and then quit. I tried it one more time and it came on and was able to take a picture. Reminds me of trying to start a cold engine. Prime it then try to turn it over, prime it a little more then maybe some coughing and finally on the third prime. Presto it starts. Very happy again.
Click to expand...
Click to collapse
I did the not save in portrait mode thing and it worked for me. Thanks. I've spent many hours on this. Great!
It didnt work!
I tried just as you said with the "advance config tool" abd the problem persist.
Any idea?
I think it is hardware probelm. Initially it works with some software tinkering (actual steps vary with different devices, infact may be be coincidental / immaterial in help) and becomes harder and harder as time passes and ulimately fails even on stock ROM/SPL.
Hi all. I've got the same problem. Nothing helps. Maybe i need just to overwrite drivers, instead of installing camera soft?? May anyone send me camera dll files?
Related
i installed this so called hot fix from HTC site and guess what?
THE RESULT IS A HUGE PROBLEM - THE CAMERA DOESN'T WORK ANYMORE!
when i try to launch the camera application i receive this message: "Camera is not a valid Pocket PC application"
can anyone confirm that or i am the only one who get tricked (again) by HTC's brilliant software designers?
i installed the slider fix and i had the well known dialer bug. now i installed this and i ended with a not working camera, despide the fact that this fix should enhance the functionality of the device
why didn't i buy the omnia? the guys from samsung released FIRMWARE UPDATES every few weeks, updates that realy improve the Omnia (i.e. the battery life is now around 5 days comparing to 1 day in first firmware release).
the specialist from HTC manage only to launch "fixes" of few Kb that can only destroy your phone.
if there is anybody who can fix again tha HTC's fix i would be greatfully asa long as i don't want to hard reset my device
thanks a lot!
Works ok for me. What ROM are you using?
realy?
ROM 1.14.479.3 (25874) WWE
RADIO 1.09.24.14
PROTOCOL 52.49a.25.26U
the fix works for me too, rom 1.13 ITA
just what exactly is this supposed to fix exactly??
you can find out here
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
no problem on my HD too.
oooops!!!
it seems that i am the only one with this problem
any ideeas?
thank you in advance!
You probably don't want to know that mine still works also (ROM 1.14.405.3 (22273) WWE.
I expect by now, you will have downloaded the hotfix again and tried to reinstall.
noris08 said:
oooops!!!
it seems that i am the only one with this problem
any ideeas?
thank you in advance!
Click to expand...
Click to collapse
unistall the fix.. or hard reset? :/
i am more and more convinced that i am the only one with this problem
uninstaling doesn't fix
hard reset - am i trying to avoid that as long as i can
still no other ideeas?
My device become kind of slow after installing it. The first time i started the camera it took a while to initialise and the menu button was missing.
Will test further and report back.
Try finding the hotfix via registry and deleting it from there.
maybe has nothing to do with this hotfix, but my weather is now completely blank: no cities, no forecast, nothing: only the wallpaper. And strange softkeys: "5-days" (left) and "menu" (right). And pressing them does nothing
Also installed on mine and no problems at all.
noris08 said:
i am more and more convinced that i am the only one with this problem
uninstaling doesn't fix
hard reset - am i trying to avoid that as long as i can
still no other ideeas?
Click to expand...
Click to collapse
when i first load the camera i get no options arrow, have to backspace then open again. Rom 1.19, I'm going to try downloading from the HK website, see if its a different version...
installed the version from the hong kong site even tho it appeared to be the same version. options tab now appears but after about 3 seconds. I'm wondering if that was always the case but i didn't notice?
Hi,
I have installed, not problem so far. However, could any one post any sample photo taken before and after the hotfix installed? I didn't see any difference. Thank you
mine after hotfix install,appeared 2 white pixels in camera.(i didnt have them before)
There would be no change in picture quality...
from HTC website:
When you use the Camera function to take a picture in a dim environment with super fine quality, sometimes the image will display extraneous (noise) pixels in the viewfinder mode. It’s not a mechanical (LCD) fault but only an intermittent display problem in view finder mode. It does not have any impact on the picture quality or other display functions. If you encounter this problem, please download this hot fix to enhance the virtual viewfinder mode.
unfortunately nothig i tryed solved the problem and i had to hard reset the device
i reinstalled the fix before any other programs and it seems to work
i belive the fix somehow conflicted with an existing application but i could not manage to find ou wich of them
now i am working hard to resinstall everything. i hope that will not crash again when i will be at 90% (knock on wood)
Hello Everyone,
I made a search, but I could find only one reference to something similar to me...
I keep having the message "Camera Initialisation Error..." (in french, that is), whenever I try to use the camera after a long time...
To correct this, one thing that work but that is hassle is to power on the phone, take out the SD card, that turn on again, and there it works... miracle. Then I can put back the SD card, and it keeps working... till soemthing happen (I don't know what, and why) and it all starts again "Camera Initialisation Error...".
Has any of you got this?
It does not matter where I tell the camera to save the picture.
I did the camera and SD card hotfixes.
It does not look like hardware
So, any clue?
Thanks in advance...
I have the exact same problem. My camera works again with power on and off. annoying!
Leephi said:
I have the exact same problem. My camera works again with power on and off. annoying!
Click to expand...
Click to collapse
same here. nobody knows why it can be?
vdelab said:
Hello Everyone,
I made a search, but I could find only one reference to something similar to me...
I keep having the message "Camera Initialisation Error..." (in french, that is), whenever I try to use the camera after a long time...
To correct this, one thing that work but that is hassle is to power on the phone, take out the SD card, that turn on again, and there it works... miracle. Then I can put back the SD card, and it keeps working... till soemthing happen (I don't know what, and why) and it all starts again "Camera Initialisation Error...".
Has any of you got this?
It does not matter where I tell the camera to save the picture.
I did the camera and SD card hotfixes.
It does not look like hardware
So, any clue?
Thanks in advance...
Click to expand...
Click to collapse
I may have been the person who posted the original post that you saw, and to be honest you should have just added to that instead of opening a new thread.
http://forum.xda-developers.com/showthread.php?t=609366
Anyway, no one seems to know what the problem is, but yes doing a simple restart addresses it. Could be a bit embarrassing though LOL...hold on a minute...its reloading...on the Windows splash screen...wont be long...keep smiling...!
Have any of you applied any registry tweaks either manually or via BSB Tweaks? I noticed the issue happening after applying the tweaks, but when reverting the settings back the issue still cropped up anyway.
A mystery me thinks.
Well, im in here too, i had this issue with thee official german ROM 1.48 too, but not with the 1.43 T-Mobile ROM i had before 1.48. Now im on 1.61, but the error was still there after setting up and tweaking my device.
After a hard reset the camera worked, every single time, so it must have something to do with the things i changed on my device. So i made my way through everything i installed/tweaked and reversed it.
To get to my point: The error disappeared after my last action: Uninstalling Skype Mobile and changing the picture saving location in the camera options from SD card to main memory. 2 days later...no error. I have set it back to SD card meanwhile and another day without the message passed. So i think its gone, but im not completely sure why. Maybe thats helpful for you, good luck!
Hello,
sorry about doubling the thread....
If some moderator pass by, please, you can append this thread to the one quoted by Morpheus.
Anayway, I did the check in the registry, so let's see what it give.
Notice that in my case, a soft reset wasn't enough. I really had to do the sd card removal thing...
Also, I did use swype before (but I uninstalled it a whuile ago due to other freeze issues and to the landscape bug as well). Actually, I miss it as I think it was a great SIP. Now I use shapewriter, to try... I don't know if it could lead to the same camera problem....
Anyway, I'll try to re-initialize the camera and see how long it lasts with the change I made in the registry. Only in P2 I had a different entry... instead of 48 I had 20000 -ish.... weird...
Thanks
Vdl
dont we have a chance to reinstall just the device.exe or camera drivers?.
thank u
i get this error when i use swype, everything works until i use the swype then the cam wont work... i really like the swype so i hope someone finds a solution
i've gotten this pop up...but it only happened after i tried to install qik on my phone...
hello everyone
i am since 1 week a proud owner of fhis device. And please understand, i choose this device after allot of research en review analyses. I love it,the way it looks, feels etc. However after 1 week of testing and intensive using i came across many small issues that do create some irritation and i wanted to know what to do to fix them. That is if there are fixes available besides resetting the phone everytime they occur.
My first problem is the lock screen. If my phone is locked for a while and i want to unlock it, there is somtimes a good chance that my phone gets stuck and all i can do is resetting it
by removing the battery. My second issue is, that somtimes my opera browser stops rotating to landscape mode. Fixing this requires a phone reboot. My final issue which is the biggest, when i use the youtube app allot. After a while of using the volume control bugs out. Wheb you change volumes during the video, the phone freezes a tiny bit and then a windows error message appears.
What i would like to know if i can fix these problems somehow or if anyone else has simillar experiece as me.
Finally, i would like to know if it is possible to play youtube movies on the standard webbrowser, opera. i got skyfire installed, but it seems very slow and buggy.
Thanks in advance for your time
Hi Hydrad,
Sorry to hear you are having problems. I didn't have any of these problems initially so I can't help you there. It would help however to know what your ROM is, and if you ever updated your ROM.
The ROM my HD2 came with was messy and there were a lot of bugs. I installed Miri's 6.5.x rom and i have no problems whatsoever.
If you haven't done a ROM update before, don't worry it is not that hard, just write here and Id be glad to help.
All the best,
sh.
Hydrad said:
hello everyone
i am since 1 week a proud owner of fhis device. And please understand, i choose this device after allot of research en review analyses. I love it,the way it looks, feels etc. However after 1 week of testing and intensive using i came across many small issues that do create some irritation and i wanted to know what to do to fix them. That is if there are fixes available besides resetting the phone everytime they occur.
My first problem is the lock screen. If my phone is locked for a while and i want to unlock it, there is somtimes a good chance that my phone gets stuck and all i can do is resetting it
by removing the battery. My second issue is, that somtimes my opera browser stops rotating to landscape mode. Fixing this requires a phone reboot. My final issue which is the biggest, when i use the youtube app allot. After a while of using the volume control bugs out. Wheb you change volumes during the video, the phone freezes a tiny bit and then a windows error message appears.
What i would like to know if i can fix these problems somehow or if anyone else has simillar experiece as me.
Finally, i would like to know if it is possible to play youtube movies on the standard webbrowser, opera. i got skyfire installed, but it seems very slow and buggy.
Thanks in advance for your time
Click to expand...
Click to collapse
Follow the link in my signature for Flashing LEO Roms for noobs. Install HardSPL and then pick a rom from many available and flash it via activesync (usb). I would recommend Duttys WWE Rom in in sig to start withbut there are plenty of others that are worthy of flashing.
Flashing a custom rom will fix your freezing issues, fix your opera roatation problem and most include a youtube app to play yourtube videos directly rather than having to go through opera.
If you need anymore help then just shout as theres always people willing to lend there ear and share their knowledge.
Mark.
hi all. thank you for the replies.
i forgot to mention that i updated my rom already to 1.66. My htc is also not branded. I will follow the links you gave me. ty
So Im VERY new to this, first Windows Mobile phone. And this is my first post.
Right after receiving my HD2, I was disappointed with my purchase. I loved my Android powered G1, and fell in love with HTC. But when I got my HD2, the texting was terrible, and my phone kept freezing. After talking with a few friends about this, I was referred to this site.
From there, I did some research, and have learned a little bit. I decided to upgrade the ROM to the stock T-Mobile 2.13, through a link I found on this site. At the same time, I loved the interface of the CHT and CHTE, so I loaded those. Also, at the recommendation of Cookie's thread, I loaded Chainfire HD2 3D Driver Patch V2.0.
Well everything feels better, Ive started using Swype, and I havent had any freezing issues. I couldnt be happier...
But I recently notice (I dont do many phone calls, or talking. Im more web, email, and text) my incoming call screen isnt popping up. My phone will ring, I pull the phone out, and I see my home screen, and it is unlocked, like it should be when an incoming call comes through. I start tapping on the screen, and where I tap, icons/buttons start popping up. The "Mute" button, the "Answer/Ignore" bar, and SOMETIMES the caller's ID pic (if Im lucky enough for it to be someone who has a pic).
Now, this doesnt happen ALWAYS, but it does happen here and there. Ive also noticed, that the function that blacks/locks the screen when in call, against your face is running funny.
Does anyone know if this is related to my ROM? The 3D Driver Patch? CHT? Has anyone had anything similar???
I DID do a search, but only in this TMOus HD2 General sub forum. Should I be looking else where? Sorry for such a novel. I just felt that I should provide any possibly necessary info, since Im kind of clueless to this phone modifying world.
TIA.
Hmm...if it were me I'd definitely start with uninstalling that video driver and see if that changes the behavior.
Also, are you using the stock lockscreen or do you have CHT lockscreen enabled via CHTE? If you do have CHT's enabled, then next you might want to switch it off and see if it helps.
I don't know for sure that either of those will resolve that, but that's where I'd start troubleshooting.
After your new rom finished flashing, did you perform a manual hard reset (as recommended by most chefs)?
I've found that there is more chance of the rom being unstable if you dont.
(flashes dont always take first time, no clue why, but i'd estimate about 1 in 10 flashes just isn't stable, yet the next flash with the same rom is stable, , , I've also noted similar results when installing an OS on my PC, , , sometimes it just doesnt wanna take properly.)
theidealone said:
So Im VERY new to this, first Windows Mobile phone. And this is my first post.
Right after receiving my HD2, I was disappointed with my purchase. I loved my Android powered G1, and fell in love with HTC. But when I got my HD2, the texting was terrible, and my phone kept freezing. After talking with a few friends about this, I was referred to this site.
From there, I did some research, and have learned a little bit. I decided to upgrade the ROM to the stock T-Mobile 2.13, through a link I found on this site. At the same time, I loved the interface of the CHT and CHTE, so I loaded those. Also, at the recommendation of Cookie's thread, I loaded Chainfire HD2 3D Driver Patch V2.0.
Well everything feels better, Ive started using Swype, and I havent had any freezing issues. I couldnt be happier...
But I recently notice (I dont do many phone calls, or talking. Im more web, email, and text) my incoming call screen isnt popping up. My phone will ring, I pull the phone out, and I see my home screen, and it is unlocked, like it should be when an incoming call comes through. I start tapping on the screen, and where I tap, icons/buttons start popping up. The "Mute" button, the "Answer/Ignore" bar, and SOMETIMES the caller's ID pic (if Im lucky enough for it to be someone who has a pic).
Now, this doesnt happen ALWAYS, but it does happen here and there. Ive also noticed, that the function that blacks/locks the screen when in call, against your face is running funny.
Does anyone know if this is related to my ROM? The 3D Driver Patch? CHT? Has anyone had anything similar???
I DID do a search, but only in this TMOus HD2 General sub forum. Should I be looking else where? Sorry for such a novel. I just felt that I should provide any possibly necessary info, since Im kind of clueless to this phone modifying world.
TIA.
Click to expand...
Click to collapse
I read somewhere that the "unleaked official ROM" caused more problems than it was worth. I got the 2.13 ROM on the leaked version before it was made official and it has been working great since. I read that they made more changes and then made it official and that it was causing phones to be bricked and most phones ended up worse than they where before the the upgrade. The only "negative" thing i experienced was the screen sensitivity but it appears that the cab featured in the sticky at the top of the post fixed that!? Kinda strange If all else fails Factory Reset and try again. I always like to take a baseline reading. When my phone began acting screwy I would restore and run it stock for a few days to see if problems persisted...then after about three or four days slowly begin installing things...
Thanks for the responses! I will start with sirphunkee's suggestions. As I was typing, I started thinking the Driver Patch was a good possibility. Also, I have noticed that the phone doesnt just "sleep" the screen when I put the phone to my face, it locks. Im assuming this is something to do with CHTE's lock, because as sirphunkee mentioned, I am using the CHTE lock, instead of the stock.
Im going to start there, and see what happens.
Also, I did NOT do a manual hard reset. How would I go about doing so (yes, Im a HUGE noob. More of a car guy)? Im hoping I wont need to do this, as Im assuming I will need to restore all of my contacts, reorganize them, and reset everything else, as if the phone were new out of the box... Correct? But in case that is necessary, how do I do so?
As far as the leaked or official version... I couldnt find it on T-Mobile's site. I read a thread here, where it had been there then removed, due to people having issues with the download. I then was searching Swype or something, same forum, and found another thread, where someone had a link to the download through T-Mobile. Kinda hard to explain, but I will see if I can find the link, and the thread.
Thanks again guys! I really appreciate it. And thanks for taking it easy on me.
I just tried to post the links. I found them in my browser History. But because I have such a new account, I cant post.
theidealone said:
I just tried to post the links. I found them in my browser History. But because I have such a new account, I cant post.
Click to expand...
Click to collapse
Thanks for the effort though, you'll be able to put up links after just a few more posts (it's listed in the forum rules...hint, hint). Also, toreone already threw up a new thread in this section with that link for everybody, so don't sweat that
EDIT: oops, missed the rest of your questions there. The hard-reset is exactly what you said...resets the phone to factory-fresh condition. Yes, contacts will have to be reapplied, but sorting really shouldn't be an issue depending on your method of backing up and restoring them. I highly recommend using the built-in Microsoft Myphone utility for that (and it's wise to let it back them up regularly too, just in case, I just have mine set to do it each night while it's charging).
You can perform a hard-reset a couple of ways:
1. on your settings tab, hit "menu", then "all settings", then "system". You'll find an icon in there titled "clear storage". Run that, use 1234 as the code, and it will do its deed.
2. with the phone powered off, hold both the vol up and down buttons at the same time, and then press the end/power button to turn it back on, then it will take you into the same hard-reset process as the first method.
Acer900
Don't know if you're still even active in these forums but just wanted to say a huge thank-you for your ROM and as I can't add a message in the developers forums yet, I wanted to add my thanks here!
It is the only custom rom I can currently DL for the S200 but it's absolutely amazing and its like being given a whole new phone to play with. Huge respect for you and your work and I hope you might not be entirely ready to give up on the phone just yet...
I do have one problem however. I flashed your rom from a "virgin" 3.003c firmware and enabled EZinput for full landscape mode. So far so good. everything worked until I went in to the camera - half screen viewfinder displayed, no icons at screen edge and (after 30-40 seconds) the display locked and no hard or soft keys were able to get me out of camera mode. I couldn't even get it to power off, I had to pull the battery and restart. I read in the developers forum that the camera is a source of problems and at one point brainmaster had posted a cab file to reinstall the acer default camera so I installed it and restarted the phone but when I went into the camera again, the exact same thing happened.
Other posts seem to suggest it may be an HTC keyboard/camera conflict but presumably many folk on custom roms got that camera to work to some degree.
Any suggestions you can offer? I don't need it to work perfectly. I don't take that many photos on the phone but I do use it occassionally and I can't use this as a daily rom if locks up every time I accidentally start the camera.
Thanks again. Really appreciate all of the hard work you've put in and this rom does really make an old device sing very sweetly once again.....
BelfastLad
BelfastLad said:
Acer900
Don't know if you're still even active in these forums but just wanted to say a huge thank-you for your ROM and as I can't add a message in the developers forums yet, I wanted to add my thanks here!
It is the only custom rom I can currently DL for the S200 but it's absolutely amazing and its like being given a whole new phone to play with. Huge respect for you and your work and I hope you might not be entirely ready to give up on the phone just yet...
I do have one problem however. I flashed your rom from a "virgin" 3.003c firmware and enabled EZinput for full landscape mode. So far so good. everything worked until I went in to the camera - half screen viewfinder displayed, no icons at screen edge and (after 30-40 seconds) the display locked and no hard or soft keys were able to get me out of camera mode. I couldn't even get it to power off, I had to pull the battery and restart. I read in the developers forum that the camera is a source of problems and at one point brainmaster had posted a cab file to reinstall the acer default camera so I installed it and restarted the phone but when I went into the camera again, the exact same thing happened.
Other posts seem to suggest it may be an HTC keyboard/camera conflict but presumably many folk on custom roms got that camera to work to some degree.
Any suggestions you can offer? I don't need it to work perfectly. I don't take that many photos on the phone but I do use it occassionally and I can't use this as a daily rom if locks up every time I accidentally start the camera.
Thanks again. Really appreciate all of the hard work you've put in and this rom does really make an old device sing very sweetly once again.....
BelfastLad
Click to expand...
Click to collapse
First,
I'm glad that the rom is working for you, Thanks!
second,
I'm no longer actively building after my PC's Hd mysteriously crashed and I lost everything before that I was in the process of upgrading the rom to v.1.3.5
and trying to find a solution to the problem you're experiencing now.
It has nothing to do with the keyboard/camera relationship.
The Full Rotating phone canvas I used was developed for HD2 leo, not acerS200
meaning, it uses components native to the HD2 leo in this case, it's camera,video,full screen viewer etc... our problem w/S200 is that the camera,video,picture viewer etc.. being acer components,not HTC Leo's,
function using their own specs,dimensions, and most importantly, it's own resolutions and rotation based on those size resolutions.
I was experimenting with the phone canvas to see if there was a way to separate our acer camera,vid., but lost my HD... as a matter of fact,
I'm using a V.1.3.5 beta in my phone now that has parts of different phone canvas versions i.e. Raphael,Laurentius, Parts of caller ID fixes from laurentius too. But my testing was cut short and I haven't the time or desire to start all over again, sorry
So to finally answer your question, You must " uncheck" "EZinput" under G sensor settings for the camera and video to function properly.
Maybe one day I'll replace my PC's HD and try to cook again but I'm thinking
that it may be easier to buy an "acer stream"('cause I like acer) and see what
that's like.
Thanks
Thanks for the reply.
I really appreciate all the effort that went in to making something as good as this but appreciate that sometimes with technology we all just need to "move on".
I'll look forward to seeing your name (and efforts) pop up elsewhere in the forums.
Cheers.