Related
Hi,
I am using 20070511_LVSW_Trinity_WM6_v2.0.0.5 however , the quickgps isn't in there. Can anyone give me a link where I can download it or extract me that CAB file out of an EXT. ROM of the P3300 ?
Thanks for the help, I appreciate that.
Cheers
Micman
Any particular reason why you want it? It is designed for the P3300 ratehr than the P3600.
All our tests on 4WM seem to suggest it makes little or no difference at all to the TTFF times, and uses GPRS data in the process
again, placebo effect...
@NeilM
Well pretty easy, it takes about 5 minutes when I start TomTom to catch the satellites.
Unless you have another solution for me ?
Thanks
Micman
Yes you could put a GPS quickfix sticker on your P3600. Works just like those reception improvement / bad waves blocking stickers...
Micman said:
@NeilM
Well pretty easy, it takes about 5 minutes when I start TomTom to catch the satellites.
Unless you have another solution for me ?
Thanks
Micman
Click to expand...
Click to collapse
That is a little slow by current standards, but not bad. You do need to make sure you have a clear view of the sky when obtaining first fix. Subsequent fixes ought to be quicker.
As I said above, QuickGPS makes little difference, and is also designed for the P3300 which uses a SirfStar GPS chipset, rather than the P3600 which uses the Qualcomm chipset.
if you guys think that the quickfix programs has no effect on the A-GPS chip found on the trinity, then why do you think that HTC is going to include the same program on the upcoming HTC Kaiser which seems to use the same A-GPS chip ?
Correct me if I'm wrong, but isn't A-GPS network dependant? What if mobile provider doesn't offer such services. Anyways, I find Tomtom takes a little long for TTF. I use GPSTest to acquire fix, then load up TomTom. Works for me, hopefully helps u.
Micman said:
Hi,
I am using 20070511_LVSW_Trinity_WM6_v2.0.0.5 however , the quickgps isn't in there. Can anyone give me a link where I can download it or extract me that CAB file out of an EXT. ROM of the P3300 ?
Thanks for the help, I appreciate that.
Cheers
Micman
Click to expand...
Click to collapse
HTC has improved time to first fix with WM6. Before I installed the official SEA WM6 ROM, it always took about 4 minutes, but now it's always under 2. I don't know what they did but there is obviously something (new radio?) that improves TFF.
mo7al said:
if you guys think that the quickfix programs has no effect on the A-GPS chip found on the trinity, then why do you think that HTC is going to include the same program on the upcoming HTC Kaiser which seems to use the same A-GPS chip ?
Click to expand...
Click to collapse
While I believe the GPS chip of Kaiser is a Qualcomm, there's still a chance, and rumors btw, that it's actually a SiRF-III. I know it's weired - but no one is able to confirm anything on the Kaiser - even for those guys who already got one. The only thing for sure thus far is that existing SiRF-III utilities do NOT run on Kaiser - but still it can't proof that it's a Qualcomm or it's definitely not a SiRF.
BTW, mind you that the chip on the Kaiser is different from that on Trinity. So we don't have a conclusion here yet. And you know, HTC has the past history of disabling Trinity's GPS chip in its earliest roms releases - that's make speculations difficult.
Merely giving the program the same name of "quickgps" doesn't mean anything either. If it's a SiRF, then it's something natural; but if it's a Qualcomm, I bet they would still call it quickgps instead of something like "qualcomm quickgps" for sake of simplicity.
GPS of Kaiser is a GPSOne Qualcomm I've looked into Kaiser registry. That GPS is inside MSM7200 Chip of Kaiser.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\GPS Intermediate Driver\Drivers\GPSOnePort]
"InterfaceType"="COMM"
"FriendlyName"="QualComm GpsOne Card, version 0.0"
"CommPort"="COM1:"
http://www.cdmatech.com/products/msm7200_chipset_solution.jsp
I think there are some little chance to port QuickGPS application from kaiser to trinity
For Guybrush
Hello,
Look at this documentation of the chipset qualcomm 6275 on p3600 :
http://www.cdmatech.com/products/msm6275_chipset_solution.jsp
gpsOne® position-location assisted-GPS (A-GPS) solution
So may be HTC have not delivered the driver for Gps One !!!
The question of "the p3600 have à Gps-one capability"
The Answer is YES !!!
Private69.
@++++
I know... theorically should be the same... but it's not sure that GPS Driver of Kaiser seem different from the one inside p3600... but I think there some little chances to make quick gps working also in p3600. I tried to port Quick GPS application, drivers, registry settings from Kaiser ROM but when I launch Quick GPS Application, it gaves me an error like "Cannot create empty document" and I haven't understand the cause but maybe i missed something and someone more expert than me can have a better luck doing it
So after all we might have a chance to import QuickGPS from the Kaiser to the Trinity effectively....
Let's work hard guys
Guybrush said:
I know... theorically should be the same... but it's not sure that GPS Driver of Kaiser seem different from the one inside p3600... but I think there some little chances to make quick gps working also in p3600. I tried to port Quick GPS application, drivers, registry settings from Kaiser ROM but when I launch Quick GPS Application, it gaves me an error like "Cannot create empty document" and I haven't understand the cause but maybe i missed something and someone more expert than me can have a better luck doing it
Click to expand...
Click to collapse
guy, you can post the cab, as 1st approach to quickgps, it can help someone to work on it
This thread might help: http://forum.xda-developers.com/showthread.php?t=324222
This works in my trinity with Italian udk 4.0 ROM.
It Wants HTC Homeplug and a little traslation.
Guybrush can do you do?
It's like the cab i did, just I missed one file, now I'll try
I remember thaht in my original ROM this cab doesn't work. It gives the same error that have you.
Now with this rom works.
I don't understund what's the problem.
I Haven't tried with your ROM.
For cicciocant
Hello,
Ok quickGPS work on your trinity can you export your quickGPS registry and post it.
Thanks.
Private69.
@+++
http://www.youtube.com/v/j5568ZTrD5A
Looks fishy, smells fishy...
It's problably a charmer...
*_* sorry for my poor english
Maybe That was a video????
and he just moves his finger????
He Cheating>>>
Hi twolf,
That's possible? WM6 in Magician?
Why do you think that's fake?
I believe its a charmer and not a magician, so I said it was fake only the part that he points out that it IS a magician...
Its my 1st post on xda, but, sadly I have bad news for the ones that thought that it was a magician running wm6.
I've manage to talk with gyurobenjamin (the guy on youtube), and after a while we told me that it is a charmer not a magician, the only thing that we did was updating his rom.
Sadly for the magician users, he thought that qtek s100 was the correct name for his tmobile compact II.
Well, we can only hope that someone, someday, is willing to cook a very slim rom for us.
Regards
as you see on video the device on it is working so slooow. no like as our magicians. also it has windows and OK buttons. magician had calendar and contacts icon on buttons.
its charmer.
No Magician this trick
****, WM6.1 on a Magician would be simply a winner!
what software is this using?
twolf said:
http://www.youtube.com/v/j5568ZTrD5A
Looks fishy, smells fishy...
It's problably a charmer...
Click to expand...
Click to collapse
hi there.i followed the link you posted here for the video and i browse some of them(vids) as well and found this. http://www.youtube.com/watch?v=i8MyysjqlTk. could you tell me what software is being used?thanks a million!
krame03 said:
hi there.i followed the link you posted here for the video and i browse some of them(vids) as well and found this. http://www.youtube.com/watch?v=i8MyysjqlTk. could you tell me what software is being used?thanks a million!
Click to expand...
Click to collapse
The software used is PointUI (http://pointui.com/)
It is available for WM5/6 AND WM2003
Works great on my Magician.
Just download the Beta, Unzip, copy to device and run.
madsurfer1 said:
Well, we can only hope that someone, someday, is willing to cook a very slim rom for us.
Click to expand...
Click to collapse
A slim ROM would be easy to cook. The fact there is a WM6.1 Pro for the HTC Tornado is proof 64MB of ROM is enough.
Unfortunately, it's not the cooking that's a problem, it's the bootloader. And then after that, the kernel is a problem.
I wonder if anything can be used from the Apache? It uses a similar type of bootloader to the Magician. Perhaps someone very skilled in ARM assembly could use parts of the Apache bootloader on the Magician and possibly modify the kernel (nk.exe).
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks
Can anyone extract it from OMNIA and create a cab file? I really am not good at it. From a dump Rom I see a MotionSensor.exe which is the settings app for it. I don't know whre the dll is or what dll I am looking for.
It would be great for us to have it other devices.
here is the link of the dumped rom:
Samsung OMNIA dump ROM
I suppose ur device has motion sensor hardware
defcomg said:
I suppose ur device has motion sensor hardware
Click to expand...
Click to collapse
others say that the camera is the motion sensor itself. ive read it somewhere which is for WM7.
As far as I know, The camera CAN be used as a motion/accelerometer detector. But it uses too much battery to be practical, which is why I think it hasn't been done yet.
And as far as the Omnia, Diamond, Dream, And iPhone go. They use an accelerometer much like the ones you would find in a Wii Controller, As does the proposed features of Windows Mobile 7.
dielo said:
Can anyone extract it from OMNIA and create a cab file? I really am not good at it. From a dump Rom I see a MotionSensor.exe which is the settings app for it. I don't know whre the dll is or what dll I am looking for.
It would be great for us to have it other devices.
here is the link of the dumped rom:
Samsung OMNIA dump ROM
Click to expand...
Click to collapse
This link is broken is there another way to find this dump?
using camera for accelerometer would be funny...
1) 100% of your resources would go to the application that decodes the video stream and translates it as movement... would also be interesting how it would know ORIENTATION (what? see a person and see where his feet touch, triangulate -even that would be impossible without distance data- and that find "down"?)
2) it would work only where there is light?
hahahaha okok
...in any case I don't even get what the original request is...
Motion Sensor is HARDWARE not software to extract and use.
Hi everyone,
I was wondering if the chefs could put the HTC Footprints into their roms?
I've noticed it that Footprint is only available on the newest HTC Cruise.
Altough most chefs uses the ROMS from Diamond2 (now) which doesn't have Footprints, do you think it would be possible to implement it into D2 Rom?
PS: i'm not sure to put it into the ROM dev-section, sorry if it's in the wrong section.
the upcoming release from SE, R3A, is going to feature its own geo-tagging facility through the camera application
mkouk said:
the upcoming release from SE, R3A, is going to feature its own geo-tagging facility through the camera application
Click to expand...
Click to collapse
but it seems there are some problems with the geotagging & i always get "no info" in my information page of the picture.
Does it give the city name or just the coordinates?
Can sombody explain what "footsteps" are?
I asking this myselfe all the time.
mkouk said:
the upcoming release from SE, R3A, is going to feature its own geo-tagging facility through the camera application
Click to expand...
Click to collapse
I think he meant "Footprints", and it's a lot more feature than R3A camera apps that just has geo-tagging.
I had Footprints built-in in my 2.x and 3.x series.
jackleung said:
I think he meant "Footprints", and it's a lot more feature than R3A camera apps that just has geo-tagging.
I had Footprints built-in in my 2.x and 3.x series.
Click to expand...
Click to collapse
Yeah sorry xD
I mean Footprints
Oh I didn't know that ur rom has it
I'll give ur rom a try, but not now. Just flashed it to Itje V5.061
offtopic: Jack, you're from Hong Kong or USA, because you have the flag of HK..Just wondering
****head said:
Yeah sorry xD
I mean Footprints
Oh I didn't know that ur rom has it
I'll give ur rom a try, but not now. Just flashed it to Itje V5.061
offtopic: Jack, you're from Hong Kong or USA, because you have the flag of HK..Just wondering
Click to expand...
Click to collapse
Please fix yr topic then in case anyone would search for the same question.
I was born and raised in Hong Kong but living in USA now.
jackleung said:
Please fix yr topic then in case anyone would search for the same question.
I was born and raised in Hong Kong but living in USA now.
Click to expand...
Click to collapse
Wow really? great
Chinese too, but born & still living in Europe
Hi all,
i'm new in Xperia world and this forum has been very helpfull for me...
I got manila TFL3D installed on my X1.
I tried to install footprint (not very clever, actually) without HD camera installed.
That does not work at all but the problem is not here : i've lost the text in a menu when i open a picture in TFL3D : the options/actions menu at bottom right is empty.
It opens the menu, i can click an action but i can't see the text ! (hard to select an anction without reading anything...)
I uninstalled footprint but it did not come back.... (and yes i've soft reset)
What can I do ? Except uninstall/reinstall manila ?
Thanks,
(sorry for my english i'm French...)
I've cabbed footprints. it's on the forum, you need a rom with one of the HTC cameras in it..
fards said:
I've cabbed footprints. it's on the forum, you need a rom with one of the HTC cameras in it..
Click to expand...
Click to collapse
You referring to this? Nothing seems to happen after I tap on 'Menu > New' though. Did a soft reset, copied the HtcCameraUtility.dll to my Windows folder and checked my registry settings, and even tried installing gtrab's R3A CAMERA but still doesn't work. Something else I missed out? Or does it only work on Touch-IT? Btw, I'm on stock R3A.
ipporek said:
You referring to this? Nothing seems to happen after I tap on 'Menu > New' though. Did a soft reset, copied the HtcCameraUtility.dll to my Windows folder and checked my registry settings, and even tried installing gtrab's R3A CAMERA but still doesn't work. Something else I missed out? Or does it only work on Touch-IT? Btw, I'm on stock R3A.
Click to expand...
Click to collapse
yup. i've only tried it on roms with a htc camera built in, so I've no idea if it will work with stock and a cab.
using that cab, you dont need to copy htccamerautility as a working one is included, but it would be best to install the htc camera first..
what you can check is that the camera.exe in windows is not the SE one.. The SE is a dummy file to trigger CameraRunner.exe
[edit]
I've just reread what you posted... the R3a camera WILL NOT work, it needs HTC CAMERA..
fards said:
yup. i've only tried it on roms with a htc camera built in, so I've no idea if it will work with stock and a cab.
using that cab, you dont need to copy htccamerautility as a working one is included, but it would be best to install the htc camera first..
what you can check is that the camera.exe in windows is not the SE one.. The SE is a dummy file to trigger CameraRunner.exe
[edit]
I've just reread what you posted... the R3a camera WILL NOT work, it needs HTC CAMERA..
Click to expand...
Click to collapse
Is it just any HTC camera? Or only those for Rhodium/Topaz? And if convenient, could you point me to where I could find it? Tried searching but couldn't seem to find any for Rhodium/Topaz.
By the way, I saw you mention in another thread that you use both the SE and HTC camera. You mean that's possible?
Edit: Found 2 versions of the Topaz camera, but after installing, got the error message below when I tried running the 'HTC Camera' program that appeared:
'The file 'Camera' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.'
Edit2: Btw, I did try installing the rhodium MHub.cab and also checked the 3 registry entries but still no use.
And by the way, I suppose the Rhodium camera not working is also why I can't launch the camera from the Photos and Videos tab in TF3D (using Daran's TF3DB3).
fards said:
I've cabbed footprints. it's on the forum, you need a rom with one of the HTC cameras in it..
Click to expand...
Click to collapse
Thanks for your answer.
I got a stock rom for the moment. Maybe i'll change it in a few weeks, with everything working ! (hopfully)
The reason the HTC camera doesn't work is that it needs lots of support files, It's just easier to use one cooked into a rom..
If you really want core stuff from HTC devices to work on the X1 then use a cooked rom.. It's simpler, more efficient and you know it'll work...
fards said:
The reason the HTC camera doesn't work is that it needs lots of support files, It's just easier to use one cooked into a rom..
If you really want core stuff from HTC devices to work on the X1 then use a cooked rom.. It's simpler, more efficient and you know it'll work...
Click to expand...
Click to collapse
Can I assume that you used a cooked ROM (so as to have the HTC camera) and then separately installed the SE camera?
Anyway I've been contemplating switching to a cooked ROM for a while .Just worried that switching back to stock (for servicing purposes) would not be possible. Btw, can I assume Footprints will work on Touch-IT?
ipporek said:
Can I assume that you used a cooked ROM (so as to have the HTC camera) and then separately installed the SE camera?
Click to expand...
Click to collapse
I believed both Itje and mine have BOTH camera apps built-in. And if you really dare to read previous post in this thread. I even have footprint built-in as well and you don't have to do anything any all
Anyway I've been contemplating switching to a cooked ROM for a while .Just worried that switching back to stock (for servicing purposes) would not be possible.
Click to expand...
Click to collapse
Please search. There is a thread for this in rom section already.
jackleung said:
I believed both Itje and mine have BOTH camera apps built-in. And if you really dare to read previous post in this thread. I even have footprint built-in as well and you don't have to do anything any all
Please search. There is a thread for this in rom section already.
Click to expand...
Click to collapse
Ya. Saw your post about Footprints in your ROM. And uh, ya, I did kind of see a mention of restoring to stock ROM, just that still had some things I still wasn't too sure about it (like what 'stock radio' is and where to get it). But guess I'd probably just give it a try.