Related
Hi !
I installed the GPS-enabled ROM from the HTC Homepage - and TomTom 6 for Pocket PC - not the Trial Version from the HTC Homepage.
but when configuring the GPS receiver - I can not find any build-in device..
It`s only "other GPS receiver", Bluetooth-GPS receiver and so on.
could you please help me ???
thx
hans
Read other threads...
There are a lot of threads about GPS and TomTom
go to the TomTom site and look for the PocketPC upgrade that is specific to the HTC devices. it will upgrade TomTom so you can select the internal GPS receiver. for now, you can also use the "Other NMEA" device.
maps ?
Hi !
thanks !
I installed my TomTom6 Version - and downloaded the Plugin for the HTC device.
But I had to install this TomTomHome Software in order to install this plugin.
but when I want to configure TomTom it tells me that I could download
one map for free..
BUT I want to use my existing "Western Europe" maps.
I copied them to "My Documents" - but it doesn`t recognise it...
Could you please tell me how I could re-use me TomTom6 maps.
thx
hans
Put the map folder back in the memory card root
Hi,
Is there anybody being succesfull in transferring the I-GO 2008 navigation software into Diamond Touch? I heard that it was possible and worked but I could not figure out how. I found in forums how to transfer the software to my PDA with Win mobile 5, but the same process was not succesfull with Diamond. My Rom is 1.93.479.3. The app would not finnish instalation and cannot be run after (it just would not start, though it appears in PROGRAMMS as if installed... Any advice?
Thanks.
Do you know why there is a search button in the upper bar?
http://forum.xda-developers.com/showthread.php?t=403325
ChiefmasterB said:
Do you know why there is a search button in the upper bar?
http://forum.xda-developers.com/showthread.php?t=403325
Click to expand...
Click to collapse
Now I found the button:_) Thanks mate, I was lost when I googled out a couple of non-related results.
I will read it
Thanx
I have it working on mine, email me for help.
[email protected]
I have installed Igo8 in my Diamond and it works. Then installation in device, you must copy igo8.exe from device to internal storage/igo8/ and start the application with it. excuse me for my english
delete anything within the [folders] key in sys.txt
UK Postcodes?
has anyone got postcodes working on iGo 8?
i have iGo running with UK maps, but can only search for places by address.
Cheers,
running iGo 8 on my XDA Diamond with original O2 Rom....
running fine with 3d terrain and buildings enabled....
GPS working without problem...search works by adress, poi...everything
only TTS suxx right now....
good ...small maps....(found no tomtom7 map for germany and the netherlands..so i used the 1GB version of western europe)
igo uses only ~360MB for maps (ger+ned) buildings poi speedcams etc....NIIICE
mugglesquop said:
has anyone got postcodes working on iGo 8?
i have iGo running with UK maps, but can only search for places by address.
Cheers,
Click to expand...
Click to collapse
you type postcodes in the CITY box mate
i've got full 7 digit postcodes in uk, BUT not for 2008.4 map only 2008.1
Igo8 will do 7 digit postcode
to get the 7 digit postcode search working in IGO8 do the following
1: download the postcode enabled map from here --> http://rapidshare.com/files/166750423/UnitedKingdom7PPC.rar.
2: after putting it in the map folder in your igo8.content/maps folder start the app
3: when running click find and in the box UNDER United kingdom, the one where you normally put the city put your post code, but (and this is important) you MUST put a space in it, eg DL17 2HR . if you try and put DL172HR you will only get as far as DL172 then it will jump to the 5 digit address.
I have this running on a Touch HD with full postcode search and it works a treat with 3D landscapes, looks very nice.
Have fun
IGO R8.3
majo551 said:
Hi,
Is there anybody being succesfull in transferring the I-GO 2008 navigation software into Diamond Touch? I heard that it was possible and worked but I could not figure out how. I found in forums how to transfer the software to my PDA with Win mobile 5, but the same process was not succesfull with Diamond. My Rom is 1.93.479.3. The app would not finnish instalation and cannot be run after (it just would not start, though it appears in PROGRAMMS as if installed... Any advice?
Thanks.
Click to expand...
Click to collapse
Hi,
I've installed and using the IGO R8.3 with my Touch diamond device. Use this sys.txt file Should work.
I have onCourse, and it's working but voice doesn't seem to work at all.
Want to try iGo. However, don't know where to get the required cabs/files, etc. Any help?
Hello everybody,
first of all, this is not a post about warez, since I am talking about new western europe map v. 7.25 I have just bought from tomtom.com.
Well, before I had installed on my Cruise tomtom navigator 7 that I got from this post (http://forum.xda-developers.com/showthread.php?t=401679), and everything seemed to work fine: I could download the free test map, and also free voices. Then I wanted to buy and install the new western europe (v. 7.25) map, that is available from a few days on tomtom.com. To this purpose I created an account, registerd my device as a TomTom navigator 7 one, and then went to map shop and bought the map. Then I downloaded and installed tomtom home 2.3, and I tried to install the map on my device using it, I can see the map I bought but I am getting an error message that says that the map is not compatible with my device.
Can anybody help me?
Sorry for error!
Remember no warez here, edit your post.
Michelasso said:
Hello everybody,
first of all, this is not a post about warez, since I am talking about new western europe map v. 7.25 I have just bought from tomtom.com.
Well, before I had installed on my Cruise tomtom navigator 7 that I got from this post (http://forum.xda-developers.com/showthread.php?t=401679), and everything seemed to work fine: I could download the free test map, and also free voices. Then I wanted to buy and install the new western europe (v. 7.25) map, that is available from a few days on tomtom.com. To this purpose I created an account, registerd my device as a TomTom navigator 7 one, and then went to map shop and bought the map. Then I downloaded and installed tomtom home 2.3, and I tried to install the map on my device using it, I can see the map I bought but I am getting an error message that says that the map is not compatible with my device.
Can anybody help me?
Click to expand...
Click to collapse
Have you tried copying the card to your sd card? Just to the root folder?
As far as I know there might be still a problem with activating the card.
rgds
AndiHelldriver said:
Have you tried copying the card to your sd card? Just to the root folder?
As far as I know there might be still a problem with activating the card.
rgds
Click to expand...
Click to collapse
I cannot just download the map, the only way tomtom allows you to download it is using tomtom home, which says that my device is not compatible, so I have nothing to copy anywhere..
I don't know but is there a update or new version to make Tomtom, Tomtom 7.25?
Hey mate, sorry to hear that you have problems. I would like to know if there is a way to get this working myself before I buy a ver7 map myself.
I know there has been someone else getting this to work in this forum. Maybe you an set the device to something else for the SD Card in TomTom Home. If it doesn't work while the card is in the phone maybe try it in a card reader. Think that should work. Let me know if you have success
Cheers
I'm running TomTom 7.450 on my Polaris, and I'm using the Map of Norway,
Finland, Sweden and Denmark v7.20 without problems. The maps need to be purchased and installed via TomTom Home 2 (Set your device av TomTom 720).
pananza said:
I'm running TomTom 7.450 on my Polaris, and I'm using the Map of Norway,
Finland, Sweden and Denmark v7.20 without problems. The maps need to be purchased and installed via TomTom Home 2 (Set your device av TomTom 720).
Click to expand...
Click to collapse
These maps are not anymore available for TomTom 720, at least in Italian site now if you register as 720 you can only buy 8.10 maps that are not compatible with tomtom7, at least to my knowledge. If you register as a tomtom 7 device, as for example a vodafone touch diamond, you can buy 7.25 maps, as I have done, but then you get the "impossible to install on this device" error if you try to download them.
may be it is not for One
Not completely sure but maps for One devices are not always compatile with normal PPC tomtom version.
I had this kind of problem with Tomtom 6 - bought maps for tomtom 6 One and those were incompatible.
After talking to Tomtom support they changed my subscription.
Unfortunately I never used tomtomv7 but instead got iGo8.
Hello everybody,
I have problems with installing TomTom in the Version above... could somebody be so glad to give me a manual?
Thanks,
Sebastian
The manual is available directly at Tomtom.
Just ask them (do not forget to provide them your serial number ).
you can use TomTom HOME to download and install maps :
you can download a version of TomTom HOME from the tomtom website
HOME 2.5 for Windows For all GO, ONE, XL, RIDER and NAVIGATOR 7 devices
HOME 1.6 for NAVIGATOR 6
Any other ideas? Isn't there any software downloadable to manage it by myself?
Fact of the matter is that tomtom just has not intergrated the HD in there system.
You will just have to wait untill the new home version comes out.
Hi, did a search and nothing came up.
But just wondering where can i get the TOMTOM navigation software that works with the TP2 please??
also are there any sites specially for TP2/windows mobile apps??
thanks
AFAIK the Tomtom software is free, you only pay for the maps, but I could be wrong. I'm using 7.915.9196 which is VGA and works fine
I don't think there is any TP2 specific software on the market but there is loads of WM6 stuff
http://www.pocketpcfreeware.com/en/index.php is a place to start and handango
stunno said:
I'm using 7.915.9196 which is VGA and works fine
Click to expand...
Click to collapse
same here, no problems at all. already tookm a trip, relied on it, and trip went perfect
TomTom is shipped with some devices. But it's not freeware!
Beware you don't start talking warez here
TomTom just made TomTom 7 available on their website for PocketPC's.
TomTom works just fine on the Rhodium probably.
no GPS LAG?
TOM TOM software is not free. and will not currently work with TP2. well the home software dont work. So i cant get the map i purchased. And they wont refund as i was not using a licensed version of software so definitely not free and not officially working
purple8 said:
TOM TOM software is not free. and will not currently work with TP2. well the home software dont work. So i cant get the map i purchased. And they wont refund as i was not using a licensed version of software so definitely not free and not officially working
Click to expand...
Click to collapse
tom tom navigator works purfect on the TP2, have it on mine
Hi
I Have tomtom 7.450 installed on my tp2 and its working well for me.
yes but are they legal versions and work with the TOMTOm home
I had version 7.910.9185 which didn't install.
I have now installed 7.915.9196 but it is asking to activate the map and wants an activation code.
So I went to ttcode.com to get one and it needs the product code. I can't find the product code anywhere, tomtom.com myorders doesn't mention one and tomtom home just shows the map version.
As far as I can make out from tomtom's help version ttn7 onwards don't use product codes.
So how do I get the activation code?
Contact TomTom about that
tomtom again
Hey guys,
iam new here and from germany.
Last week i got my new TP2 (branded by T-Mobile, now called "MDA Vario V")
i tried to install following versions:
Mod Edit: NO MENTION OF WAREZ PERMITTED
so,
if i install the programm on my "phone-storage" i got the warning "BTTrayCE is not a valiued application..."
if i install it on my sd-card i got NO warnings.
but in every versions i got the problem that the software do not find my extractet maps. I searched for a long time and tried different folders, and now its 11:00PM and i dont have any nerves left
i hope somebody can help me and gimme a detailed instructure how to get my tomtom running.
so far,
mypTx
TomTom questions always walk a thin line with regards to legality. No discussion of maps will be permitted.
Opps sorry never mind
There should be a ttnavigator.bif file on the root of the storage card which you can open up in notepad and find the code in there...I think.
if you have live services like traffic and speed cameras then 7.915 is useless as you cannot enable traffic (bug). There is also a definate lag on the GPS side of things compared to my TYTNII. Tomtom at present do not officially support the TP2, although when i phoned them they were more than happy to assist. TTHome is not worth bothering with till they release a version that is compatible with it. I kept on getting errors about device id not matching even though you select to change it and TomTom had reset my account. Gave up in the end and have copied speed cameras manually and traffic is now working.
Managed to get Tomtom 6 working!
Hi,
Having just bought a Touch Pro 2 sim free - loving the device and just about got it set up the way I like it.
You can indeed install Tomtom 6 on it, but BEFORE you do I highly recommend you install a utility called WVGAFIX3. What it does is allow you to change the resolution on your TP2.
Change it to VGA (640x480), then install and run TomTom. It's a bit of a pain toggling between resolutions at the moment, but once a WVGA version of tomtom is released then problem solved.
Got the radio working thanks to the CAB on here, and the 1% batt driver!
robsamuel2k8 said:
Hi,
Having just bought a Touch Pro 2 sim free - loving the device and just about got it set up the way I like it.
You can indeed install Tomtom 6 on it, but BEFORE you do I highly recommend you install a utility called WVGAFIX3. What it does is allow you to change the resolution on your TP2.
Change it to VGA (640x480), then install and run TomTom. It's a bit of a pain toggling between resolutions at the moment, but once a WVGA version of tomtom is released then problem solved.
Got the radio working thanks to the CAB on here, and the 1% batt driver!
Click to expand...
Click to collapse
Why TT6? TT7.915.916 runs great on my Rhodium. No hassle with resolutions or anything.
Hi,
I tried to install TT Nav. 7 on my TP2, but it doesn't seem to work. I get a message dat TT7 is not compatible with my device. How did you guys got it to work?
Dear all,
It is posible to route Tomtom sounds to bluetooth headset or radio cd bt enabled as handsfree (as a phone call, only hear Tomtom when needed and till then carry on listening music)?
Thanks.