Thought I'd start this thread for those who are looking to speed up there wm6.5 phone as well as increase their phones battery performance. Thanks to stanip over at Rhodium Development for heads up on this jem of a program that works great on my Kaiser. This is a must have on your phone. I noticed so many chefs in rom development try their hardest to achieve maximum stability and speed and some are very sucessful. I was skeptical about this program until I installed and applied settings recommended and WOW I swear my phone is SUPER FAST and RESPONSIVE with little effect on battery life. In fact I've noticed longer battery life with Battery hack setting found in this program. I have attached the cab for this program along with settings provided to make your phone FLY try it out you'll see!
Note: Upon installation you will note that the taskbar will turn a greenish and orange like color upon 1st soft reset. Don't worry. Just soft reset once or twice and this will dissappear. Settings and Cab below:
1) Under processes: select highest for all. Select Refresh and select Monitor.
The best part here is the "Add" function which allows you to pick applications you want to add and speed up. Once you add, select highest speed as other processes. The improvement is really noticeable.
2) Memory: similiar to other clean Ram type of utilities. No setting required. Just hit Free.
3) Video speed: I select fastest and disable window animations.
4) Storage performance: Just select all to tick.
5) Tools: I only need battery hack (to last longer).
6) Benchmark & reset to default - as needed.
Install to device not Storage Card
Unregistered version only allows for 1 full system setting. I currently have File System Cache set to maximum and boy does this thing respond.
Wow!!
It sounds a great superb tool!
Any comments from members already tested?
Thanks,
intereting. will have to try this out. thanks.
sweet. hope that this will help my kaiser.
Installed on my 64mb Universal does not even run the app
Now I can´t uninstall.....
EDIT: Uninstalled took like 10 min
Perhaps my memory is very slow...
Any other experiences to share?
1) Under processes: select highest for all. Select Refresh and select Monitor. - wont this increase battery consumption?
oldsap said:
1) Under processes: select highest for all. Select Refresh and select Monitor. - wont this increase battery consumption?
Click to expand...
Click to collapse
I havent noted any battery consumption. In fact ive noted low battery consumption due to the battery hack settings. my battery seems to stay charged longer now but i guess it all depends on your usage. note on unregistered version you can only select highest for 1 setting. I increased file cache to full and thats it until i buy full.
orb3000 said:
Installed on my 64mb Universal does not even run the app
Now I can´t uninstall.....
EDIT: Uninstalled took like 10 min
Perhaps my memory is very slow...
Any other experiences to share?
Click to expand...
Click to collapse
dont know why it took so long to uninstall. on my kaiser i just go to settings system and remove programs and take installed programs off. also dont know if this works on universal but it should cause its built for ppc. google speedbooster 2.0 teksoft and there more info on this fine program.
okI tried it. running it now. it seems to be loading the windows folder much faster and I have quite a few files in it.
I mostly focused on device.exe.
so far the keyboard has not been misstyping. (although I still cant spell woth a damn.
thanks for the heads up on the program... now if I can only figure out how to make these setings permanent in my rom...
Thank´s for the SpeedBooster...
I install the version V2.0.0.10 because of Tyra
I have one HTC Touch Elf 0100 P3450 (64/128Mb) & Onyx 5.0.1 WM6.5, and i take less of minute to install SpeedBooster... I set all like the #1 and the soft give me this BenchMark:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After the TIP on #11
I can see some quick effects , much more faster, the memory RAM is lower ( usually was 70% ur 72% and now is @ 60% )...
I say Cooooool to this app for now...
Thank's
can this work on a cdma device? like the htc touch?
this program is very interesting, great find.
S.V.I said:
okI tried it. running it now. it seems to be loading the windows folder much faster and I have quite a few files in it.
I mostly focused on device.exe.
so far the keyboard has not been misstyping. (although I still cant spell woth a damn.
thanks for the heads up on the program... now if I can only figure out how to make these setings permanent in my rom...
Click to expand...
Click to collapse
Cool. Ive been trying to let a few of the cooks in Kaiser Rom threads about this program noone seems to be paying it any mind so i thought I would just start a thread. This app is a must have. regarding all the settings I think you have to purchase the full program for like $14 to be able to have all, but the way my phone is moving now who needs the others. A little secret if you have advanced configuration 3.3 go into performance settings and enable file system cache set file system cache size to 8mb and file system filter cache to 131072 sectors , Glyph Cache to 128kb hit done phone will do soft reset and be ready to anchor your phone down this baby will fly.no effect on battery either. report back tell me what you think.
vblbros said:
can this work on a cdma device? like the htc touch?
this program is very interesting, great find.
Click to expand...
Click to collapse
Yep it should I read where it currently has some peoples touchpro2 running like its on steroids. Give it a shot you shouldnt be dissappointed.
my old htc blue angel scored higher than my touch pro, things like this makes me want to nuke htc's headquarters FFS -____________________-
One question: i have set it NOT TO SHOW the battery bar. But, after each soft reset, the bar keeps reappearing. Anyone knows a registry setting to disable it for good?
Thank's, Paul
This little program is indeed a wonder.
I've used it on several models, and allways with good results, since early versions.
Best practice tip, from one of the authors of this app:
I suggest you add higher priority to gwes.exe and shell32.exe, and to 2-3 of your favorite programs that are not running fast enough.
Click to expand...
Click to collapse
And you can get a free license, check this topic on Teksoft's forum. You can also get more info browsing their forum.
Anyhow, a little explanation, on how it works: it does not overclock your processor. It just assigns more processor time (cycles?), to the running apps that were tweaked to a higher priority, thus making them run faster.
I'm always a little sceptical when it comes to "speedboosters", but this one really works.
I pointed it to
poutlook.exe
gwes.exe
shell32.exe
and applied the rest of the settings as the topicstarter. It gives a very noticeble speedboost in Titanium in WM6.5. I work with the Romeos 6.5 ROM.
paulyluca said:
One question: i have set it NOT TO SHOW the battery bar. But, after each soft reset, the bar keeps reappearing. Anyone knows a registry setting to disable it for good?
Thank's, Paul
Click to expand...
Click to collapse
install it manually...not by uc may fix the problem
I noticed in the title it says for wm6.5. Does this work with 6.1 as well. Seems as though it would if people with the Touch Pro2 are praising this app. I know I would like to give it a try on my TP2.
+1
Could you please tell if this app only works on wm 6.5. ? or also on 6.1
Also, is it supposed to work on every ppc, such as Diamond I, Touch HD, etc...
Thanks
?
MOD EDIT:
No warez on this forum.
Related
Thanks to Tom Gech (the author) for posting this on the overclocking thread. Omapclockplus is a small executable addon to omapclock.exe. It is free, the register dialog means register to omapclock.exe to add a notification in the notification queue.
I thought this was worthy of its own thread as many seem to have problems with contiuous overclocking using the notification method and the current instablility of the omapscalar method or those that don't use smartskey.
Omapclockplus basically does the same as with the notification queue method but uses an executable to set up a notification to resume overclocking after standby. FINALLY NO NEED FOR THE MEMAID METHOD TO SETUP NOTIFICATION.
I put together a cab that will install all the necessary executables and links for continuous overclocking. After install start the omapclockplus program choose overclocking speed (test speed stability using omapclock consule first) and register i.e. it registers the program to omapclock.exe. Soft reset and your done. There is a slight delay if you manually put into standby - you have to wait 10 secs before you resume - that is the only small glitch but should not be a problem when using the device normally. The cab also installs omapclock.exe so there is no other installation needed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The source of the program is here http://www.nicque.com/PQz/
Copy cab to device through activesync, click on the cab through file explorer on the device, register omapclockplus at 180 and then soft reset. (IF OMAPCLOCKPLUS DOES NOT REGISTER AFTER THIS TRY POWER OFF THEN POWER ON RATHER THAN SOFT RESET) Then test for stable speed through omapclock consule before registering at higher speed. DO NOT UNZIP THE CAB - IT INSTALLS FOR YOU.
N.B. If you have a previous version of omapclock/omapscaler installed on your device please uninstall it and soft reset device. Some people are having problems with the install of omapclockplus because of residual links etc.. on their device. Please ensure all other links/notifications etc.. are removed before install of this cab.
N.B.B. Remember to uninstall omapclockplus you must click unregister through the omapclockplus program before uninstalling the cab. (otherwise the notification will remain in the queue)
EDIT New version with adjustable clock speed available v0.0.4
NOTE: FIND A STABLE SPEED TO OVERCLOCK USING OMAPCLOCK BEFORE REGISTERING WITH OMAPCLOCKPLUS! - As some are having problems finding a safe overclock speed (causes a lockup/looping of device) - I suggest registering at 180 then slowing increasing speed through omapclock consule to find a safe speed before registering at that speed.
CAB ONLY WORKS ON WWE ROMS
For those with non-wwe roms and others having difficulty installing with the cab - use manual installation zip and instructions here http://www.nicque.com/PQz/OmapClockPlus.htm
To remove the omapclock notification if you forget to unregister omapclockplus before uninstalling or if you want to check the notification is present use omapclockremover - unzip and copy exe to device.
For Wm Smartphone devices that have an omap processor - typhoon etc.... use the manual installation zip but substitute omapclockplus from Omapclockplus_wm_smartphone.zip.
thx man. Great add on and nice cab made installation a lot easier
Hi meschle,
Thank you very much.
so, OmapClockPlus is compiled for WM2005 and the app's dialog is fitted on QVGA screen.
if need to compile for WM2003. I will do it (but I can't test cause I only have HTC Wizard.)
cheers,
tom
Gech said:
Hi meschle,
Thank you very much.
so, OmapClockPlus is compiled for WM2005 and the app's dialog is fitted on QVGA screen.
if need to compile for WM2003. I will do it (but I can't test cause I only have HTC Wizard.)
cheers,
tom
Click to expand...
Click to collapse
No problem tom - one question on my device it did not overclock on startup only on resume from standby, so I added a 240Mhz startup link. On your device does it overclock from startup i.e. after soft reset of the device?
Hi meschle,
On my device, it looks same as like yours.
chy,
tom
Hello
I wanted to know if you would use this in tandem with the Scalar program that's also out or if you would use one (which one?) over the other.
jose_v said:
Hello
I wanted to know if you would use this in tandem with the Scalar program that's also out or if you would use one (which one?) over the other.
Click to expand...
Click to collapse
If you want constant overclocking say at 240Mhz then use omapclockplus or omapclock and the notification method to resume from standby. If you want to alter omapclock speed to go with the load on the device then use the scalar program.
overclocking
hi mark.sorry about those questions but i hope you'll have patiance with me:
1.is overclocking(the cab you made) good with the tmobile mda(us)?
2. will doing so void my warrenty?
3.does it drain the battery much faster?
4.does the extra speed make a big diffarence?
5. do i need to unlock my device to do overclocking or i can used tmobile brand device?
thank you so much!
Re: overclocking
ericizzy1 said:
hi mark.sorry about those questions but i hope you'll have patiance with me:
1.is overclocking(the cab you made) good with the tmobile mda(us)?
2. will doing so void my warrenty?
3.does it drain the battery much faster?
4.does the extra speed make a big diffarence?
thank you so much!
Click to expand...
Click to collapse
1. Yes it should be fine with your device
2. Yes it will void warranty but most of us have had no problems at all with it running at 240Mhz.
3. Only small increase of battery drain at 240Mhz
4. Extra speed does make a real difference - could not go back to the standard speed.
Re: overclocking
meschle said:
ericizzy1 said:
hi mark.sorry about those questions but i hope you'll have patiance with me:
1.is overclocking(the cab you made) good with the tmobile mda(us)?
2. will doing so void my warrenty?
3.does it drain the battery much faster?
4.does the extra speed make a big diffarence?
thank you so much!
Click to expand...
Click to collapse
1. Yes it should fine with your device
2. Yes it will void warranty but most of us have had no problems at all with it running at 240Mhz.
3. Only small increase of battery drain at 240Mhz
4. Extra speed does make a real difference - could not go back to the standard speed.
Click to expand...
Click to collapse
5. do i need to unlock my device to do overclocking or i can used tmobile brand device?
It works perfectly for me. I saw a large increase in speed, both perceived and benchmarked.
Whenever I tried OMPScaler, it would randomly reboot during standby. This one works just fine.
Great job.
Re: overclocking
ericizzy1 said:
meschle said:
ericizzy1 said:
hi mark.sorry about those questions but i hope you'll have patiance with me:
1.is overclocking(the cab you made) good with the tmobile mda(us)?
2. will doing so void my warrenty?
3.does it drain the battery much faster?
4.does the extra speed make a big diffarence?
thank you so much!
Click to expand...
Click to collapse
1. Yes it should fine with your device
2. Yes it will void warranty but most of us have had no problems at all with it running at 240Mhz.
3. Only small increase of battery drain at 240Mhz
4. Extra speed does make a real difference - could not go back to the standard speed.
Click to expand...
Click to collapse
5. do i need to unlock my device to do overclocking or i can used tmobile brand device?
Click to expand...
Click to collapse
No, you do not need to unlock your device. T-mobile or any other brand of wizard will work fine.
after i register the program and soft reset, i'm getting an erro message could not start omapclock....
do i someting wrong?
i put the cab file on the pda, disconnect the pda from the computer, install the cab file, register omapclock plus and soft reset and on startup i'm getting the error message.
help wanted
Megapaul said:
after i register the program and soft reset, i'm getting an erro message could not start omapclock....
do i someting wrong?
i put the cab file on the pda, disconnect the pda from the computer, install the cab file, register omapclock plus and soft reset and on startup i'm getting the error message.
help wanted
Click to expand...
Click to collapse
Hmm interesting - sounds like you did everything correct - check on your device through file explorer in \program files\omapclock directory - you should have omapclock.exe, omapclockplus.exe and omapclock.lnk.
Looks like for some reason you have a missing omapclock.exe. Did you have omapclock installed before? as it needs to be completely uninstalled including the notification in the queue if you set it up.
I use the smartskey program and it has a feature to automatically overclock the processor both at startup and after hibernating. Is this program useful for me at all?
tynictansol said:
I use the smartskey program and it has a feature to automatically overclock the processor both at startup and after hibernating. Is this program useful for me at all?
Click to expand...
Click to collapse
Yes you can overclock via the smartskey method - check the smartskey thread or overclocking thread for instructions.
You may find using the above cab a simpler solution.
My install doesn't stay registered after a reboot. Also it clocks back to default after it goes to sleep and doesn't overclock back on resume. Ideas?
roshambo said:
My install doesn't stay registered after a reboot. Also it clocks back to default after it goes to sleep and doesn't overclock back on resume. Ideas?
Click to expand...
Click to collapse
On mine it has always stay registered - not sure where the key is to make it stay registered perhaps tom (the author) can help there.
It takes 10-15 sec wait before you can resume after a suspend - does it still not overclock after automatic suspend and then resume? Did you have omapclock installed before or smartskey?
Maybe I should make a new simple application to check OmapClockPlus is registered or not.
so, I would like to know that OmapClockPlus dialog's message after a reboot.
(OmapClock is already registered.)
or
(OmapClock is not registered.)
thank you
tom
I just tried this out...Omap starts up just fine...I can manually put it into suspend and bring it back up and it still stays at 240. But, if I let it go into suspend automatically, then try to bring it up, it goes back to default speed.
iPhone MASTER package! 1.1(release date: 25 April'08)
UPDATE, ADDED A NEW VERSION WITH THE NEW iFONZ!
{Introduction}
There are tons of iPhone lookalike programs out there and my goal is to pack em all into one big package. The goal is "One install CAB that creates and installs al iPhone software at once". This is the version 1.1. It should install all the software listed below and create the right shortcuts into Ifonz. It is using the newest iFonz. Make sure you are omaped to around 286 mhz to keep it running smooth.
{Programs}
All programs listed below are installed. Credits to their Authors!
Programs in bold are new in 1.1
Ifonz 0.99
S2P 0.40
S2V 0.35
S2U2 1.01
IContact 0.6
Battery Status 0.04
ThumbCal 0.5.1
Total Commander
Reg Edit
Task Manager
Advanced Config 1.0
Pim Backup 2.8
All Black Theme
{Screenshots}
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
{Installation}
I recommend that you install it on a clean PPC installation! My advice, backup with PIM Backup (get it here). save the backup to your storage card. HARDRESET, install my package, restore PIM backup.
Download
Unpack
Copy to PPC
Install the CAB
Reboot PPC
Enjoy!
Make sure you OMAP your processor after installation in battery status.
{Know Bugs}
* Battery Status doesn’t show correct on Today screen if iFonz is closed (fixxed in next version, still no fixx gonna rebuild whole package for it soon).
{Some more}
I am open for any suggestions to program changes.
If you think i missed a program or if you just don't like something? tell me! If you found some bugs, tell me!
IF YOU HAVE ANY BUGS, COMMENTS, SUGGESTIONS, TIPS OR PROBLEMS, POST THEM HERE!
If you liked my work? Donations are welcome!
Not a bad idea, but I believe that there is a newer version of iFonz. Also, my personal favorite is actually iTask since it it much smoother than iFonz (I know it is flash, but...)
Other than that, not a bad idea!
Good Idea
I'm really impressed, but you make it, that the user can select the programs he like, e.g. I don't need another Explorer then Resco... So TotalCommander as well on my device would waste space...
Good job, go on!
McTell said:
I'm really impressed, but you make it, that the user can select the programs he like, e.g. I don't need another Explorer then Resco... So TotalCommander as well on my device would waste space...
Good job, go on!
Click to expand...
Click to collapse
Thanks!
If you really dont want total commander you can just delete the map from the installation folder and change the icon in iFonz.
egzthunder1 said:
Not a bad idea, but I believe that there is a newer version of iFonz. Also, my personal favorite is actually iTask since it it much smoother than iFonz (I know it is flash, but...)
Other than that, not a bad idea!
Click to expand...
Click to collapse
I know about that but newer versions got the fade in/out function of programs. This is something you CANT turn of and dosnt go smoothly on slower PPC's
wow this is amazing, i had to search for about 1/2 those programs and now i find it all in a single package
if i have some of the programs already installed should i uninstall prior to installing ur cab
ie; s2u2, s2p, total commander came with my rom as well as pim backup etc;
do let me know cant wait to try this
xboxhaxorz said:
wow this is amazing, i had to search for about 1/2 those programs and now i find it all in a single package
if i have some of the programs already installed should i uninstall prior to installing ur cab
ie; s2u2, s2p, total commander came with my rom as well as pim backup etc;
do let me know cant wait to try this
Click to expand...
Click to collapse
Yes, i recon you unistall these first
since total commander and pim backup were included in the rom i have no way of uninstalling them the others however i can
xboxhaxorz said:
since total commander and pim backup were included in the rom i have no way of uninstalling them the others however i can
Click to expand...
Click to collapse
hmm won't really matter then.
robin31 said:
Thanks!
If you really dont want total commander you can just delete the map from the installation folder and change the icon in iFonz.
I know about that but newer versions got the fade in/out function of programs. This is something you CANT turn of and dosnt go smoothly on slower PPC's
Click to expand...
Click to collapse
you can turn off the open animation of programs under icon settings "normal- no animation" and in ver .99 you can change open animation pic as well located in the gfx folder called loadingP.png & loadingL.png.
I inverted the pic and now have a black loading screen when opening programs.
!Kernel Panic! said:
you can turn off the open animation of programs and in ver .99 you can change open animation pic as well located in the gfx folder called loadingP.png & loadingL.png.
I inverted the pic and now have a black loading screen when opening programs.
Click to expand...
Click to collapse
Thanks, will take a look at this in a minute
everything works fine so far, although the calendar only works when launched can it replace the windows cal
the splash screen im not really a fan of, yes having iphone apps on our ppc is great but putting their logo too, thats just too much
Congragulations
Hi
I just downloaded and tried it.Since I didn't have time to hard reset and install it,just installed it to the device and after restart it has been working well.
Only 2 complaints:
1)The dialer could have been an Iphone similar variant
2)A bit slow.
But good job.keep it up.
!Kernel Panic! said:
you can turn off the open animation of programs under icon settings "normal- no animation" and in ver .99 you can change open animation pic as well located in the gfx folder called loadingP.png & loadingL.png.
I inverted the pic and now have a black loading screen when opening programs.
Click to expand...
Click to collapse
Added it in the new package wich is available now
RAMBO29 said:
Hi
I just downloaded and tried it.Since I didn't have time to hard reset and install it,just installed it to the device and after restart it has been working well.
Only 2 complaints:
1)The dialer could have been an Iphone similar variant
2)A bit slow.
But good job.keep it up.
Click to expand...
Click to collapse
1) Looking for one, you got any ideas?
2) What OMAP you running on, Im running it on a Herald OMAPed to 299 Mhz
ya it was a bit slow so i uninstalled it, i havent overclocked mine as i want to save battery
ill just install the apps manually unless i get a tilt or something more powerful
Good program
I also installed a modified version of nargus(?) iphone similar dialer.it works well,so it might not be hard to integrate.
Mine is stock I think,that might be the reason it's slow.If you can add in the latest battery status which can overclock on demand to keep battery use under check.
One last question,where can I find the programs folder?I know of the file explorer,but it's hard to find the programs by going to root of install.Like WMstorage5,Seagee etcI have a feeling I am missing something
But I have to admit,its a good work.
robin31 said:
1) Looking for one, you got any ideas?
2) What OMAP you running on, Im running it on a Herald OMAPed to 299 Mhz
Click to expand...
Click to collapse
RAMBO29 said:
I also installed a modified version of nargus(?) iphone similar dialer.it works well,so it might not be hard to integrate.
Mine is stock I think,that might be the reason it's slow.If you can add in the latest battery status which can overclock on demand to keep battery use under check.
One last question,where can I find the programs folder?I know of the file explorer,but it's hard to find the programs by going to root of install.Like WMstorage5,Seagee etcI have a feeling I am missing something
But I have to admit,its a good work.
Click to expand...
Click to collapse
Thanks, will take a look @ the dialer
Will update BS aswell..
updated 9 may
ok...but when reboot the ppc show to me more and more error...but i think this is a great idea!!good!!
my p3600 is death after unistall it...
Hello everyone!!
After a lot of work I have something stable to give you . There are still some little things to polish but I think this is worth for you to try .
It includes also a mini theme that's made by chriscsh. Thanks pal!!
You can find the details at my web at
http://www.throttlelauncher.com/portal/
It's in the second news entry .
Hope you like it!! Of course I look forward and appreciate all your feedbacks (nice ones and constructive critics ;-) ).
Thanks!!
--------------------------
Hi!!!
Here you have a little preview of what's going to come in the new release
http://www.throttlelauncher.com/portal/index.php/the-news/1-latest-news/82-094-beta-video-preview
-----------------------------
Hi!!!
0.9.3 Released!!!
Details here:
http://www.throttlelauncher.com/portal/
To ask for support visit: http://www.throttlelauncher.com/forum
I'll try also to give support at this same thread but I cannot guaranty it as this thread is getting too big and unorganized.
Lot's of changes but this are the more relevant:
- Landscape mode support.
- Truetype support.
- Page changing almost automatic (after first load ofcourse...).
- Experimental support for flash plugins (need to be configured through TXT files) Thanks TWolf!!
- Experimental support for 3rd party plugins (new contacts page layout using plane or Direct3D mode, and clanedar page. See below a link to a how to develop you're own Throttle extension)
- Many others!!
To configure Twolf Flashes included on 0.9.3 for each flash (clock, contacts and weather) theres a txt file located at ThrottleLauncher\Setups\Touchflo3D\Twolf\. In that file look at each file items descriptions for more details.
Flash sources provided by TWolf here: http://www.throttlelauncher.com/foru...72&postcount=2
Hope you like it!!
Please post feedback
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm working on a tutorial on how to develop a 3rd party plugin using .NET. It's really eassy (as eassy as extending a control). If anyone is interested here you have my little hello world example ;-).
http://www.throttlelauncher.com/forum/showthread.php?p=2253#post2253
Is really eassy to fit any .NETCF development inside throttle .
edl said:
Hello,
if you would like to uninstall the applications, then deactivate first the today plugin,then do a SOFTRESET, then do the uninstallation via Settigs/System/Remove Programs.
I made the experience, that this works to 100%.
I thought this could help the one or the other.
Click to expand...
Click to collapse
To use flash plugins
- Weather: http://forum.xda-developers.com/showpost.php?p=2481601&postcount=1007
- Contacts: http://forum.xda-developers.com/showpost.php?p=2482879&postcount=1021 http://forum.xda-developers.com/showpost.php?p=2484186&postcount=1033
Known issues (beeing worked out)
- When changing to landscape the flash clock or the calendar may appear infornt of everything
- Weather problem (solved by using this patch: http://forum.xda-developers.com/showpost.php?p=2480618&postcount=979 Thanks cesc!!)
- On some devices contacts 3d mode is slow or may not work. Use plain mode instead.
- Flash may be slow on some devices and may drain battery faster. Understand flash implies very intensive CPU usage.
-----------------
Hi again!!
I've released 0.9.2Beta out!! .
Please see details here:
http://www.throttlelauncher.com/portal/index.php/pruebas/34-public-releases/76-092beta
There you have the changelog and the details on how to install. It really simple, only one app to install .
If you wanna do some tweaking for memory/speed look here:
http://www.throttlelauncher.com/foru...=1655#post1655
Please post feedback (even a everything works is a feedback;-) )!! Hope you like it!!
Thanks!!
If you have some questions please check this post's:
http://forum.xda-developers.com/showpost.php?p=2376379&postcount=523
http://forum.xda-developers.com/showpost.php?p=2376379&postcount=524
http://forum.xda-developers.com/showpost.php?p=2376379&postcount=526
http://forum.xda-developers.com/showpost.php?p=2377786&postcount=582
Also to get support, as this thread is becomming a little bit messsed feel free to use my forum at http://www.throttlelauncher.com/forum
Ofcourse I'll continue answering questions posted here ;-)
Remeber there are other nice themes for Throttle diferent than the TouchFlo3D:
- WM7 -> http://www.throttlelauncher.com/portal/index.php/setupsaskins/45-091setups/74-paulwm7
- Minimal Flow -> http://www.throttlelauncher.com/portal/index.php/setupsaskins/45-091setups/69-new-minimal-flow-theme
- Only photodialer -> http://www.throttlelauncher.com/forum/showthread.php?t=23
it looks promised but can you give some quick informations about which windows it's compatable with and i think it needs at least Net fwork 3.5
thanks for your great work
cheers
Just tried it on my Blue Angel WM6.1
Runs a little slow, seems quite buggy too graphics wise, but a great idea and once refined could become very nice indeed!
Great work!
Coolest app around
I will upload my setup when I get my stupid 19701 build rom working properly
looks great! but, i cant get the default setup cab to install, just keeps telling me install unsuccesful. i tried soft resetting and installing again, to no avail. the actual program itself installed fine. also tried the exe setup and get the file is corrupted error.
nevermind. right clicked then saved target, now file size is right. thanks again for the great app.
haam1978 said:
it looks promised but can you give some quick informations about which windows it's compatable with and i think it needs at least Net fwork 3.5
thanks for your great work
cheers
Click to expand...
Click to collapse
Hi Haam!
I've updated first post with the info. It's WM6 and WM5 compatible and I've developed it using VS 2005 so must be compatible with NET.CF 2....
the_scotsman said:
Just tried it on my Blue Angel WM6.1
Runs a little slow, seems quite buggy too graphics wise, but a great idea and once refined could become very nice indeed!
Great work!
Click to expand...
Click to collapse
Hi!
Sorry for the bug you may have found... May I ask what kind of bugs are you experimenting? Theorically it must work quite fast on a 400 Mhz CPU like your's. I've tested it on my Herald and works quite fluent.
gullum said:
Coolest app around
I will upload my setup when I get my stupid 19701 build rom working properly
Click to expand...
Click to collapse
Thanks for cumpliment! It will be cooler when you upload your setup !! I hope you'll solve the ROM prob soon!
Thanks!!
Thanx great app
Hi again,
I tried running it again when I got home from work.
The glitch is now gone. What happened was the wallpaper of my today screen turned grey and stayed grey until I did a soft-reset. Also the keyboard icon at the bottom of the screen kept showing up on top of the Throttlelauncher icons.
One thing I notice is that when scrolling the bottom icons, there is a freeze when the second hand moves on the clock.
Also, I tried adding a contact...it seemed to work fine. I tried adding another...then it stopped responding...the new contact didnt appear. I could still scroll the bottom icons, but selecting any of them didn nothing, it didnt respond. I had to soft reset.
Hi!
Thanks for the quick answer!
Are you using the main app (ThrottleLauncher) or the today plugin (ThrottleToday today screen plugin)?
the_scotsman said:
Hi again,
I tried running it again when I got home from work.
The glitch is now gone. What happened was the wallpaper of my today screen turned grey and stayed grey until I did a soft-reset. Also the keyboard icon at the bottom of the screen kept showing up on top of the Throttlelauncher icons.
One thing I notice is that when scrolling the bottom icons, there is a freeze when the second hand moves on the clock.
Also, I tried adding a contact...it seemed to work fine. I tried adding another...then it stopped responding...the new contact didnt appear. I could still scroll the bottom icons, but selecting any of them didn nothing, it didnt respond. I had to soft reset.
Click to expand...
Click to collapse
Looks good
One suggestion tho, when you scroll the bottom icons, the background turns black, can't it be transparent?
dferreira said:
Looks good
One suggestion tho, when you scroll the bottom icons, the background turns black, can't it be transparent?
Click to expand...
Click to collapse
Hi!!
You can try making it transparent by two methods (both experimental) but probably it will be too much for a 195 Mhz processor... It's is for my Herald (overclocking to 273 make faketransparency look near smooth). If you wanna try it, access the setup config dialog (Through ThrottleConfig app) and go to experimental tab. There set to true even truetransparency (the slowest option) or fake transparency, click save, exit and then click the reload button.
Thanks!!
good program and it will be a great program once the speed and the bugs get worked out.
I can't wait for the next release.
bridic said:
good program and it will be a great program once the speed and the bugs get worked out.
I can't wait for the next release.
Click to expand...
Click to collapse
Hi!!
Thanks for the comment but.... can you be a little more specific with the "bug" thing... If I don't know them I cannot solve them! .
edit: BTW, wich device are you using (to try to figure out the speed thing).
Thanks!!
I installed it, but I kept on getting errors while trying to run it. Now I cannot uninstall it (via "Remove Programs"). How do you manually remove it? Thanks!
egzthunder1 said:
I installed it, but I kept on getting errors while trying to run it. Now I cannot uninstall it (via "Remove Programs"). How do you manually remove it? Thanks!
Click to expand...
Click to collapse
First of all sorry for the errors. Can you specify what kind of errors you get please? (to try to solve them for next release. Also, have you installed both cabs? (the default themes cab too).
Someone has also had some problems uninstalling here you have the description on how he got it solved .
http://www.throttlelauncher.com/forum/showthread.php?t=42
Look specially at the 4th post.
Hope it helps!!
APBilbo said:
First of all sorry for the errors. Can you specify what kind of errors you get please? (to try to solve them for next release. Also, have you installed both cabs? (the default themes cab too).
Someone has also had some problems uninstalling here you have the description on how he got it solved .
http://www.throttlelauncher.com/forum/showthread.php?t=42
Look specially at the 4th post.
Hope it helps!!
Click to expand...
Click to collapse
Most of my errors were due to Certifications, but I changed the rom yesterday night and all that went away. I did what the post said, but no luck. I think that the problem was that I tried to manually uninstall it before I read your post, and I erased the other reg key as well as the program folder before erasing the one in "Security". For future reference (at least for me), order does matter Aw well, i guess it is back to re-flashing for me. Thanks for your help though
egzthunder1 said:
Most of my errors were due to Certifications, but I changed the rom yesterday night and all that went away. I did what the post said, but no luck. I think that the problem was that I tried to manually uninstall it before I read your post, and I erased the other reg key as well as the program folder before erasing the one in "Security". For future reference (at least for me), order does matter Aw well, i guess it is back to re-flashing for me. Thanks for your help though
Click to expand...
Click to collapse
Ok, sorry for that... ... I will try to solve the certificates thing for next release . Thanks!!
found a problem
see attach photo
touchflo 3d Look???
Can you make the setup look similar to touchflo 3D?
aih1977 said:
Can you make the setup look similar to touchflo 3D?
Click to expand...
Click to collapse
Thanks for the screeny . I'll try to figure out a way to hide the tray bar....
About the touchflo 3D... I'm currently working on a new way of scrolling similar to the footer of touchflo 3d. I've it already working but I wan't to improve graphics before releasing. If you mean if you can make something similar to the weather animations and that stuff.... I'm sorry to say no.... Any way I can try to develop a setup close as possible to touchflo 3D.
Thanks!!
Welcome to mehul_Pro Series m5 Build 21844
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pro Series m5 must give you 65mb on startup AFTER configuring all active sync properly and a deleting unwanted processes on startup. i have used SDK Notification enhancement in this special edition Rom.so its look like htc mega Notification enhancement.i have used TPC mega dialer black skin so it also look like special dialer.all Essential and basic applications are used from opal stock rom.
How to install:
- Flash this ROM as usual
- Wait 3 minutes on the welcome screen
- Calibrate screen
- finished the configuration you must reboot
- For home setting bug install below cab
- Install this cab: http://www.4shared.com/file/fndT0s2N/fp7_ppc_en.html (it's important)
-Restart your phone and enjoy my rom
Download here:http://www.mediafire.com/?xj9p8a8chil6gh5
Welcome to mehul_Pro Series m4 Build 21844
Pro Series m4 must give you 69mb on startup AFTER configuring all active sync properly and a deleting unwanted processes on startup. i have used SDK Notification enhancement in this special edition Rom.so its look like htc mega Notification enhancement.i have used TPC mega dialer black skin so it also look like special dialer.all Essential and basic applications are used from opal stock rom.
• Some RAM and Battery saving tips
1. Keep on Hibernating your phone.
2. Use M2DC( Manilla2d customizer) and remove the tabs you don’t use.this reduces touchflo2d.exe size saving some RAM.
3. Keep the backlight at level 2 to save battery.
4. Use USBTOPC for faster data transfer.
5. Give your device a restart every alternate days.
6. Use touchpal keyboard with Ezinput skin to have the lates HTC keyboard experience which is fast,responsive,finger friendly and RAM saving.
7. Use light dialer skins.
8. Use S2P istead of Audio Manager.
9. Turn off touchflo while watching movies in Core Player or while using Camera.
download link:-http://www.mediafire.com/?771vxt4941lv29l
New ROM
Cool. I'll give it a try. Thanks.
Ok, I've downloaded it and flashed my phone with it. When it reboots I see the Tri-Color screen and get the following error message:
Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center.
I've seen an error message something like this previously, if not exactly like this. It's been a while so I don't remember what it was. But I received the error message when I tried a ROM that was region locked. Is your ROM region locked?
when I flash your rom, my Opal stay at bootloader screen with this text
"Your OS ROM isn't customzed for your hardware"
is there a solution?
Yesterday I tried to flash this ROM and got the same error message as stated in post 2 and 3.
tried this rom yesterday....i hav to say it was really very good, very fast, lots of free ram, and very original looking...
but i installed evo 2 again because i cant access file explorer with touch, means it works only with d-pad, and calender also....
abhishek69 said:
tried this rom yesterday....i hav to say it was really very good, very fast, lots of free ram, and very original looking...
but i installed evo 2 again because i cant access file explorer with touch, means it works only with d-pad, and calender also....
Click to expand...
Click to collapse
hi abhishek69
thanks for good feedback.
about file explorer you can install other explorer then file explorer will works good enjoy my rom
Concerns...
mehulkarate said:
hi abhishek69
thanks for good feedback.
about file explorer you can install other explorer then file explorer will works good enjoy my rom
Click to expand...
Click to collapse
Well,the screenshots do show that the ROM is good and looks like the originl 6.1,but my concern is u havent still answered the queries stated in post 2 and post 3...so may be,resolve the issue first and den i may flash the ROM..
will try
Solution?
Good morning. In my case the same topics in 2 and 3, I ask some help to solve the problem.Have a good weekend !!!!!!!!
Waiting..noting else..
tsunami_ara said:
Good morning. In my case the same topics in 2 and 3, I ask some help to solve the problem.Have a good weekend !!!!!!!!
Click to expand...
Click to collapse
So Are we GONA get a REPLY in this case???....chefs-reply..
I gave the ROM a shot, i dint face the problem as stated many times above, but (no offence intended) I really found this ROM very annoying, File explorer loads very slowly, many apps dont work not even the basic ones like OMAPclock. Touch interface doesnt work in file explorer or while messaging, you have to resort to the hard keys to navigate through it, Manila is unable to load music, SenseUI doesnt seem to work (Mobile Shell to be precise). Hope for these issues to be addressed quickly,
Thanx and Regards,
(P.S no offence intended, honestly.)
karthiksk said:
I gave the ROM a shot, i dint face the problem as stated many times above, but (no offence intended) I really found this ROM very annoying, File explorer loads very slowly, many apps dont work not even the basic ones like OMAPclock. Touch interface doesnt work in file explorer or while messaging, you have to resort to the hard keys to navigate through it, Manila is unable to load music, SenseUI doesnt seem to work (Mobile Shell to be precise). Hope for these issues to be addressed quickly,
Thanx and Regards,
(P.S no offence intended, honestly.)
Click to expand...
Click to collapse
Congrats on ur senior member status...
shreyas18 said:
Congrats on ur senior member status...
Click to expand...
Click to collapse
lol. Thank you.
Thank you so much for this rom, for me this is the best i ever used. Fast stable much ram remain. 3 bugs i found is when soft bar on all setting on touch flo connection set up appear once you touch it and weather tab cant add location and dont have update weather on home screen and cant also add fav program on touch flo. 1 request can you give link for vibrate when touching keys| haptic feedback. Thanks again
Cool. I'll give it a try. Thanks.
Very beautyfull manila theme!! where did you find it?
Touch Response...
lhnzh12 said:
Thank you so much for this rom, for me this is the best i ever used. Fast stable much ram remain. 3 bugs i found is when soft bar on all setting on touch flo connection set up appear once you touch it and weather tab cant add location and dont have update weather on home screen and cant also add fav program on touch flo. 1 request can you give link for vibrate when touching keys| haptic feedback. Thanks again
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=450256 here u go for the haptics feedback...
This rom doesn't work for me.... it gives me the same error:
"Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center."
Touch Response
@shreyas Thank you so much for the link works like a charm.. 1 thing again how can i overclock i already try this but its droping to 186 from 276 dont know why?
lhnzh12 said:
@shreyas Thank you so much for the link works like a charm.. 1 thing again how can i overclock i already try this but its droping to 186 from 276 dont know why?
Click to expand...
Click to collapse
U install Omap clock plus on ur device and Omap clock keep....edit the Clockspeed value to ur desired speed and then repport the results over here or in the post mentioned in the link...mean while,the links:http://forum.xda-developers.com/showthread.php?t=718633
for Omap Clock keep:http://www.4shared.com/file/114544245/c6d6d51f/OmapclockKeep.html
Its to be used in sync...its like a husband cant do without his wife,so ud have to install the Clock+ 1st and den Clock keep...but edit values in the clock keep and register in the clock+
Damn. I should have done some more reading on this. and all this while i was going through the ****, simply because i dint have Clock keep, Damn it man!
Hi Guys,
I've just got a HTC Touch HD. I've got a few questions.
1. With HTC Interface disabled, on the normal start menu there is a gap at the top, I'm wondering how I can get rid of this
2. The font on the start menu is too big and other menus too, any way to change this via registry? and also the font on dropdown (well drop up) Menus.
3. Any way to get the default windows 6.1 style volume control instead of the HTC One?
4. Getting rid of the HTC Style input selection and replacing with normal windows type.
5. Is there anyway to get the "New" menu on the Today Screen on WM6.1, pretty sure i've had it on other wm6 phones
6. Is there any "must do" tweaks on this device to improve performance and functionality, I've found that it's not much more responsive/fast as my old HTC Himalaya using the classic WM6.1 Screen. Photos seem to zoom in quite jerky on the Touchflo interface etc, just expected a bit more from this quite new device, and the game "Teeter" also seems a bit slow, would have thought the 500mhz processor would be more than enough to play it smoothly, seems the only device that I've seen play it smoothly is the 1.2ghz HD2. Also a HTC HD Fake I had, with a Marvell Monohans chip ran much faster.
7. How Can i Change the fronts on the today screen to the normal type, I have put Clearview off but it's still the "calibri" type font, wondering how to change
to the normal font like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8.
Also I'm having a problem with my GPS, my program cant detect it, the program I'm using is called GPS Performance it cant connect to the GPS.
In the "External GPS" Option, what settings should be selected on the Programs port, hardware port, Baud rate and should I use the "Manage gps automatically" checkbox. I find that It doesn't let me change the Hardware port, it's set to none.
Thanks guys, P.S I've read the FAQ's before posting.
1. the gap at the top of the start menu will eventually fill up with your recently used programs in big icon style.
2. the font size can be changed with HDTweak, a must have program for the blackstone
3. if you on't like it at all, you can look up a rom that does not have it, or install another volume control, and then uninstall it again, that way, it should revert to windows mobile standard, and not htc standard.
4. have a look into input options, afaik the stock rom still comes with all the classic input options like keyboard, block recognizer, transcriber...
5. what menu exactly, describe a little more or make a screenshot.
6. the blackstone by default has 528mhz, the leo has 1ghz, and if even teeter does not run smoothly, you might want to perform a hard reset or have a look which rom is installed and change that, either to the latest stock rom or to a cooked rom. that behaviour is not normal
7. you can change fonts by putting new fonts in the windows\fonts\ folder and use a tweak app to apply them (i'm not sure, whether they all have fonts options though)
8. the external gps option, as the name points out, is for the use with an external gps receiver, which would be connected via bluetooth. it has nothing to do with the internal one. all programs that use the gps should have the option "gps managed by windows" or "internal gps". using that setting you have to do nothing more to set up gps. for instance: i use gps in manila, google maps, klicktel and navigon mobile navigator. manila and klicktel didn't need any gps settings, in google maps you just need to activate "use gps" and in navigon, where there are detailed gps settings for all kinds of devices, i just set "let windows manage my gps". you never have to set a com port, baud rate... if you are asked for those settings, you picked the wrong option in the first place.
no offense, but let me ask you a question: i know we talked before, about the classic wm6.1 home screen. these are many questions that are very special and all revolve around the basic interface of winmo. do you really need every single thing to be exactly like with old devices like the himalaya? windows mobile was developed further than that and most of the development is a good thing. for one thing, winmo distanced itself a bit from being a pda to becoming a phone, that could be used for fun as well and it has become finger-friendly. castrating this wonderful finger-friendly phone to becoming a mid-2000's pda, with the need for stylus control and an ugly interface does not make sense to me. i had a blueangel and a universal for years, and i know the pda feeling from all the time i used them with stock wm2003se (and stock wm5 respectively). then i got bored and tried cooked roms, and in the end, when i knew, the devices are too weak and lack a lot of hardware features (g-sensor, gps, ambient light sensor, stylus sensor, 3.5g, proper camera...), i decided to get myself a blackstone, and basicly, after a few minutes of getting used to it, i am happy about all the change, that's why i bought a new phone.
so why did you buy a new phone, to castrate it to behave just like a very old phone?
Hi Tony,
1. Thanks, I just noticed that it fills up with recent programs, anyway to remove this Gap though, it is useful for some people but I don't have much use for it
2. Thanks, Will try that out
5. I want to get this menu at the bottom :
6. Yeah I would think that 528mhz is enough to run Teeter as smooth as possible but on the HD2 its much smoother, I wouldn't think that game would require a very fast processor, I don't know if the Drivers for rendering graphics are bad on some of the Blackstone ROMS? or would it be the Teeter game itself? Anyone found a way to smoothen it up. I don't know if it's true but I've been reading lots of info saying Qualcomm Chipsets are junk for Video/Graphics.
As for the responsiveness of General usage, I don't know if the stock ROM is somewhat a bottleneck.
7. Thanks will try that
8. Ok, I had that set to Automatic, my program asks me which Port and Baud rate? What should I select, I went through all the Ports and it cant connect, I guess it might be a problem with the program, I'll see if the GPS Apps pick it up.
Also I might ask on this thread instead of starting a new one, my computer keeps telling me that I need Flash Player 8 to run the Getting Started disk, but I have already installed flash player and it still asks, other people have had this problem too. I've got Windows 7 Ultimate x64
Really, I am not a fan of Flashy interfaces with clouds descending and vibrating storms to tell me what the weather is, HD tried to copy Apple, but the Touchflo interface is often slow, buggy and non responsive, it's better in the Leo but on Blackstone it's somewhat problematic. I'm just used to the old Pocket PC's wtih the old Interface. The only reason I bought a Blackstone was for a higher res screen, better camera and Wifi
Another question - I've noticed the Blackstone seems to have no dedicated graphics/video accelerator that Coreplayer can support, so the Video playback is pretty appalling for a device named "HD". I have a video that isn't even the resolution of the screen of the HD and it only benchmarks at about 75% playback speed.
Is there any drivers that can make use of the MSM Chipset to give good video performance? I don't know but I thought the predecessor HTC Diamond had a 3D Accelerator. I'm not at all keen on converting every single episode on my computer using the Application for video playback on the HD that is out, so any chance to improve playback on the HD with coreplayer? Again coming from a person who had a Himalaya, it had an ATI Imageon chip that coreplayer supported.
kidcash said:
5. I want to get this menu at the bottom
Click to expand...
Click to collapse
here dude
Rn