Database Users

Problem after upgrading

I've performd the LvsW AKU2.3, but after the upgrade the system hangs on the splashscreen displaying de IPL, SPL and OS versions...
Can anybody help me with this problem ? Is there like a rom recovery tool or something?

Some more info:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34

Never mind fixed it allready

how can fixed it??

same problem here. How did you fixed this problem?

Press and hold the camera button then press the reset button once. after that u release the cam button. u will see a colored red and green something screen.
In this mode u canupgrade ur prophet with any rom u want. The upgrade tool can read out ur device in this mode. I suggest u use a rom made for the prophet lol
Have fun

u mean that we can take any original rom to recover ! ?then we can run the upgrade at winxp via usb to upgrade ?
can told me step by step to upgrade at this mode , thanks

Well... theres nothing much to it...
When u press the camera button and the reset button at the same time and hold the camera button when u release the reset button, the device goes to a special boot mode or something...
What u see is a red-green-blue screen with the IPL and SPL version and at the bottom of the screen u see USB when u connect the usb cable.
To do next is run de original rom as u would do with a normal upgrade. Difference is that there's no sync active, just that windows detects a usb device.
thas all
I don't know if all the device's can run in this 'boot' mode, i guess u should upgrade ur IPL first in that case.. but i don't know the procedure for that unfortunately.. im new here too

oh and just in case:
The camera button is the top left button and the reset button can only be pressed with something pointy like ur stylus and is positioned at the bottom just on the left side of the usb connector

Black Out? Qtek S100

Hi,
Il from Belgium. SORRY FOR MY BAD ENGLISH
I have a Qtek S100
R 1.01.00
G 133.38
D 1.03.02 FRE ( French i think )
I tryd to change my Extended Rom from French to Dutch or English... with some file i dont know... im new it this stuff and i F**kt it up!!!
My Qtek just goene black and on the screen u can see USB 1.0.0
After open the baterycover and plug in back the qtek starts BUT after starting install the original app. it goes back to thr BLACK screen and nothing happens.
If I plug in the USB and connect it with my pc, it comes on the screen USB 1.0.0 ....
SO PLA HELP ME PLS!!!
I tryd hard / soft reset, NOTHING!
I look at XDA alredy 4 days everyday 4-6 hours I tryd SO MUCH, I take a day off work, so to can fix it!
IM GOIN CRAZY PEOPLE!!! PLS PLS HELP ME!

Best thing to do is go to bootloader mode and installing a new flash.
Bootloader mode can be found on the forum, but to help you out:
press simultaniously: camera button + power + soft reset (last one with the stylus)
Then start the rom update on your pc (do not use this from vista it wont work (or you have to find the fix online..)
Easiest way is to flash from windows xp works like a charm.

I have the same problem than rocky_gent but I can get the bootloader mode
i'm stack in bootloader mode ! And when i connect the usb cable doesn't display the "USB" but insists with "Serial V1.00".
I want to upgrade my rom from a secure digital (sd) cause i don't have another choice!
I 've been surfing through forums but i only found how to make an sd to upgrade your phone when you have an mda or xda (.nb1 files) . Qtek's roms have .nbf files !!! So i'm looking instructions to make an upgrade sd card with .nbf files (Qtek , Htc Magician) and not .nb1 (Xda)!!
http://forum.xda-developers.com/attachment.php?attachmentid=24569&d=1127232848

?
where can i get new flash? and yes im with vista, why it wount work???

Please I need HELP for My ELF !!!!

Hi ! Please I need your help !!! I have Elf , and after I upgrade to Onyx 5.6 and tried to install HTC MEGA Manila 2D 2.0 Base Package it's restarted and stop working I tried to Hard Reset but it doesn't hellp .
1) Hold down send/reject buttons (green/red at the front) and reset with the stylus
2) Release the stylus but keep holding the buttons till I get 'this will erase all your personal data' message
3) then press 'action' (big front button) to hard reset. But it go to start screen and after second go to black screen (or shutdown) , I can go to BOOTLOAD , but what should I do to get it work ?? Thanks !!!!
Sorry for my English !! I tried to update the rom from BOOTLOAD , after it fishish update Elf starts and go to black screen . any ideas why ?

Hi
Did you cid unlock your device before you upgraded to Onyx ?
If yes did you use Onyx for long time before installing Manilla or immediately after flashing ?
What's your IPL/SPL ?

please help!! after ROM upgrade the device stuck completely!

please expert guys help ...
i have new leo with ROM 1.43 today after trying to upgrade to ROM 1.66 I did everything as asked, the installer began , with all the colours on the leo display then it started the percent completion counter , and after 2% it wrote me error something , and the leo restarted but stuck in the white start up menu with the green HTC icon and below the R G D information but the device doesnt proceed further and stuck here !!!
please help !!!!
o bought the device in europe , but i am from israel , htc sent me notification about new arabic ROM with link , i tried with my serial to download but couldnt , it wrote me "this upload not compatible with ur device" , i downloaded it from here XDA developers , but it went wrong !! , the problem that the phone stuck in the loader menu , before uploading the sense interface , and i have no connection between the pc and the phone "no active sync" so how can i reinstall the older version or make the phone load again ?!!?!! plz help !

I would recommend to do a hard reset in the first place and see if that helps.
I don't know how you did the upgrade and what the exact error message was, but you have always the option of installing HSPL and a custom ROM, as long as you can connect through USB - that is entering bootloader (the tri-color screen) and seeing "USB" at the bottom of the screen.
Similar cases have been discussed recently at http://forum.xda-developers.com/showthread.php?t=625363
Most important: do not lose hope, there's always a way

hello thanks for reply
how can i hard rest , the phone is not moving from the white menu ,which comes before the orange menu with the windows mobile icon , the buttons in this menu are not responding , is there any way to do hard rest using some phone hard keys , because i cant establish any connection with the pc , so i guess i need to do something with the phone itself ...?

fadiheno said:
how can i hard rest , the phone is not moving from the white menu ,which comes before the orange menu with the windows mobile icon , the buttons in this menu are not responding , is there any way to do hard rest using some phone hard keys , because i cant establish any connection with the pc , so i guess i need to do something with the phone itself ...?
Click to expand...
Click to collapse
Hi
Take the battery out for about 10 sec. Then Put the battery back. Press and hold Vol down and Vol up then press the power button grey screen will ask the confirmation to format internal memory. Then press vol up. Then vol up for reboot
I hope you understand. Good luck

how to press voume up and down ?
do u mean at the same time bith vol up and down or first up then down ?
thanks

Thread closed. Exact duplicate thread in HD General.
WB

Imate JAM says USB on lcd

Hello everyone!
I have one imate Jam that's showing USB v1.02 on lcd n it's doing nothing at all. Cant even connect it to pc or anything at all. tried to put it in boot mode but nothing happened.
Wat can be wrong? tell me procedure for fixing this!
Regards
Tom

Showing USB1.xx is the bootloader mode ! Maybe a damage switch ?
I would try to flash it .
Cotulla says : *Enter bootloader mode on device (Press POWER + CAMERA + RESET, you will see Serial/USB at top and 1.0X at bottom)
*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
*After flashing press reset.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
Good luck

Have the same problem, tried flashing but update program doesnt pick up the phone and then errors... Im using windows 7, could that be the problem?

Thanks for sharing info..
Can u tell me what rom to flash my imate jam with? I m new here don't know much about imate flashing. can u give me the link for the rom here please??
Regards,

*Connect via USB to PC
*Run Update.exe
*Follow instructions in Update program.
*At the end you should see at device screen: "100% Upgrade OS Image Complete".
*After flashing press reset.
*Don't touch device, wait while "welcome screen" appear.
*Press screen, do calibration and start using device.
Where to download rom from?? update.exe?? where to get that from?

wihandw said:
Have the same problem, tried flashing but update program doesnt pick up the phone and then errors... Im using windows 7, could that be the problem?
Click to expand...
Click to collapse
Fix it like here described, its in german but you will understand it.
The Magician must be in Bootloader mode for this procedur.
View attachment 298939
To be sure that your MAgician is o.k. flash a ROM from your Provider. Also you can get Cotullas WWE3.03 ROM from here http://cotulla.pp.ru/Magician3.html
Be sure that you have Radio 1.12 on your Magician ! ! ! !

cum instalez radio 1.12? cum imi dau seama ca este instalat. please help me