Database Users

Reg Tweak FILES: Post/Get them here

Let's start a thread of all the reg tweaks ppl have come up with. If they are saved as .reg files (to an SD), we can install them with a mere double-click by using TRE (options>associate), and anyone can contribute to this post WITHOUT having to build .cab files! Why is this kewl; cos when u hard reset it's a real ball-ache to go back into all the forums to find the tweaks u applied and to navigate thro TRE to re-apply them all. This applies particuarly to settings (Owner info etc). Over and above, we are no longer beholden to tweak shareware, but have full and instant control over our settings.
Each tweak should have 2 reg files; Apply the tweak, and remove the tweak (if possible). In this manner, we can have a directory of reg files, and can turn on and off tweaks with a simple d.click.
Attached is a basic set I've compiled. Please let everyone know if any are a problem (ie perhaps whole key gets replaced and overrides something u have already changed). Files described below:
[*]Reg Date_In_Titlebar ON.reg
Adds the date to the title bar, with format according to your short-date format under settiings>regional (or found manually changed in another Tweak I'll cover later). I do NOT have a .reg file that will undo (ie delete) this new key, but it's easy to see what key is being added so u can delete it. <Credit: Well known PPC tweak - I probably learnt from toenailed>
Can someone please find out where we can change the font for this - it's a horrible bold font that doesn't fit in the space available?
[*]Reg Font_Menu_+_Pop_700 ON.reg
Change menus and popups to a smaller font. Nice size, makes VGA look more VGA-like, yet not so small that it fails cleartype nor looks daft. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_Menu_+_Pop_900 DEFAULT.reg
Reset above change to default of 900
[*]Reg Font_System_700 ON.reg
Changes system font to 2 pts smaller. I find that dialog boxes with radio buttons got a bit wierd, and you don;t get much more screen estate height cos of icon sizes staying the same in file lists, so I don't bother with this tweak. Requires a reset. <Credit: Well known PPC tweak - I probably learnt from toenailed>
[*]Reg Font_System_900 DEFAULT.reg
Turn above off
[*]Reg GPRS_+_3G_Always _On DEFAULT.reg
Awesome tweak to make sure ur phone connects to GPRS/3G and stays there. However, you'll want to switch this off overnight etc, which is the main reason I created this post and these reg files. NOTE: you will absolutely HAVE to replace the "MTN SA Web" bit with the name of your connection which you will find in this key using TRE
<Credit: BrettS http://forum.xda-developers.com/viewtopic.php?t=30277>
[*]Reg GPRS_+_3G_Always _On ON.reg
Turn off the above. Remember to change connection name in file
[*]Reg PIE_Homepage_Default.reg
When u press the E (explorer) keyboard key u go to clubimate homepage - annoying. This resets that hard button to whatever u want (current reg file is windows\default.htm)
<Credit: I forget, someone on clubimate forums>
[*]Reg TerminalServices_Cache_Larger DEFAULT.reg
AWESOME improvement in Terminal Services client horrible black blocks. Increases cache sizez - I did not notice an increase in traffic/cost
<Credit: Carnivor from MS KB http://forum.xda-developers.com/viewtopic.php?t=29996>
[*]Reg TerminalServices_Cache_Larger ON.reg
Turns above off
More coming as I go thro the wiki and toenailed tweak posts and extract usefull ones for us lonely Universal users...

can you add the actual keys to here?
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
cos of this thread
http://forum.xda-developers.com/viewtopic.php?t=30396

Doh! That post came up after I started this thread.
Still this thread is useful for the actual .reg files to same n00bies some time (and to save me time too). I'll make sure everything here is duplicated there tho.

Here are a few more .reg files:
Several versions of date_in_title_bar (covered above)
Hide_Screen_Rotation icon
Hide that icon that allows u to rotate screen - but JJ does it automatically so Icon is not so necessary
Regional_settings
These are for me - u should edit file in text editor to customise 4 yourself. Best part is my short date format that keeps date in title bar small and visible
Ringtone_settings
Customise as above
Screen_Speed_Glyph_Cache
Double your screen cache. COsts a LITTLE memory, and improves screen size
Screen_font_'smaller'
Set screen font size to "smaller". This can be changed in "settings"m and I only include it here in line with my suggestion that we have a collection of files to run quickly on reset. You may want to customise as above
SIP_Settings. Ditto
All in updated zip file.

I would really appreciate if anyone can find a way to get rid of the Last Call in the dialer screen... I know its somewhere hidden in Registry, but I dont seems to be finding a way to get tru it...
Having the Last Dialed No. showing rite up on the Dialer Screen is really bothering and if you happened to press the phone button by mistake twice there we go the last dialed no. has been dialed already for you....

Bump: no-one contributing to this learning?

haven't found anything else worth posting yet m8, u got the best ones already :wink:

craigiecraigie4: Thanks for these - great idea!
I have a suggestion:
HKCU/ControlPanel/Backlight sets the backlight duration for the keyboard (in seconds). It's available through the control panel, but I like it set to more than the CP maximum of 10 seconds. Sorry - I don't know how to create a reg file.
To reset, choose another value in the backlight control panel applet.
Don't have any others to add though

Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.

This one is in this forum:
from davidberrysmith
--------------------------------------------------------------------------------
Any body remember these reg tweaks from himalaya? they still work
*** Speed Up Your Windows Mobile Pocket PC.
1. Open your registry editor o_n your Pocket PC
2. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE\
3. Change the value of 'limit' from 8192 to 32768
4. Close registry editor and soft reset.
*** disable start menu animation
Browse to HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\
Change the "AniType" value from 6 to 0.
_________________
i-mate jasjar
Click to expand...
Click to collapse

SiliconS said:
Found another one:
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKLM\System\GWE
Change cxVScr to (say) 10 to make vertical scrollbar narrower. Default value is 14
Change cyHScr to (say) 10 to make horizontal scrollbar narrower. Default value is 14
This change affects various scroll options in the system including the up/down arrows in selection boxes. 10 is a nice size.
Click to expand...
Click to collapse
Nice one dude. I can't make the .reg file cos I can only create reg files of the entire key, and there are too many other things under GWE that users may have changed.

Internet Explorer
Somewhere in those forums I found the IE reg hack to make mine 5.5, this helps connecting to my bank account and viewing other secured sites.

read this somewhere
To change the ability to receive files via Bluetooth (OBEX)
The setting is at 'HKEY_LOCAL_MACHINE\Software\Microsoft\Obex'
The 'IsEnabled' DWORD value should be set to '1' to enable OBEX and '0' to disable OBEX.
For example, to enable the ability to receive fles via Bluetooth
HKEY_LOCAL_MACHINE\Software\Microsoft\Obex\IsEnabled = 1
says receive so i dont know about send, try it!! might be it
But apparently now this is the same feature as the receive incoming beams setting in connections.

Yes, I know that's not free but 90% of all this hacks have been included in Tweaks2K2. And the other 10% are about to be included :twisted:

Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.

craigiecraigie4 said:
Yeah, true. Idea of this thread was to have a facility whereby a hard reset can be quickly restored to a working device - install a few basic apps, run the .reg files, and there u go. Takes me about half an hour from HR thro to up and running perfectly.
Click to expand...
Click to collapse
With your .reg files as inspiration I'm just about getting there in the same way. I've written down all the steps and I just run through them. I've done this since I had my XDA2 and it makes a hard reset so much less traumatic:
Code:
Hard reset. Wait for Today screen then soft reset.
Connect cable to ActiveSync. Set up guest connection.
Turn off beams, error reporting
Set basic clock accuracy
Copy Step 1 files to root of PPC [These are the CABs for the programs I install]
Run CABs. Leave O2 Connections CAB. Put gps.CAB and PIMAddin onto storage card
Run TRE registry editor. Associate .reg files to TRE
Open the .reg file [This applies my registry settings. See below]
Run O2 connections CAB
Copy all Step 2 files to root of PPC [This adds shortcuts to StorageCard-installed programs to my Start Menu and gives me my freeware email client and PZP icons and profiles]
Run SDK Certs CAB
Run OzVGA. Change all fonts to same size as qVGA
PPC: edit registry: browse to HKLM\ControlPanel\GPS Settings. Delete the DWORD marked "hide"
CPL > Personal > Buttons: match Button 2 to [Task switcher], Button 4 to <Rotate Screen>; Set button lock
CPL > Personal > Menus: ActiveSync, File Explorer, Internet Explorer, nPOPw, Pocket Informant, Task Manager, TomTom Navigator
CPL > Personal > Owner: set owner information
CPL > Personal > Phone: change band to GSM
CPL > Personal > Today: set items to Date, PZP, PocketPlus, PocketBreeze, Messaging; set theme to Windows Default
CPL > System > Clock: Show time on all screens
CPL > System > Regional: Set locale to UK
CPL > Connections > GPS: set program port COM0
Soft reset
Set password for PPC
PC: backup previously sync'ed files folder
PC ActiveSync: delete previous partnership. Don't delete sync'ed files folder
CPL > System > About: Set DeviceID = XDAExec
Connect PPC and PC with cable
Sync only Contacts, Calendar (all), Tasks, Favourites
Sync files. Replace the items on the device
PocketBreeze: import settings
PocketPlus: import settings
PocketInformant: run and let it fanny about
PocketWeather (on PocketBreeze tab): import settings
Run ListPro. Enter registration code
Disconnect from PC
Set up phone speed dials
Set up voicedial tags
Set up ActiveSync via Bluetooth to Workstation
Set up bond to headset
Set up bond to GPS thingy. Choose Serial Port as profile
Start TomTom Navigator. Run through startup.
InternetExplorer: sort out view settings. Set default page to about:blank
Choose Transcriber input method. Import settings file
This is my .reg file that does almost everything I need done in one step:
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings]
"Group"=dword:00000002
[HKEY_CURRENT_USER\ControlPanel\Backlight]
"QKeyLedTimeout"=dword:0000001e
[HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client]
"Keyboard Layout"="00000409"
"BitmapPersistCacheSize"=dword:00000001
"BitmapCacheSize"=dword:00000015
[HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE]
"limit"=dword:00004000
[HKEY_LOCAL_MACHINE\nls\overrides]
"SSDte"="d/M "
[HKEY_LOCAL_MACHINE\HARDWARE\OEM\KEYBD]
"PieHomePage"="about:blank"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell]
"TBOpt"=hex:\
13,00,00,00
It makes a massive difference using commercial software that has a reliable import/export process for the settings and this, IMHO, is usually the biggest difference between paid-for software and freeware alternatives.

Silicon, don't u want to re-post your post here:
http://forum.xda-developers.com/viewtopic.php?t=31697
We need more of these 'standard' configs to help new users get up n running without giving up on their universal.

dude, your screen - how?
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same

Re: dude, your screen - how?
simon_darley said:
craigiecraigie4
how did you make htc look like that?
is it standard? emailable? I don't really want the merc style if it can be changed, but its a nice screen all the same
Click to expand...
Click to collapse
You don't want merc!! well u can just f off then! ;-)
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins

Re: dude, your screen - how?
craigiecraigie4 said:
It's WisbarAdvance2 with WAD - see another post I started in this forum. u can put in on any universal, with whatever walpaper u want, and there are plenty of free skins
Click to expand...
Click to collapse
Whatever it is, it's distracting to have such a big picture in your signature in such text-based forums.
Sorry craigiecraigie4. Don't mean to offend. Just MHO.

How to Change the Calander And Contacts Hardware Buttons?

anyone?
Any reg Hack like the jasjar?

not the answers on your questions but don't want to start a new topic.
is it possible to set a default view over the calender?

Re: How to Change the Calander And Contacts Hardware Buttons
OK, I found a trick but just for the left button.
In the registry:
HKEY_CURRENT_USER\Software\Microsoft\Today\112
(default) is the string that will be shown
Open is the path to the executable
Have fun with that
P.S. There are really interesting things in that registry - I browsed it a couple of days ago while travelling in the train

113 is the other key. there is an instruction what to change on www.beyondthetech.com/blogs/kjam . Here is a copy of that info:
"In a nutshell, there is an key called 112 under HKCU\Software\Microsoft\Today\Keys that contains two entries: the (default) value, which contains the label that is displayed on the Today screen (currently set to Calendar), and an Open value, which is currently set to the Calendar applet's full executable path, "\Windows\Calendar.exe" (yes, include the quotes). Simply change both values as you see fit and it will customize the left soft key.
To customize the right soft key, you have to create another key at the same level as 112, appropriately named 113. The (default) value is automatically created, to where you would simply name it as you need to, but you must add the Open value and give it the full path of the executable you wish to set it to, with quotes, i.e. "\Windows\fexplore.exe"

I've recently changed mine to compose a new SMS (even if the current focus in the Inbox program is e.g. MMS not SMS) with the left softkey, and TomTom on the right.
Fantastic! No need for the default ones on an Exec as there are hardware buttons for each.
Cheers
Ant

q-biq said:
not the answers on your questions but don't want to start a new topic. <snip OT question>
Click to expand...
Click to collapse
The whole point of having topics is to keep the answers relevant to the question, silly boy :roll: Tell you what, let's all not bother with them, and put everything in one nice big thread!

Koksie said:
113 is the other key. there is an instruction what to change on www.beyondthetech.com/blogs/kjam . Here is a copy of that info:
"In a nutshell, there is an key called 112 under HKCU\Software\Microsoft\Today\Keys that contains two entries: the (default) value, which contains the label that is displayed on the Today screen (currently set to Calendar), and an Open value, which is currently set to the Calendar applet's full executable path, "\Windows\Calendar.exe" (yes, include the quotes). Simply change both values as you see fit and it will customize the left soft key.
To customize the right soft key, you have to create another key at the same level as 112, appropriately named 113. The (default) value is automatically created, to where you would simply name it as you need to, but you must add the Open value and give it the full path of the executable you wish to set it to, with quotes, i.e. "\Windows\fexplore.exe"
Click to expand...
Click to collapse
In the interests of knowing, anyone tried putting a third one in and seeing what happens? It's interesting that I needed to reboot the phone to get the changes to 112 to apply, but the 113 works in real-time without a reboot.
Ant

There is an application in T-Mobile extended ROM that does the same but through GUI and you don't have to go to the registry (you'll have a new shortcut in System menu).

HTCHomeplug revealed

OK I was working in the customization of the HTCHomeplug.
What is HTCHomeplug? If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin that shows some icons like Battery, Rotation, Comm Manager, Screen Light, Quick GPS and TVOut. What I discovered is who to deal with this plugin in order to change the icons and applications associated there.
I used PHM Registry to edit entries at the PPC registry, but you can use the editor of your like.
First is access using the registry editor to this entry:
/HKEY_LOCAL_MACHINE/SOFTWARE/HTC/HTCHomeplug
There is the configuration of the plugin. There we will find two entries pointing to the first two icons (Battery and Rotation) that seems to be configured in a different way that the rest of the icons. Those are the two DWORD entries:
PowerIconSlot with value of 0 (this means the first position in the plugin)
RotateIconSlot with value of 1 (this means the second position)
The rest of the positions in the HTCHomeplug appears like KEY entries with names from 2 to 5 meaning positions 3 to 6 in the plugin bar.
Inside each key (2 to 5) we find 3 values (or entries):
1- iconindex DWORD type of Decimal which contains 103 in the case of entry KEY 2
2- LaunchApPath STRING contains the path to the executable file associated to the icon
3- ResPath STRING contais the path to the resource file which contais the icon image poited by iconindex entry. This path points to a DLL or EXE file containing the icon image.
So... since we want to add a icon/application we need to create the entry KEY 6 and we must create both STRING entries and DWORD one inside the KEY 6.
To add Tomtom Navigator in the HTCHomeplug (as an example) I added:
iconindex = 101
LaunchApPath = \Program files\Navigator\Tomtom Navigator.exe
ResPath = \Program files\Navigator\Tomtom Navigator.exe
So I'm using the icon storaged in the Tomtom Navigator executable file itself and my Tomtom is in the path I show in the entry. Off course this could not match your installation.
How I found the iconindex information that points to the icon in the Tomtom's EXE file??? Easy I used a program called RViewer (for PPC) develop by Vicott Wong. The program can by found in Google or in the web page shown in the About screen.... http://mobile-sg.com
Running that program and browsing the EXE file (or a DLL) we can see the index for each resource and if it's an image the image is display in the screen, so I found the 101 is the index for the Tomtom icon inside de EXE file.
Once the entries in the Registry are done the rest is easy. Just go into Start - Configuration - Personal - Today and int the Elements Tab. There unmark the HTCHomeplug and exit the configuration going into the Today screen to check that the plugin is not in the screen. Then we back to the Today configuration and select again the HTCHomeplug to mark it. Once we are back into the Today screen we will see the new icon.
(OK in the previous paragraph I'm translating the menu options and clicks from my spanish release of WM5 into english one so the names could not match... what you need to do is configure Today screen to remove the plugin and to configure again to insert the plugin, that way the plugin is reseted and the new icons loaded).
I did several tests and looks like the HTCHomeplug only supports 7 icons (0 to 6) but since many of the original icons are not use on daily bases we can setup up to 5 programs in that plugin leaving the Battery and Rotary icons in its place.
I hope this is useful... and I beg your pardon for my poor english.
Regards,
mahjong
P.S.: I posted this first at todopocketpc.com in spanish. If you know that language maybe you prefer read it in my mother language. For sure will be much better written.

mahjong said:
OK I was working in the customization of the HTCHomeplug.
What is HTCHomeplug? If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin that shows some icons like Battery, Rotation, Comm Manager, Screen Light, Quick GPS and TVOut. What I discovered is who to deal with this plugin in order to change the icons and applications associated there.
I used PHM Registry to edit entries at the PPC registry, but you can use the editor of your like.
First is access using the registry editor to this entry:
/HKEY_LOCAL_MACHINE/SOFTWARE/HTC/HTCHomeplug
There is the configuration of the plugin. There we will find two entries pointing to the first two icons (Battery and Rotation) that seems to be configured in a different way that the rest of the icons. Those are the two DWORD entries:
PowerIconSlot with value of 0 (this means the first position in the plugin)
RotateIconSlot with value of 1 (this means the second position)
The rest of the positions in the HTCHomeplug appears like KEY entries with names from 2 to 5 meaning positions 3 to 6 in the plugin bar.
Inside each key (2 to 5) we find 3 values (or entries):
1- iconindex DWORD type of Decimal which contains 103 in the case of entry KEY 2
2- LaunchApPath STRING contains the path to the executable file associated to the icon
3- ResPath STRING contais the path to the resource file which contais the icon image poited by iconindex entry. This path points to a DLL or EXE file containing the icon image.
So... since we want to add a icon/application we need to create the entry KEY 6 and we must create both STRING entries and DWORD one inside the KEY 6.
To add Tomtom Navigator in the HTCHomeplug (as an example) I added:
iconindex = 101
LaunchApPath = \Program files\Navigator\Tomtom Navigator.exe
ResPath = \Program files\Navigator\Tomtom Navigator.exe
So I'm using the icon storaged in the Tomtom Navigator executable file itself and my Tomtom is in the path I show in the entry. Off course this could not match your installation.
How I found the iconindex information that points to the icon in the Tomtom's EXE file??? Easy I used a program called RViewer (for PPC) develop by Vicott Wong. The program can by found in Google or in the web page shown in the About screen.... http://mobile-sg.com
Running that program and browsing the EXE file (or a DLL) we can see the index for each resource and if it's an image the image is display in the screen, so I found the 101 is the index for the Tomtom icon inside de EXE file.
Once the entries in the Registry are done the rest is easy. Just go into Start - Configuration - Personal - Today and int the Elements Tab. There unmark the HTCHomeplug and exit the configuration going into the Today screen to check that the plugin is not in the screen. Then we back to the Today configuration and select again the HTCHomeplug to mark it. Once we are back into the Today screen we will see the new icon.
(OK in the previous paragraph I'm translating the menu options and clicks from my spanish release of WM5 into english one so the names could not match... what you need to do is configure Today screen to remove the plugin and to configure again to insert the plugin, that way the plugin is reseted and the new icons loaded).
I did several tests and looks like the HTCHomeplug only supports 7 icons (0 to 6) but since many of the original icons are not use on daily bases we can setup up to 5 programs in that plugin leaving the Battery and Rotary icons in its place.
I hope this is useful... and I beg your pardon for my poor english.
Regards,
mahjong
P.S.: I posted this first at todopocketpc.com in spanish. If you know that language maybe you prefer read it in my mother language. For sure will be much better written.
Click to expand...
Click to collapse
Excellent post and thanks for your efforts and sharing! I'll be trying this out later. Just what I was looking for.
I'll report my experiences later.

Excellent! I will try this!
When using TrueVGA, does anybody know a way of making the icons work? I see only 1/4th of an icon, and it's even the wrong icon. The only icon is the one for the Light Settings...

Anybody know the iconindex for Opera so i can have the Opera icon instead of Web&Walk icon!

Mahjong tells you how to find it...
mahjong said:
How I found the iconindex information that points to the icon in the Tomtom's EXE file??? Easy I used a program called RViewer (for PPC) develop by Vicott Wong. The program can by found in Google or in the web page shown in the About screen.... http://mobile-sg.com
Click to expand...
Click to collapse

No Joy I'm afraid...
I'm afraid that it hasn't worked for me on the Ameo. Maybe it's due to how T-Mob have configured/altered things with their customisation of their ROM.
I reverted to using the TrayApplet in the same regedit folder that the HTCHompeplug resides in, but to no avail.
Quote "Just go into Start - Configuration - Personal - Today and int the Elements Tab. There unmark the HTCHomeplug and exit the configuration going into the Today screen to check that the plugin is not in the screen. Then we back to the Today configuration and select again the HTCHomeplug to mark it. Once we are back into the Today screen we will see the new icon.
(OK in the previous paragraph I'm translating the menu options and clicks from my spanish release of WM5 into english one so the names could not match... what you need to do is configure Today screen to remove the plugin and to configure again to insert the plugin, that way the plugin is reseted and the new icons loaded). " End Quote.
No HTC Plugin on the Ameo Today settings menu either, but visible in HLKM...software etc...as the HTCHomeplug.
I can get some of my choice of programs in the TrayApplet, but not the associated icons!!??!!
Same as before when I tried. Anyone else with an Ameo who has had success in getting it to work with the right icons?

Hi,
Thanks for the tip, it's really useful! I wanted to customize the plugin but didn't have the patience to go through all the registry.
Twp questions though:
- I made a shortcut for the calculator (calc.exe) but the icon is too big (both res. index 0 or 100 in calc.exe). Is there a way to scale it down, or a smaller calculator icon in another file? What's the "main" icon library for Windows Mobile (the equivalent of shell32.dll under Windows)
- I tried to make a shortcut to the phone application, but I can't find the exe file (the Start menu shortcut doesn't point to an exe file, but to :MSCProg?......). And I can't find the icon either...
Please help.
Regards,
Silviu

Hi silviu.h.
Which Athena device do you have, Advantage, Dopod or Ameo?

Hi, I have the HTC Advantage (not Ameo, not Dopod), and the vanilla french ROM.

silviu.h said:
Hi, I have the HTC Advantage (not Ameo, not Dopod), and the vanilla french ROM.
Click to expand...
Click to collapse
Thanks for the reply. That would explain why to a large extent it works on your device.
P.S. try \Windows\HTCICON.dll (I think that is the equivalent to shell32.dll)
Let us know how you get on.

Thank you for your answer.
The hack from mahjong works OK, except for the quirks I have already posted above (the Calc.exe icon is too big and I can't find the main icon store). htcicon.dll doesn't exist
However it's OK for Tomtom.
I'll keep you posted on my findings (I'm not giving up, I just have to go to bed )
See you,
Silviu

mackaby007 said:
No HTC Plugin on the Ameo Today settings menu either, but visible in HLKM...software etc...as the HTCHomeplug.
I can get some of my choice of programs in the TrayApplet, but not the associated icons!!??!!
Same as before when I tried. Anyone else with an Ameo who has had success in getting it to work with the right icons?
Click to expand...
Click to collapse
Yeah that was the reason for adding this to my note: "If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin..."
Only for HTC users I'm afraid.
Best Regards,
mahjong

mahjong said:
Yeah that was the reason for adding this to my note: "If you own a HTC X7500 Advantage (the HTC make of Athena or Ameo) then in the Today screen you got a plugin..."
Only for HTC users I'm afraid.
Best Regards,
mahjong
Click to expand...
Click to collapse
Well, you can simply enable it on the T-Mobile Ameo using the following Reg-Keys:
- Navigate to: HKLM\Software\Microsoft\Today\Items
- Create a new Key named: HTC-Homeplug (or whatever you like)
- Navigate into that key
- Create the following items under that key:
String: DLL
Value: htchomeplug.dll
DWORD: Enabled
Value: 0 (or 1 if you want to enable it directly)
DWORD: Flags
Value: 0
DWORD: Options
Value: 0
DWORD: Order
Value: 0
DWORD: Type
Value: 5
After doing the above go to your today-screen settings and the Homeplug plugin is there...
Cheers

I seem to have BOTH HTCHomeplug and Trayapplet on my Ameo
It seems that there is a today item [email protected] or something I can turn on/off that doesnt appear to do anything, I beleive this is turning on/off the HTCHomeplug.
Because Trayapp is already on, and overwriting the HTChomeplug you only see its icons, therefor the homeplug is hidden.
I will experiment with turning off trayapp then turning on the @home today item and see what happens, but it looks like a lot of the confusion for Ameo users is the fact both are installed.
I did a hard reset, and didnt fiddle with the home/tray stuff, so this is how the rom set it up!
HKLM/software/htc/HTCHomeplug
HKLM/software/htc/TrayApplet
Both have keys of (and ONLY of),
PowerIconSlot=0
RotateIconSlot=1
In them.
Under HKLM/software/microsoft/today/items/[email protected]
DLL=hztdplug.dll
enabled=0
flags=0
options=0
order=1
type=5

Pyrofer said:
I seem to have BOTH HTCHomeplug and Trayapplet on my Ameo
It seems that there is a today item [email protected] or something I can turn on/off that doesnt appear to do anything, I beleive this is turning on/off the HTCHomeplug.
Because Trayapp is already on, and overwriting the HTChomeplug you only see its icons, therefor the homeplug is hidden.
I will experiment with turning off trayapp then turning on the @home today item and see what happens, but it looks like a lot of the confusion for Ameo users is the fact both are installed.
I did a hard reset, and didnt fiddle with the home/tray stuff, so this is how the rom set it up!
HKLM/software/htc/HTCHomeplug
HKLM/software/htc/TrayApplet
Both have keys of (and ONLY of),
PowerIconSlot=0
RotateIconSlot=1
In them.
Under HKLM/software/microsoft/today/items/[email protected]
DLL=hztdplug.dll
enabled=0
flags=0
options=0
order=1
type=5
Click to expand...
Click to collapse
The T-Mobile plugin has nothing to do with the HTC-Homeplug. HTC-Homeplug provides the sam functionality as the TrayApp.
The [email protected] Today Plugin is only useful for T-Mobile customers as it provides functions for HomeZone users.
The dll name hztdplug.dll means HomeZoneTodayPlugin...
If you want to use the HTC-HomePLug plugin you have to create the registry key I've posted above.
Cheers

Ok, I dont want the homezone rubbish.
But im still stuck with both HTCHomeplug and Trayapp
How do I enable/disable the trayapp? That doesnt seem to have any today element to it. I cant get icons working at all in trayapp and wanted to try the HTCHomeplug as that looks a much more userfriendly app.

Pyrofer said:
How do I enable/disable the trayapp?
Click to expand...
Click to collapse
Go to HKLM\init
Delete the Launcher for TrayAp.exe. On mine it is Launch92...
Make a Softreset after you changed this setting and the TrayAp is gone.
Cheers

Thanks!
I now have the HTC Homeplug working, and the trayapp gone! W00t!
I like the bigger icons, and now I can edit them better im happy. Much nicer.

Anyone thought about coding a contol panel applet for this homescreen plugin??

Moskus said:
Excellent! I will try this!
When using TrueVGA, does anybody know a way of making the icons work? I see only 1/4th of an icon, and it's even the wrong icon. The only icon is the one for the Light Settings...
Click to expand...
Click to collapse
If you use combination of Spb pocket plus and Commmgrpro, you don't need to deal with these problems of wrong size icons in the comm manager and home plug. Both of these need not be used at all.
I'm yet to find a replacement for Spb GPRS monitor though. SPb GPRS monitor also have problem displaying in true VGA. There are some but they do not show the kbps figure - only the downloaded volume.

Shaping the cube with 4 sides

http://www.youtube.com/watch?v=LlRVh8oA1rw
With a registry editor ( http://www.freewareppc.com/utilities/phmregistryeditor.shtml ) in HKEY_LOCAL_MACHINE\Software\HTC\Biotouch we see the folders APLauncher + MediaHubMini. The first one it contains the regulations for the side of cube with 6 applications and the second one, the regulations for the side of cube with 3 applications.
Opening the file APLauncher we see at line, 6 files with name App0 - 5. Each one represents a button of cube, in the side with 6 applications. We are interested for the fields Name where we fix the name of application that will appear on screen and Path where we fix the path of application that we want to place.
In this example I have put the application Live Messenger changing string with \Windows\WLMMessenger.exe with preferred application. Attention, we needed exe no ink, that exist in windows folder or Program Files folder.
With the same way open the folder MediaHubMini. We see at line, 3 files with name App1_1 - 3. . Each one represents a button of cube, in the side with 3 applications. At the same way we make also here the changes that we wish. The field APNameFontSize it represents the font size.
http://www.youtube.com/watch?v=LlRVh8oA1rw
Here we see the final result. Next stage the change of our own pictures in each program, but most important is to have in the cube the applications that we want to have easy access with one hand. Most careful and those who have installed the HTC Action Screen will discover in the folder Biotouch and the corresponding regulations for this.
==========================
==========================
Another side with six applications in cube
1. In HKEY_LOCAL_MACHINE\Software\HTC\Biotouch add a folder with name APLauncher4 with the same content of APLauncher.
2. In HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Βiotouch add a String Value with name App4 and String APLauncher \Windows\APLauncher4.exe
3. In HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Βiotouch add a Βinary Value with name Cube4 with the same content of Cube3.
4. In HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Βiotouch change the DWORD VALUE Total Cubes from 3 to 4.
5. In windows folder make a new file with name APLauncher4.exe copy from APLauncher.exe
==========================
==========================
All that require big experience and knowledge and become more easily with copy, paste & rename.
Thanks to butzchan, atao, hawk eye tim.

Can I ever thank you enough?

Thank you so much Pano! This is a really great tweak!!!

Easier and more user friendly is carlos' touchsettings. can be found on www.fatattitude.com. Thread is somwhere in development here. No need to go to reg.

In my and some other devices, this application does not open.

weird :-( I have polaris (o2 orbit2) and works w/o probs. But i had to install cube from CAB (bloody f..ing o2 ROM) Hopefully soon will be some custom ROM

Isn't there a easier way
Thx.

I am old fashion man.

panosha said:
I am old fashion man.
Click to expand...
Click to collapse
Thanks a lot.. That's exactly what I need.. the old fashion way.
I prefer this method than installing a tweak program. Even installing
a program is easier, but I love this way..
Thank you..

Lets add another cube!!
I have successfully added another cube by making 3 regedits:
I added:
HKLM/Software/HTC/Biotouch/Biotouch--added REG_SZ called App4 (value data same as App3)
HKLM/Software/HTC/Biotouch/Biotouch--added REG_BINARY called Cube4 (value data same as Cube3)
Changed HKLM/Software/HTC/Biotouch/Biotouch/TotalCubes from 3 to 4
I now have 4 cubes, but obviously the added cube is a clone of the APLauncher (6 button) cube that already existed. My question is (being a newbie at this, and feeling like GT330 and panosha do) how do I change the new 6 APLauncher cube to display different programs?
Is it as simple as adding an APLauncher2 Key, values, etc in the registry??

I can't find a way to make it work.

panosha said:
I can't find a way to make it work.
Click to expand...
Click to collapse
I've added the 2 registry keys and modified the TotalCubes key :
Added HKLM/Software/HTC/Biotouch/Biotouch/App4 (value data same as App3)
Added HKLM/Software/HTC/Biotouch/Biotouch/Cube4 (value data same as Cube3)
Changed HKLM/Software/HTC/Biotouch/Biotouch/TotalCubes from 3 to 4
And made a complete reset, all is ok, i have a 4 Face cube, thanks to butzchan

Now lets get some help on changing the reg values to have 6 different programs on each of the APLauncher cubes, for a total of 12. I wonder if you copy the APLauncher reg values and rename the copied values APLauncher2, it will work. Anyone?

butzchan said:
I have successfully added another cube by making 3 regedits:
I added:
HKLM/Software/HTC/Biotouch/Biotouch--added REG_SZ called App4 (value data same as App3)
HKLM/Software/HTC/Biotouch/Biotouch--added REG_BINARY called Cube4 (value data same as Cube3)
Changed HKLM/Software/HTC/Biotouch/Biotouch/TotalCubes from 3 to 4
I now have 4 cubes, but obviously the added cube is a clone of the APLauncher (6 button) cube that already existed. My question is (being a newbie at this, and feeling like GT330 and panosha do) how do I change the new 6 APLauncher cube to display different programs?
Is it as simple as adding an APLauncher2 Key, values, etc in the registry??
Click to expand...
Click to collapse
nearly that simply
Create a new key by copying and pasting APLauncher i renamed the new key APLauncher4.
Alter the App4 string to 'APLauncher \Windows\APLauncher4.exe'
Then copy and rename the \windows\aplauncher.exe program to aplauncher4.exe
Then just alter the values to your requirement in the aplauncher4 key and reset.
Works a treat on mine.I now have another page with 6 fully programable buttons.

Great job.

Great find....

We can't have another side with contacts.

hawk eye tim said:
nearly that simply
Create a new key by copying and pasting APLauncher i renamed the new key APLauncher4.
Alter the App4 string to 'APLauncher \Windows\APLauncher4.exe'
Then copy and rename the \windows\aplauncher.exe program to aplauncher4.exe
Then just alter the values to your requirement in the aplauncher4 key and reset.
Works a treat on mine.I now have another page with 6 fully programable buttons.
Click to expand...
Click to collapse
That was my next step. Now it works great! Thanks dude!
I am guessing to get another contacts page, all you would need to do is follow the same steps, just with App1 as the base.
Time to edit the other 6 apps.

OK, here are the results of our work. I will try to gather all informantions in the first post. Thank you all.
http://www.youtube.com/watch?v=LlRVh8oA1rw

Nice!!!
This was nice. Exactly one of the improvemets of the cube was waiting for.

Please help - can't change the right softkey!

Hi guys!
I tried to change my right softkey from "Menu" to "BT Toggle" (a bluetooth switching program I've already installed) using Advanced Configuration Tool 3.3 but it didn't work on my HD2.
When I restart the HD2, the key is changed to "BT Toggle" but after entering the PIN and after HTC sense started the key is named "Menu" again.
I looked into the registry but all is right there, the changes were saved. But why is the new softkey name only displayed before starting HTC sense and not after?
Any ideas?
Best regards,
Oliver

Home RSK
I wouldn't mess with the right soft key of sense.
Only the left.
How would you edit the quick tabs?
If you aren't using sense, only the WM interface, you can edit those SK's.
Did you get BT Toggle to work?
It wouldn't for me.
Benz-Driver said:
Hi guys!
I tried to change my right softkey from "Menu" to "BT Toggle" (a bluetooth switching program I've already installed) using Advanced Configuration Tool 3.3 but it didn't work on my HD2.
When I restart the HD2, the key is changed to "BT Toggle" but after entering the PIN and after HTC sense started the key is named "Menu" again.
I looked into the registry but all is right there, the changes were saved. But why is the new softkey name only displayed before starting HTC sense and not after?
Any ideas?
Best regards,
Oliver
Click to expand...
Click to collapse

This one works with my HD2:
http://forum.xda-developers.com/showpost.php?p=4292054&postcount=11
Sorry, what do you mean with
I wouldn't mess with the right soft key of sense.
Only the left.
Click to expand...
Click to collapse
My english isn't that good...

Using this post by vovichek62 as a guide I used the following process to change the right soft key:
Download LuaDec from here and extract
Copy \Windows\07c67730_manila from device to luadec folder (and somewhere else as a backup).
Open a command prompt there
Run
Code:
luadec 07c67730_manila > 07c67730_manila.lua
Open 07c67730_manila.lua in an editor like notepad
You need to change two functions. The fuction above "SetSoftKey = l_0_0" sets the text for the soft buttons. This is my modified line:
Code:
_application:SetRightSoftkey(Softkey(Locale:GetString("IDS_CONTACTS"), OnMenuPressed))
I think it was originally set to IDS_MENU. That "OnMenuPressed" is the function called when you press it.
So now you need to change that function - The function above "OnMenuPressed = l_0_0". On mine this is now:
Code:
l_0_0 = function()
_application.Navigation:Navigate(URL("Manila://people/browserlayer/peopleAll.page"), false)
end
Now, back in the command prompt run:
Code:
luac -o 07c67730_manila 07c67730_manila.lua
and copy 07c67730_manila back to your device.
If you were up for it you could probably copy some of the left soft key code to allow changing the right soft key in the registry.
Xaddict is right, once you do this you can no longer tweak your home buttons. If I need to change one I go back in to the registry and find:
HKEY_LOCAL_MACHINE\Software\HTC\Manila\Home\0\IsSet (where 0 is the button number) and change the value to 0. If you then restart manila (or your device) you can change that button. It will still show the old text and icon until you do. I also made a simple .reg which clears all the buttons, attached. For me it was worth this hassle as I could remove the People tab.

Tx fot BT Toggle
Nice one.
Thanks very much : )
Benz-Driver said:
This one works with my HD2:
http://forum.xda-developers.com/showpost.php?p=4292054&postcount=11
Sorry, what do you mean with
My english isn't that good...
Click to expand...
Click to collapse

iv just made a new 07c67730_manila file that reads from the registry
so all you have to do is download my 07c67730_manila file
http://www.filefront.com/16489283/07c67730_manila
then copy it to your windows folder (backup the old 07c67730_manila file)
then in registry at:
HKLM > Software\HTC\Manila
Change:
HomeRSKPath
HomeRSKText
HomeRSKArguments
to anything you like
for contacts:
HomeRSKPath Manila://people\browserlayer\?.page
HomeRSKText anything you like something liek contacts or all people
HomeRSKArguments leave this blank
how to remove quick Links without the menu:
all you do is hold the quick link you dont want for about 3-4 seconds and then drag it away this works on my dutty rom but gessing its the same for all roms

I am using HD2Tweaks - beats the hassle of backing up/copying manila files, editing registry entries - to assign the left and right softkey at the Home/Today screen.
But the available options are a fixed set.
Telephone (default for left), Menu (default for right), Backlight, Contacts, Contacts List, Notes, Calendar WM, Calendar WM (week view), Calendar WM (month view), New Appointment, Tasks, Messaging, SMS/MMS, Internet, Opera, Camera, Album, Comm Manager, File Explorer, Google Maps, Internet Sharing, MyPhone, RSS Hub, Radio FM, Windows Live, You Tube.
http://forum.xda-developers.com/showthread.php?t=588652

HD2Tweaks does not work for me on duttys rom so if HD2Tweaks works thats grate but mine is like a backup option

Holding quicklinks for 3-4 secs dont work for me. I'm on 1.66 WWE stock ROM. Need help on how to remove quicklinks. Also does anyone know the path for New SMS on LSK or RSK? Thanks!