Is there a way to make the touch diamond look and run like the touch diamond 2.If so how would i do it?
you should flash a rom with TF3D2 and another tachi options !
you can find it in Diamond ROM development. I use Gen.Y D2 R1.2 and it works very well
yes u can... but its takes too much of RAM... And somethime apps like opera won't work...
I dont know what that means.
tom62's that is.
Related
Hi folks,
i saw some threads in the development section for manila 2d (which really looks cool). I'm wondering if this works on my HTC Touch!? I'm also not sure if there is a cab install version available - or is a rom flash needed (don't want to do that again...)
has anybody already some experiance with manila 2d?
thanks for any information!
you'll notice that there's a thread a few posts down with the Title "touchFLO 2D on ELF" this is the same thing as Manila 2D. It's a simple cab install and works just fine.
Just try it you will love it.
Looks good, but it doesn't work as it should. On my Elfin Audio Mgr 2 doesn't start, system runs veeery slowly even after uninstalling TF2D (hard reset helps) and cable is causing system freeze :/
just tried it and it really looks cool! It works without any problems...
Sad thing is, that its not working together with any other today plugins...
Install SecondToday:
http://www.chi-tai.info/cs_wm_tools_im_cs.htm
nuke1 said:
Install SecondToday:
http://www.chi-tai.info/cs_wm_tools_im_cs.htm
Click to expand...
Click to collapse
yeah thats really cool! I have mapped the app to my camera button and so i can switch very fast - perfekt
Touchflow 3D
I also have some problems with this panel, after I installed it to my Xperia I have serious problems, it's look great but it's very slow and after open a few other panels my phone just block, I've to reset the Xperia and then I can go on, so I deside to uninstall it but now way it stay's, and after looking in my installed programms it is gone??? I can't uninstall it and I suppose that the only sollution could be a factory restore. I'ts a pitty it don't work like it should be cause I find it a great interface so if anyone could give us some advise they're welcome. I did install the second little program tf3d_panel but even that bring it to full speed and error free
manila on htc touch hd
As the title says, i run on my htc touch hd. where can i find a tutorial on how to install manila on this kind of phone step-by-step ? (tutorial for noobs as you may say) I am totally away from this phone technology and i've found a lot of posts but for htc touch and not touch hd. i want to know which files i must install, where i find them and how can i change the theme. Please, help a noob
Atharia said:
As the title says, i run on my htc touch hd. where can i find a tutorial on how to install manila on this kind of phone step-by-step ? (tutorial for noobs as you may say) I am totally away from this phone technology and i've found a lot of posts but for htc touch and not touch hd. i want to know which files i must install, where i find them and how can i change the theme. Please, help a noob
Click to expand...
Click to collapse
Atharia,
Just as nobody has replied and I don't want you to be left in the dark
Have you checked anything in the blackstone forum? That would be a more appropriate place for you to be searching. I understand you may have search for HTC Touch, and that would probabaly be why you came here.
On the other hand though, I think you're phone may actually come with what had been ported to this phone - don't quote me on that but I am sure that it had touchflo as standard?
Stu
I have been playing with TouchFlo on my opal and installed spb Mobile Shell. I like the Mobile Shell much more than touchflo. But since it is built into the ROM, it makes the phone slow.
Is there any really light-weight ROM available for Opal? Without TouchFlo and other stuff?
If not, may be I can try to develop myself. Can you guys help me with some links to understand how it is done?
Thanks in advance...
hey my friend
idk why you hate touch flo but its great lol
anyway here what you should do ...
just click start - setting - today - items .. and dont cheak the touch flo so the touch flo wont work and your pda wont be slow just in case restart your pda aftere stopping the touch flo and if you wanted back do the same steps and re-cheak the touch flo
thats all you have to do
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
I am quite sure that WM 6.5 needs to be installed instead of WM 6.1.
About the Touch flo's im in the same boat... i just would like the "best" version as a panel. So thank you for bringing this up
Windows mobile is the platform on which all your programs run, including the panel manager and touchflo.
There's currently two* versions of TF3D, TF3D 1 and TF3D 2. Manila == TF3D.
The best and newest at the moment is TF3D2, as stickied, it has landscape support, but it also has a few bugs, as it's a beta build. All in all, it works more that good enough.
Best thing I can recommend is flashing one of itje's ROMS, preferably the new 4.0, which has TF3D2. This way, you'll have TF3D as your homescreen, but also the panels.
* Not including different beta's.
Alright thanks a lot, looks like I'll be installing that Touch Flo 3d2 ROM then.
Quick question though. Even if I flash this I'm going to assume I'm not resetting windows mobile since the xperia interface and touch flo 3d are just "skins" for windows mobile, so I wouldn't have to reinput all my settings?
When you flash your ROM, everything will be erased.
If you however just want to install TF3D and keep everything, you will have to wait for daran_clarke to finish his TF3d .cab, which you just install on your phone just like any application.
i recommend running TF3D2 from a rom, because the responsiveness and speed is increased alot. i recommend itje's touch it landscape ver 1.1 rom, as this is the most stable and normal version, as opposed to ver 4 which is lets say... a bit different. if you are intersested i will provide the rapidlinks to this no longer available rom
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
NiklasK said:
Already installed itje's V4 and am extremely pleased since it hasn't crashed yet. However I tried going on youtube and the video is really choppy and out of sync with the audio, which used to not be the case. Tested it both on wifi and edge and the data speed makes no difference. Any ideas?
Click to expand...
Click to collapse
Itje's V4 is (although the filename doesn't tell you this) still in it's beta stages. Some problems will still occur, but Itje is working on it.
That's the reason flext recommended you 1.1.
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
NiklasK said:
Am I supposed to have to reinstall the radio, because my EDGE has stopped working altogether since installing Touch Flo 3d?
Click to expand...
Click to collapse
Nope, that seems to be an unrelated problem. I've never seen reports of EDGE failing after TF3D installation. If the problem persists, you might want to try a hard-reset (also removing TF3D again).
flashing to tf3d 2 rom
iam kinda new at this and iam trying to flash to tf3d 2 rom because the theme that iam trying to get does not work with my stock rom..
NiklasK said:
So just got my Xperia the other day and am looking to make the jump to Touch Flo 3d. Looking on the forum here there's at least 6 different versions and I'm kinda confused on what the differences between these even are.
Can someone please clarify the difference between:
Touch Flo 3d 1
Touch Flo 3d 2
Touch Flo 3d HTC Blackstone
Manila
Manila Touch HD
Manila V2
I noticed that there's also a lot of confrontation between installing touch flo as a ROM or just running it on a panel from a CAB file. What are the advantages of either. If possible I'd prefer to keep the Xperia panels and just run Touch Flo in a panel.
Also while I'm at it since I don't think it's worth another thread, can I run the Windows Mobile 6.5 beta in a panel or do I have to install it and wipe out windows mobile 6.1?
Click to expand...
Click to collapse
TouchFlo 3D 2 works in portrait and landscape mode [latest version]
TouchFlo 3D 1 has touch flo tabs but only in portrait mode
Manilla is the TouchFlo cube [it isnt touch flo 3d at all]
Manilla HD is the same as Touch Flo 1
Manilla V2, I think is Touch Flo 3D.....
Forgive me for the guessing...I don't use touch flo
Hi guys !
Looking at new manila 2.6 videos on topaz and HD, from duttys new rom, can anyone port this so it would be available for HTC TOUCH DIAMOND ?
i would very like to use it, but i dont want to buy new phone at this point
thank you so much
2 nice reviews on the diamond 2 here from pocketnow,, looking forwards
http://www.youtube.com/watch?v=igRAl0swRsI
http://www.youtube.com/watch?v=ZZhI9myqjdo&feature=SeriesPlayList&p=52A0239A0BAF7295
Gregorius said:
Hi guys !
Looking at new manila 2.6 videos on topaz and HD, from duttys new rom, can anyone port this so it would be available for HTC TOUCH DIAMOND ?
i would very like to use it, but i dont want to buy new phone at this point
thank you so much
Click to expand...
Click to collapse
be patient, devs are working on it porting it. Nothing available yet.
this looks fantastic, they did great job on finger friendly thing buttons seems bigger and easy to press, i hope it'll soon release on our diamonds too...
but what about manilla 2.5?
I can't find any rom with manilla 2.5 for gsm diamond
csjneek said:
but what about manilla 2.5?
I can't find any rom with manilla 2.5 for gsm diamond
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=541026
just check this thread...
good luck
Manila 2.6 for HTC diamond 1
Hi,
is there a way to install the last version of manila (2.6) on my HTD Touch Diamond 1 (WM 6.1) ?
Thanks
ellaia said:
Hi,
is there a way to install the last version of manila (2.6) on my HTD Touch Diamond 1 (WM 6.1) ?
Thanks
Click to expand...
Click to collapse
Only by flashing this rom at the moment.
http://forum.xda-developers.com/showthread.php?t=565078
Does anyone know where can I get TouchFLO 3D 2.6 for Diamond 2?
I think the closest you can get is 2.5.
where can I get TouchFlo3D 2.5?
I am using Diamond 2 with WM6.1, does it able to install touchflo3D 2.5?
Kindly advise. Thanks!
try the sunx rom manila 2.5 (!!!!!!!!!!) .. available for 6.1 and 6.5 ....
testet both and atm i think 6.1 is a bit better in speed and less bugs.. but that's just my opinion and its just a quick check^^ ....
...test it by your own ... wont be emberrasing
This is the Diamond forum, you're better off in the Diamond2 forum if you own that device.
That said 2.6 will never work with any MSM72xx devices according to conflipper. It is made for the HTC Quillin which uses a different chipset and thus a different GFX chipset.
And don't follow the suggestions of these guys, you'll probably brick your Diamond2 if you install a Diamond ROM on it.
jep sry overreaded the "2"
I have a htc diamond 1 and I would like to put the touchflo 3d manila 2.6 does this version agree has my phone ?
bl996 said:
I have a htc diamond 1 and I would like to put the touchflo 3d manila 2.6 does this version agree has my phone ?
Click to expand...
Click to collapse
No.
MANILA 2.6 WILL NOT WORK WITH OUR DIAMONDS!
ok i got htc touch diamond updated to wm 6.5 but when i click on lanch htc sense it says unable where am i able to download it again?