Related
Hello, I've read a few posts that mention a GPS control panel, one in particular gave a registry change to enable it, so I popped into the registry to turn it on, but it was already on.
My question is where is the GPS control panel? I've got TomTom on the way, so would be good if it worked!
I'm running the latest Imate ROM on my Wizard.
Cheers.
start-settings-connections tab.
Sorry, I should have said, 'why isn't it there', not 'where is it', but don't worry, I did a search and found the answer - the first registry tweak I read didn't tell me to delete the 'redirect' DWord. Deleted it and it's appeared.
Can anyone explain why it's not there by default and if it causes any problems by being hidden like this with installing GPS Devices and Navigation software?
Is there anything else hidden that I might want to turn on?
Cheers.
I own a Magician not a Wizard. I also have TT with original TT BT GPS receiver and it worked straight out of the box - no registry tweaks.
paulrockliffe said:
Sorry, I should have said, 'why isn't it there', not 'where is it', but don't worry, I did a search and found the answer - the first registry tweak I read didn't tell me to delete the 'redirect' DWord. Deleted it and it's appeared.
Can anyone explain why it's not there by default and if it causes any problems by being hidden like this with installing GPS Devices and Navigation software?
Is there anything else hidden that I might want to turn on?
Cheers.
Click to expand...
Click to collapse
because it probably has no use with BT GPS systems. Its there because WM5 natively supports GPS systems that are built into the device, like the HTC Galaxy
Similar to GPS Gate
It's functionality (from what I've read) is supposed to be like "GPS Gate". The idea being you have one GPS receiver connected to your PPC, but you're able to "share" the GPS data with more than one application. I was only able to get it work properly with ONE piece of software (Mapopolis). You do not need it to run TomTom. I'm not sure why it doesn't work with other applications though. If I were you, I would not mess with it.
I have a hermes and wasnt to use PhoneAlarm to switch profiles depending on the cell that I am in.
I have got the app working but no cell information is coming up.
I did read somewhere that you have to change a couple of registry values to "de-restrict" the phone to allow this information to work.
Any ideas anyone?
Please let me know of anything else I can try to get this working....
Thanks
Mark
I havent done any reg tweaks to get it working...the location system must be enabled by ticking the box, then you must go through a kind of TRAINING period where you assign the cells you travel through to different locations, home...work etc..., in the automatic profile switching part of phonealarm (the orange icon in the profiles section) thats where you say what to do when you are in a certain location (again...home...work etc).
Works a treat on my TyTN.
P.S: You must have the full purchased version for it to work.
mrvanx said:
I havent done any reg tweaks to get it working...the location system must be enabled by ticking the box, then you must go through a kind of TRAINING period where you assign the cells you travel through to different locations, home...work etc..., in the automatic profile switching part of phonealarm (the orange icon in the profiles section) thats where you say what to do when you are in a certain location (again...home...work etc).
Works a treat on my TyTN.
P.S: You must have the full purchased version for it to work.
Click to expand...
Click to collapse
I have the full version. I am doing the following but it isn't showing an cell information:-
Under Options goto Addon
Select Location Service
Click Setup
Nothing displayed in Time/CellID or Group
Click Edit Groups
Click Groups drop down box - Nothing listed
Click Add, doesn't do anything..
I am missing something or doing something wrong. Surely it would pick up the cell that I am currently in?
Thanks
Mark
mdavenport said:
I have the full version. I am doing the following but it isn't showing an cell information:-
Under Options goto Addon
Select Location Service
Click Setup
Nothing displayed in Time/CellID or Group
Click Edit Groups
Click Groups drop down box - Nothing listed
Click Add, doesn't do anything..
I am missing something or doing something wrong. Surely it would pick up the cell that I am currently in?
Thanks
Mark
Click to expand...
Click to collapse
ignore previous email got it working just hadnt confirmed settings
this prog souns good could you post some more info and maybe point me to there home page
Thanks in advance
javaoverride2003 said:
this prog souns good could you post some more info and maybe point me to there home page
Thanks in advance
Click to expand...
Click to collapse
get to www.pocketmax.net. The latest version of phonealarm is 1.56.1
The location based switching doesnt work unless you pay for it. But its a great program i recommend buying it
http://www.pocketmax.net/phoneAlarm.html
thanks for the links guys
Hey Guys,
I posted this in the Kaiser thread. It works brilliantly on my Ameo too.
Here's the first post from:
http://forum.xda-developers.com/showthread.php?t=332324
--------------------------------------------------------------------------------
I’ve found a mint piece of software that no Kaiser owner should be without.
It comes with a trial period and u should check it out.
I was looking for some software that would help secure my phone and came across this. http://www.wimp-software.co.uk)
It’s supposedly designed to help you find your phone (yeh right, I aint gonna lose my £500 phone) but me and my mate have had a **** load of fun with it.
It’s pretty cool.
If you read the instructions, you can basically text the phone, but the other person doesn’t get the text message. The software grabs this coded text message and sends you back the gps position of the phone. It also gives you a link to google maps which is great if you’ve got Opera installed on your phone. (Don’t try PIE, it doesn’t work)
I gotta say, I’ve seen a lot of cool software around, but this one is SO cool. I only wish my girlfriend had a Kaiser. I could have so much fun with this.
The only thing I would add to the software though, is to know I was being WIMPED. Maybe a little SMS noise, or the icon changed or something, but I do suppose that it was written for phone theft. I haven’t tried it yet, but it also claims that if you change the SIM card in the phone it’ll SMS you with the number of the new SIM card.
this is a great find. thanks
Yes, this is a fantastic idea. However, the implication on our privacy is something to think about very seriously. Yes, it does protect our phone from theft and lost.
Can it be uninstalled or removed by a hard reset.?
Yes, it can be uninstalled, and yes it will be removed by a hard reset.
HOWEVER, pop it into your External Rom and the above two things become insignificant.
That's very true.
or cook it into a rom, doesnt help if they re-flash though...
Mobile Justice
http://sourceforge.net/projects/mjustice
Does the same, is freeware, works without problems on My athena WITHOUT bottom bar at 128 DPI (WINP shows no ICON)
The easiest way could be to cook it into a ROM and put the config file into an unlocked EXTERNAL ROM.
This is needed because a config file is requested, so, even if you cook mobile justice into the rom, you can't cook the config file (it needs your password, your SIM number and your phone number to report at..)
Then you can config your phone and even in case of an hard reset, without the thieft knowledge of the SW, it will restart and it reads the config file into the external ROM
Midget_1990 said:
or cook it into a rom, doesnt help if they re-flash though...
Click to expand...
Click to collapse
We would have to assume that 99.9% of the guy having our phones does not know anything about flashing. This is a reasonable assumption I think.
Having even 80% chances of getting back a lost phone is already not bad.
eaglesteve said:
We would have to assume that 99.9% of the guy having our phones does not know anything about flashing. This is a reasonable assumption I think.
Having even 80% chances of getting back a lost phone is already not bad.
Click to expand...
Click to collapse
Agree with this. Even having the config file on the MicroDrive might work, if this could be built into the ROM to look there by default. Don't know if that's possible. Yes, you could erase the Microdrive but this would take more research than the usual thief might be willing to make...
WIMP says it will send a Google Maps link, will Mobile Justice do that? Seems like MJ is actually more configurable.
wgary said:
Agree with this. Even having the config file on the MicroDrive might work, if this could be built into the ROM to look there by default. Don't know if that's possible. Yes, you could erase the Microdrive but this would take more research than the usual thief might be willing to make...
WIMP says it will send a Google Maps link, will Mobile Justice do that? Seems like MJ is actually more configurable.
Click to expand...
Click to collapse
MJ send GPS info in some formats, and have NO ICON on home screen. And a guy having in his hands a phone like this the first thing he search on google is HOW TO HARD RESET THE DEVICE Without a config file in ROM (on on microdrive I agree, but when you hard reset the ATHENA he asks "do you want to format the microdrive?" Having a stolen one the answer will be always YES!
Moreover is FREE, so I think no problems, asking to author, to put it into the ROM and to modify the registry key for config file to have it on external rom. The problem is.. could we have a PK3.0 with External Rom unocked as default?
sergiopi said:
MJ send GPS info in some formats, and have NO ICON on home screen. And a guy having in his hands a phone like the first thing he search on google is HOW TO HARD RESET THE DEVICE Without a config file in ROM (on on microdrive I agree, but when you hard reset the ATHENA he asks "do you want to format the microdrive?" Having a stolen one the answer will be always YES!
Moreover is FREE, so I think no problems, asking to author, to put it into the ROM and to modify the registry key for config file to have it on external rom. The problem is.. could we have a PK3.0 with External Rom unocked as default?
Click to expand...
Click to collapse
I don't recall being asked about reformatting the MicroDrive on hard reset... But having it in external rom would certainly be a viable approach. This would be a nice feature for PK3.0
Has anyone got MobileJustice working??
I can send a message but the GPS feature doesn't work. Anyone??
I tried mobileJustice and it didnt work for me either
wgary said:
I can send a message but the GPS feature doesn't work. Anyone??
Click to expand...
Click to collapse
So... I also tried WIMP and no love there, either. Even "heated up" GPS first. Thoughts, anyone?
wgary said:
So... I also tried WIMP and no love there, either. Even "heated up" GPS first. Thoughts, anyone?
Click to expand...
Click to collapse
WIMP worked for me second time out - had to increase the GPS timeout from 3 mins to 10 (I haven't yet tried any intermediate settings).
apd said:
WIMP worked for me second time out - had to increase the GPS timeout from 3 mins to 10 (I haven't yet tried any intermediate settings).
Click to expand...
Click to collapse
What settings did you use? I have x7500... Thanks!
wgary said:
What settings did you use? I have x7500... Thanks!
Click to expand...
Click to collapse
COM4, 38400, GPS TImeout 10, Max Satellites 6
The only way to works well it's integrating it in the rom, cause if its stolen the first thing that can do is change the rom
New Version on their website.
V1.2 includes various stealth options.
Wouldn't it be great if we could tell the program to draw the thiefs attention (eg an alarm) and when the person reacts to this alarm have it make a photograph with the front camera, which could be send through mms or e-mail... Then you would know who to look for when you arrive at the GPS coordinates with your baseball bat...
Hi all.
I have tried with different GPS softwares (PapagoX3&Vietmap), GPS clock are mysteriously one hour ahead of the current time (Device's time).
Could anyone suggest a solution to get a correct time in GPS?
I set clock as GMT+ 7 (Hanoi, Bangkok)
Help me, please. Thanks heaps !
Summertime?
Vampie said:
Summertime?
Click to expand...
Click to collapse
Maybe, but I dont know how to turn it off ?
Hey,
(Thinking it could be daylight saving time).
- I searched on the internet and I found a few things you could try. You could update your device with through this link:
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/daylight-savings-update.mspx
- You can try to put daylight saving time off in Outlook through
Tools | Options | Preferences | Calendar Options | Time Zone
(I found this on an old threat on the internet so I am not sure it will work, the link:
http://forum.brighthand.com/showthread.php?t=146800)
But before I continue is it the GPS clock or the whole phone? Did you ever connect the phone with a USB cable to a computer?
Grtz
Vampie said:
But before I continue is it the GPS clock or the whole phone? Did you ever connect the phone with a USB cable to a computer?
Grtz
Click to expand...
Click to collapse
Yup, its the GPS clock which is shown in several GPS map software I mentioned above. The clock of whole phone is still set correctly
I did try to disable my daylight saving time(DST) by "advance config tool" from xda - developer but its not the solution. >> do you think that GPS signal, its self, contains a time data including DST.
Infact, my local time (+ 7 GMT Bangkok, Hanoi) is not observed by DST but GPS clock still run as if the DST is applied, one hour ahead of local time
Hey,
I really do not have a clue what the problem would be. I thought that GPS just tracked location and not time. Anyway I searched on this forum with the searchkey "GPS TIME". Maybe the following topic is helpfull:
http://forum.xda-developers.com/showthread.php?t=321296
Grtz
Ps. I often update my GPS with the preinstalled ("quickgps")
Disable the auto adjust gps-time.
mirko.prinz said:
Disable the auto adjust gps-time.
Click to expand...
Click to collapse
thank you so !
But how can I ?
manooe said:
thank you so !
But how can I ?
Click to expand...
Click to collapse
In Settings from Navi-software. Maybe different in the Navisofts, for instance iGO in sys.txt or in Settings-menu, TomTom only in Settings-menu.
mirko.prinz said:
In Settings from Navi-software. Maybe different in the Navisofts, for instance iGO in sys.txt or in Settings-menu, TomTom only in Settings-menu.
Click to expand...
Click to collapse
unfortunately, both of my Gps software (Vietmap17, papagox3) dont have setting funtion for this. Hence I have to edit some registry info, dont I ?
Sorry, don´t know both GPS-Apps. Maybe a reg-setting or a config-file.
Can't you try to call the service centre of the GPS software? Even if it is illegal you can try.
Vampie said:
Can't you try to call the service centre of the GPS software? Even if it is illegal you can try.
Click to expand...
Click to collapse
Yup, they are legal sofwares, I called service centre of Vietnam17 software. However they dont know much, too disappointed. Maybe, I will try to email Papagox3 service center about my matter.
I applied all of the stuff mentioned by royalbloodvi in another thread here:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
So anybody, that finds those tips useful enough for him, should go with those. My problem was, that even when I applied all of the stuff, phone was still laggy, had some SOD's, sometimes turned off by itself etc. Since there is still no official note from SE about MR2, I was desperately looking for an answer. Creation of X2 subforum made my search easier, after browsing some topics, I gathered all the info, and to make it easier for you, I exposed it in this topic.
All the credits go to the topic starters in here, once again, I just gathered and compiled the info:
Xperia X2: How to change language (re-flash an Stock Spanish ROM), dreamcrawler for translation and originating tips, gbajzelj for the final idea and ultrashot and lollylost100 that provided the X2 software cabs.
***********************************
Procedure:
1) Open SEUS (SonyEricsson Update Service), start a new update. EVEN IF IT SAYS YOU HAVE LATEST VERS, UPDATE IT ANYWAY.
Another version: click on Start/Settings/System/Clear phone memory, enter all the needed info. It will put phone back into original state (MR1 - since you updated your phone to that version)
2) ONCE IT REBOOTS, CALIBRATION SCREEN APPEARS. RIGHT AFTER CLICKING ON THE CROSSES, IT WILL APPEAR THE SONY ERICSSON LOGO, AND IT WILL START APPLYING THE CABS. PUSH THE RESET RIGHT after it starts applying (hidden behind the stilus, opening the battery cover).
3) After rebooting, the Sony Logo will appear again asking to retry. Press NO. Well by default this will keep on showing up every time you restart the phone, and it will also reset your time & date setting to some time in March. But I found a solution for that. With registry editor of your choice, search for Launch190 (HKLM\init\Launch190\CustAppInstaller.exe). Delete that value, and phone won't ask you again if you want to retry the CABS instalation, also it won't change your Time & Date setting again!!
IMPORTANT: After that, phone returns to original WIN 6.5.2 state, without BUGGY SE stuff. At that point, phone is usable, stable and fast. You will have about 220 MB of free space on your phone.
Now you can go further by installing some of the SE stuff, but this is all up to you, since I don't exactly know, which one causes the problems (except for SlideView and TileWave panel, as was stated in some other posts). Grab the X2 Program cab's here: R1BA023_Original_Cabs
Put the extracted cabs on your SD card, insert it into the phone, and install stuff you want. I installed those packages:
SEMCFlashDeployment.cab
SonyEricssonDialer_1.1.0.996_vulcan_generic.cab -> New Vulcan Dialer
TaskManagerSetup.cab -> Task Manager, obviously
Camera_R109_RC1_38986.cab -> necessary for Camera
CommManagerCab.cab -> Communication Manager
FastGPSSetup.cab -> without this GPS won't work, at least did not work in my case
JMMS_Ver4.5.113_26Feb10_SE_PPC.cab -> reminded by rsx19, this one is needed for MMS
After installation of those, restart the phone. At that point around 200 MB of storage space is left, and around 120 - 130 MB of ram left. Although, it is not necessary to install all of those cabs (except for Camera, which I think is needed, unless you don't want to use camera ), it is all up to you.
Also, since you requested, I'll put down some of the cabs that are needed for different settings. But keep in mind, I am not sure if anyone of those cabs make any troubles or instability. So If you find any trouble or instability after some cab was installed, let us know and together we might find some useful solution.
Ok, to install some of the aditional setting in Setting menu, first install MyCPLSetup.cab, as I discovered, this one is neccessary for following CABS for various settings:
MobileData.cab -> for mobile data settings (HSDPA, ..)
ClearStorage.cab -> installs Clean Phone Memory
PhoneSettings.cab -> updates the Phone in Settings/Personal
SetupSNM.cab -> installs new Sounds & Notifications under Settings/Personal..
For the Illumination to work, install those 2 cabs:
IlluminationSvc.cab
PatternsSetup.cab -> SE Illumination Patterns, don't forget to restart phone after you install those two, and go back to Sounds & Notifications to set the illumination for various events.
After you install those cabs (not necessary to install them all, it's up to you) restart the phone and options will show up in Settings or desired category.
Don't forget, when you finish with installation of cabs, do a restart / soft reset of the phone, since some changes may not show until a restart / soft reset is done!
Using the phone with Windows Default theme, it runs smooth. Also battery life so far seems to be improved, but will have to run it few more days to tell the difference.
So far, my phone is lightspeed fast and, which is more important - stable!! You can now also try to apply settings, royalbloodvi provided in this thread - maybe you get even better performance:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
Ok, some are still having problems with SD cards being unrecognized or disappearing, here is the patch: SD Card Fix
Accelerometer based rotation:
If you loose the rotation during the setup of CABS, and you still want to use it, this is how you turn it back on: with registry editor open (HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled). If your rotation is gone, this key has the 0 value. Change it to 1 and you get your accel based rotation back. I have yet to find out, which cab disables it!
I'd like that you people give feedback in here, which CABs are safe and needed to install apart from those I (originally gbajzelj) posted.
PS
I personally don't like the idea of stripping the phone down to the bone to make it work. If you buy a new car, it works as it was send out of the factory..you don't need to unscrew half of the engine, disable the steering, take out the seets to make it work. Same is with computers, just everything. But until MR2 comes out and hopefully repairs all the damage that was done with MR1, this is the solution for me.
Also thanks to everyone helping to make this phone less bugy and somehow usable
lyteo said:
...
I also installed SPB Mobile Shell 3.5.3, which works flawlessly on this fresh install.
...
Click to expand...
Click to collapse
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
spasoft said:
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
Click to expand...
Click to collapse
Hm, I tried and my GPS was also unresponsive, so I installed FastGPS and it helped!
its gbajzelj not gbanzelj ) np.
When i installed spb 3.5.3 and reloded weather info then when i turned off the phone and turned it on again the weather data was not saved and the wireless or data conscction did connect but did not load no new data from weather server. Skyfire did load the pages (the connection i guess did work) but spb shell did not load the weather data anymore.
i would also like if anione can make the camera button to open the camera app withouth the slideview. maybe a simple cab file just to set the camera button.
Sorry for typo
Does it ask you every time you restart the phone if you want to continue with setup?
If it does, did you notice that it resets the date? Thats a problem I'm trying to solve now Every time my phone restarts, date is set to 17. March -> maybe thats why your weather data is not reloaded??
For me, when I press the Camera button it opens the CameraApp. I installed only Camera Cab as you sugested, no SlideView, and it works!
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
It think you have to install MobileData.cab & MyCPLSetup.cab
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
lyteo said:
Looking into your answer right now...remind me, in which menu that setting use to be, I forgot already...
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
Click to expand...
Click to collapse
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
royalbloodvi said:
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
Click to expand...
Click to collapse
About the Time & Date bug, I think every time the phone starts as after I made MR1 update...so we must somehow find what is telling the phone that the software is not installed (if we trick the phone that is was fully updated and will not ask for retry at startup, this date & time bug will probably go away) - solution found, check first post
About missing things in Settings, I think it is all connected with MyCPLSetup.cab solution found, check first post
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
rsx19 said:
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
Click to expand...
Click to collapse
You don't need to reinstall, just check the first post, I updated it with solution for that - you just have to change one registry setting!
For Sound & Notification settings install SetupSNM.cab! For the Optical I have yet to find out, I'm doing my best, but can't be that fast I guess I did about 10 reinstalls and about 100 restarts of the phone today
awesome, do you know which one is auto time update
rsx19 said:
awesome, do you know which one is auto time update
Click to expand...
Click to collapse
You mean the Timezone tab in Phone settings? When it automaticly changes time due to time zone change?
In this case it would be:
TimezoneSvcSetup.cab
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
rsx19 said:
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
Click to expand...
Click to collapse
Maybe you know where that Auto Time Update setting was? And if you restarted the phone, after installation?
For the Illumination, check first post
Thanks for the reminder on MMS, will add it now!
For the settingspart1 & 2, I have to check don't know yet
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
X2 phone Signal Pick up Weak
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
rsx19 said:
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
Click to expand...
Click to collapse
Did you went back to the Sounds & Notifications and selected vibration? Becouse at the moment, only cabs I have installed are:
MYCPLSetup, SetupSNM, IlluminatonSVC and PatternsSetup, and illumination & vibration works for me. Or do a soft reset again, it might help.
nguyennghiep said:
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
Click to expand...
Click to collapse
Hm, don't know what your are your signal conditions with other phones, mine has a good signal and it does not matter, what I install..
illuminations work and all the settings are set, but still no vibe.