Unlock EXTROM? - Touch CDMA General

Anyone know if it's possible to unlock the EXTROM on the touch/vogue/xv6900? If so can you point me int he right direction? I tried searching but everything I found was for the xv6700, which doesn't appear to be compatible with the 6900.
thx.

Related

Remove Simlock

Hy!
Does anybody know wich way the SIMLOCK works?
Is it a software (Rom) or part of the GSM module? (Firmware?)
Please post informations if available ...
Thanks :wink:
Ever heard of a little thing called "Searching" ?!
Check the wiki link on the top left of the page..
XDA unlock tool..
The little thing ...
This explains how to unlock the older devices ...
But i cant really understand how the LOCK really works.
Is the lock is in the radio bootloader - right?
And is it possible to change the code from a unlocked device
to a locked once?
I offer German T-Mobile ROM image - if anybody needs ...
(From a locked once, or a non locked device!)
Greez

Cingular CAB Files, Please

Hello everyone, I have lkooked through this forum for the past few days trying to find the Cingular CAB Files, so I can download them. If anyone can point me ot the right place and or link, I would greatly appreciate it. I have the ROM and tried some of the tools posted all over this board, but was unable to get to them. I have an iMate K-Jam with Rom 2.x, so I am unable to use the CID unlocking tools in order to use the Cingular ROM and I can not downgrade to the previous Imate K-Jam ROM either, so I have tried everything I knew how to do. Again, I would appreciate it, if someone could please post or point me in the right direction for the Cingular 8125 CAB Files. Thanks
Try this:
http://forum.xda-developers.com/viewtopic.php?t=45295
THank you, yes, I have looked a thtose pages you posted in the link several times, however, there are still no CAB files for Cingular, yes they are baked into the ROM update, but I can not update since CID unlock does not work on AKU2 ROMS and I can not downgrade either. So what I really need are the Cingular 8125 Extended ROM Cab files.
Why can't you downgrade?
http://forum.xda-developers.com/viewtopic.php?p=271614#271614
Here's the original.
I am using an unlocked cingular 8125...if i use that updated cingular rom, i cant use an unlocked phone anymore?
whats with that? if its correct?
Some people say that when you upgrade to AKU2 the phone is locked again and you cannot unlock it. Some people also say that you can unlock it prior to AKU2 and it will remain unlocked when you upgrade.
Thank you very much rumpnet, I appreciate your help.

SPV M3100 - can I de-orange it?

Hi,
I have just baught a HERMES (SPV M3100). Orange has set it up so I cannot use many websites (googlemaps etc). What do I need to de-orange it?
Also - can I get a new active sync? (the one that came with it doesnt sync contacts and doesnt sync with microsoft outlook).
I think maybe I need to Cook or flash my HERMES?
Sorry that these are basic questions. I have read the Wiki, but am no familiar with al the terms.
appreciate any help or just a pointing in the correct direction
Thanks!
Scot
I can suggest you to search the forum
You can use the search function inserting any of the questions you posted above.
I got an SPV M3100 and I flashed it with various roms.
It's a simple process if you follow ALL the rules.
you can start from this page:
http://www.mrvanx.org/hermes_guide/schap
Following this guide you can unlock your device and flash new roms
I can help you if cannot find what you want here in this forum
You're welcome
unlocking
Thanks for that link Elehicmo,
It is very helpful for me a (complete novice).
So to unlock a device I need to Flash HardSPL which is a modified bootloader ? (have I got these terms correct)?
If I stop after the flash Hard SPL stge will I have the same device as before, unlocked?
Few things I wasnt sure about, after reading the site:
"If your SPL version is 2.10.olipro then you ALREADY HAVE HardSPLv7. You do not need to flash it again."
How do I know if my SPL version is 2.10.olipro?
This step is not mandatory but if your radio version is "1.20.31.10" or below
How do i know if my radio version is "1.20.31.10" or below
Can you give me any suggestions as to whether Full, medium or vanilla version of Dutty WM6 v2 would work the best for me - I do not yet have memory storage but I wouldn't want to miss out on key features of WM6
Many Thanks, appreciate any direction with these questions.
Scot

t-mobile MDA III and upgrading windows.

Apologies if this has already been posted somewhere, I did look and couldnt find anything that helped.
I have the above device, and it has Windows Mobile V5 installed. if I managed to get this unlocked (the sim lock) by t-mobile, is there a way I can upgrade to Windows Mobile 6?.
Do I have to get it unlocked to be able to upgrade to WM6 ?
and whats the advantages of WM6 over 5? and will tom tom navigator still work on WM6?
Sorry, so many questions..
Try search it may be useful... all the answers are on this forum.
>>> Sjaool
I'm not sure if you have read my posting properly.. I did say
"Apologies if this has already been posted somewhere, I did look and couldnt find anything that helped."
and have searched again, and still didnt find the answer, so if someone could please help me I would be very grateful.
No need to SIM unlock. Just Read up on USPL, it's a CID unlocked state you need, which is different.
Once you've run USPL successfully, you can flash any WM6 ROM of your choosing.
WM6 is faster than WM5, prettier, and generally an upgraded feel, and yes Tomtom still works.
many thanks, I'll have a look into USPL, and then its just where to find a WM6 rom for T-Mobile UK.

witch one is right

right i'm a newbe as everyone says, but can some one give me some info.
is this right or wrong, i have a o2 xda mini s now can i put a t mobile rom on to it or has it got to be an o2 one
if i can not do that then can i put one on that someone has made like blackdiamond.
by the way it's a g4 2.21.0001 gsm 02.07.10
any HELP would be very greatfull tar
If you haven't done anything to your O2, it means it's CID (carrier-ID) locked. This means that only O2 ROMs will work. However, there is a way to get around the CID lock. I wrote a guide especially for newbies like you. See my signature for the link. Have fun!
Thankyou evilmonkey very helpfull

Categories

Resources