Hi,
I don't know why or when but my home key is not working anymore.
Is there any fix change in the registry to bring the home key comand back to default?
I'm using Dutty V3.3 ROM.
Thanks in advance
Well, I have find the problem. I have uninstalled S2U2 V2.01 and now I have the home key working again. Does any one have a solution for this?
Maybe this post should move for the S2U2 thread.
Thanks in advance.
Yes, same here.Wish I'd read it before I did the HR! :-(
Thread closed
Ask query in S2U2 thread
Related
Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)
any chance to change the hold red button? ive been wanting to remove the keypad lock and change it into s2u2.. so far no software can do that
patch does not work
Well, it works in my case
edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?
None I'm aware of...yet. Patience
It's great stuff, work fine BUT
"Start Hold" is not working on my BKHE1
can't install this on my J2/I2 version i780.. something about system permission in the installer cab.
_TB_TB_ said:
Hello...
A small app in attachment. It SHOULD add possibility of configuring 3 more buttons
of any WM6.1 Samsung SGH-i780...
Unfortunately, only application shortcuts may be assigned (namely no <command> commands)
Click to expand...
Click to collapse
Good Work!
ejoya said:
edited a few things in cab to allow installing.. now it works!
thanks _TB_TB_.. this is a great addition
still asking if its possible to also change the keylock on the red hold button?
Click to expand...
Click to collapse
Hello.
Can You post that changed cab (of course with TB_TB_ premission)? I have also problem with installation (lack of permission). Maybe it`s a problem with my official I1 WM6.1 ROM?
I have found that Your CAB can be installed, but there is some conflict with RealVGA, becouse without RealVGA it instals and run properly, but after instaling RealVGA system don`t permit to install it.. Weird..
WM 6.0
How to install on WM 6.0?
Best regards.
thank u for this fantastic hacks!
never try this patch to russian layout+EFN 5.0 - cos u you will need to hardreset.
Nice Hacks
Thank you, for the hacks
I'm also getting the permission error whenever I try this. I'm using EFN's 96DPI 5.0 Standard ROM. How do we fix that? I would really love to be able to change the End Key Hold short cut to point to the regular task manager 'cause the Samsung Task Manager looks funny when used on a 96 DPI ROM.
Thanks!
*nevermind - problem solved*
Can someone please post solution for the permission problem? How did u fix it?
Author please post solution to fix permission issue.
Thx
Please Vote : http://forum.xda-developers.com/showthread.php?t=923045
and reply too ! thanks
Hi all:
Seeking some help regarding the keyboard fix for tilt2. It was working fine for me when I use one of the official EUR 6.5 ROMs. I just flashed to a 6.5 WWE Hong Kong ROM with CHT and the cab is not working. I believe possibly because of the different IME for Chinese or the newer version of the ROM?
Instead of a cab is there some keys I can change/add to registry to fix that problem? It's driving me crazy not able to type properly...
Thanks in advance!!
I eneded up using the hwkeyboard cab to get the right FN and shift key....then I added takrim's keyboard control and reassigned all the keys to the correct place. Here's the XML file you can load to get all the keys...unzip and open keyboard config -> load -> and choose the xml file.
thanks for the xml, im having an issue with my numbers and symbols not working and this one seemed to remap it correctly when i put it into the keyboard config. However, the OK button is the FN button, and the FN button is caps lock, and im not sure what the capslock/shift button does (but it doesn't do anything when i press it)! . Is there a way to swap them in the config? i tried to do it myself but could only find how to create a rule and i dont think thats correct. Thanks!
install Toleraen's Tilt2KWKeyboard cab....for my initial testing it fix the FN and shift key but nothing else...
so now I have both the hwkeyboard cab installed - to fix FN and shift. Then use keyboard config + my XML for the rest.
Give it a try
Again. All the stuff you need.
I have downloaded these three files, but I do not know how to load them into my Tilt2. They don't unzip to .cab files. Could anyone help me with some instructions here?
Thanks in advance
RQDHD2 cab
Iam now using this fix and it worked for me and i can still sync with outlook
When i use HW keybord SIP keybord wil also hide
Works beautifully, thanks!
I got to modify your 'Keyboardconfig.xml" one-by-one as it is not working for mine. This may due to different ROM version. Anyway, attached my copy of .xml file & I'm using WME version of ROM. Hope this help those having same problem.
Hey there
When i swith on my HD2, I don't have anymore the slide2unlock screen. I'm directly on the welcome page
I lock my phone manually, but it doesn't work anymore automaticly
Any idea to restore that ?
TY
sorry all, you can close this thread
I have the lockscreen back thanks to BSB tweaks
I used the search funktion and found couple things (Personalizer 2.0 and Op Mon) regardings this.
After a soft reset the operator name changes back to the original.
Is there way to keep the changed operator name even after a soft reset?
I would appreciate a lot, if someone could help.
cheers,
timsah
Hi,
I wanted that myself. I searched and Personalizer works for me perfect. After softreset aswell. No idea why it not working for you. Check windows/start up folder, maybe its not starting after reset.
http://forum.xda-developers.com/showthread.php?t=426673
The reg setting should be in HKCU\Software\HTC\Manila\OperatorName
@artukas613
Thnx for the link, i tried with Personalizer 2.0 and didn't know about 3.1
Now it works even after Reboot.
@Bruce Inman
My ROm is without Manila.
I tried with HKLM/System/State/Phone/CurrentOperater. After a reboot the change is gone.
thanks guys,
timsah
have you tried cookie's home tab editor ? the editor has a simple name change function
Lazy-eye said:
have you tried cookie's home tab editor ? the editor has a simple name change function
Click to expand...
Click to collapse
Hi, thank you for the suggestion, i am using a rom without Manila in combination with Spb Mobile Shell, so no need for co0kie's Home Tab Editor.
Everything works fine with Personalizer 3.1 anyway.
Guys,
I'm new in this forum so I wish say hi to everybody...
Then, I have an HTC diamond 2 (original rom) I've searched for the topic in the forum and I found just a solution working in my phone.
http://forum.xda-developers.com/showthread.php?t=515808&page=3
I've downloaded the cab and everything is working fine, but, because on soft reset all the values return to the original one I'm forced to install the cab everytime, so it should be easier to create a button that is going to modify the following parameter in the registry:
[HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001
Is it possible? There is someone helping me?
I have to keep on the wifi in order to use my voip...
Thanks in advance,
Markuz
You can export that registry key and just insttall the registry instead of the cab if the settings aren't sticking.