Related
I already started this at the end of this thread:
http://forum.xda-developers.com/showthread.php?p=1881093#post1881093
but now I'm in real trouble so I'm starting a new thread hoping for help.
I was using 3.16 ROM on my mogul and all seemed fine until today I got an authentication error while voice roaming(edit: I said data roaming initially by accident). I called sprint to get an HLR reload becasue the above thread indicated this was helping people.
My phone quit making calls and quit data connections. Data ended with "cannot connect for unkoww reason". Calls simply disconnecte imediately. I could call *2 though.
Sprint had me rest my phone a few times and the checked the MSN/MSID info (which was fine) and evenutually sugestet I try the official rom (yes I was honest with them). I tried this, flashed 2.17 same deal.. after an hour with a tech he eventually told me the 2.17 is an "upgrade" rom and that it won't overwrite everything and that I should reload the original rom... so I just loaded 2.09.. checked MSN and MSID... in fact checked every setting in the EPST stuff against my touch. Everything is the same... except the security section (which doesn't exist on the touch) had the wrong username was my [email protected]nt... instead of sprint email) and some giberrish for a password.
I'm not sure what this should be, but actually I doubt it's the issue.
I'm stuck though. My phone is effectively bricked(it plays bubble breaker well at least) and I'm at a loss. Please advise if you can.
I just got off the phone with sprint. I have reverted to the 2.09 ROM. With the sprint reps help I did "master reset" which i didn't know existed. This is deeper than both a soft reset and a hard reset. It resets all the EPST data like MDN and MSID. We then set these back to what they should be. But no dice. She told me the phone radio must be broken and claimed that the *2 call uses a different radio. (really? does anyone believe that?) So her advice was to go to the repair center (which is 40 miles from here). OH.. and she put a diferent MSID which I find strange. It's no longer my phone number. I asked her if this was right and she said it probably changed when I asked for the HLR reload but that it was correct... weird. I'm in bad shape.
I called back becuase after forcing the phone to roaming I got an interesting message from verzion sayign they would transfer me to their operator where I could pay money to make a call... doesn't sound like a broken radio to me.
So I told the guy this but this time I got someone who knew what he was doing and before I could finish telling him about it he had it fixed. Aperently there was a setting in there system called HSA_Roaming_only that was set incorrectly and was forcing to try to connect to other networks. He checked it (I think.. or maybe unchecked it..) and voila... after several hours and three roms... it works.
The same thing happened to me when I did an HLR reload. I called sprint and told them my symptoms and they fixed it within 3 minutes. I didnt reinstall anything. You got totally whored by sprint, I feel for you.
dagurasu said:
I called back becuase after forcing the phone to roaming I got an interesting message from verzion sayign they would transfer me to their operator where I could pay money to make a call... doesn't sound like a broken radio to me.
So I told the guy this but this time I got someone who knew what he was doing and before I could finish telling him about it he had it fixed. Aperently there was a setting in there system called HSA_Roaming_only that was set incorrectly and was forcing to try to connect to other networks. He checked it (I think.. or maybe unchecked it..) and voila... after several hours and three roms... it works.
Click to expand...
Click to collapse
Did this allow you to EVDO roam? I cant data roam on EVDO and my girlfriends phone can. She is on the 2.17 official and i am on the 3.17 unofficial.
dagurasu said:
With the sprint reps help I did "master reset"
Click to expand...
Click to collapse
How do you do a master reset?
In the end I did get everything working again. I did get voice roaming working on 3.16 and I do have 1x roaming. I don't believe I have evdo roaming, but I probably won't know for sure until I go into work tomorrow.
I don't think the master reset was needed in the end.. but I could see that it might help someone someday. There is I think a ##something# code to get to the full epst settings, but I just go to \windows\EPST.lnk (edit: this is wrong.. see my next post)
Run it, select edit.. enter you MSL.. please don't ask how to find it.. search. Then under the menu tab... right soft key there is a reset option that I never noticed before. This will reset all the radio setup options to some default values and will do hard reset... erasing your data as usual. I have no idea where these defaults live on the phone... It seems like some roms end up changing at least the MSID and MDN, but some don't. I don't know what else they might change or how they affect what the defaults are that this resetting does.
In summary to my issue, there were two problems:
1) MSID was changed (during the hlr reload) in sprints system to something other than my phone number, (and now it likes to go back to phone number in my phone during upgrades thus not matching with what sprint has)
2) the HSA_ROAMING_ONLY flag in SPRINT's system (not my phone) was set wrong.
You got totally whored by sprint, I feel for you.
Click to expand...
Click to collapse
oh well.. not the first time.
dagurasu said:
In the end I did get everything working again. I did get voice roaming working on 3.16 and I do have 1x roaming. I don't believe I have evdo roaming, but I probably won't know for sure until I go into work tomorrow.
Click to expand...
Click to collapse
keep us updated on the evdo roaming. this is a big deal to me and i hope this isnt like this in the final version of the rom...
First.. I'm wrong about the reset.. it seems you must do the ##something# to get the epst that has the reset option in the menu tab. Opening through the windows link doesn't give that option. (edit: it's ##786#.. some googling found it.. doesn't seem terribly common information though plus google won't take "##".)
I am not getting evdo roaming and I'm pretty certain there should be verizon evdo coverage here... in fact I occassionally see the evdo symbol briefly when I switched to forced roaming, but it goes away immediately.. I suspect it doesn't authenticate.
Being that verizon seems to have much more evdo coverage than sprint, and that they make like $40 a month off their own customers for access to it(last I checked), it wouldn't be at all surprising if sprint can't pay/provide them enough (with all these sero plans) to get them to allow it. But I speculate.
Did anyone ever have this working? I never did.
well mine wont evdo roam on the new leaked rom. But my girlfriend has the same phone in the same house with the 2.17 rom and can evdo roam just fine... so it is baffling me
Something about the new rom is causing the problem, because having these two phones side by side and them acting differently is strange. mine also roamed fine on evdo before i installed the leaked rom btw
Everything else seems to function as normal, but the no evdo roaming is driving me mad. i really hope this isnt an issue in the official rom when it comes out.
we are also both on sero plans and roaming on alltel towers here.
Masater Reset Code
in order to do a master reset you need your MSL# then type ##MSL# and then you can do the master reset this will reset everything and i mean evereything to factory defaults. you will have to go through the sasme initial setup as when the phone was activated the first time. so make sure you have all your correct MSN/MISD numbers
tlhop911 said:
in order to do a master reset you need your MSL# then type ##MSL# and then you can do the master reset this will reset everything and i mean evereything to factory defaults. you will have to go through the sasme initial setup as when the phone was activated the first time. so make sure you have all your correct MSN/MISD numbers
Click to expand...
Click to collapse
Hmm .. when I go in there I still do not see where I can do a master reset. All I can do is change the MDN and MSID and then select OK.
Cool. I haven't been able to roam on Verizon's towers since I added the leaked ROM either. If I can manage to get through to tech support (the CSR in chat said she couldn't help me) I will have them reset the HSA flag to allow high speed digital roam.
well mine wont evdo roam on the new leaked rom. But my girlfriend has the same phone in the same house with the 2.17 rom and can evdo roam just fine... so it is baffling me
Click to expand...
Click to collapse
I'm on sero too, but again it's verizon roaming here.. so may be related to why it never worked for me in the first place. You could dare to just call sprint and ask why it's not working.
tlhop911 said:
in order to do a master reset you need your MSL# then type ##MSL# and then you can do the master reset
Click to expand...
Click to collapse
This is wrong.. this won't get you there, at least not on my phone.. and actually you DON'T need an MSL... BUT you better have it handy to fix things after you do the reset.
Just do ##786# as I stated above (sorry for the confusion the first time) and then look in the menu soft key.
EDIT: After you do the master reset... then you can do the ##MSL# and fix your MSID and MSN to what they should be.
To neodorian... please read what I wrote... this flag DID NOT do anything for my data roaming (and I am in verizon territority) This didn't even fix the usual voice roaming problem as far as I can tell (that's something else unknown which is fixed by the HLR reload, this only fixed my rather unusual problem where I could ONLY roam... and furthermore had to supply a credit card number to do so! This was something sprint broke for me just because they liked me better than you.
I had the authentication issue on my VZW XV6800 - I called in to tech support and after talking to the first person, and mentioning a HSL reset, she transferred me to level 2. The guy had me do basic troubleshooting, and examined some settings, then had me remove the battery for at least 1 minute. reload phone, try over the air programming, and test calls. all to no avail. he then had me go in and edit the settings using ##778 (VZW default password for editing is 000000) you don't need to use the hex code and program designed to give you the password, especialy since I tried this, and it didn't work.
Anyway, he generated a new A(uthentication) code on his end, had me manually input it, and he also had me change my Home SID/NID. Mine said 30/65535. He said it should be 30748/65535.
I then did another *228 #2 and was now able to make a test call. After hanging up I went back and looked, and the Home SID/NID #1 was 30/65535 again. Not sure if those extra numbers did anything, but the phone got rid of them.
I am able to call out and receive calls now, and the data seems to be zipping right along. When I tested gps last night it had me miles from where I was located.
UPDATE:
GPS seems to be working fine. I'm guessing the tower I was "connecting to" was miles away, since I live at the base of a butte, and have terrible reception. Most likely that WAS the closest tower to where my phone was.
I have spent so much time trying to hash out this problem,, and Im hoping the super gurus here on xda could help me...
What mechanism makes a phones ril,, "roaming indicator light" come on?
let me give a little back story...
Ive gotten a brand new qwest Mogul, and put all my alltel settings into the phone,,, phone and data work perfect,, but the ril is on... I checked fieldtrial im on the correct sid etc. but it shows digital roaming even though it is not...
I superCID the phone and flashed the stock alltel rom/radio from htc site, and redid the otap,, all works again,, but still shows roaming,
after a lot of reading, I have come to the conclusion that somewhere in the phone is a cic, or carrier identification code, that is stored somewhere in the phone,, possibly in one of the lower levels, this i speculate is used to match against the cic coming from the tower that the phone is connected to to tell if it is on home network or not...
I have searched through the phone endlessly, I have used qpst and made sure all my settings nam,hdr, etc all match my original alltel 6800, I have used qxdm to look at the rf nv, and browsed the full nv settings of the phone and cant find anything,, I took cdma workshop and tried to do an eeprom dump but was unsuccessful...
I have searched through the registry without luck,,,
What i am trying to do,, is not trick the phone into turning off the ril by hacking the registry,,,
I am trying to find within the phone where the actual carrier id is stored, so that it may be changed to my carriers id,,,
thanks in advance
Figured id give it one bump...
I am not a "super genius" when it comes to mobile phone technology, but I have a question for you:
Did you alter the ESN on the phone? I was under the impression that carriers own certain ESNs and to get on another network without roaming, you have to use one of that carrier's ESNs.
Is this true or just bull?
Also, I have read conflicting info on updating the ESN of a phone, but most agree that "cloning" a mobile phone is illegal. The fuzzy part is what counts as "cloning" a phone... especially if you own it.
Thanks.
no i didnt change the esn... alltel will gladly activate most phones... sprint and verizon just refuse to because they want you to spend your money buying equipment from them. I have never heard of a wireless company owning an esn. well ive heard of it. but dont believe it to be true. but with my case i just called alltel and gave them the esn of the new mogul and pow it was on..
well,, one last little bump wont hurt.....
Mine has the same problem. Did you ever figure this out? Mine is a Sprint Mogul flashed to Alltel with the correct PRL and all other settings duplicated from my old 6700.
FieldTrial.exe does show I'm connected to the correct SID so it's not really roaming, it just thinks it is.
Have you tried exporting QPST settings from your original 6800 to the Mogul?
You need to go into phone settings, under phone, and check your settings there. Roaming should be set to automatic, and not roaming only.
You can always choose Sprint only. (Quest uses Sprint's Towers) Good luck with your phone!
The latest ROM update for Alltel fixes this problem.
http://216.139.227.226/alltel/RUU_T...S_TITAN_03.37.20_Alltel_2.01_AM_PPST_Ship.exe
After flashing the new ROM, do a *228 and when the lady starts talking, press 3 to activate. When the phone reboots, the icon will be gone.
I've been searching and searching to see if there was a post about this already and haven't seen one. With every phone I had before my G1 I was able to send SMS messages during a phone call. Currently my G1 is not able to do so. Does anyone else have this problem? Has it been resolved? or Am I expecting too much from my G1? I have been on the phone with T-Mobile for 6 months now trying to figure it out and "engineering" has yet to come up with a solution. Any suggestions?
I think it might depend what type of service youre connected to....
I can send sms fine when I'm on the phone and connected to 3g. I'm using 5.0.2h build.
When you say "type of service" do you mean the fact that I have T-Mobile?
Sorry I meant whether or not youre on 3G, 2G, or just plain ol G.
Do you take notice?
Well I checked in the Phone Info and I noticed that once I get on a phone call my GPRS service goes from connected to suspended and sometimes disconnected. I am not sure why this happens. I also noticed that when this happens I will get the persons text message continually. My phone worked fine when I first got it. I also just rooted and installed the 1.5rev3. Still the same thing. Any ideas?
Did you ever install any of the radio updates through your rooting process
You said you're using r3 of ADP1.5.
You need to flash this radio update:
http://sapphire-port-dream.googlecode.com/files/ota-radio-2_22_19_26I.zip
Let me know if you already have....
Yes I actually did that radio update a few hours before you posted this. I am in the process of testing it. So far out of 6 tries I have only one successful attempt of being able to text while on the phone. I am going to run the update you listed and retest the phone just incase something went wrong during the installation.
Cool, lemme know how it goes.
Okay so here is the update. The phone is still doing the same thing. I say 50% of calls my GPRS Services goes from Connected to Suspended during a call.
Is this good? I know it should always be Connected.
Hello all! Its 'That Guy' Again
I recently bought a new HTC Vogue because my old one had *crud*crap*Stuff* on the screen. I called into Sprint customer service as always when swapping.
Everything seems to be fine. The phone is working. Texting is a-ok.. Data is a no-go.
This new Vogue ahs not been *modded*Tweaked*Flashed* (yet)
However when I launch an app to activate the provisioning feature, nothing happens. It dials the usual #777 and proceeds with the 'provisioning data services" msg. But after that it just disappears.
I dont not get a reply back or anything. If I try to refresh the browser to loop through it once more it just does the same thing over and over. Provisioning-----Then nothing
After 2 hours with customer service at Sprint we have gone through just about everything we could think of.. Still nothing.. The phone is practically brand new! Is there something im missing here? Maybe a bug in a certain version of the stock rom?
My old vogue provisioned fine previously and after I flashed to Froyo it was pure bliss.. However this phone will not take the data onnection O-o
If there is anything I can do/attempt to do id be forever greatful! And ill gladly donate my old Vogue to anyone who can use the parts.. It looks like super glue or something in a 3cm patch on the touch screen.. It still recognizes touch on ALL parts of the matrix, it just doesnt look pretty. The shell is kinda scuffed but over the phone works perfect =) This was one phone I didnt want to (ORD) to death.. Thanks in advance to anyone who gives insight on the issue!
Are you running on the most recent Vogue stock rom? which is 6.1
Yes =) Im running the Stock 6.1 Pro from from the HTC website
hexalot said:
Yes =) Im running the Stock 6.1 Pro from from the HTC website
Click to expand...
Click to collapse
I am not certain of what the Sprint rep asked you to do, but I have a feeling that your issue lies in the EPST programming. You are likely missing username and/or passwords under the Connections section in EPST. Give it a go and let me know what happens. If you need instructions, let me know as well...
I would be glad to take your old Vogue off your hands if you are serious about giving it away.
Sorry for the lateness! I did discover that she(the rep) had seriously messed up the epst settings in the phone, however after recovery still no data. Its almost as if the phone hates it lol. Eitherway in that case its not as useful as it could be. Ill really only bought the second one because it was new and i wanted the screen to be scratchless I dont mind sending you my old Vogue especially since youre already on the east coast lol ill log in again when i get back to the office and we can swap details.
Thanks again for you help!
hexalot said:
Sorry for the lateness! I did discover that she(the rep) had seriously messed up the epst settings in the phone, however after recovery still no data. Its almost as if the phone hates it lol. Eitherway in that case its not as useful as it could be. Ill really only bought the second one because it was new and i wanted the screen to be scratchless I dont mind sending you my old Vogue especially since youre already on the east coast lol ill log in again when i get back to the office and we can swap details.
Thanks again for you help!
Click to expand...
Click to collapse
There really are 3 or four things on EPST that you need to modify to get the device working properly (in most cases anyways): MIN, MDN, Username, Password, and maybe a couple of others to get better performance out of your connection (cycle, priority, etc). If you flash to stock, why don't you try to do *228 to do automatic provisioning?
Let me know when you want me to give you the shipping details for your Vogue. Thanks.
Only thing that pops in to my mind is that maybe you bought the phone off of eBay? Was it a "Sprint" branded phone, or like an Alltel or something that you activated on Sprint? I would imagine flashing the Sprint ROM from the HTC website would handle everything, but just as a shot in the dark, you could try to install the Carrier CAB (http://winbreak.com/winmo/voguegoodies) for Sprint.
NuAngel
@egzthunder1 Go 'head and pm the info m8! Sorry for the delay again im just hardly at this location anymore.
@NuAngel I actually bought the phone new from some rich guy on craigslist. It was flawless and my vogue had the previously mentioned "crap" on the screen.
It is branded Sprint and they activated the phone just fine as far text and phone. They are saying the data is active however no matter what rom/radio i use it wont access the data network. With WinMo it always says provisioning data but it never happens.. the browser goes idle. if i try to access any data apps it tries to provision but never seems to finish the job.. Android rom same deal just no provision of course. And as you know the Stock Sprint rom has also been flashed with no success of accessing data. Everything else works fine and i have the same service with my current vogue which works perfectly everytime.
If the data issue cant be resolved it will always make an awesome test device.. However, while I cant dig up anyone else having the issue, someone is bound to..
hexalot said:
@egzthunder1 Go 'head and pm the info m8! Sorry for the delay again im just hardly at this location anymore.
@NuAngel I actually bought the phone new from some rich guy on craigslist. It was flawless and my vogue had the previously mentioned "crap" on the screen.
It is branded Sprint and they activated the phone just fine as far text and phone. They are saying the data is active however no matter what rom/radio i use it wont access the data network. With WinMo it always says provisioning data but it never happens.. the browser goes idle. if i try to access any data apps it tries to provision but never seems to finish the job.. Android rom same deal just no provision of course. And as you know the Stock Sprint rom has also been flashed with no success of accessing data. Everything else works fine and i have the same service with my current vogue which works perfectly everytime.
If the data issue cant be resolved it will always make an awesome test device.. However, while I cant dig up anyone else having the issue, someone is bound to..
Click to expand...
Click to collapse
PM sent. Thanks a lot!
Whatever is causing this, after reading your explanation, now I am positive is in the EPST programming parameters. Android builds here have APNs for Sprint in there out of the box (no provisioning required). But to connect, it looks at the PST programming (just like WM does). I would try to speak with someone else at Sprint and see if they tell you something else. There aren't too many things that should be modified in there for the internet to work...
I have the Moto G4 Play (XT1607) (Harpia) and I have decided to flash LineageOS (lineage-14.1-20170131-nightly-harpia-signed.zip) on it using TWRP v3.0.2 r5. After getting it installed I noticed that it was not connecting to my 4g LTE Internet (I have Ting). So I figured I needed to make some changes to the APN settings. So I go to Settings>... More> Cellular Networks and the moment I click on "Cellular networks" I get an error message saying "com.android.phone has stopped". After reflashing and trying again a few times with the same result, I tried using a completely different ROM. AOKP. (aokp_harpia_nougat_nightly_2017-01-31.zip) and I ran into the same exact problem I was having with LineageOS.
I then tried to see if I could force my way into the APN configuration using an app called "Change APN". This worked, but now I see the message "Access Point Name settings are not available for this user". I decided to ignore this and click on the + to create a new APN. After filling the correct info out for Ting APN, I click on "Save"... and it doesn't save at all.
I decided to revert to the stock rom, and everything works perfectly fine with the stock rom. 4G LTE on Ting works fine. Whenever I try using a custom ROM of any kind, I run into the problem I described above. I don't know if I am forgetting to do something, or completely doing something wrong. I could use some help with this guys.
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
mkollersms said:
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
Click to expand...
Click to collapse
Yes. Ting is a Sprint service. Well either way LTE isn't working and the 3G keeps randomly turning on and off whenever I use a custom ROM. However, when I use Stock firmware, everything works perfectly fine. I am unsure what is causing the issue.
It seems nearly all custom ROMs at this point are having data connectivity issues. I'm trying to find a nandroid of the original xt1607 rom so I can just go back until its all sorted out.
mkollersms said:
Isn't Ting a Sprint service? I didn't think CDMA-based networks had APN settings to configure. Verizon and US Cellular have always used *22XXX for programming, as far as I can remember.
Click to expand...
Click to collapse
With Ting you can choose to use Sprint or T-Mobile. I am using the T-Mobile side of Ting and you do need to add Ting's APN settings for it to work. I am still on factory ROM but watching closely to see what others are experiencing with custom ROMs.
n76 said:
With Ting you can choose to use Sprint or T-Mobile. I am using the T-Mobile side of Ting and you do need to add Ting's APN settings for it to work. I am still on factory ROM but watching closely to see what others are experiencing with custom ROMs.
Click to expand...
Click to collapse
I haven't noticed any issue with my GSM ting service on lineage. I get LTE and the WiFi/LTE handoff seems to work. I don't install many apps and don't let them run in the background, so perhaps there's a conflict between them that's shutting down LTE service. This is just a guess.
Anyone have any information pertaining to this subject? I've searched hours on hours to no avail. I run U.S. Cellular and on the newest RR-5.8.1-OMS after I go to Settings>More>Cellular Networks>Crash. Every time. Resets my radio and picks right back up again. Everything works until I'm in my house, then I'm roaming and there's no way to manage in settings because of the crash.
I looked around in the file system and in /data/data/com.android.phone/ there is no files, no .db files or anything. I don't know of there's supposed to be either. But like OP stated, stock rom is flawless.
Would I be and to copy com.android.phone from stock and restore after flashing? I don't know what to do but this is with every single custom ROM out right now on every release. Data and everything works fine as far as I can tell but just no way to configure the settings. Any help would be greatly appreciated!!!
[email protected] said:
Anyone have any information pertaining to this subject? I've searched hours on hours to no avail. I run U.S. Cellular and on the newest RR-5.8.1-OMS after I go to Settings>More>Cellular Networks>Crash. Every time. Resets my radio and picks right back up again. Everything works until I'm in my house, then I'm roaming and there's no way to manage in settings because of the crash.
Click to expand...
Click to collapse
Just out of curiosity, have you tried the *22XXX thing yet?
EDIT: Just so we're clear, with you all who have CDMA phones, when you go into "IMEI Information," it does show both an IMEI and an ICCID, right? Because if not, I think I figured out why your LTE isn't working.
I tried, I tried dialing *22999 (guessing that the x stood for the 9 button in T9 language) and pressed the make a call button. Am I wrong about the "XXX" part? Because I did try that when I seen it previously in the thread earlier but had the same thoughts.
So to make that novel a shorter version, what exactly should I dial?
[email protected] said:
I tried, I tried dialing *22999 (guessing that the x stood for the 9 button in T9 language) and pressed the make a call button. Am I wrong about the "XXX" part? Because I did try that when I seen it previously in the thread earlier but had the same thoughts.
So to make that novel a shorter version, what exactly should I dial?
Click to expand...
Click to collapse
It depends on the carrier and the model of the phone. For most Tracfones, it's *22890. For US Cellular, I've seen it as *228 and *22894. You may have to call your carrier and ask what their phone programming code is.
Aaah ok I got you now. Yes I've tried that on nearly every ROM. Matter of fact I just noticed I posted a little off topic almost, but I'm here for the relevance of com.android.phone crashing EVERY SINGLE TIME I try to open Cellular Networks. The only ROM I will say it doesn't force close on is the Slim Nougat ROM, but I don't run that because instead of Cellular Networks settings making com.android.phone crash its when you place a call and then it force closes the UI part of the call but still carries the call through. I forgot to mention that by the way, whatever it is in Slim that is the making the different reason for force closing com.android.phone could probably be a pretty easy red flag for someone better equipped for this Lind of troubleshooting than myself!
Thank you for the suggestion though on the *22(8 in my case)
[email protected] said:
Aaah ok I got you now. Yes I've tried that on nearly every ROM. Matter of fact I just noticed I posted a little off topic almost, but I'm here for the relevance of com.android.phone crashing EVERY SINGLE TIME I try to open Cellular Networks. The only ROM I will say it doesn't force close on is the Slim Nougat ROM, but I don't run that because instead of Cellular Networks settings making com.android.phone crash its when you place a call and then it force closes the UI part of the call but still carries the call through. I forgot to mention that by the way, whatever it is in Slim that is the making the different reason for force closing com.android.phone could probably be a pretty easy red flag for someone better equipped for this Lind of troubleshooting than myself!
Thank you for the suggestion though on the *22(8 in my case)
Click to expand...
Click to collapse
After I posted that, I went back to try and see if Lineage was able to pick up my phone's MEID (even though I use a GSM SIM, the MEID is still tied to the phone hardware). For some reason, Lineage is not reading it, and I think all of your problems are being attributed to that fact.
The way CDMA phones work (and god, do I hate this), is your 2G/3G network is tied to the phone MEID, while the LTE SIM is data only. The OS needs to read both the 14-digit MEID (sometimes shows as a 15 digit IMEI where last digit is 0) as well as the 20 digit ICCID (SIM Number). A phone may also use the SIM number itself as an IMEI (BYOP SIMs do this) by dropping the first five digits of the 20 digit SIM number.
If you phone is showing only one 15 digit number in the system settings, then it's either the MEID OR the SIM, not both. So either you have calling and no LTE, or LTE and no calling. You can't program APN settings because the phone has no idea what ID number to tie APN settings to. This is actually a rather serious conundrum.
Ok ok, makes sense. I checked my Status info, every ROM has dual SIM capability by the way so I don't know if that would effect anything for xt-1607, but I looked at SIM slot 1 info and it reads my MEID correctly with 14 digits. I couldn't find anything about ICCID. My head pounding question here though, why in the hell (pardon the language) is everything flawless on stock, but on every ROM this problem occurs? Here's my next killer, everything works like it should for me, LTE, 3G, Calls, SMS/MMS, just can't change any of the settings due to a force close, AND I put my friends Straight Talk SIM in and it fired right up with no force close when going to change Network settings...?!
[email protected] said:
Ok ok, makes sense. I checked my Status info, every ROM has dual SIM capability by the way so I don't know if that would effect anything for xt-1607, but I looked at SIM slot 1 info and it reads my MEID correctly with 14 digits. I couldn't find anything about ICCID. My head pounding question here though, why in the hell (pardon the language) is everything flawless on stock, but on every ROM this problem occurs? Here's my next killer, everything works like it should for me, LTE, 3G, Calls, SMS/MMS, just can't change any of the settings due to a force close, AND I put my friends Straight Talk SIM in and it fired right up with no force close when going to change Network settings...?!
Click to expand...
Click to collapse
I think you just answered your own question. As stated in PCMag back in 2015, "Nobody makes a Dual-Sim phone compatible with Sprint or Verizon." It legitimately believes your MEID is a GSM-based IMEI, and is attempting to cross the streams, so to speak. And the only way your friend's StraightTalk SIM would work is if it was piggybacking off ATT or TMo's networks (the MEID would have been paired to the other phone causing a mismatch).
If you look at the stock ROM for this phone, you will see a BUNCH of system apps for programming Sprint and Verizon network information. They never made it into the custom ROMs we're using. FWIW, here's my thoughts on the matter. Someone needs to go back and make a single-SIM variant of these ROMs, as well as a flashable ZIP containing the necessary APKs for Android to detect the necessary information correctly. And if that doesn't happen, then everyone who bought an XT-1607 has to ditch their carrier and move to a GSM carrier.
That makes complete and total sense! Because I wasn't thinking this while time of it but I was in Oklahoma at the time where the main towers are AT&T, matter of fact Sprint and U.S. Cellular lose almost all signal right when you hit the county line where I was at. Verizon only gets signal because it's Verizon, lol. Reason I say that is because I was wondering why this whole time I has full signal with LTE coverage and completely list everything when I went hone, because where I live is complete opposite, there is hardly any GSM coverage, we don't even have an AT&T store, just Verizon, Sprint, USC.
So, with that being figured out, my laptop just recently kicked the bucket on me so I'm out for the most part, I do have a trick to swap files in and out of a compressed archive without extracting it in any way! But, it takes a while, not too much longer I guess but nowvi just remembered everything is pretty much .dat files so nevermind that.
Not that this thread isn't the most popular, but where would be the best place to take this request too to get the most attention from it? I mean if I had to go back to stock, so be it, but I'm a little spoiled to the custom life. Lol.
[email protected] said:
Not that this thread isn't the most popular, but where would be the best place to take this request too to get the most attention from it? I mean if I had to go back to stock, so be it, but I'm a little spoiled to the custom life. Lol.
Click to expand...
Click to collapse
IIRC, there is a Verizon thread with 80ish replies, but I think a developer like Squid might need to be made aware of this, so I might copy this into the Lineage thread.
A bit of good news. While reflashing all the time that were force closing when opening cellular networks, I looked in /data/data/com.android.phone/ and was looking, now remember to go back to that directory after I say all this, I found that directory was empty, on all of the Roms. Was curious so I flashed back to stock. Went to the same directory, BOOM! com.android.phone was not empty, in that folder I found 2 folders that were now populated with in:
1: (/files/ )I now had a file named carrierconfig-com.android.carrierconfig- (and after the dash was my ICCID number) so for this directory I need /data/data/com.android.phone/files/carrierconfig-com.android.carrierconfig**ICCID** (replace **ICCID** my ICCID number)
2: then there was this /data/data/com.android.phone/shared_prefs/_has_set_default_values.xml
and
phone/shared_prefs/com.android.phone_preferences.xml
These files are missing on all the Roms, I know this doesn't since everything, but I know for almost a fact it's a good chunk of something that needs to be available. Can I copy these files and move them into place, and set permissions how they were? I ran out of time tonight, and am busy all week so this is mainly for reference I guess. More research told me these files can be edited to change what is available to configure in cellular network settings like option to change from 2G, 3G, LTE, APN, and so on. Sorry for the mess, that's all I have for right now.
[email protected] said:
These files are missing on all the Roms, I know this doesn't since everything, but I know for almost a fact it's a good chunk of something that needs to be available. Can I copy these files and move them into place, and set permissions how they were? I ran out of time tonight, and am busy all week so this is mainly for reference I guess. More research told me these files can be edited to change what is available to configure in cellular network settings like option to change from 2G, 3G, LTE, APN, and so on. Sorry for the mess, that's all I have for right now.
Click to expand...
Click to collapse
That is definitely a major find! My only concern is even if you do that, there might be further missing components that would cause Dialer to crash on startup or some other wacky side effect. However, if you can make it work, then it's possible the proper APN settings will load by default and you'll no longer need to change them.
If you can, go into the System Apps on the stock ROM and look for any APKs branded by/with Sprint, VZW or USCellular, or anything CDMA related. They might be necessary for reading the SIM's ICCID.
That's what I was thinking too, and sadly for me I don't really know EVERYTHING to look for so it'll be mostly out of trial and error for me to figure it out. I wish they didn't compress Roms into .dat so I could use a root explorer to swap between tabs rather than copy, flash the rom, paste files and then if that didn't work start all over on restoring stock, so on and so forth. I miss my laptop. =(
Updates?
Has anyone looked into this further? I'm experiencing the same problem with the latest LineageOS nightly. US Cellular Prepaid with an XT1607.
I noticed that in my case i had to skip the Insert Sim thing on 1st boot. It never did whatever it wanted to there. (Maybe because I have no signal or weak roaming where I live?)
I'm seriously considering trying it from an area that I have good service in..