Hi All,
I have developed an application that enables two devices (i-mate PDA2 with Windows Mobile 2003) to communicate using TAPI over the GSM data channel (CSD line). Now I am planning to move on to i-mate JASJAM with Microsoft Windows Mobile 5.0 PocketPC installed on it (http://www.gsmarena.com/i_mate_jasjam-1589.php).
Does anybody tried TAPI data call on i-mate JASJAM? Is that successfull?
I am asking this because some newer hTC PDAs are not able to establish TAPI data call.
Kindly tell me if somebody has tries TAPI data call on newer PDA.
Asif
Related
Can anyone recommend Fax software that I can load onto my XDA II to enable it to sebd and receive faxes? I have a fax number that I had with Orange but O2 do not have the same facilities for fax so I have had to put the number on permanent divert to my home fax. Not good as I cannot read them when I am out on the road working. O2 refused to tell me any fax software as they cannot endorse any companies other than O2, and as O2 do not do the software I am stuffed! Any ideas?
KSE Truefax 2
Try KSE Trufax 2.06 for XDA II, at:
http://www.ksesoftware.com
(although it's not always working with me)
When I download will it wipe off anything I have on my XDA? I am very nervous about downloading stuff as I do not want to loose any info I have on my XDA. Thanks
You can download it and install it simply. It won't wipe anything. When sending a fax, the telephone function is automatically suspended, and, when finished, it goes on again. Sometimes, while sending a fax, the system hangs so you need to make a simple soft reset.
got the trial version can but says no carrier any advice ?
hi jus got the trial version of the sofware when i try to send a fax the program reports - dialing using internal modem - slight pause - then says no carrier signal ....... can you shed some light on this for me please .....
thanks heath.
problem sending faxes !!! solution
hi loaded the software as noted above but on trying out the sofware i kept getting the message no carrier i found some info on the kse website which told me to ring my provider and ask if the sim card was enabled for fax !!!
ang guess what yep i am now waiting for the settings to filter through the system.....
i will report back to this thread with an update in errrrrrr 12 - 24 hours...
reporting back !!!!
very impresive have had the trial version running and have used it succesfully many time to send as yet not received any still working on that but information i have suggests i again need to contact my provider to be issued with a fax number ???....... will keep you all posted. :?
Why we need a fax number from provider?
Why we cannot use a standard gsm number?
Anybody knows another software capable to receive faxes without a special fax number?
:roll:
I beleive you can't fax directly over GSM because it's a completely different set of communication protocols to fax. It's analogue for a start. GSM modems don't know about fax carrier signals etc. What happens when you get a fax number from yoyur provuder is this number goes to a box at your phone provider, which accepts fax protocols and converts things to go via a GSM data channel to your phone.
I wonder if a completely software fax solution would be possible, ie it opens the GSM audio stream and provides a software based implementation of fax comms. Probably impossible as even though anlogue fax and GSM audio are similar bandwidth (9.6Kbps) the GSM audio codec is geared to voice so wouldn't represent the fax singnal adequately.
andyclap said:
the GSM audio codec is geared to voice so wouldn't represent the fax singnal adequately.
Click to expand...
Click to collapse
Fax tones are specifically designed to work over voice systems....
(300 to 3.4K)
as these are the set limitations of earlier Telephone Transmission systems....(4 meg fdm & pcm)
Don't know a lot about GSM though..... :?
I tryied to connect my Qtek2020 with NEC616v via bluetooth, so I could use it as a highspeed modem with the mobile broadband. It wont pair either ways. The Qtek finds the NEC616v but when I press a pin code, nothing appears on the NEC, and the Qtek returns with a message saying that my pincode is wrong.
Has anyone any experience with this pacticular problem?
Thanks
Peter
Nokia´s or other mobiles that run Symbian operating system, is not working with the Qtek/XDA II Bluetooth at all. You can´t even send contacts...
Ive got reports of it working with some SonyEricsson mobiles, although, of course not the most popular ones (T610/T630).
I think the bluetooth compatability is really bad on the Qtek2020/XDAII.
Hopefully, this will be fixed in newer roms, or maybe Windows Mobile 2003SE, or Windows Mobile 2005.
not sure what this NEC616v thing is but i suspect if you want to use it for data transfer you'll have to get some sort of driver for the xda
Symbian phones works with XDA II
Hey
I got a Orange SPV M1000 with the latest firmware and I can easily send and receive files from a SE P900. When trying to bluejack I often see all kinds of phones altough I seldom try to connect to them. Make sure you have the 1.66 firmware as I have heard that the previous versions where weaker regarding bluetooth functionality.
Good luck
Johan
Hi!
Thanks...
But 1.66 only works with Orange and other specified operator images. My Qtek2020 is not Sim locked.... When I asked the Qtek support, they told me 1.66 was only for Qtek's with Orange or TDC images..
Hi all,
i'm developing an application that makes a data call over GSM network.
The data connection work fine beteween pda ipaq + gsm mobile via infrared and a qtek 1010.
My problem is that when a DATA call arrive to my qtek, a big "modal dialog" appear on the screen as happen when a normal voice call arrive...
This dialog is from the original phone program in pocket pc phone edition and cover all the screen so i cant answer the data call from my application...do u know how can i disable the phone program or replace it with my own application?
Thanks u
Fabio
P.s. i'm sorry my english is sooo bad!
hi everyone!
i've seen the same post ealier (~4 weeks ago) but don't found decision in there. So asking for again if somebody already found it.
Problem:
I use JAM as a GPRS modem via bluetooth. After voice call receiving JAM close both bluetooth and GPRS connection. So to contnue my work i have to reconnect manually from laptop
Before JAM i've used different phones by SonyEricsson (from T39) for over 4 years and hadnt never meet with this problem.
I've tried to find somethin that may help to decide this prob in GPRS and bluetooth settings of JAM but nothing
and one more questions:
is any software instead of standart WModem, witch always on and ready to connection without any manual operations like starting Wmodem. Soft making my JAM featured as any simple _ordinary_ phone like SE T610 for example?
thanx in advance for your answers (and sorry for bad english
Hi, I wonder if it is possible to get faxes on Qtek S100? I have a multi numbering operator's SIM card (data, fax, voice).
How can I do that?
Thanks
Try KSE Truefax ( I think it can be found on the forum) for sending and receiving faxes.
guys, I found this on the developer's website:
NOTE
Please notice that KSE Truefax is NOT running on Pocket PC Phone Edition devices with integrated modem, like XDA I + II, MDA I + II, Qtek, i-mate, etc.
anyone could manage it to work on Macician?
CEBEP said:
guys, I found this on the developer's website:
NOTE
Please notice that KSE Truefax is NOT running on Pocket PC Phone Edition devices with integrated modem, like XDA I + II, MDA I + II, Qtek, i-mate, etc.
anyone could manage it to work on Macician?
Click to expand...
Click to collapse
try this one:
http://pocketgear.com/software_detail.asp?id=15845
yep, this one works. thank you
with trufax, you need advance warning that a fax is expected then put the device in receiving mode, otherwise it wont work
rgds
jim
mamac said:
Hi, I wonder if it is possible to get faxes on Qtek S100? I have a multi numbering operator's SIM card (data, fax, voice).
How can I do that?
Thanks
Click to expand...
Click to collapse
I've just flashed my Magician to JAM_WWE_11100_132_11100 and... guess what... KSE TrueFax is already there!!!
yep, there it is
it also includes the Midlet manager to lounch Java aplications, Photo Contacts and Intellidialer
Did any of you get TrueFax to work?
Have you successfully sent faxes?
Thx.
yes, I did sent and received faxes
Thanks for the feedback.
By the way, can you tell me what maker and version of firmware you are using?
I am trying to use TrueFax with my Imate Jam and am having problems.
TMobile won't help me unless I pay $10 extra per month for a second line to receive faxes on. My complaint to them is that I only want to send and not receive and so I question if my account is enabled for fax data. Of course their techs don't know and only give me the canned response of that I need to buy a second line.
So my next question to you would be inquire whether you had to subscribe to any special additional services in order to send faxes with your service provider?
If there is a situation where it is the IMate Jam ROM that doesn't properly support TrueFax, then I would like to determine that first before signing up to and getting stuck with a contract for an extra $10/month.
Thanks again.
yes, you certainly have to subscribe for the second line (fax/data line) even only to receive the faxes. Truefax will "listen" only your fax line not the current. once you activate send/receive mode on the truefax, it disables your voice line (can not make/receive calls) and listens to your fax line.
it is not possible to use the truefax over your voice line. furthermore, your operator will not allow you the fax transmission over the voice line even if you will somehow manage to use it for faxes.
kse true fax receive fax error
when i get in receive and try to send a fax from my pc or some fax device my imate-jam answers the fax call but repoerted and error and hang. :shock:
the error is as follows:
Modem has reported an error. :evil:
Querying modem...
Initializing modem with "AT E0 V1 Q0 M0 S7=60 S10=10 +CLIP=0; +CRC=0; +CMEE=0; +COLP=0; +CBST=7,0,0"...
Waiting for incoming call...
and then nothing happens.
what may be the problem. is there anyone with tghe similar problem. :?:
R 1.13.00
G 1337.43
D 1.12.00 WWE
imate JAM
Kemal KARA
kse true fax receive fax error
when i get in receive and try to send a fax from my pc or some fax device my imate-jam answers the fax call but repoerted and error and hang. :shock:
the error is as follows:
Modem has reported an error. :evil:
Querying modem...
Initializing modem with "AT E0 V1 Q0 M0 S7=60 S10=10 +CLIP=0; +CRC=0; +CMEE=0; +COLP=0; +CBST=7,0,0"...
Waiting for incoming call...
and then nothing happens.
what may be the problem. is there anyone with the similar problem. :?:
R 1.13.00
G 1337.43
D 1.12.00 WWE
imate JAM
Kemal KARA