I instaled successfully SuperHero v1 Beta 1 + 2 Full & Lite Edition and Apps-to-SD on Haykuro Roms but I made a mistake i removed the microsd and now the phone loops in the htc splash logo
is iT bricked? if is not how do I fix it?
It isnt bricked. If the update.zip is still in the SD card, remove the battery and boot into recovery mode by pressing and holding the Home button. Do a wipe and update. If update.zip isnt in the SD card, take the card out and use a card reader to put it there.
I know you are panicking but try to do a search next time first
post this in the thread for the rom or in general.
thread moved
please post your questions in the correct threads please
thank you
Related
(soory my english) I updated the XDA 1.2 ROM throught the USB cradle, but before I overwrited my HDD by utility XDArit.exe so when I started flashing the rom, on the XDA was written "Update your rom" or something, but the process stoped cause the update program can finded the souce XDA rom 1.2 file. So I try the rom write to the SD card throught the card reader, go to the boot menu, updated rom, but the sign "Update your rom..." was still there. I made hard reset, soft reset, I got the sim out, nothing. The sing was still there. So I made upgrade T-Mobile rom 2003 throught the xdarit.exe a now I cant power on my xda. Boot menu is still off. When I get the XDA to the cradle, there is bad sign "Update your rom"... and some points...
Can you help me? Thank you very much.
You need to be a little more concise with your problems but from what I can gather....get an sd card, xdatools, and a rom of your choosing and read a lot more posts before doing anything else.
Once you've done that...burn an image onto the sd card and place it into your device. Boot it up and you should be oka.
Thank you, It goes super!!! XDATOOLS - the best program!!!
Ive just installed V10.2 ROM and im stuck on the Sony Ercisson Screen...what now?
Hard reset?
How? Thats not the little reset button on the back i guess?
OK, found procedure for hard reset. BRB...
You can always do a reflash with microsd method so don't worry
x1fan said:
Ive just installed V10.2 ROM and im stuck on the Sony Ercisson Screen...what now?
Click to expand...
Click to collapse
Have you hardSPL'd your phone before?
If not you will have to flash a generic rom via microSD method (or put your phone into boot loader mode and connect via usb) and then hard spl your phone.
If you have already hardSPL'd your phone, reflash the rom using microSD method.
EDIT: from http://whirlpool.net.au/wiki/?tag=xperia_guide_roms
Recovering from a bad flash
If you have forgotten to hardspl your x1 before flashing a rom or are getting an error when attempting to flash a rom (260-262) and can not get your x1 to boot then this might help:
1. Take the MicroSD card out of your phone and put it in to a MicroSD to SD card converter and insert it to your card reader.
2. Format the MicroSD card in to FAT32 format.
3. Download this ROM
4. Extract the .ZIP file and rename the .NBH file to 'kovsimg.nbh'
4. Copy this file to the freshly formatted MicroSD card (VISTA OR XP THIS DOESNT MATTER FOR THIS)
5. Take the memory card out of your PC/Laptop and place it back in to your Xperia
6. Remove the battery and replace it after 5 seconds. (dont replace the back cover)
7. The press the Volume Down key located on the right hand side of the phone and the power key keep them both pressed and then with the stylus press and hold down the reset button for three seconds.
8. You will then be presented with a Tri-Colour screen to begin with then the bootloader will load the kovsimg.nbh file.
9. Once loaded follow the on-screen instructions and your done, be patient the process does take a while about 10mins in total, BUT DO ENSURE YOU HAVE YOUR PHONE ON CHARGE, you dont want the power to die on you half way through, it would just be a waste of time.
N.B. HARD-SPL WILL ONLY LOAD ONCE YOU HAVE A WORKING IMAGE ON THE PHONE!!!! FROM THE SPL 0.72.0000 version.
awww man, x1fan, YOU'RE the one who "broke" it?!
let me know of the instructions above helped you out...
Cheers for all your help with this guys, all it needed in the end was a hard reset and some time to warm up i think, all is good as gold now..apart from the fact that it goes to xpanel screen prior to loading the home screen but the procedure above worked a treat so thank you all....YET AGAIN lol
I have a blackstone which is not working properly (I suspect the digitiser is FUBAR'ed). I am trying to microSD boot the Blackdiag.nbh file (downloaded from this forum) The SD is Fat32.
When I Volume Down + Power On I get the tricolour screen, the Touch HD starts to look for the image but reports no image to boot from.
The device has been hard reset, I also flased the radio on it some time ago to move off Orange. Not sure what unlocker it has on it.
Can some one tell me what I have done wrong please and how I can get it to boot from the diagnostic program?
Many thanks,
Fearof Weapons.
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
if you have wp7 on it...your problem is because of incompatible sd card..try another sd card and hard reset
GunbladeGriever said:
okay you guys, i dont know if im posting in the right section or not.. but i figured it would be good to post in the general section.
i have a tmobile hd2... it wont boot. sometimes i get the tmo bootscreen and it gets stuck there, other times its unresponsive, and other times it vibrates seven times and the screen never turns on..
i just want to mae this thing functional again. is there any way i can bring this device back to stock? whether its with a windows rom, or android rom, i really dont care.. lol i just need help. anything would be greatly appreciated.
Click to expand...
Click to collapse
Just thinking it could be a bad battery, but more info would be helpful.
Or check if battery pin is bent
Sent from my HTC HD2 with WP7.5/android miui using tapatalk
battery and pins are fine... th sd card was working before but now the phone seems to have been condemed.. any information you would need just feel free to ask, i dont really know what to tell you guys since i dont know whats wrong with it
I managed to get to the rgb screen.. I'm guessing hspl is installed, because it says hspl on the screen lol.. Any suggestions on what I should do from here?
Sent from my PG86100 using XDA App
that happened to my phone once. i thought my battery was fried or something, but it turned out that my pins were bent. works fine now.
if you can get to the RGB screen, your phone is still safe i believe. Try getting a compatible SD card and then try and flash another WP7 rom. Also make sure your HSPL is 2.08. Anything otherwise, won't boot also.
HSPL must be 2.08.... if any other version, WP7 wont boot... but most of problems in sdcard compatible
task 29, and reinstall hspl , than magdlr. also make sure of bad blocks.
okay, at first i tried an ruu that i got directly from tmo but it would always hang at 8%... then i ran the task 29 file and it went through 100%... im gonna let the battery charge for a little bit since i dont want anything else to go wrong... im going to search on how to install hspl and everything else.. im asuming that i need an sd card for this lol. thanks everyone for the help!
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Guys I’m having a similar problem. I had “XBmod-Yuki 2.1” loaded yet I was experiencing sporadic reboots.
I decided to re-flash using the SD card advice provided by XDA site. I purchased a new compatible SanDisk 16gb.
While following the XDA instructions to the letter, I completed the “Flash the ROM with DWI” step (w/ SD Removed) and my phone is now on an endless reboot loop. After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
The phone is not bricked because I can still re-flash the TMO stock 3.14. Yet when I try again, after “123456 GoGoGo” the screen goes dark and reboots; endlessly.
I love Windows Phone 7.5 Mango and I must restore my phone to its glory…
Please help! What do I do to get pass this paralyzing issue???
insert card to phone and turn on with Volume Up + Down + Power together.... when white screen shows, follow instructions on screen...
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Thanks for the reply DXDY...
I tried what you suggested. The master reboot completed and the phone rebooted into the same endless reboot loop.
My steps have been to:
reflash stock 3.14; allow complete boot up
install magldar113_daf
delete mbr using magldr113
Enable 24MB extra memory in Magldr services
Flash the rom with DWI...
after i flash the rom it reboots in to the endless loop. it never completes a boot up cycle. Right after "123456 GoGoGo" the "tomobile "stick together" logo flashes and the phone reboots; endlessly...
I have tried different roms; exact same behavior...
it has to be something simple because, the phone is not bricked; I can still re-flash the TMO stock 3.14. The stock ROM works perfectly and my SD card (Sandisk 16gb class 4) still works perfectly also...
Any help you can provide is greatly appreciated...
only problem then is SDcard.... try boot without sdcard for test.....
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
i have tried reflashing with the SD card in the device and with the SD card removed. Once before i was able to flash the either way (with or without - both ways worked before). Now immediatley after reboot the device enters endless reboot loop...
any help is appriciated...
try with NAND toolkit... http://forum.xda-developers.com/showpost.php?p=19931919&postcount=501
wipe NAND with Task29, check and install again HSPL 2.08
flash WM6.5
flash MAGLDR
after that flash WP7
dont know which other to advice you...
melcad Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endless
what is task29? i understand the other items. i just need clarification on task29...
Task 29 formats the partition drive of your device where the ROM resides.
it's cleaning partition, removing any leftover junks thereby giving a fresh partition for the ROM to operate
Please Help! After “123456 GoGoGo” the screen goes dark and reboots; endlessly.
Wow, that did it! the task29 cleaned up the NAND as you said and allowed me to reflash WP7...
One last question; when updating WP7 using the cab sender method; may I remove the languages that i dont need from the RAR pack???
incompatible sd card....change and try again with another sd card
dont remove the language cabs...preferred to keep them in
Hey guys.
I have a bricked HTC HD2 here. I installed Android 2.2 on it, and it ran fine for a long time. But a few days ago, it got stuck in a bootloop. It gets stuck on the Android logo and doesn't get past that point at all.
What I've tried (in chronological order):
1. AD Hardreset from aMAGLDR: erased all data, but didn't fix the problem. Kept going in bootloop.
2. AD Recovery: Failed. Doesn't get past the "GO GO GO!!"
3. Repair aMAGLDR using HD2 NAND toolkit: tried repairing (150MB partition size) and installing Clockwork Mod (150MB). Same exact results when trying to get into AD recover. Only diffrence is that I now don't have a ROM on my NAND anymore.
4. Install a diffrent rom: Tried a few of them, but they all keep getting stuck on their bootlogo (HTC, Android, ...).
5. Restore STOCK ROM WM6.5: I'd love to, but I can't get into the three-colors-bootscreen. It goes straight to aMAGLDR, even when I boot holding the right buttons (volume down + power [both short click and long hold]). I had set up the ROM files correctly on the SD card.
6. Install the STOCK ROM using the HD2 NAND TOOL: after going to USB Flash mode and installing the default microsoft drivers (it didn't want to accept the Google Android drivers or HTC drivers I downloaded earlier), the flash utility keeps getting stuck on ERROR 264: CONNECTION. The only thing I can do in the HD2 NAND UTILITY is repair aMAGLDR. Other options result in the same error. Task29 can't find the phone either.
Bottom line, I cannot (ABSOLUTELY not) get into the tri color boot screen. It sends me straight to magldr. Also, my volume buttons are working just fine.
I really don't know what to do anymore. I hope someone can help me, any help would be greatly appreciated
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
powerofthink said:
Did you try this?
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button
Click to expand...
Click to collapse
Did you even read the OP's post, clearly I think not. The OP says several times that they can not get the device to the multicolor WINCE bootloader.Without being ably to boot into the bootloader they can notflash via SD card.
At the OP you can stop trying to flash via USB flasher in MAGLDR, it is only for flashing Android RIMs, WP7 ROMs, and Custom Android recoveries. If you are positive your volume down button works then you probably have some bad NAND blocks, but that is just a guess, with out access to the bootloader you are pretty much only left with flashing Android or WP7 via USB flasher in MAGLDR.
That's problematic... The HD2 NAND utility can't flash any ROMs, since the utility can't find the device (error 264).
I've tried 8 diffrent ROMS (from http://android.hd2roms.com/) by putting them on the SD card and use the "AD SD boot" function, but none of them can get past their bootlogo... All ROMs keep hanging on HTC / Android logos. Some of them used to work in the past, I recall...
Here, try these fixes and read the WHOLE POST :
http://forum.xda-developers.com/showpost.php?p=21725062&postcount=7
Thanks for the link. Unfortunately, none of the solutions worked. The battery pins were indeed bent, but after putting them back in place, the problem persisted.
I left my phone powered down all night and tried booting it in bootloader this morning. It didn't work. So that rules out solution 3 awell.
I've even put it in the freezer for half an hour (solution 5), but nothing changed.. Browsed through the last thread aswell, but there was no stuff I haven't tried yet. I can't even start tetris, since it keeps hanging on a blank screen aswell
The guy in solution #4 was facing the same issue (I think).
Especially the second part of the solution, where he talks to the OP. Read it carefully, and check out the post and thread he referred to.
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Lorre851 said:
Holy freakin..
After reading various threads through links in the one you suggested, I stumpled upon something called American Android. I was able to install it through the USB Flasher. Guess what, it booted PERFECTLY!!
My phone works again, thank you VERY much!!
Click to expand...
Click to collapse
horayyy for the HD2 & for the guys that gave the solutions!
need information in case of not getting into the bootloader
how can I use the american android + USB flasher method to work for my hd2 if
I am not able to boot it,
can't soft/hard reset it,
can't get into the bootloader (using volume down + end key pressed).
I used android installed on SD card.
It is totally unresponsive for now. volumn keys worked perfectly when it is was working lastly !
Please tell what can bo done to it to get it working or where does the problem lies.
check your battery pins and also battery if it is charged.
and,
Download an original win 6.5 ROM for your HTC device from HTC webside.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card(formatted FAT32.)
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume or without press
Click to expand...
Click to collapse
and then you can try an android rom again..
Another solution?
I had the exact same problem. And I am under the impression that there is no solution for every case. But for me it worked to press the volume down button very softly. I tended to push the button as hard as I could, however when I only pressed the volume down button slightly it went straight to the triboot color.
Hopefully this works for some of you.
Can someone help?
Hi,I want to refresh post, becouse i have exact same problem - can't get to serial bootloader, and in MAGLDR i can use only the USB FLASHER option. If someone could tell me how to flash any new rom only through FLASHER ? Last thing i can say: my problem started from installing this app from google Play play.google.com/store/apps/details?id=eu.chainfire.livelogcat.lite (sry for that, but I can't post URL yet) it might messed up my kernel and i have no idea what to do.