any please help my BA is Dead/Brick......that happen when I Downgrade to Windows2003 from w6.1 for one day is fine but in the second day it gone dead...
I try to hard resset but do nothing....I Try To Upgrade again it say device not found....I thing my pda is gone Bricking.....I just found in xda-developer how to unbrick with JTAG but the picture its not complite I want a Complite picture how to make JTAG and tutorial to write or flash my pda from the begining to the end please anyone send me this picture and tutorial or give me the website to download it please heeeeellllllppppme.....................
Related
herm100 ipl-1.01 spl-1.09
i can not flash this herm i ben looking every where 2 found a working soloution and no luck so let us share informations about it hope that will help me and otheres on this nice pro forum
thank u all
You've not told us much about your phone/device or what you've done so far. I'd suggest you use the links below my sig to visit the WIKI and MR Vanx Upgrade Guides. Read through these areas, they will give you all in info you'll need to get started.
sorry 4 not exp much the mob stuck on the first screen and the only way my comp see it is by boot mode and i have recive it like that i think someone was trying 2 put frensh lang on it
hassan35278 said:
sorry 4 not exp much the mob stuck on the first screen and the only way my comp see it is by boot mode and i have recive it like that i think someone was trying 2 put frensh lang on it
Click to expand...
Click to collapse
www.mrvanx.org
These are great guides. The only difference is you need to start in bootloader mode, since you say it is there, and manually choose the bootloader version when prompted by the updater program.
OR, you can use SD Card method. Good luck.
Also, DEFINITELY read up in the forums and wiki, as stevebonning suggested. Could save you much trouble later.
cant get my head arround it when i try 2 flash it with the same boot loader got mess like can not comunicate with mob can plz somone give me a sample inst plz need help with that
tx
i read it all but it appear that i cant downgroad thw spl while the phone in boot mode and this is the only way my comp see it cause the mob stuck on the first screen please help what sheel i do to make the downgroad take place in boot mode please help im waiting
tx
Read this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Match your SPL and symptoms to the list, then do what it says.
thanks 4 reply i did all that but the problem is i cant flash it with Hard-SPL-V7 becayse as i said the phone is in boot mode and stuck on first screen please help
tx
still waitaing for ur help please reply im willing 2 try everything i need 2 get this mob working again
tx
I don't think you're going to get a better reply until you explain exactly what you have done, and what exactly you have done to try to fix it. These short 1-line messages saying "it doesn't work, i tried everything" are not going to cut it.
as i said before i the updater always come with error 262 communication errorsduring the update process .as i said someone try 2 flash it with frensh lang before im using hard spl v7 and Satin Medium but no luck always same error after 0%complete it on the white screen please help
tx
hassan35278 said:
as i said before i the updater always come with error 262 communication errorsduring the update process .as i said someone try 2 flash it with frensh lang before im using hard spl v7 and Satin Medium but no luck always same error after 0%complete it on the white screen please help
tx
Click to expand...
Click to collapse
Well, I did not go back and read the thread, but have you tried SD Card flashing method. You will not get a 260 Comm Error.
i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
This may help!
Hi Kanwalgee.
The problem is that you tried to flash a ROM for SPL3.5 and you have SPL 1.20.
I read some of that in this thread. Read and it maybe help you to correct the problem.
Then go to the mobile 6 section and read this other thread.
I hope this will useful for you.
Regards.
am using artemis p3300 but when i flashing uspl at 99% it shows upgrade failure now pda will be dead i cant go bootscreen too is any solution to back to boot screen? help me
Hi,
what do you mean by bootscreen? Windows boot screen or Artemis' bootloader (tri-color screen)? First of all I would try a hard reset, here's how to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
Did you try to flash USPL with this? http://forum.xda-developers.com/showthread.php?t=311403
You should at least be able to enter bootloader..here's an interesting thread:
http://forum.xda-developers.com/showthread.php?t=306904 .
Sorry I can't help more, i never experienced a similiar problem but I'm really curious to see it solved, waiting for some guru to help
sorry sir if i put battery inside pda will be start heating i cant switch to tri colour bootscreen havent money to buy a another pda am going to mad and am a looser.
Use MTTY to reset flash, the install the official rom for your device.
device never switched on is there any way to switching power on my device htc artemis p3300
bricked artemis goes mtty to reset the flash please give link here
how can i mtty to reset my bricked artemis please give me the link to download the file.
Is there any other way to recover the bricked phone in linux
because we all know that linux is good OS than windows.
if we somewhat how put our bricked phone in usb mode in linux
than we are able to copy SPL file in that phone
so please find any solution for Wizard 200
or if there any solution than please reply me (please dont suggest me JTAG)
I try it but fails
waiting for ur reply
thanks in advance
same problem
same problem dear....no idea my wiza200 completly dead... after rom update,,
no bootloader no led no chartging...
i like to discus with u
[email protected]
My name is carlos and im new in the forum.
This is my problem. I have an HTC Imagio. I tryied to update it but i fail because my phone wont turn on again. I dont know what can i do because I new in the htc world and I dont know how can I start.
Please heeeeeeelpppppp meeeeeeeeeeeeeeee
when yoy say "fail" what exactly happen....???
The phone wont turn on again T_T
You're not giving a very good explanation, did you attempt boot loader mode? anything else? at the present moment, you're just taking up thread space..
The boot loader mode is the hard reset??? or what is it?? The phone doenst enter on the hard reset (color screen with 3 options)
Moved as this is not ROM Development
Sorry about that, anyone know how i can fix it????
Hi i have a imagio dead. No bootloader load (someone wrote a blackstone hspl) and broke it .. the only thing when i connect on usb it is found as a qualcomm msm smthing. no drivers for this.. looked all over, xda, google. i found some jtag methods... I wrote a Intelpxa for a rw6815 with jmmflaser... but befor trying a jtag method, and/or try to sell it for components, i want to give it another try. Does enyone know how at least connect to mtty(to write wia usb the bl), or write a bl (any) wia usb?
Imagio Bricked
No USB way...
Unbrick a phone just can be made with JTAG tools... See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list
Hello everyone ... this is my first post on the forum I'm a reprimand in my assistance, a residue in Brazil and a customer trou Imagio HTC unlock the verizon and I just noticed that no longer seems to me he is the one CDMA XV6975 which blotted out and not turned over, but do not have IMEI MEID DEC and HEX as well ... riff bought a box to try and repair it could make you turn it on, no longer leaves the HTC logo and is vibrating, already tried the hard reset recovery mode and nothing continues to vibrate, not boot tried one more rom's not leave 0%. Can anyone help me with this device, because the customer does not come out of my foot.
Thanks to all.
Htc imagio bricked
hello guys, i really need help from u. i bricked my imagio this evening and right now it wont turn on so i don't know if u guys can hlp me with any software to recover it.
I will be very happy to c my imagio is breathing.
thanks for your help may God bless you all.