Weird Issues with Haykuro's SPL? - G1 General

Hey all, I hadnt visited xda for about 10 days until yesterday, to see how the different builds with Hero were going. Then I see the SuperHero post, and I remember that I have a partitioned 2gig MicroSD. So I go and re-root my phone(I unrooted due to rebooting issues) and install the HardSPL. After installing the Hard SPL, I try to Install Hay's Radio, then after a succesful Install, Install Hayk's SPL. Now, its kind of weird, but it doesnt want to boot. I got bricked and DREAIMG.nbh my way back to RC29. I read all about it, and saw that you need a PVT board and all that, which I do. I also remember he said there was a 99.99 Chance it will work with pvt, which, again, im guessing im that 0.01??? I am sure I have a PVT Board, it says PVT 32B or something like that..Its kind of awkward, so if anyone has any suggestions to tell me I would appreciate it. Also Mods if youre going to move this, please advice me first, I want to be able to track my Post.

I really could not track your steps but did you flash the radio update before you flashed the new spl?

Was it hung at the G1 screen? If so go back into the recovery and reflash the SPL. After it has completed, do not go into the console and type "reboot recovery". Instead reboot with the home and back buttons. It should then reboot twice and end back up in the recovery again. You should then be able to flash the ROM of your choice. That is what worked for me.
Vermithrax

Flashing the SPL will change the size of the system and data partitions of the internal memory, so you must flash your system again and wipe.

In general, find it there

Got the same problem, can't even get to recovery.
Hope there is a solution soon.

billc.cn said:
Flashing the SPL will change the size of the system and data partitions of the internal memory, so you must flash your system again and wipe.
Click to expand...
Click to collapse
And there it is.

Yes, I have been having the same problem as well, I believe a thread needs to be created in order to solve the current solution. There is no possible way for me to get into the phone what so ever at this time unfortunately. I am stuck at the G1 screen and I am unable to pass into recovery mode. Perhaps a brute force connection is necessary?

TylerKinkade said:
Yes, I have been having the same problem as well, I believe a thread needs to be created in order to solve the current solution. There is no possible way for me to get into the phone what so ever at this time unfortunately. I am stuck at the G1 screen and I am unable to pass into recovery mode. Perhaps a brute force connection is necessary?
Click to expand...
Click to collapse
This thread has been created. "Let's fix that SPL" by haykuro.

Related

Having a few problems

I have been searching the forums for about an hour trying to figure these things out.
Previously I rooted my phone back when JF was the only ROM out and I didn't keep up with it.
Now I see that there's all these new different kinds of roms and its pretty confusing.
So far what I have been trying to do is start from the beginning because I don't know what is updated and what isn't.
Trying to un-root my phone, was following this thread. I believe I was able to update the original SPL that is in the sticky thread in development by doing the update. After that I was trying to get into bootloader to load the DREAIMG.nbh and it would just show the tri-color screen and nothing else. I hit the power button as it said on that thread but nothing showed up, waited about 30 minutes. So I restarted and tried a few times, no luck.
I reboot my phone once more and let it boot up normally and my old ROM is still intact, just wiped. I decided to just try to update to the SuperHero Full ROM and reading the thread it says newest SPL is required, which I can't seem to find which one is the newest.
Any direction or if I'm doing this wrong would be nice to know. Thanks for any help you can give.
http://sapphire-port-dream.googlecode.com/files/spl-signed.zip
that is the newest signed SPL. flash that, then install hero, along with a wipe to make sure you have no problems, and you should be good. as far as your flashing problem, what exactly are you doing?
I was trying to flash it back to RC29 and was having issues
issues with what? i dont know what the problem is unless you tell me
if it is a flashing issue for the SPL, there are many threads in the dev section.... as far as downgrading, there is another thread over in the dev section, go check them out
corp769 said:
issues with what? i dont know what the problem is unless you tell me
if it is a flashing issue for the SPL, there are many threads in the dev section.... as far as downgrading, there is another thread over in the dev section, go check them out
Click to expand...
Click to collapse
I followed the downgrading or unrooting thread.
When I try to downgrade to RC29 in bootloader, it goes to a tri-color screen with just Serial0 in the middle with the Radio version and such, then does nothing else. I'm going to try skipping downgrading, wanted to start from scratch but I will just try to switch from my ROM to SuperHero's and see how it goes.
update: I did the SPL update from that link and now its stuck on the boot screen (G1 logo)
Are you able to enter into recovery? (Power on while holding the home key) if so, place the rom of your choice (something other than the Hero Rom until you are sure you have the latest SPL and radio) on your sd card, name it update.zip wipe then apply the update. This should get you up and running. Also? Which radio do you have?
jordanjf86 said:
Are you able to enter into recovery? (Power on while holding the home key) if so, place the rom of your choice (something other than the Hero Rom until you are sure you have the latest SPL and radio) on your sd card, name it update.zip wipe then apply the update. This should get you up and running. Also? Which radio do you have?
Click to expand...
Click to collapse
I have Hero running
Thanks for the help. Going to try this out and see how it goes. Thanks all.
No problem. This thread can be closed now.

Bricked MyTouch. Please help.

It would appear that I dropped the incorrect SPL on my phone when following this guide (http://android-dls.com/wiki/index.php?title=Amon_Ra_recovery_tool). I used the one that was mentioned, and now the phone no longer fully boots. I can still get into fastboot/hboot, and technically into recovery. The screen is not displaying properly on either mode, leaving hboot difficult to read, but useable, and recovery without a UI (the MyTouch splash stays there, but the phone goes into recovery mode).
I did manage (somehow) to get CM-Recovery 1.4 flashed to it, and that is how I managed to install the SPL. I had the 1.33.0006 SPL prior to bricking.
I also tried fastbooting and it is no longer blocked.
What are my options here? Am I boned, or do I have a way out of this?
Thanks in advance for the help.
If you have a SD Adapter try to add any ROM to your SD and flash it. I did that earlier, and it worked. If you can see the recovery image screen then its not fully bricked. Good luck.
I can attempt to do that. Thing is, I'm blind once I hit the recovery screen. Can't see jack because the video is all messed up.
Should I attempt to keep flashing SPLs till I find one that works? Or is that a very, very bad idea? Given, that, is there a way to go back to 0006?
Thing that sucks is that I just got this thing yesterday and got a little overzealous with the rooting. Whoever helps me through this is definitely getting a case of beer or something ><
---
I guess what would help me the most at this time (I think) is suggesting which SPL I should drop on the phone (2004 is now on there), or helping me get 0006 back on there or something of that nature.
Can I control Recovery via adb? If so, awesome. But can I push an SPL via adb, that is the question?
Also, since I was somehow able to get a different recovery on the phone, do I still need to deal with the goldcard and all in order to install a different ROM?

Need help I have tried everything

Hi guys, I'm pretty new here so I hope someone can help me.
I am having serious issues trying to load ANY new ROM onto my missus HTC Vodafone Magic 32B Details -
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAP10000)
CPLD-10
RADIO-2.22.19.26I
Apr 9 2009,23:30:40
Since getting the phone second hand from eBay it has played up like nothing else, it now will not even boot into the OS, I’m pretty sure the guy I bought it from, who I cannot get in contact with, stuffed something up when he unlocked it for different carriers. But I'm positive it is an OS issue and not a straight hardware fault.
Anyway I have spent about a day and a half mucking about on here trying things and reading a HEAP of stuff and I just can’t seem find a definitive answer to my problem.
I have tried installing many different roms:
Qteknology Hero (WWE Dump) for G2 Magic-Voda 32B v1.7 Swap
Qteknology Hero (WWE Dump) for G2 Magic-Voda 32B v1.6 Swap.zip
st0kes-v1.4.1
HTC_Magic_Vodafone_AU_Original_ROM
and a few others I cannot remember.
I am using Amon RA recovery ROM, I have rooted the phone based on method 2 in the magic rooting wiki (everything went smoothly), I have updated the SPL to version 2005 which are all the apparent pre requisites for performing this kind of operation.
Anyway down to the problem every time I try and apply a ROM, by renaming it to update.zip, copying it to the root of my SD card, then loading up RA recovery ROM and going to flash zip from SDcard I get the following messages:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Install from sdcard...
finding update package...
opening update package...
verifying update package...
E:corrupt file:
<various file names based on which ROM I’m trying to use, always the same one on each ROM though>
E:verification failed
Installation aborted
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This is starting to drive me insane, I really need to get ANY usable ROM on there I don’t care which one, otherwise I have a AU$400 lump of useless technology.
Any help people can provide me with be unbelievably appreciated.
Thanks in advance
i cant guarantee i can help, but i will try to see if i can, or also help wit some research for ya
first, what version of amon ra are you using???
2nd, do you know if you got 1.5 or 1.6 firmware???
idk too much about firmware, all i know is my mytouch was cupcake when i got it (1.5) then updated to 1.6 ota...
also are you making sure that you wipe before you try to load the roms???
Hi mate, thanks for getting back to me so quickly
The version of amon ra i am using is recovery-RA-sapphire-v1.6.2G.img this seemed to be the right one as i have a google branded phone
I am not sure what version of firmware i have, is there an easy way to check? the only real details I have is what i get from the fastboot screen as i posted above
And yes I am definately wiping the phone before I install the roms, every single time
Thanks
well i just did a few searches and i couldn't find out how to check the firmware...
i dont want to tell you to try something and then crash your system, but...lol...
i would try to "Unroot" the device, basically placing it back to 1.5 firmware and then you can "Root" it yourself.
if you want to try this here is the link for the 1.5 software
link for tutorial:
http://theunlockr .com/2009/08/22/how-to-unroot-your-mytouch-3g/
link for file:
http://www.megaupload .com/?d=BLM4EDGE
no space in the url tho...
all you have to do is,
boot into recovery
go to wipe, and wipe the top three options
go back to the main screen and select Usb-Ms toggle
then plug your device in via usb
and drop the file to your sd card. (not in a sub folder)
then safely remove your phone from pc
then press home on your phone to disable usb
then choose power off.
now to turn it back on,
holding Volume "Down" + "Power"
DON'T PRESS ANYTHING YET
after it reads the image it should show at the bottom, Action:yes, and then click trackball,
let that run all the way thru, and make sure you have enough battery juice, for this to run all the way thru.
when it's complete it will ask if you want reboot, then click Action for yes (trackball)
i believe that should unroot your phone but PLEASE PLEASE PLEASE
do as much research as possible and also question others about this method and see if you can come to a conclusion in which you are satisfied.
as always, i am in no way responsible for the Bricking or Exploding of your device...
here is a link that has great tutorials & and also you might want to check youtube, thats where i findout how to alot of things...
Um, you already have amon ra recovery on there. I assume you've already bought it rooted?
You can only check the firmware by booting up your phone and going into settings. Since you've wiped and aren't able to install a rom, you aren't able to use the phone right now, am i correct?
sanman1185, I'm glad you try to help but you gotta get more info from him first. Cause if he's already rooted, doing what you're telling him to do won't make much progress. Edit: Ok, he's already rooted. You're just telling him to do what he's already done? And he doesn't have any firmware because his phone lacks any rom right now.
Anyways, answer some of those and don't be too worried about bricking your phone. The main reason that people brick their phones is when they touch the radio and SPL.
Edit: Ok I just read that you rooted your phone so you don't need to "unroot" and root it again.
You also put on SPL 2005 instead, so post your boot info again. I assume it's an ENG SPL too, if you haven't found a solution, send me a PM and I'll help you on google talk / MSN or something.
Ps. You don't have to rename the roms to update.zip, his new recovery allows you to flash w/e zip you want. Try another SD card as well, maybe that'll help? but if not, yeah just pm me
KAwAtA - def. understand what your sayin, only reason i was thinkin to unroot and start fresh is cuz, when i started flashin roms, i ended up being stuck on the boot screen for over 30mins. pulled the battery, then read somewhere to partition sd card, then that wiped the zip from my card, lol...so what i did instead of placing another rom on the device, is "unrooted" and started fresh from the start. my theory is if you think your "Jack'd" then start from the beginning and find your mistake.
and if he did unroot and it ran Cupcake on device, and actually loaded wouldn't that have been making progress??? since he couldnt get it to load in the first place???
like i said just a thought, theory, or 2centz (sense)...
but again, i'm glad someone actually responded with a diff method or with additional ?'s, so this way he can get answers from all angle's ya kno...
and if you guys do figure this nifty lil'thang out, could you post what you guys did on here, so myself or future ppl'z that may run into this can have it as a ref??? thnx... Pce

1.33.2005

Hi all,
I'm a complete newbie. Most of you will have little patience for me but I'm hoping to find at least a couple of you willing to help me out. Here's my story. I thought it would be cool to by a used HTC Magic from Ebay to use with AT&T. The guy that sold it to me put Froyo on it and I was excited to have the latest Android on the phone.
I got it yesterday and the trouble started quasi immediately. I will post the exact things that happened as well as I can.
1. First the phone was rebooting on its own. It would make it as far as the home screen with the icons but if I tried to press anything, like contacts, it would reboot.
2. Then it eventually took me to the recovery screen where, after reading several threads, I downloaded the newest (not ROM, but whatever the first thing is on that page that you can update it).
3. Then the phone stopped rebooting itself but I couldn't get to the market or email because the dumbass that sold me the phone hadn't wiped his user info. So I googled again and was told to factory reset.
4. I tried factory reset 3 times and it did nothing.
5. Went back to the recovery page to see if that had anything that would help and I clicked Fix Permissions and let it run that.
6. Still no change when it came to wiping his user info.
7. Got frustrated and googled again. This time I saw a thread that said you should reboot using the up/down key and power. Did that.
Since then, I've had a blinking HTC green screen. At some point during this process I made it to what looks like a basic OS window from which I copied the following information:
sapphire pvt 32b eng s-off h
1.33.2005
radio-2.22.19.261
apr 20 2009, 15:30:43
hboot
What do you suggest I do now? I emailed the guy who sold me the phone because I figure if he put it on there, he can put it back. Or at least send me the files. Not sure he will care or want to help me. Besides, doesn't seem like he got it right.
I am willing to try to fix this myself but I don't want to start downloading files and flashing the phone only to destroy it. Guidance is needed.
Thank you in advance.
Seelier.
Metuchen, NJ
If the device actually booting then you should be alright, just sounds as if the guy who sold it to you flashed it with something crappy.
1.33.2005 is your SPL version, and that particular SPL version is what's referred to as an "engineering SPL" which allows you to flash roms and custom recoveries via fastboot (basically). For more info you can read here , but it doesn't overly concern you now.
To flash any roms yourself (more easily) you will need a custom recovery such as Amon_RA's Recovery, which you can download in this thread. Follow his instructions. You may already have this but you didn't say so.
Once you have done so, I suggest you install a ROM such as CyanogenMod, which you can get from here. Again, instructions on how-to flash it are in his thread. Essentially though, it is as follows:
- Put cyanogenmod rom on your SD card.
- Boot in to recovery screen (press the ON button whilst holding HOME)
- Wipe data/dalvik-cache
- Flash .zip from SD card & choose the file you put there
- Reboot the phone and wait patiently
Edit: Just to reassure, the things that tend to "brick" phones are flashing SPL and Radio updates, which you don't appear to need to do. Flashing roms very rarely causes devices to break, it is usually just the rom at fault.
Not Development related. Moved to General.
OP, next time you post make sure you post in the correct section or I'll close the thread.

[Help] Phone wont boot.

Hi, after hours of researching to find the problem, i cant find it so as my last resort i will ask the mighty forums if there is anything they can do about it.
The problem is that its stuck in a boot loop, i can get in to bootloader and Hboot.
When i press to go in to recovery its just goes to the HTC logo and stays there.
When i try to do a factory reset same thing happened.
Anyway, the facts.
Its a DHD it used to have leedroid latest as rom, atm i have no idea it is supposed to be 1.32 stock rom for rooting and RADIO-26.14.04.28_M, kernel was also leedroid recommended but i guess that also is 1.32 stock.
It was ENG S-OFF but then i tried some PD98IMG and it changed to SHIP S-OFF
Things that i have tried.
Tried different PD98IMG to get the recovery working but nothing same thing happened there.
Tried patched/flashed the recovery part only with no luck.
Tried to get into recovery through pulling the battery inserting the usb and then inserting the battery again, no luck.
The odd thing is when i try to charge the phone and the led goes orange and when i pull the usb out it stays orange, it should turn off.
I suppose i ****ed something over but i have no clue of what that is?!?
Help would be most appreciated
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
shad0wboss said:
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
Click to expand...
Click to collapse
Done and failed, same problem no difference what so ever.
SHIP S-OFF is OK!! U got it m8!
If you want to use your own Image do it within this way:
1. Flash this: http://www.multiupload.com/FKJ8B7Q0QM
and after this:
2. Flash this: http://www.multiupload.com/AURLLESU5V
And enjoy it! I don't know why the PD98IMG is not working on your device so I recomend to flash the RUU. Within the RUU you will also get the latest firmware for phone and wifi and so on. It's not a need, it's a must!
The 2nd ROM is same as above but it's ROOTED and contains the 4ext Recovery which will give you the option to flash whatever you want.
BUT!!! This ROM's are ORIGINAL. If you want to use a CUSTOM ROM I would recomend you will format your device by the 4ext Recovery or you are using the FULL WIPE 1.5.
Regards!
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Grant Barker said:
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Click to expand...
Click to collapse
Dude, I plus 1 this comment.
Doing exactly that has helped me in the past too.
Well, i am here again with some videos this time, dont really know if it will explain anything but here goes nothing.
youtube.com/watch?v=cHA-k6SadoE
Just a simple start to show what the hell is wrong with it.
youtube.com/watch?v=squwhiGNM3s
Here's me trying factory reset but failed, stuck at the same place as before.
youtube.com/watch?v=aZF1ALz0Z-w
Here is where i go into fastboot, just to show that i can do it and then back again to try recovery, same problem...
Anymore info you need, next time i will answer much faster, anyway there the problem it gets stuck on HTC logo forever, no restart no nothing...
ithen said:
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
Click to expand...
Click to collapse
when you flashed PD98IMG.zip does it give you a cid error?. If this is the error then a gold card needs to be made for your device first, then you flash the RUU.
Back again.
No CID error, its skips something called TP when i try to flash it.
I can use any simcard, its an unbranded phone i believe.
And also if it is to any help, when i plug my charger in the phone and then back out again, the little orange led keeps emitting light, as if it stills charging.
My English is not very good.
I want to know what did you do for it before its stuck in a boot loop?
You can get into HBOOT and connect the phone to the computer,then try to run RUU.Before you do this,make sure you have make golden card.
Try another pd zip..i came across a few corrupt ones,the answers in this site somewhere alterbatively google the sentence you want the answer to..or the key words,if the systems still working theres a 98% chance youll get it going boot loops from what i see are just a file or something causing chaos..once its gone voila.
Good luck
Sent from my Desire HD using XDA Premium App
Enter hboot and paste exactly what it says in there.
SHIP AND ENG don't matter as long as it's S-OFF. If you can't access recovery and if you're unable for some reason to flash a PDimg, download AAHK and use it to unroot. That will hopefully get you into the stock ROM and S-ON of course.
Use AAHK again to root. You will still have access to your stock ROM.
Now here's the tricky part. If the phone won't boot at all that probably means there's nothing to boot at all. Happened to me a lot of times. If you can still get into hboot then don't panic. See if AAHK will help you out.

Categories

Resources