hey guys,
not sure if anyone knows the answer to this, or even if theres software available that will do this.....
i have the HD as a handset. it has wifi - we all know that.
my work has cisco VOIP system (SIP-based), that could be configured to allow traffic to our wifi network (or a new SSID setup for VOIP).
i know their is some SIP software out there, but apparently it disables bluetooth once installed - so this peice of software is no good.
HOWEVER, would i would like is when wifi is enabled and sucessfully connected and the SIP (VOIP) software sucessfully connects to the server, then all calls made are via wifi as default.
so, the questions:
- is there any software available that has the above features?
- would i need 'line2' enabled from my service provider?
think fring support sip
that would be a good test platform, but i forgot to mention that i would prefer it to be intergrated into the existing dialer, rather than a 3rd party app.
somewhat like how 'video calling' is, but obviously via a pre-configured SIP service.
the last time i looked into this voip drivers for integration stopped the GPS function working (it has been a couple of months since i last checked though), so i use either agephone (paid app) or fring (free) for SIP calls, both of which will use the contacts on your phone.
not so much the contacts, it's the fact i have to load/switch to a 3rd party app to use SIP.
the app you used that disabled GPS, could well be the one i used. i remember it disabling one of the phones' featured that i used.
veehexx said:
hey guys,
not sure if anyone knows the answer to this, or even if theres software available that will do this.....
i have the HD as a handset. it has wifi - we all know that.
my work has cisco VOIP system (SIP-based), that could be configured to allow traffic to our wifi network (or a new SSID setup for VOIP).
i know their is some SIP software out there, but apparently it disables bluetooth once installed - so this peice of software is no good.
HOWEVER, would i would like is when wifi is enabled and sucessfully connected and the SIP (VOIP) software sucessfully connects to the server, then all calls made are via wifi as default.
so, the questions:
- is there any software available that has the above features?
- would i need 'line2' enabled from my service provider?
Click to expand...
Click to collapse
X-Pro_Softphone_for_Pocket_PC_2.2.2
Related
Hi,
Anyone knows any free VOIP softphone for O2 Exec which allows to configure to use third-party SIP providers (e.g. sipdiscount, sipgate etc.) ?
Thanks!
SV
use skype
Sorry, I meant to configure with SIP protocol.
sjphone, works fine
With SJPhone, at the moment, when calling, you have to use loud speakers or headset not the phone speaker. Is it right?
Thanks!
That happens with any phone edition device.. Apps don't have access to the other speakers...
Re Sip
I have tried many. However most free products are generic to a provider,
Successful products are:
Xten lite from xten Networks
SJ Phone this is the best and is easily configured to multiple profiles.
It intergrates nicely with our office Sip server too,
Regards
DW
Re Sip
I have tried many. However most free products are generic to a provider,
Successful products are:
Xten lite from xten Networks
SJ Phone this is the best and is easily configured to multiple profiles.
It intergrates nicely with our office Sip server too,
Regards
DW
svkhtn said:
Sorry, I meant to configure with SIP protocol.
Click to expand...
Click to collapse
May I know what is SIP protocol?
Is it different with Skype protocol? Is SIP protocol is a standard one?
Thx.
Regards,
Arto.
Artosoft said:
May I know what is SIP protocol?
Is it different with Skype protocol? Is SIP protocol is a standard one?
Click to expand...
Click to collapse
SIP is a standard - most VOIP application and hardware uses it.
I meen: SIP RFC 3261
Skype is a own protocol and only skype clients can connect each other using skype soft phone or by skype gateway.
I guess that the source is not public.
I use AGEphone.
http://www.ageet.com/us/
It is not Free.
But, maybe best.
Files are light, but works very well.
the sound is very clear.
We can use SIPdiscount, VoipBuster, VoipStunt, StanaPhone, SIPphone, Free World DialUp, Agilephone, etc all at the same time.
I installed SJPhone and could get connected. I could dial my cell phone number and it will ring my cell phone.
But there is no sound whatsoever in my Universal/JJ.
Can anybody help me? Did I miss something? I tried to plug in my headset but no luck as well.
Thanks.
Also, may I know which version of SJPhone you guys use?
Can you send the link for the download? I can only find the one for 2003SE and 2003, nothing for WM5.
Since I didn't see a follow-up post by anyone, I'd like to say that the SJPhone for Windows 2003 SE works with the universal *only in portrait mode*.
Has anyone [other than shamilsh] tried the ageet soft phone suggested in this thread?
Does Skype work over GPRS or just 3G?
Regards.
Just for text messages, skype is ok with GRPS - but for voice you need 3G oder WLAN.
Hi
Any sip cliente for wm5 that have G.729 (8 kbps) or G.723 (5.3 & 6.3 kbps codecs ?
sj phone only 711 or their own gsm....
Owl said:
Just for text messages, skype is ok with GRPS - but for voice you need 3G oder WLAN.
Click to expand...
Click to collapse
Is that need 3G as in would be slow, or need as in can't do it...
Just that GPRS is free for the T-Mobile plan I'm using, but think I have to pay for 3G (Relax + Web & Walk thing)
are there any programs that allow routing of the sound to phone speakers instead of main speakers?
Guys....just use sj phone with sip service from voipbuster.com and forget the rest.... and now you are talking....FREE and with free local rate call back number also...now...that ROCKS :twisted:
BR
I am running the CIngular branded ROM downloaded from this site and every sice the installation Skype will not work. Skype comes up and asks if I want it to connect to the cellular network and when I click yes it immediately says Cannot connet, check network settings.
Network settings are fine, IE works, OPutlook works, no problems.
Any ideas?
If you want to use Voip I suggest you use Sjlabs WM5 beta.
Skype is IMHO too heavy for handleds.
Skype that WORKS w/ Voice feature on PDA/Phone?
Dears,
DOES ANYBODY KNOW WHICH ONE DOES WORK WITH SKYPE VOICE??
I have been researching extensively different types of PDA-Cellsphone combos that WILL work with Skype-OUT/IN voice feature, the Skype.com site provides a list of ones that will not work (such as Jus-Jam and HTC TyTN).
Thank you.
Max
My first post in this outstanding forum
I've spent quite some time looking for programs able to run my SIP VoIP desktop client on Tynt. On WinXP I use X-Lite with VoIPDiscount and I know for sure it's possible to configure X-Lite with many other SIP based services like VoIP Stunt.
Is there a tested client for Tynt? All I've found was for PPC2003 and I got errors all over. Ideal'd be a client working with both UMTS and WiFi, but WiFi would suffice completely.
On the other hand, Skype works flowlessly
I use SJPhone:
http://www.sjphone.org/preview/ce/
You need to adjust settings to make it work correctly, also audio is a lot better with the USB headset, see this thread for right settings:
http://forum.xda-developers.com/viewtopic.php?t=59131
You can also use x-lite CE 1.01, find it here:
http://forum.xda-developers.com/viewtopic.php?t=58154
SJPhone all the way here too. It also works as a Vonage Softphone!
thanks guys. I saw SJphone but somehow I didn't manage access to the beta page.
I'll let you know
If your provider supports IAX protocol (which is much better while on hostile firewalled networks) my choice is http://www.voipsurfer.net/
My sincere thanks, guys I'm gonna try them all. At this point I created correctly the profile with SJPhone; the same profile works great with the windows client (after creating the profile I copied it to my desktop and the XP client accepted the profile like it was its own). After applying the profile the PDA client asks for id & pw, but I cannot register. Explorer is online so I know the internet connection is fine. I think I need some working yet.
I have managed to instal the pocketpc version of xlite and it works ok from the point of view of me trying to ring my home phone, it connecting and disconnecting ok and it registering as a broadband phone call through my isp when I check my online records.
The sound quality on the device is unusable.
When I use the supplied mini usb headphones I can hear the person I am calling very clearly but they can not hear me properly.
Can someone talk me through anything I can do to improve the settings so that I have a chance of using my device for voip calls whilst at home. I am not in the realms of anything to techincal though.
Hello everyone!
Situation: I have several VoIP provider (sipgate, 1und1...) My problem is I can only setup a single provider in my phone with built-in WM6 VoIP client.
Solution attempt: I set up an account with pbxes.org. There I added my SIP providers and an extension with username and password. Now I tried to set this up using the Sip Config Tool V2.0.1. Here are the settings:
Sip Server: pbxes.org Port: 5060
(tried others like sip.pbxes.org(com) and the IP)
username: username-extension_number
password: password
That's it. It's not working. The Today Internet-Calling-plugin tells me "searching....", but never to "selected"
I also tried using x-lite on my desktop pc. With the same settings I successfully registered and I was able to use pbxes just as it is supposed to be.
When using sipgate directly with WM6 it works, but not with pbxes.
I am kind of running out of ideas. So any help is really appreciated.
Thanks in advance,
Stefan
Tried several times as well on my S620.
Now, two days ago got a S710 and was curious to test VOIP on it.
Very first time I tried I was thinking everything was fine, at least nearly.
The Today plugin showed "Searching" (like with providers it works with)
The icon for Internet Phone showed up.
Unfortunately it "semi worked" only that time, any other tests I tried the Today Plugin didn't even get into "Searching".
The bad thing is that it did work once, like meaning it could work. Now PBXES status shows as Registered but it isn't actually. The other bad thing is that I tried to post in their forum for help but didn't receive much info back.
Bad luck, but I'll try and try again. Maybe newer files one of these days and our probs would be solved.
Ka.
Subscribe message
I ever check the message from sip server, I found that windows mobile voip client not only send register message, but also try to send subscribe message, I guess that it is reason that some sip server only may work as registra, and not handle correctly subscribe. it seems the reason the client always display "searching", I will try to modify sip server to support subscribe message in the future.
try fring
try using fring...
it supports multiple sip accounts.. and actually register u not just subscribe you.
You are right, Fring or any other 3rd party app connecting to a SIP server can work maybe better than the "builtin" SIP functionality but personally would prefer being able to use a solution where I dial like usual and calls get automatically router to VOIP, not having to switch to a separate app.
This is why I'd rather like the builtin sip stack to work on its own with any SIP provider. I tested it with PBXES but doesn't work. I'm currently renting a VPS with Asterisk (Trixbox) installed and it does connect. Only prob is that even if it manages to register, seems MS VOIP implementation is still not really compatible or suitable for the use I wish to have.
Ka.
This is an old thread but this is the same problem I have on my HTC HD2 (Leo).
Installed sip drivers and voip config cabs and configured it with my account through pbxes and it is not working.
Can someone help?
Android (Moto droid, HTC Hero) I had no problem with pbxes and sipdroid...
I have developed a simple client sip application on andorid by using SipDemo example which is provided by Google.
My application(everything such as Authentication, Streaming, ...) works perfect over my WiFi network, but when I switch it in 3G network, just authentication of SIP session works fine and the audio streaming does not work!!??
By the way I have a desktop client SIP application(written in C#) that works perfect with my android client app over 3G network, it means that streaming does not work when two client is android in 3G network, but when one of clients changes to my desktop SIP client application(written by C#) streaming works perfectly.
Does any body run SIP stack which provided in android 2.3 in 3G network? in the following links it's been told that Sip Stack does not work in 3G network, if so why I can use SIP in 3G network when one client is SipDemo and another is c# client in windows desktop application?
http://stackoverflow.com/questions/5139718/android2-3-sip-implementation
http://stackoverflow.com/questions/...included-in-android-2-3-does-not-work-over-3g
No body knows
Please someone gimme a hint (((
Why no one helps?
As I know, Google disable the option for the native SIP to work over 3G, in some deviced, the all SIP was disable.
Check that: http://www.inspiredgeek.com/2011/07...laxy-s2-sii-for-making-calls-on-wi-fi-and-3g/
Maybe it will solve your problem also.
alto said:
As I know, Google disable the option for the native SIP to work over 3G, in some deviced, the all SIP was disable.
Check that: http://www.inspiredgeek.com/2011/07...laxy-s2-sii-for-making-calls-on-wi-fi-and-3g/
Maybe it will solve your problem also.
Click to expand...
Click to collapse
Thanks for your reply but as I have mentioned SIP auth works fine over 3G and laso I can trace stream packets which is sent by client to another client, so it means it is not related to the "config_sip_wifi_only"