i've had an 8gb sandisk mem card for a few years. used to use it in the n95 then when i got the HD in Nov i formatted it and have been using it in there ever since. I've always had heaps of files and programs with no probs, then today i tried to access stuff via total commander and it's all gone bar a folder which is called Opera cache.
all the camera pics, installed pics, music, etc has disapeared, the card when used in a adaptor wont read in the computer, and when looking up settings via the memory function on the phone it says 'not installed'.
i'm running the Rom by Davideuck V7 MSVC for about a month with no probs previously.
can anyone tell m what the hell has happened? is my mem card stuffed or can i somehow get the data back? what concerns me is that the HD mem program wont read it nor will 2 of my computers
I had the same thing... Didn't manage to recover. I did have all of the info stored on my PC so I didn't actually lose anything, as such.
I never did find the cause or recover the data. I suspect that you will have to go to a professional data recovery agent if you want the pics back.
Sorry to hear your - well known - pain.
Nev
Pierced Soul said:
can anyone tell m what the hell has happened? is my mem card stuffed or can i somehow get the data back? what concerns me is that the HD mem program wont read it nor will 2 of my computers
Click to expand...
Click to collapse
There´s already a thread discussing this issue. Take a look at it:
http://forum.xda-developers.com/showthread.php?t=506560&page=1
Matthes42 said:
There´s already a thread discussing this issue. Take a look at it:
http://forum.xda-developers.com/showthread.php?t=506560&page=1
Click to expand...
Click to collapse
thanks for the link
King Klair Hero 0.6.01
First and Foremost this build was ported by Mssmison and the ril(radio interface layer), and audio libraries were written by Vilord!!! im pretty sure the gps library was written by Srwalter. vilord may have helped port it to eclair. (will get back to you on that). without DZO we would still be using windows mobile "" but were not ""
To Donate: to these fine gents visit http://sourceforge.net/apps/trac/androidhtc/wiki/WikiStart and scroll down to the donation links
B to the E to the T to the A
this is very beta, well almost alpha(first release for us vogue users so report any bugs that havent been mentioned in this post)
what works:
gps
calls
data
sync(dont sign in to google during htc wizard, wait till next boot!! you have been warned!!!)
market
gmail
what doesn't:
camera
bluetooth
gtalk
get more widgets
!!!THIS IS JUST A SQUASHFS BUILD AND MATCHING ROOTFS NO NAND!!!
This is too big to flash to the nand right now!
will add screenies later
for those brave souls:
0.6.01(few modifications by vilord to init.rc)
system.sqsh
http://sourceforge.net/projects/androidhtc/files/2009-12-14/system.sqsh/download
(vilords modified rootfs also in post #4)
rootfs.img
http://sourceforge.net/projects/androidhtc/files/2009-12-14/rootfs.img/download
ENJOY
Man, i love you...........
also big thanks to vilord, dzo srwalter and everyone i forget
Lookis like I gotta flash windows back to the Nand! Cant wait to try this out!
hey all, so uploaded to the sourceforge fileshare is an updated rootfs and another copy of this, version 0.6.01 I guess? should be no changes, but I haven't been able to test as I'm already late for work.
http://sourceforge.net/projects/androidhtc/files/
Oh yeah and yes I spent a few hours getting libaudio to where it is now, RIL require many MANY hours, but fortunately I'd already done that work, and it was a drop in with eclair... GPS is srwalter all the way, just a drop in here... the zImage has had many contributors, but mostly dzo.
contact sync should work, it works great on my end.
should this work on kaiser, too?
Hi,
How do we connect to the internet? It tells me to insert a sim card, but my phone is CDMA. I create an APN, but it still tells me to insert a sim card. Is there a work around for this?
Thanks.
scizzle said:
Hi,
How do we connect to the internet? It tells me to insert a sim card, but my phone is CDMA. I create an APN, but it still tells me to insert a sim card. Is there a work around for this?
Thanks.
Click to expand...
Click to collapse
ive only tested it at 320x480 i didnt think about 240x320. try changing the density to 120 if your are using 240x320
jamezelle said:
ive only tested it at 320x480 i didnt think about 240x320. try changing the density to 120 if your are using 240x320
Click to expand...
Click to collapse
Not entirely sure how that would fix the network issue. I originally had my res at 320x480 and 160 density and it still instructed me to inset a sim card. I have no data connection at all.
Looks good. Once the initial FCs go away it runs quite smoothly.
First issue I found was that the HTC Exchange app seems to be broken. It won't connect to the server.
skydirt said:
Not entirely sure how that would fix the network issue. I originally had my res at 320x480 and 160 density and it still instructed me to inset a sim card. I have no data connection at all.
Click to expand...
Click to collapse
I did originally also ask a question about resolution . But yes, I have no connection either.
UMMM....WOWW! McLovin it!! No sms errors er nothin!!
Great work!!
I have this partially working on the Kaiser, so I started a Kaiser thread about it.
Oh man, have you guys watched this build boot over adb? I think it's been 20 minutes and it's still churning these out:
Code:
V/MediaProvider( 1734): we got work to do for checkThumbnail: /sdcard/My Documents/My Pictures/IMAGE_261.jpg, there are still 130 tasks left in queue
E/MiniThumbFile( 1734): couldn't save mini thumbnail data for 88; disk full or mount read-only? class java.lang.NullPointerException
My sd card's not full, but it seems to be attempting to create thumbnails for ALL the photos on my SD card, but it can't, so it just goes on forever...
I'm also getting a lot of these after boot:
Code:
I/dalvikvm( 3020): Wrote stack trace to '/data/anr/traces.txt'
Should it be stack tracing? Do you guys want these logs?
The stack traces are probably for the NullPointerExceptions the thumbnailer is getting.
The swap on SDcard is activated in the custom.user.conf uploaded on sourceforge, isn't it?
I've read many times that it's not good for the SD. Can we use this conf file risk free or it's preferable to use a standard conf without swap?
By the way, thanks for this new hero build
No tattoo in the pipe?
@bri3d:
I don't think the stack traces are related to the thumbnails, the stack traces happen after the thumbnailing is finished, I haven't noticed a pattern yet. I also get a ton of WiMax daemon errors where it tries to start itself but can't, and tries to kill itself but can't since it never started. This build is still defnitely beta.
@Kiiv:
Hero builds are basically unusable without swap, if you don't want to use swap I suggest you use a normal Donut or Eclair build.
If you are worried about your SD card's life you can create a linux-swap partition as the last partition on your card and use the conf settings for swap partition. This is the setup I have, and you can grab an example conf file from my Kaiser thread for this build.
Thanks for the answer
I already have a swap partition, but I thought that break the SD card too..
This build is very promising, run very fast with swap.
I wouldn't worry too much about swap on the SD card - yes, it increases wear - anything which writes frequently to any type of flash memory is going to do that.
On the flip side, I've also never ever had a card go bad - wear-leveling and badblock marking keeps errors to a minimum these days.
I've seen consumer electronics do far, far worse silently - one media player settop I've messed with mounts an ext2 filesystem using a raw page driver (no wear-levelling) over and over - even if the FS is never written to it's hitting the same mount time bits every single time it boots.
Also, GBs of microSD are incredibly cheap now, and as long as you back up your important data it's not going to kill you to lose a card.
I keep getting a failed to find system.img on SD card errors.
I tried to rename system.sqsh to system.img and still no luck
does anyone know why when i run this it only loads up to the htc screen and then it just stays there? the htc animation keeps goin but thats all
My Elocity A7 tab does not have access to the android market so is there a way that someone (with a phone who has access to the android market) could download to a sd card and then I could put the card in my table and upload? I really want the subject apps.
I have the DISH Remote
slowtoappworld said:
My Elocity A7 tab does not have access to the android market so is there a way that someone (with a phone who has access to the android market) could download to a sd card and then I could put the card in my table and upload? I really want the subject apps.
Click to expand...
Click to collapse
View attachment com.sm.SlingGuide.Dish-e4df60e08b099e33d9df364707b47fb1.apk I think it let me upload the DISH remote access app....I had that because I work for DISH Network and it makes my job easier if I use it and are able to explain to the customer how to use it....but the Netflix I didn't have and when I go to the market all I find is the Queue App....if that is the correct app just P.M me because it is easier to remember to respond to that then it is trying to find the thread again.
Is there a way to store files from programs on the SD card. I am using Co-Pilot GPS and when I install the program on my tablet (from the SD card) it tells me to download the maps. The maps are also on the SD card but Co_pilot can't see them. I had tried to download direct to the tablet but the file is too big for internal memory so I had to download only my state. This has happened with several Apps that I tried to load. Is there a way to redirect the data to the SD and have the program recognise it. Do I need Dexters download??
Thanks,
John
jpsvnh said:
Is there a way to store files from programs on the SD card. I am using Co-Pilot GPS and when I install the program on my tablet (from the SD card) it tells me to download the maps. The maps are also on the SD card but Co_pilot can't see them. I had tried to download direct to the tablet but the file is too big for internal memory so I had to download only my state. This has happened with several Apps that I tried to load. Is there a way to redirect the data to the SD and have the program recognise it. Do I need Dexters download??
Thanks,
John
Click to expand...
Click to collapse
Sorry... I don't think anyone has figured out how to get app to work with the SD card yet. eLocity/Stream TV has not addressed the issue. I do believe Dexter is looking into it.
For now I have CoPilot running on my g -tablet, as I don't think it would fit onto my eLocity. You may be able to fit the US maps, but just barely (again just maybe, if the stars align just right). I believe it gives you the option to just download regions or states.
On a device with such little storage available this is a BIG deal!
RojasTKD said:
Sorry... I don't think anyone has figured out how to get app to work with the SD card yet. eLocity/Stream TV has not addressed the issue. I do believe Dexter is looking into it.
For now I have CoPilot running on my g -tablet, as I don't think it would fit onto my eLocity. You may be able to fit the US maps, but just barely (again just maybe, if the stars align just right). I believe it gives you the option to just download regions or states.
On a device with such little storage available this is a BIG deal!
Click to expand...
Click to collapse
Does Android have the ability to utilize regular Linux Links? If so, maybe you can install it minimally first with nothing else on the device and then move the directory to the SD card then link to it and add other maps. If that works it would free up local space and allow you to install other apps.
I am planning to transfer stuff to the hard drive and was wondering how can i mount the sd card so that i can transfer the data onto my tablet.
I am using Mac Lion OS on a macbook pro all help will be nice
vikramdhani said:
I am planning to transfer stuff to the hard drive and was wondering how can i mount the sd card so that i can transfer the data onto my tablet.
I am using Mac Lion OS on a macbook pro all help will be nice
Click to expand...
Click to collapse
In a nutshell - it's not supported but is doable.
Check out the xda thread located here - http://tinyurl.com/3as3xpu
Looks like a copy of XNJB might work, I however do not own any Apple hardware so cannot give it a shot myself. Might be worth a try! http://tinyurl.com/yaqhp5
Also, just to keep the mood light - this is the best Apple compatibility chart ever: http://tinyurl.com/3t79s4j
also forgot to mention
If you like, you can always use a flash USB stick to move files between your Mac and Iconia, or a USB hdd.
Try the free app on the Market, software data cable.
It sets up the Iconia as a FTP server that you can connect to with any FTP client ( Cyberduck works well on Mac, FireFTP plugin for Firefox etc). Works wirelessly, with any computer on same subnet, regardless of OS.
You only get access to the added SD card if the Iconia is rooted, and the app settings have root access checked. Look under /mnt/external_SD.
I believe the problem might possible go away with 3.2, but it has not arrived here yet to know.
Sent from my A500 using xda premium
entropy.of.avarice said:
In a nutshell - it's not supported but is doable.
Check out the xda thread located here - http://tinyurl.com/3as3xpu
Looks like a copy of XNJB might work, I however do not own any Apple hardware so cannot give it a shot myself. Might be worth a try! http://tinyurl.com/yaqhp5
Also, just to keep the mood light - this is the best Apple compatibility chart ever: http://tinyurl.com/3t79s4j
Click to expand...
Click to collapse
I use XNJB and it works for me running 10.6.8