Hi I uploaded a working cab for Name Display for Rogers and Fido subscribers.
I used the rilphone.dll from the new Rogers roms released. The corresponding radio is 1.14.25.55.
It should work for most custom and stock roms. The only problem I found was it doesn't show in the dialer for the new touchflo 3D roms but does show the name in the call log.
For people who don't know, Name Display is a feature in Canada that allows the name of the person to show on your screen even if they are not listed in your phonebook. Please keep in mind you have to subscribed to this feature.
I've never made a cab or anything like this before. I did it with alot of searching on xda and google. Luckily most of the work was already done by the guys over at the raphael and diamond forums. So thanks alot to them.
So try out the cab!
Make sure you install SDCERTS first!!!!!
Hi sundeep,
I installed your CAB file on my Generic X1i R3AA010 ROM. Name Display does work now, however with S2U2 enabled, I don't see the name of the caller. I'm sure this is a limitation with S2U2. I will try to send A_C a message to see if he can figure out how to enable it in S2U2, but if anyone else has any ideas, please let us know.
I also noticed that you incorporated the TrustTimeZoneField fix for the incoming SMS wrong time issue.
Thanks for packaging this up!
It might be an issue with how the visual aspects of s2u2 are aligned. For the new touchflo dialer, it doesn't show either but when you replace the dialer .png file with one from the vga dialer, it works perfectly.
Hey sundeep01,
could you link to the dialer .png file from the vga dialer?
Thanks
Sorry, i dont have that file anymore. It's not worth it anyway, it doesn't fit the screen fully and since its the only thing changed in the dialer it throws off everything else and the slider doesn't work.
Thx for the cab, I installed it and it works! However, I have the same problem with the new dialer not showing the name. It does show up in the call log so I know it works.
Anyone found a solution yet?
Ok this is really annoying! Evertyhing works except the incoming call, it just doesn't display the name! There must be a solution out there somewhere...
Hey folks, I've been using Name Display on my XPERIA for a while now. Christian has even cooked it into one of his ROMS!
Before that I used the Rogers Name Display cab from the Diamond. It's located somewhere on this forum and it works great. I do not seem to have the issue that you guys are having with the dialer (using the default dialer)
Thank you for this man! It works excellent!
thanks,
hope it will work
try.. it...
Related
Just upgraded to Sprint 6.1 Rom on my vogue and lost my dialer, anyone know where I can find it (CAB) again? I really dont like the new one since there is no "talk" button. Any help would be great. Thanks.
id be willing to bet google knows where that dialer is
Been looking for awhile now, maybe Google doesnt like me.... Thanks though.
Use the ppcgeeks kitchen, make yourself your own rom, unlock your device, put the vogue dialer in that ROM, flash and feel accomplished
ppckitchen.org
I'm not sure what is the name of the dialer though but it's included in open touch v4 rom for xda herald:
http://forum.xda-developers.com/showthread.php?t=377939
Frankly I really hated this dialer. The number buttons are small and very unresponsive. The color is not as pleasing. I recommend the iphone dialer of the newer minimal dialer.
that is actually the wm6 default dialer. I remember seeing a cab of it somewhere around here (for the wm5 folks)
This may be the cab you are looking for. From WM5.
I had to scout around and find it when i upgraded to WM6.
Cheers.
make the following edit in your registry and soft reset.
hklm\security\phone\skin\enabled = 0
thanks "black_mamba" @ ppcgeeks.
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab.
4. Copy the white background video buttons from this link (http://forum.xda-developers.com/showpost.php?p=3486541&postcount=36) to \Windows. (New screen capture had been added).
5. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Reserved for future needs
great work look nice
congratulation for your dialer
great work, i've been searching for this for long timee.. thx dude
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
Thanks for your work.
My Phone is Dopod 810 or Trinity
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
bigsilly said:
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
View attachment 112863
Thanks for your work.
My Phone is Dopod 810 or Trinity
Click to expand...
Click to collapse
Glad it works for you and thanks for using it.
nir36 said:
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
Click to expand...
Click to collapse
Glad it works almost perfect for you and thanks for using it.
thorfr said:
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
Click to expand...
Click to collapse
Thanks for the feedback that it won't work for ks20.
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
mimmo_kallon said:
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
Click to expand...
Click to collapse
Glad it works for you too! Thanks for the feedback.
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Francois57 said:
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Click to expand...
Click to collapse
Sorry, not too sure but if you think it is due to the two files, and if you have the right French files, pm me and let me know. I can change the two files for you and make a new cab.
Thank you for the proposal. I need first to find the 2 files.
zard said:
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Click to expand...
Click to collapse
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
nosedive said:
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
Click to expand...
Click to collapse
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
zard said:
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
Click to expand...
Click to collapse
yes i did ... i actually did remove the entries from my rgus from rom kitchen and did then cook it in, but still the same issue
i guess it has something to do with that reg-key HKLM\SOFTWARE\HTC\PHONE\NikeOptionOnOff .. i did set this to 0 and the phone did actually not dial after softreset - but still "auto-dial" when switching on from standby
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
kostas-k said:
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
Click to expand...
Click to collapse
Can you do a screen capture of the icons on the taskbar before and after you installed the dialer?
Thanks.
I'm sorry if my question here is already answerred, but i couldn't find where. Anyway, How can i disable manila sms inbox? I mean, when i tab to a message in sms tab of TF3D, i'd like to go directly to its thread in sms default window
Thanks in advance
Yes idem i would like !!
The TF3D text tab is annoying and pointless in my opinion.
Its one of the reasons why I turned TF3D off in WM6.5 - as it just goes straight into the windows mailbox.
cab from dutty
i remember dutty released a cab for this a while back with one of his roms, cant for the life of me remember what version it was sorry, the one downside of it was that it added a zoom function to the sms tab witch made the txt really big by defult.
ill see if i can find it somewhere and post back
Hey vodanhdaisu
http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
OR THIS for cab
http://forum.ppcgeeks.com/showthread.php?p=1009963
I've tested and the cab work fine....
Yes ;-)
seppi68 said:
Hey vodanhdaisu
http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
OR THIS for cab
http://forum.ppcgeeks.com/showthread.php?p=1009963
I've tested and the cab work fine....
Yes ;-)
Click to expand...
Click to collapse
they do nothing for 2.5 only 2.1...just tryed
MOD EDIT
Moved to general discussion forum as not related to rom development
So I did this little tweak, and it's perfect, exactly what I wanted. One problem remains, however, and someone referred to it somewhere that I cannot now track down. The font size in the text input area in the Windows threaded SMS view is now very large, and it prevents me from inputting very much text. Does anyone know how to fix this?
I checked the thread_style.css file, and it says the font should be 8pt Tahoma, which it definitely ISN'T.
seppi68 said:
Hey vodanhdaisu
http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
OR THIS for cab
http://forum.ppcgeeks.com/showthread.php?p=1009963
I've tested and the cab work fine....
Yes ;-)
Click to expand...
Click to collapse
THANKS FOR THIS! you have made me really really happy. I still use the old WM6.1 TF3d since it's much much faster than any of the newer ROMs and Manila versions. And this just made SMS exactly the way I like it.
I would like to up this thread because doesn't work on manila 2.5 :s
Can anyone help?
Thank you
Hi Guys,
I cooked a WM6.5.5 ROM build 23541 based on RUU_Rhodium_S2_HTC_Europe_2.07.401.1
Most of things currently works perfectly, with the exception to the incoming call screen position. This is a small gap from the top which looks not very good.
I tried to apply fixes ex. here: http://forum.xda-developers.com/showthread.php?p=5910397#post5910397
This solved for me the scroll bar and the softpad overlap issues but the incoming call screen is still wrongly positioned.
Could anybody help me in solving this issue?
Thank you in advance and best regards!
Lissek said:
Hi Guys,
I cooked a WM6.5.5 ROM build 23541 based on RUU_Rhodium_S2_HTC_Europe_2.07.401.1
Most of things currently works perfectly, with the exception to the incoming call screen position. This is a small gap from the top which looks not very good.
I tried to apply fixes ex. here: http://forum.xda-developers.com/showthread.php?p=5910397#post5910397
This solved for me the scroll bar and the softpad overlap issues but the incoming call screen is still wrongly positioned.
Could anybody help me in solving this issue?
Thank you in advance and best regards!
Click to expand...
Click to collapse
You should replace
cprog.exe
pimstore.dll
tpcutil.dll
from 235xx builds.
Pre-tested on 28232, 23106, 21636
At 23106 and 21636 should be replaced and lockscreen.dll
b16b said:
You should replace
cprog.exe
pimstore.dll
tpcutil.dll
from 235xx builds.
Pre-tested on 28232, 23106, 21636
At 23106 and 21636 should be replaced and lockscreen.dll
Click to expand...
Click to collapse
he said he was cooking 23541, why should he replace those dll files to fix position of incoming call screen? i assume the "fix" you are telling him to do is for the caller id problem with 231xx, 216xx, ect. but that isnt what he was asking.
as for helping you Lissek, sorry but i dont know a solution and as far as i know nobody has figured it out yet. you can try opening phcanrc.dll and some of the other dlls in the phone canvas pkg with a resource editor like restorator, this is how the scrollbar on dialpad was fixed...maybe there is something that can be done im just not sure.
twopumpchump said:
he said he was cooking 23541, why should he replace those dll files to fix position of incoming call screen? i assume the "fix" you are telling him to do is for the caller id problem with 231xx, 216xx, ect. but that isnt what he was asking.
as for helping you Lissek, sorry but i dont know a solution and as far as i know nobody has figured it out yet. you can try opening phcanrc.dll and some of the other dlls in the phone canvas pkg with a resource editor like restorator, this is how the scrollbar on dialpad was fixed...maybe there is something that can be done im just not sure.
Click to expand...
Click to collapse
yes you are right
i just read it fast..
do you have fix for 6.5.x and landscape incoming call?
First of all thank you guys for your help!
twopumpchump, I flashed your ROM and I see that you don't have a problem with incoming call screen position in your ROM. This is positioned perfectly well.
Mine is positioned a little bit too low and I simply see the fragment of the screen with the operator name in that gap.
I have that problem only on incoming call screen, dialer is positioned ok.
I tried to compare dialogs from phcanrc.dll you use with the one with my ROM and I see no difference.
Have you ever observed that in your ROMs?
Might it be related to the kitchen I use? I don't think so, but.. when I use osKitchen my ROM boots ok, but when I use EVK my ROM hangs on the first use screen once the progress bar reaches the end.
Lissek said:
First of all thank you guys for your help!
twopumpchump, I flashed your ROM and I see that you don't have a problem with incoming call screen position in your ROM. This is positioned perfectly well.
Mine is positioned a little bit too low and I simply see the fragment of the screen with the operator name in that gap.
I have that problem only on incoming call screen, dialer is positioned ok.
I tried to compare dialogs from phcanrc.dll you use with the one with my ROM and I see no difference.
Have you ever observed that in your ROMs?
Might it be related to the kitchen I use? I don't think so, but.. when I use osKitchen my ROM boots ok, but when I use EVK my ROM hangs on the first use screen once the progress bar reaches the end.
Click to expand...
Click to collapse
you are using fix from alex this package:
PACKAGE_RHODIUM_S2_Phone_Canvas_Enhancement_Fix_4_ 2_51720111829_0
and you still have the problem???? :S
B16b: unfortunately yes... I applied alex fix, but this solved only scroll bar and softpad overlap but NOT incoming screen position...
maybe you are using dialer from quilin or another? this is not a very big issue, but you know, I'm quite curious how to fix ;-)
anyway, I flashed recent NRGZ28 energy rom and saw that he has the same problem, so maybe this is somehow generic problem...
but at least I have my own 23554 based on EUR stock ROM, quite stable, and only with modifications that I really need and like
best regards b16b!
try putting this pkg to run after your phonecanvas pkg in kitchen.
twopumpchump said:
try putting this pkg to run after your phonecanvas pkg in kitchen.
http://forum.xda-developers.com/attachment.php?attachmentid=303452&d=1270305669
Click to expand...
Click to collapse
I'm trying to open the link but I'm getting info that I've no permission to access this...
you can get it here...
reversmoded your dll and replaced in the phone canvas package but it did not solve the incoming call position.. works the same way as with my previous one...
I use stock Rhodium Phone_Canvas_Enhancement_4_2_51720111829_0 with fixes from Alex. Do you use the same package?
Lissek said:
reversmoded your dll and replaced in the phone canvas package but it did not solve the incoming call position.. works the same way as with my previous one...
I use stock Rhodium Phone_Canvas_Enhancement_4_2_51720111829_0 with fixes from Alex. Do you use the same package?
Click to expand...
Click to collapse
i use the one i gave you, exactly nothing else....thats it.
Problem solved
I have finally solved the problem by disassembling phcanhtc.dll and hex editing the file.
For anybody interested in technical details of the solution:
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Lissek said:
I have finally solved the problem by disassembling phcanhtc.dll and hex editing the file.
For anybody interested in technical details of the solution:
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Click to expand...
Click to collapse
glad you got it worked out so is this one better than the one i gave you i guess? ive never noticed having the problem in my rom but i gave you the files i use and they didnt work for you upload the one you modded i want to compare to mine.
twopumpchump said:
glad you got it worked out so is this one better than the one i gave you i guess? ive never noticed having the problem in my rom but i gave you the files i use and they didnt work for you upload the one you modded i want to compare to mine.
Click to expand...
Click to collapse
Hi twopumpchump
We may use different ROM base and/or different patches... Maybe you use some solution like ameba for windows repositioning? But once again thanks a lot for your willing to help in solving the problem
Please find my file attached, the change is one byte at the address 1E494 (from 0x34 to 0x23).
Lissek said:
Hi twopumpchump
We may use different ROM base and/or different patches... Maybe you use some solution like ameba for windows repositioning? But once again thanks a lot for your willing to help in solving the problem
Please find my file attached, the change is one byte at the address 1E494 (from 0x34 to 0x23).
Click to expand...
Click to collapse
can you do the similar modification on this file from my HD2?
Incoming Call in Lanscape w Rhodium Phonecanvas!
Lissek said:
Hi twopumpchump
We may use different ROM base and/or different patches... Maybe you use some solution like ameba for windows repositioning? But once again thanks a lot for your willing to help in solving the problem
Please find my file attached, the change is one byte at the address 1E494 (from 0x34 to 0x23).
Click to expand...
Click to collapse
Just wanted to say thank you. Now have incoming call in landscape with rhodium phonecanvas.
Just use the new Phone Canvas 5
WBR
Siemens Lover
SiemensLover said:
Just use the new Phone Canvas 5
WBR
Siemens Lover
Click to expand...
Click to collapse
I couldnt get landscape to work on that. Did you happen to have landscape working on it?
ai6908 said:
I couldnt get landscape to work on that. Did you happen to have landscape working on it?
Click to expand...
Click to collapse
NO landscape support!
WBR
Siemens Lover
Asked this before in another thread and i was supervised to come here.
I have problem with wm default call history window where backround is not in right place.
Screenshot here.
Cooking with osKitchen.
ROM's 235xx with no Manila, but Titanium only.
Phone_Canvas_Enhancement_4_2_51620111831_0 + SergeyLAR FIX.
Tried other phone canvases too with same problem.
Tried Ameba position fix and it worked partly...
With ameba position fix
picture 1
picture 2
picture 3
Can someone tell me how to fix this small, but annoying problem?
Thx.
its a non fixed trouble in newer builds... dunno why they missed up that screens (they "MSFT") if any fix is posted in other thread we will post it for sure.
+ Que PPC said:
its a non fixed trouble in newer builds... dunno why they missed up that screens (they "MSFT") if any fix is posted in other thread we will post it for sure.
Click to expand...
Click to collapse
Thank You for clear answer.
Xinot said:
Thank You for clear answer.
Click to expand...
Click to collapse
well it is possible to fix it. should be done by someone who knows hex editing
look here
http://forum.xda-developers.com/showpost.php?p=6178217&postcount=14826
I don't know how so i think i'll wait...
btw. Is there a way to replace wm contacts with HTC one without manila?
Xinot said:
I don't know how so i think i'll wait...
btw. Is there a way to replace wm contacts with HTC one without manila?
Click to expand...
Click to collapse
can u ellaborate more on what u want i am not gettin u
srgudhka said:
can u ellaborate more on what u want i am not gettin u
Click to expand...
Click to collapse
Sure i can. Basically this to this.
Or at least contact editor etc links from wm default to htc ones.
Xinot said:
Sure i can. Basically this to this.
Or at least contact editor etc links from wm default to htc ones.
Click to expand...
Click to collapse
those are the new contact cards which are cooked into the rom. u can ask the chef to cook it in the rom
srgudhka said:
those are the new contact cards which are cooked into the rom. u can ask the chef to cook it in the rom
Click to expand...
Click to collapse
Now i didn't understad what you try to say...?
Sure i cook and it's all working with manila, but what i want is make it to work in Titanium only rom. Or is it possible at all? Contact & group editors are there in windows folder and are working ok, but how do i make them work by default? So, when i press add new contact in wm contacts list, how i get this new contact manager to open by default, not wm contact manager.
Xinot said:
Now i didn't understad what you try to say...?
Sure i cook and it's all working with manila, but what i want is make it to work in Titanium only rom. Or is it possible at all? Contact & group editors are there in windows folder and are working ok, but how do i make them work by default? So, when i press add new contact in wm contacts list, how i get this new contact manager to open by default, not wm contact manager.
Click to expand...
Click to collapse
new contact card need to be cooked in the rom. there are no cab files where you can install that.
srgudhka said:
new contact card need to be cooked in the rom. there are no cab files where you can install that.
Click to expand...
Click to collapse
Oh, of course... I have New_Contact_Card cooked in, and it is working ok if i start it straight from windows folder via ContactEditor.exe. Problem is how do i make it work like default editor in normal usage?
A guy posted a solution for the call history in phone canvas.. for HD2 he said pm me if you want to nknow more about to fix it...
here
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
+ Que PPC said:
A guy posted a solution for the call history in phone canvas.. for HD2 he said pm me if you want to nknow more about to fix it...
here
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Click to expand...
Click to collapse
Thx for the tip.
+ Que PPC said:
A guy posted a solution for the call history in phone canvas.. for HD2 he said pm me if you want to nknow more about to fix it...
here
http://forum.xda-developers.com/showpost.php?p=6258611&postcount=15249
Click to expand...
Click to collapse
That is for incoming call position fix, not the call history
We still need an expert!
Is there anybody out there, who can fix the problem in the picture?
There is no working fix for Phone Canvas 4_0_52619192725_0
... for wm 6.5.x
Package is QVGA, fixes exist only for vga, wvga, etc....
Call history position is not aliged well, there is a small bar on the top, and an overlap on the bottom.
Please, somebody help fix this for QVGA users!
Yes, this is very annoying bug. I'm using now WM default dialer because of this position problem, and with WM dialer this call history window is in right place.
edit: What i know, there is no fix for any resolutions for call history. At least i have not found it in my WVGA Topaz...
The call history has to be fixed in the same file that the incoming call fix is in
weird... wich version is that? im on hermes QVGA
I have HTC Mega 4.0.52619 phonecanvas and my call history looks diferent than yours
look the pic but my button is not fixed yet scrollbar ok, position ok, caller id no fixed, neither the sipad button.
+ Que PPC said:
weird... wich version is that? im on hermes QVGA
I have HTC Mega 4.0.52619 phonecanvas and my call history looks diferent than yours
look the pic but my button is not fixed yet scrollbar ok, position ok, caller id no fixed, neither the sipad button.
Click to expand...
Click to collapse
Phone Canvas 4_0_52619192725_0 from device MEGA
I have no idea why yours looks different
I got it!!! its due to the xtask app... this app has a positioning fix ... thats why my history screen is position fixed and as a n aside efect the buttons shows a lil then dissapears.. so... i dont care