hook Tilt to '05 Mustang Shaker 1000 - Tilt, TyTN II, MDA Vario III Accessories

Hi, does anyone know how to hook a ATT Tilt to '05 Mustang Shaker 1000 stereo? I'd prefer to not do the FM transmitter if possible.

I have an '06 Mustang with a shaker 1000 system. I use a media gateway from best buy that hooks into the back of the radio. I has an Ipod usb interface and a 3.5mm headphone jack. All I have to do is press the sat/aux button(AUX is the button on my stereo, some say SAT) When I get Home I will post the part number and brand. What color is your mustang?

reply
Hi, Thanks for the reply. Its Torch Red. Pics of it are here:
http://www.flickr.com/photos/[email protected]/sets/72157618995122107/
I think I found it. Is this what you have? http://www.icarkits.com/product_info.php?products_id=3411

That's it. It easy to install, you just have to take the center console out. It works well.
Nice car!
Check out my pics.
http://s566.photobucket.com/albums/ss110/cbarrilleaux/

EliotGT said:
Hi, does anyone know how to hook a ATT Tilt to '05 Mustang Shaker 1000 stereo? I'd prefer to not do the FM transmitter if possible.
Click to expand...
Click to collapse
Did you get it done yet?
I used a P.I.E. adapter that fits into one of the sockets behind my Shaker 500. Then the car harness just plugs right into the P.I.E. harness... no splicing.
I hooked up the Tilt output on a miniusb-to-3.5mm adapter with built-in mic that I got (originally for T-Mobile G1). That way I can take calls using the stereo. Even on my convertible 'Stang it works very well. Just can't go 90mph with the roof down or your caller won't hear a thing you said ;-)
I mounted the phone to the stereo using a Panavise metal bracket... looks *very* clean and it's very sturdy. No holes drilled, connects to stereo bolts. The phone mounts to the black metal bracket using a generic PDA "vent" holder I found at Target. I ripped the vent clips off and used some small screws to fasten it to the Panavise mount... rock solid.
I have the extra cable wrapped behind the mount so that I can take the phone off the mount, stretch the cord out & place the phone on the passenger sun visor so my kids can watch movies from the back seat using the car stereo for sound. Works like a charm!
Every person who's seen it up close says the same two things: 1) How'd you do that? & 2) I'm gonna do that for my car!
This is a pic of my prototype... the final setup has less wire exposed and the adapter's mic facing the driver.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

joihan777 said:
I'm gonna do that for my car!
Click to expand...
Click to collapse
thats awesome right there!

The only thing wrong with that is it's in a Mushtang . Good job.

ycode90 said:
The only thing wrong with that is it's in a Mushtang . Good job.
Click to expand...
Click to collapse
Don't bother knockin' a 'Stang.
Any car in the same class as the Mustang will be defeated. Mustangs start out with a fun little V6 and end with GT500's & Cobra-Jet editions that can easily POP-A-WHEELIE going down the track. No little-boy honda or corolla-on-crack can match that. Even a regular GT500 will go toe-to-toe with an M3, for about $10k less.
And you Moped & Bow-Tie boys have your days numbered.... the next gen powertrains come out next year! Let the battles begin (in a humane, legal sort of way... of course ;-)

Bah I'll keep my 19 yr old Taurus.

Hey, your Taurus is a very sturdy car! S.H.O. by any chance?
Our next family car will either be a Taurus or a Flex. The Sync system teams up with your Tilt via BT and works well or so I'm told.
If you want to mount your Tilt to your dash, try Pana-Vise for a VERY sturdy mount... it's the backbone of my setup.

Yes SHO FTW.

Related

Brodit Active Car Mount-modded with audio/charging

Here's the short tutorial on how to modify a Brodit/Proclips active car mount to work with an HTC y-cable. This allows you to slide your Kaiser into the device holder, and have audio out capabilities while charging.
First, you need to use a knife to separate the top plate from the charging plug. Slide your knife gently between both sides to completely separate it. If you look carefully there is a thin line between the top plate and the bottom mount.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once you've removed the top plate, you'll see the usb charging cable:
Remove it and get the y-cable ready to install. You need to remove the rubber casing around the end of the y-cable in order for it to fit correctly:
Once installed in the holder, it should look like this:
Use some type of adhesive to reattach the top plate:
Here's the finished product:
Tank you very much for your work. I've got my active car-mount yesterday and will mod it this weekend!
Bye, Peter
Glad to see that you had success, I will mod my active cradle now.
I think I am gonna use the one modded like this on my desk - I still can't see a decent landscape desk cradle on the market, so I think this mod + a bit of lead + some of that polymorph stuff I use in my passive holder version of this mod will make a nice desk cradle. I could link it into the stereo so I can choose songs on the phone while I game on the PC
URPREY said:
Here's the short tutorial .....
Click to expand...
Click to collapse
Will get mine on Friday..
Looking now for...
http://www.dal-tec.com/smarteq.asp
or
http://cgi.ebay.nl/THB-Bury-UNI-Sys...ryZ35193QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
any expierences with that or simalar units from other brands?
This ruins the 12V cable originally supplied by Brodit/Proclip, correct?
No - I put a little bit of heatshrink tubing on the exposed metal part that doesn't go into the phone, and I'm using it as the charger still.
Hey guys/gals...
I bought a Y cable for my Tilt and when I plug it in to my phone and plug in an audio connector to external speakers and the power charger to the other side of the Y, I get charging, but the audio still comes out of the phones speaker and not to the adapter? Is there a setting I have to change to stop the audio from coming out of the phone and divert it to the audio out adapter?
Thanks for any help!
Congratulations!
You have given me the confidence to get on and do mine. Spookily, yesterday my audio output from IGo started being fed to my car speakers via bluetooth for no apparent reason! Getting the nav instructions is my main purpose here. It wont last Im sure . .
Use the BT Toggle app someone here designed. It works GREAT!!
ANyone know why audio won't come out of the Y splitter for my Tilt? Do I need to switch something on/off in the phone to divert the audio from the phones speaker to the audio jack?
Thanks
Did you verify that it works on another HTC phone? It's just plug and play on all of my HTC phones.
Nice Modding guide...
may do this, but can you tell me if the Brodit/ProClip stuff puts the Kaiser in a good enough position to use it's built in GPS?
Sure, it works just fine where it's mounted.
mega_jamie said:
Nice Modding guide...
may do this, but can you tell me if the Brodit/ProClip stuff puts the Kaiser in a good enough position to use it's built in GPS?
Click to expand...
Click to collapse
Just got back from a 650 mile round trip weekend, and YES, the Brodit/Proclip put my Tilt in a perfect place for the satellites/GPS to work wonderfully.

Stylus as an FM antenna (WORKS!)

yup, that's right the stylus included with your X1 with very little help will act perfectly as your FM antenna, all you need to do is use the end of a zip tie or similar object to prop it towards the back of the phone jack.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If anyone has a better Idea of what to use to prop it in place, I'm open to suggestions.
Also remember since your not actually using headphones you will have to switch to speaker output.
how about just using your headphones?xd
I dont like using headphones, also, my main headphones are BT and therefore wont act as an antenna. I usually have zip-ties on me either in my car or my house so its easier for me than carrying around headphones just to make the radio work.
I'm not carrying my headphones the whole day, so it is a NICE TIP
And with fotos
I like the idea, I'll gice it a try
You should write a tutorial LOL sticky plz JAJAJA LOL
turnstar said:
yup, that's right the stylus included with your X1 with very little help will act perfectly as your FM antenna, all you need to do is use the end of a zip tie or similar object to prop it towards the back of the phone jack.
If anyone has a better Idea of what to use to prop it in place, I'm open to suggestions.
Also remember since your not actually using headphones you will have to switch to speaker output.
Click to expand...
Click to collapse
will the FM radio panel work with this? it usually asks that one plug in a headphone in the jack right?
Dunno if this will damage the jack or not.
RageDemon said:
will the FM radio panel work with this? it usually asks that one plug in a headphone in the jack right?
Click to expand...
Click to collapse
Aye aye Sir, yes you bet it DOES work !! (already tested)
gtrab said:
Aye aye Sir, yes you bet it DOES work !! (already tested)
Click to expand...
Click to collapse
Thanks!
allright!! , gotta go find me one of those zip ties!
Mini antenna SONY branded
What about this one ??
It's a SONY
And works
Nice, haven't seen that before.
Link..Model #?
I actualy use an old pair of headphones and just cut off the wires leaving just the plug. Works a treat.
Dev
gtrab said:
What about this one ??
It's a SONY
And works
Click to expand...
Click to collapse
WHAT IS THAT?????
Please elaborate; thank you in advance
It seems to work, but the question is it safe? it is short-circuiting the jack, will this have some bad effects on the x1?
vagelis said:
WHAT IS THAT?????
Please elaborate; thank you in advance
Click to expand...
Click to collapse
It's a fancy SONY mic I bought several years ago. Been somewhere around for a while untill I saw this post and BLING I remembered I had it
LOL you are bloddy creative!!!!
this is the best method to trash your female jack on the phone lol
I like that... Great Ideal!! looks nice and clean. I like the zip tie method as a quick fix. Thanks for the insight.
mcbyte_it said:
It seems to work, but the question is it safe? it is short-circuiting the jack, will this have some bad effects on the x1?
Click to expand...
Click to collapse
totally agreed ! the best way to generate unknown behavior or soldier/jack attaching issues !
What about ohms & other stuffs.... even if it is a low current... I really prefere the Sony Anthena !
thedeva said:
I actualy use an old pair of headphones and just cut off the wires leaving just the plug. Works a treat.
Dev
Click to expand...
Click to collapse
And how do you ensure the sound comes out of the phone (if you've fooled it into thinking you've got the headphones connected)?
Duh! You press the speaker icon in the bottom left corner of the radio panel.
@OP: Great idea, but I guess it's safer to use a pair of "trimmed" old headphones or your original headset.

Media dock: Line out and EB13

Unless there is a Contra code to get it working, these stupid incompetent assholes still have this disabled in Froyo.
styckx said:
Unless there is a Contra code to get it working, these stupid incompetent assholes still have this disabled in Froyo.
Click to expand...
Click to collapse
I can't get it to work either. I have a feeling the car dock will have the same issue.
mattallica76 said:
I can't get it to work either. I have a feeling the car dock will have the same issue.
Click to expand...
Click to collapse
ugh.... i'll seriously have a ****fit if this is true. i had it in the cradle before but i dont' have a 3.5" to RCA cable laying around.. was too late to buy one. let me ask you a question though.. when you put the phone in the home dock is there anything in the status bar that indicates that you are docked? because with the car dock a little steering wheel pops up and the status bar dims and says it is in car mode. then it keeps the screen on for the duration. however the dock no longer enables the "car dock" software that i installed way back when, before it was pulled from the market. i have no problem with that as the software sucked. anyway i was hopign that that the status indicator was an indication that the audio woudl get routed correctly.
I had the dock audio working intermittently on a D17 ROM i believe. Have you ever gotten it to work? I bet if more people had the OEM dock this problem would have a proper community solution by now. Perhaps we could take up a collection to buy a willing dev a dock.
I just tested both my car dock and desktop dock...
Results are not promising, folks.
I plug my phone into the desktop dock, the phone acts like its charging. Plugged into the car dock, the steering wheel appears in the notification bar, but audio is still routed out of the phone speaker.
This sucks, Samsung. Another promise unfulfilled.
Sent from my SPH-D700 using Tapatalk
mykie242 said:
I just tested both my car dock and desktop dock...
Results are not promising, folks.
I plug my phone into the desktop dock, the phone acts like its charging. Plugged into the car dock, the steering wheel appears in the notification bar, but audio is still routed out of the phone speaker.
This sucks, Samsung. Another promise unfulfilled.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
ok this is just upsetting. i paid fifty bucks for that damn car mount a while ago. its the main thing i wanted from this update!
did that samsung john guy completely dissapear? i'd love to blow up his inbox
That sucks that the audio out still doesn't work. Alternative is just positioning the phone wth the audo and usb ports on the other side of the mount and not using the usb adaptee that is attached to the mount.
Sent from my SPH-D700 using XDA App
juanaraya92679 said:
That sucks that the audio out still doesn't work. Alternative is just positioning the phone wth the audo and usb ports on the other side of the mount and not using the usb adaptee that is attached to the mount.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
yeah but i wouldn't have spent fifty dollars to do that
murso74 said:
yeah but i wouldn't have spent fifty dollars to do that
Click to expand...
Click to collapse
It's bad enough everyone who bought it has to lay down layers of tape on one end so their volume doesn't get turned all the way down.
I actually took a dremel and carved out the volume rocker grove deeper.
It's amazing how awful they are.
Something has to be done about this. Anyone who bought it deserves a full refund.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

New use for Samsung Car Dock

Today I moved my car stereo lower in the dash and mounted my Samsung Tab car-dock in the original stereo location.
Took me all of about an hour, cost me $10 (in addition to the dock I already had). I am fairly pleased with it.
I was glad to find that I did not have to extend any of the wires going to the original car stereo. They were plenty long enough to put the stereo down in where the little pocket used to be. All I had to do was cut the back of the plastic pocket out, and use the stock bolts to bolt through the plastic in to the body of the stereo. Part one done...
Then I used a piece of 2 inch wide steel bent in to form as a bracket for the Samsung dock. I mounted the new bracket to the original stock stereo mounting bolts. Then I cut a piece of black plastic to entirely close off the double din opening. This was hot glued and epoxied in to place from the rear so it is nice and clean. Part two done.
I then had to cut the last portion of the Samsung Tab mounting arm off. All I needed was the small portion where the dock actually bolts to it. This allowed me to still use the swivel to get the right mounting angle. The ONLY issue I had was that I wanted to mount it close enough to the dash that I had to cut a notch in the stereo bezel to accommodate the power cord to the dock. Not a big issue, and from the driver side its not visible at all.
I then mounted the dock to the bracket through a small hole I cut in the piece of black plastic I had mounted.
Originally, the TAB was mounted via the dock on top of my dash. I like this position much better!!!
Here is the end product.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry, I meant to post this in accessories. Can a mod move it for me?
Does the tab tie into your stereo over bluetooth or a line out? Or do you just use it for navigation?
Works perfectly via bluetooth. I was having some skipping issues, but they were cleared up with the last update of Car Dock. They now turn off wi-fi when in dock, which is what was causing the issues.
Very nice setup. How does the navigation work on the SGT.? i.e. is there any delay or lag. are you on Edge when using the nav.?
StarLog said:
Very nice setup. How does the navigation work on the SGT.? i.e. is there any delay or lag. are you on Edge when using the nav.?
Click to expand...
Click to collapse
Google Navigation works as well on the SGT as any other phone - better in fact due to the higher resolution of the Tab. Just needs a reasonable 3G signal - which isn't hard to find. For me it's the best satnav software out there.
I live in Southern CA, so there is no issue with getting a signal. The Navigation works perfectly for me. A couple years ago I spent $2000 for an indash navigation, DVD player. What a waste that was... Its amazing how technology has changed in just a couple years.
I now have full Internet, navigation, phone and multi-media capabilities in my dash AND its removable!
Very nice work. The scarf is a nice touch too.
interesting, Ive never thought of installing it there.
rangercaptain said:
Very nice work. The scarf is a nice touch too.
Click to expand...
Click to collapse
Thanks... at least you didn't call it a handkerchief... You silly guy!
Hey op..
Do you have this connected to your radio or is it stand alone...
i want to do something similar but I want to use it as my stereo as well....
thanks
P.
He said he plays through bluetooth to his car speakers.
Sent from my SGH-T959V using XDA Premium App
Thanks I see I overlooked that...
Sent from my SGH-T849 using XDA App
very very nice. I'm looking to do something similar in my old Corsa. What version of car dock is that?, look different to mine - i use the overcome rom
what app are you using there?
The Ap. is CarHome Ultra. Auto-launches when plugged in to the dock.
Thanks for sharing your DYI
Wow, it looks nice on your dashboard. I'll try to replicate this when the dock is available in my country (Thailand)
which car dock is it?
Hey guys,
I'd like to know which car-dock are you all referring to?
Thanks!
can you send a picture fo your dashboard dude?"i have the carkit but it asnnoys me on my glass.
ameer1367 said:
can you send a picture fo your dashboard dude?"i have the carkit but it asnnoys me on my glass.
Click to expand...
Click to collapse
You cant see the two pictures in the original post?
Are you asking for a different angle? I dont think I understand...

Custom Dash Instalation progress (ford explorer 07)

i decide to mount my xoom on my dash so i been working on that
here are some pictures for the progress i will update this daily
this is the main idea of how i will change my dash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the original dash
the xoom size
just need to trim the dash
check if the xoom fit
start with fiberglass
cut the fiberglass
making the front
i still need a lot of work i will add a phone base (defy) inside the tablet , need to wired a lot of stuff to charge and audio from both devices , add a mic for the phone without losing the OEM stereo
reposition the stereo and all the switch´s , buttons i remove from the dash ,
need to bondo the dash and lot lot lot of sanding
Exactly what i will be doing when the new ride arrives.. Will have to use a 7 inch tab though
Time to get PARANOID bout your ANDROID
Any updates? I'm always intrigued by xoom car/truck integration posts. I'd probably attempt something similar if my G8 didn't rely on the stock screen for HVAC control.
interesting post - will subscribe for updates
Today I will post the rest of the pictures I just need to wet sand to finish it
Sent from my Xoom using Tapatalk
Are you planning to use an OTG adapter mounted in the bezel for USB device hosting? That would be icing on the cake.
Actually I did use the otg also a extra mic, charger, phone base, with charger and audio jack for calls
Apps, tasker, tablet talk, musicpro, waze, and many others
Sent from my Xoom using Tapatalk
Also I forget , I'm gonna use a web cam for a reverse camera, just need to find the correct cable to turn the webcam on/off adding a relay
Sent from my Xoom using Tapatalk
ok lets continue
this is the modification to add my phone base a defy with a custom rom CM7
adding some fabric to avoid scratch
adding bondo and the charger and ogt and a lot of sanding
almost finish but need more sanding
testing some audio connection
adding the usb extension
taking apart a phone charger
taking apart a phone handsfree and remplazing the mic for one bigger
testing the color of the paint still need a lot of wetsanding
adding the new mic to the dash
im still working on the oem stereo adding the switch i remove from the stereo dash
i will add the pictures in a few hours
continuation
the audio and chargers installation
the audio connection phone/tablet/cd changer
the new stereo place and switch
testing the final mount
this is gonna be the phone place i add this cuz if i dont like to take my xoom one day i still can use my phone as head unit
this isn't finish i still need a lot of sanding the worst part and painting this paint is only cuz i get tired and wanna see how will look finish but is far to finish yet , need to add some extensions for the switch
so far the sound is great thanks to tablet talk i dont even need to see my phone anymore , and tasker allow me to turn on off the tablet when the car start
with tasker i add some profiles to turn wifi tether when the charger and audio jack in place on the phone
on the tablet i did more profiles , for day and for night
like turning the screen on while charging, change cpu , brith auto off etc ...
i still need to find the shell command to unmount a usb to adding to the profile but is not a big deal
all this is thinking to remove the audio jacks after i get a xoom dock right know is to expensive in my country to get one and the shippings are to high if i order in other place so until the price get low.
i will take apart a xoom dock and use the circuit to remove the outside jacks for the xoom
looking good - cant wait to see what it looks like 100% complete

Categories

Resources