my diamond takes very long time to get files from pc via actvesync or disk drive mode. iam facing this problem from the first day i got this phone.sometimes the trasfer even doesn't complete.
can someone help me out with this?
Make sure you're using a USB 2.0 port on your computer. I suggest plugging it directly into a computer port, not into a hub.
Other than that I don't have any suggestions. Do you have problems with other USB devices on your computer? or is it just the diamond?
I am running Vista Ultimate and in "Activesync" it's pretty slow, but "Disk Drive mode" is fast; comparable to a USB flash drive.
Related
Help
When i plug my hd2 up to my pc and select disk drive i cannot see it on the pc but my friend has ame phone and his works ok, What sthe problem with mine??
bump need help please
it may be a problem of the usb cable. i noticed that my pc does not recognize my phone when i use another usb cable that does not come with it. so, i always use the usb cable that comes with it. hopefully, this works for you.
Does anyone know if the microSD and/or USB Flash drives show up as USB drives on PC? Do the standard Android development tools connect-up through the USB and 'just work' like they do for my phone? I assume that the miniUSB plug is the one that connects to your PC since the other are listed as 'Host' on the Notion Ink Tech specs page.
you would connect to computer with the miniusb, the microsd would mount to computer just as it would with a phone. that would be nice if a usb flash drive did to but i'm not sure about that.
Hi im new here
I got my hd2 when it first came out running winmo 6.5 now i just cant connect it to the computer tried more than 1 computer and more than one cable when i connect it only charges i receive nothing on the computer like i used to before i have tried everything in the setting usb to pc still same thing
please help me how can i connect it
and i also tried hard resetting it more than once same thing
under settings tab -----other , there will be a usb to pc button
I bet you have tried all setting changes so since you have done a hard reset and it still doesnt work, it has to be your micro USB cable. I had the exact same problem as yours and i feared that it was the micro USB port that was faulty. But then i tried a different micro USB cable and it works perfectly. Hence, it is likely to be your cable. Im not bad mouthing HTC because of the amazing work they have done, but their accesories seem to be a bit down on quality. My original micro USB cable is now frayed and almost severed, my Touch HD micro USB is also frayed and the original earpiece is now experiencing audio balance issues.
the thing is the cable that comes with the hd2 i lost it but when i was using it i could connect
but now im using nexus one cable and Nokia n900 cable to connect to the computer and it just charges like i said nothing appears
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
If your HD2's USB port doesn't work you can connect to ActiveSync via bluetooth. I do that very often for a quick synchronization, and since HD2 has an Activesync profile it's easy to configure...
Anyway, check that "accept USB connections" option is selected in your pc ActiveSync configuration.
Most probably, he's facing the da** usb port breaking issue.
kawshigan said:
Have you tired different ports in your computer or tried reinstalling the drivers? To do that, uninstall the Activesync or Windows Mobile Device Center in your PC and reinstall it. Then try. If you still cannot connect your HD2 to the PC for USB mode, then im afraid the micro USB port in your HD2 is faulty. Try the above. Meanwhile, use the SD card method for flashing or transfer files using wi-fi or bluetooth.
Good Luck
Click to expand...
Click to collapse
from where can i download windows mobile device after uninstalling it?
You will find it here.
Thanks for everyone who hellped it turned out nothing was wrong with my hd2 cause i tried connecting my cousins hd2 using the cable i use it didnt work
turned out i must connect the original hd2 cable
My device connects fine, and I am selecting "Media Device (USB 3.0)" on the phone itself to make sure it is using 3.0 mode. It goes into airplane mode (as it warned me about on the first use), but it transfers files no faster than when connected to a USB2 port (~5MB/s).
Any ideas? Is there some special software/drivers besides the official Samsung drivers for Windows to get the benefit of USB3 transfer speeds?
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?
joinsudhakarreddy said:
Guys I'm trying to connect my phone to laptop but phone doens't get recognised in the laptop. The device makes sound and so does the laptop. No pop-ups in either of devices. The phone starts to charge but no option in the notification shade to change the mode of connection though. I've tried with turning on the usb debugging too, but no help.
Laptop pups up an error message later that the "LAST USB DEVICE YOU CONNECTED MALFUNCTIONED. WINDOWS DOES NOT RECOGNISE IT".
Is this falut of my charging port or of laptop? Or windows 10?
I've tried connecting to all other ports and with different cables. My all other android devices connect though. Please help.
Click to expand...
Click to collapse
1. Enable USB Debugging in developer options
2. Download and install ASUS USB Driver from asus website like below. Search for ASUS_Android_USB_drivers_for_Windows
www+asus+com-in-Phone-ZenFone_5_A502CG-HelpDesk_Download
i am newbie, replace + with . & - with /
james11705 said:
I've had this issue with pen drives and my USB port had an issue(short circuited).
Check these :
Try running devices troubleshooter from control panel.
If the phone is charging properly by using the same cable , it's probably an issue with the laptop.
Is it on pie?
Click to expand...
Click to collapse
Sir I've tried debugging thing already and set the option to MTP. I've run troubleshooter too but windows couldn't identify and solve the problem. I'm guessing the problem is with windows 10. So I've decided to installed windows 7 in a different drive. Maybe that'll solve the problem.
Phone is running on Oreo.
Note:- I think micro usb has four pins. One among them might be a ground pin. One must be for charging and other must be to transfer data. Correct me if I'm wrong.
I had several times repairing phone with broken micro usb connector, it has 5 pin to be soldering on it. 2 for the power and 3 for data transfer. If the cable is fine for other devices then maybe the problem is not from the cable itself. I had an experience like that case before that if the notification from the pc says connected device is malfunctioned, that may caused by when u first time connected the phone to the pc, the device is disconnected when it still trying to instal the driver. When u connected the phone to pc check on the device manager, if u see "!" icon there, then theres the problem, ur phone driver not installed properly, u can try manual instal of device driver from there.
Last usb device you connected malfunctioned. Windows does not recognise it
"USB device not recognized. The last USB device you connected to this computer malfunctioned, and Windows does not recognize it” always appears in Windows 10 and Windows 8.
And the reasons for the issue contains:
The currently loaded USB driver has become corrupted or unstable
USB drivers need to be updated
USB drive may be entering selective suspend
USB has some damaged files or bad sectors
USB drive has not been formatted correctly
For different reasons, you need to take different measure, but you can directly format it via AOMEI Partition Assistant to solve the usb device not recognize issue.
The USB port itself was damaged. So I got replacement and now the new phone works fine with same laptop. Thanks you all for your replies.