Did anyone have this problem?
When i had R2 firmware it disappeared after like 2 months, then i moved to custom R3 ROM, it was there for about 2-3 weeks and now again, bluetooth is on but there is no icon at the top of the screen!
Once I had this problem too, changing randomly some bluetooth related registry entries fixed it but I am not sure which one did the trick.
so, can anyone provide tips how to get that icon back?
Thanks in advance.
I have the same problem, bluetooth keeps on randomly disabling itself. Any ideas?
looks like the only way out is to update firmware or just to re-install it.
*signed*
Some days ago I updated my x1 via the SE Update Service, since that bluetooth stays in the state I set up.
Related
I posted this in the BT thread, but no response. Maybe this will do. Hope someone can help me out
I read the same in a couple of posts for the new BT stack: I got the patch, installed it, request comes where to install, tried several places, nothing seems to happend (also after reset).
Also, sound is gone now. No ringtone, voice and music playback. There was a thead that discussed the same problem, but no solution other than hard-reset.
bt stack: BCHS_FOR_POCKET_PC_OZONE[1].ARMV4
I got the 1.13WWE/1.12R ROMs
tanx!!
Backup?
What about backups? the author recomended to backup your ppc bevor trying. I did so and was happy about that! This Stack did not work on my magician. nothing changes except the mentioned problems appeared...
But regarding your Question: I think there are two ways of getting rid of this porblem:
1) Hard Reset
2) Install a backup
I know this is not the answer you hoped to receive...but it is what i encountert :evil:
backups? what's that? :lol:
Yeah, I know, didnt make a recent one, so I'm the one to blame , but I read a post somewhere that restoring a registry backup did the job and the sound was back again. So, what's different between the faulty registry and the good one??
TCPMP problem with BT stack
wen u press the power button to go sandby mode the audio on tcpmp disappears
ronski said:
Also, sound is gone now. No ringtone, voice and music playback. There was a thead that discussed the same problem, but no solution other than hard-reset.
Click to expand...
Click to collapse
Go to the "Audio" tab in Bluetooth settings (manager) and uncheck the "Automute" checkbox. That should be enough.
I wish I could, but there isnt an extra tab which has that option
ronski said:
I wish I could, but there isnt an extra tab which has that option
Click to expand...
Click to collapse
Then your installation is probably faulty... I guess, the only option is to unistall and reinstall, which I think cannot be done without a HR. Sorry...
I'm afraid that is the only option left, the problem occurd after the installation of the new BT stack: BCHS_FOR_POCKET_PC_OZONE[1].ARMV4
it asks for an installation target, but none seems to work, though files are installed and registry is changed (I see the new files in some entries), I see no new options in the BT menu
PROBLEM SOLVED!
I solved the problem!!!!
First, I used this in registry to disable the installation target request of the CAB file which does the BT stack installation:
http://www.pocketpctweaks.com/pocketpc_tweaks/force_install_location_prompt.html
Second, I installed the BT stack again
Third, I have al the options!!!!! disabled the Automute, but still no sound
Fourth, I use my labtop as a headset, connected, dailed, and got sound on my labtop!! Disconnected, turned up the volume, AND VOILA!!! SOUND!!!
happy I am, no hard reset needed
& also see this
http://forum.xda-developers.com/viewtopic.php?t=29219
Just thought I'd bump this thread to say I had exactly the same problem, and could only resolve it by restoring from my weekly auto backup.
I have the aforementioned bluetooth stack installed, but I've had it installed for ages now. Automute was not checked. Checking and unchecking automute did not fix the problem.
Originally, the sound volume slider was moveable, but it would always return to the lowest setting whenever I clicked out of the volume box. I used the Bluesoeil switcher to change to the Microsoft stack, but this didn't fix the issue. Neither did switching the stack back.
It did change the fact that I was able to move the volume slider and not have it return back to the lowest setting immediately after changing. Despite this, sound still did not play, except via bluetooth.
Backing up and hard resetting fixes the issue. Last weeks backup is fine.
I can honestly say I didn't change anything. I woke up this morning and it was like that. Sound was working fine the night before.
Hi guys, I'm new to the forum so please forgive me for any mistakes. I searched the forum but I could not find any related topic so I decided to post a new thread. Anyways, my tytn is new (2 weeks old) and sometimes hangs when going to stand by mode. I tried to dissable the "turn off devise if not used for.." option and turn it off (stand by) manualy by sigle pressing the power button. But guess what nothing happented!! I could not turn it on and I had to do a reset again. It is so annoying, I am missing calls, sms etc because my device hangs and stays off! Anyone experiencing the same problem? Is because the ROM version? (My ROM version is 1.18.255.3). How can I fix this problem? Thnx
I have occasionally experienced this problem and have tracked it down as a fault that only occurs when I have the wifi connection activated. I keep the wifi off unless in use the problem disapears. Hope this helps
wifi is off at all times. Actually I've never used wifi with tytn
Are you running Today plugins from memory card? One of the reasons Tytn hanging is related to that. Put these plugins into main memory until a future ROM is correcting this problem. Good luck!
I have also had this problem. Activesync was the culprit. I make sure I always close AS after syncing instead of minimising. In addition I delete the event that starts activesync (repllog.exe) in my notification queue. No freezes while on standby for almost a week now
I made a thread about it here : http://forum.xda-developers.com/showthread.php?t=278968
thx guys! I'll try and reply back
Seems to me cdyat was right. Thanks for the tip!
Everyone,
I have a strange problem with my prophet, I have tried about 3 diff wm6 roms so far from this site.
And once flashed my phone randomly seems to wake up.
The screen will flash and turn on for now apparent reason.
Any thoughts?
My mate who has a wizard has the same problem.
cheers,
Mike.
Could it simply be the active sync error (it keeps automatically starting up)?
If so, just do this:
Open Activesync on your device and tap on Menu>Add Server Source. Add any info to create a fake server sync. After that is complete go to Menu>Schedule and change the two dropdowns to "Manual" and tap "ok" at the top right. You can now go to Menu>Options and delete the Exchange Server setting you just added.
I have the same problem since I installed WM6 Underground yesterday.
I've tried your solution but it doesnt work (it still occurs after a soft reset).
Anyone else has a solution? This is so annoying
Try locking the device
I have noticed the same thing but it's going away if I'm locking the phone (only the power button remaining enabled).
yes this is happening for me using the ASERG 3.12 WM5 ROM.
It's really irritating as it seriously drains the battery. Went down about 30% last night.
Also waking up means running all sorts when the phone is in my pocket.
Short battery life causes me big problems as I travel a lot......
I'm thinking of going back to one of the less troublesome WM5 ROMS. I gave up with WM6 due to the loss of BT, GPRS and Wifi settings after a soft reset.
I'm sure one of the geniuses will fix all these issues soon.
cheers!
this has been fixed - http://forum.xda-developers.com/showthread.php?t=299069
Your waking up problem could be an faulty radio side-effect, it thinks it is receiving a call or sms and wakes up.
The most reliable radio rom right now is 2.61.21. You can upgrade to that without losing any data, and it fixes all call and sms, BT and Wifi issues. I applied that to a Jester's WM5 and solved all my problems plus got a better battery life.
Using a T-Mobile (USA) MDA, HTC Wizard, with the last official T-Mobile ROM, version 2.26.
Just very recently, Bluetooth often stops working, and I cannot get it back on again.
I try various ways of turning it back on. For instance:
1) The BT icon in the tray using the "Battery Status Today plug-in. (Actually I have the newest one, now called "Home Screen Plus Plus".)
2) An app called "Bluetooth Toggle, an icon to click that should switch BT ON and Off.
3) Comm Manager
4) Settings, Connections Tab, Bluetooth settings.
None of those work. In any of them, when I click where ever one should to turn on BT, the screen freezes there, only to be resolved by a soft reboot.
Sometimes on rebooting, BT is working again, but other times not. In fact, for the last several hours today, I have not been able to turn BT on again at all, despite reboots.
Does this sound like a hardware problem, or could it be something that could be resolved through software?
Any suggestions, registry tweaks, etc.?
I guess I could try a hard reset or reflash. But before trying something that drastic, which would require reinstalling all my apps, reconfiguring, etc., I'm wondering if there is something else I can try.
Or, if it's an irrepairable hardware problem, then I should perhaps look for another phone as soon as possible, as I want to have BT. I was waiting though, for a good new 3G WM phone to come out on T-Mobile in the next months. So, I would rather fix the MDA to use for a couple more months, rather than getting a Dash or Shadow now. (Wouldn't get the Wing, as I would prefer my next phone to be smaller and lighter than the MDA.)
Any suggestions on what to try, to see if I can get BT working again?
The change often seems to occur on re-booting. BT is working fine. On re-booting the MDA, BT is off, and I cannot turn it back on, as described above.
However, sometimes on rebooting again, it turns back on.
Any explanation for this?
Hello,
Few days ago I've found that my phone drained my battery. After a lot of experiments and rebooting I have found that my phone doesn't sleep. Problem with enabling of Bluetooth and disabling doesn't helped. I'm using default widget for enable/disable, and switch pro result the same. (Yes my first Bluetooth usage was happened few days ago). After rebooting problem disappear till enabling bluetooth again.
On the top of prevent sleeping list (accordingly spare parts) is android system.
So my question is:
Does somebody have met with the problem that just after enabling (disabling) Bluetooth phone never will go to sleep?
Please could somebody verify this issue? Or maybe you have some suggestions instead of hard reset?
Thanks.
my firmware is native updated Android 2.2.1
I've tried hard reset and it doesn't help, I have pure device just two installed application: android system info and spareparts for system monitoring. No one paired bluetooth device, just enable.... So looks like problem in HTC firmware but I'm wondered so many people using it and nobody have noticed that...