Hello everybody. I bought a used as new vodafone v1605 on ebay, I have just received it and everything seems to be working fine except for the camera. When I press the button it says something about wrong shortcut (and I already wnet to the buttons and changed to camera again). When I go to the camera through the menus and select the camera aplication it doesn't open! I tried with both WM 5 from vodafone and WM6.5 and the same situation happens. What can I do?
Related
ive just realised the green call/send button on side of mda pro doesn't work i think it stopped after rom update but not sure as its a new phone and i didn't test it beforehand !!! any ideas anyone?
Is there any way of assigning Speed Dial (not Voice Speed Dial) to a hardware button?
Why do I want to do this? I'd like to be able to press a button which would bring up the Speed Dial list. I would then use the jog wheel to scroll through the list and scroll-click to dial that number.
With the phone application open to the keypad press the d-pad left and it brings up the speed dial list.[ Power>Green Phone>Left D-Pad ]Three buttons but still pretty quick.
quicker: power->green phone->jog wheel DOWN (or UP for call history)
Hi all,
I've lost this shortcut (Green button->left D-PAD) and I don't know what happened. As I lost also the Smart dialing menu item. It happened to me once before I upgrade my ROM which returned that back. Now I lost it again and I am going crazy trying to know how this happened or which application I installed did that.
Do you have any idea?
Thanks in advance
ISnowmanI said:
Hi all,
I've lost this shortcut (Green button->left D-PAD) and I don't know what happened. As I lost also the Smart dialing menu item. It happened to me once before I upgrade my ROM which returned that back. Now I lost it again and I am going crazy trying to know how this happened or which application I installed did that.
Do you have any idea?
Thanks in advance
Click to expand...
Click to collapse
With an unaltered Ext_ROM, a hard reset should do the trick.
I don't know if I am missing something, but neither of the key sequences suggested (Power>Green Phone>Left D-Pad or power->green phone->jog wheel DOWN) do anything at all on my Hermes. I even tried a Soft Reset before trying these sequences and nothing happens.
I'm running the latest (South African) HTC ROM, as posted here, if that makes any difference.
Philip said:
I don't know if I am missing something, but neither of the key sequences suggested (Power>Green Phone>Left D-Pad or power->green phone->jog wheel DOWN) do anything at all on my Hermes. I even tried a Soft Reset before trying these sequences and nothing happens.
I'm running the latest (South African) HTC ROM, as posted here, if that makes any difference.
Click to expand...
Click to collapse
Not sure what is happening there, because I have not used that ROM. Did you install all the cabs from the extended rom? If so, it may be that this was left out of the South African version for some reason. My TyTN is out for repair/replacement due to SA issues and I can't check it, but I think the latest TyTN ROM functioned this way. My 8525 with latest Cingular ROM certainly does.
Hello, i've just got my HTC P3600 and i was playing around with it's camera (i was rotating the dial jog while using the camera to be more specific) when a message appeared on the screen saying: "Cannot initialize the gps service" and there is also a "done" button which doesn't work at all.
i've already tried a soft reset but it didn't solve the problem.
can anyone help me out?!?
thanks
Antonio
ps: my phone is flashed with dopod's rom.
tonheko said:
Hello, i've just got my HTC P3600 and i was playing around with it's camera (i was rotating the dial jog while using the camera to be more specific) when a message appeared on the screen saying: "Cannot initialize the gps service" and there is also a "done" button which doesn't work at all.
i've already tried a soft reset but it didn't solve the problem.
can anyone help me out?!?
thanks
Antonio
ps: my phone is flashed with dopod's rom.
Click to expand...
Click to collapse
xou can try two things: 1. go outside and wait until gps is found (could take 15 minutes) 2. press the cancel button
the cancel button wasn´t working either.
anyway, the problem is solved. i was trying to press all the buttons, when i pressed the one which change between the two cameras the message went out.
I have htc wizard with wm6 by faria. Yesterday I bought bt8010 and it all works good, but i realised that i don't have speed dial. I searched forum and install "Voice_TRI.cab" but it didn't work with the button on headset. So i've tried next "CVSD_for_WM6_v1.2_build_61226_1.cab" and this work very good. But after reset i have half icon of connections, and don't see volume and clock icon, but they are there, becouse when i click there i see menu with options to it. Do anyone know how to repair it ? i've tried deleting and installing next time but it didn't work out my problem...
wacki4 said:
I have htc wizard with wm6 by faria. Yesterday I bought bt8010 and it all works good, but i realised that i don't have speed dial. I searched forum and install "Voice_TRI.cab" but it didn't work with the button on headset. So i've tried next "CVSD_for_WM6_v1.2_build_61226_1.cab" and this work very good. But after reset i have half icon of connections, and don't see volume and clock icon, but they are there, becouse when i click there i see menu with options to it. Do anyone know how to repair it ? i've tried deleting and installing next time but it didn't work out my problem...
Click to expand...
Click to collapse
I´ve the same problem with my htc hermes (o2 trion).
I´ve installed LVSW(2007/04/08) RUU_Hermes_WWE_3.24.0.4
Anyone an idea?
Hi
My beloved HTC Prophet is stuck at 'Tap Screen to Align'
History:
It fell from my hands and hit the floor with set facing down, touch screen stopped working at once, hardware buttons were working but I couldn't use the phone as I had placed a password for unlocking
I connected it through USB and used mobiler .... everything else except the touchscreen was working fine
I did a hard reset by using MOBILER
unfortunately my cell does not go fwd from 'Tap Screen to Align' as it doesnt accept any Taps
Repair:
I went to (an unauthorized) repairing shop where they instantly replaced its (upper) touch screen, but in vain.... they say they cant understand the problem
Kindly help me ... I dont want to lose my beloved prophet
Looking forward to your help
Bilal