Database Users

Dopod Suffer mobility

Hi
My XDA Neo locks on splash screen (Dopod Enjoy mobility) and windows mobile doesn't start.
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 2.15.13.27
When reset sometimes it even omits the radio ROM GSM 02.19.21 numbers which usually comes between the SPL and OS.
Now every time after restart it displays Rom versions and then the display fades in a very strange way creating random stripes of a different color each time and that is where it gets Stuck, no response nothing. Sometimes it goes to a white screen and sits there. Can not enter to the system Windows Mobile 5 it stops at bootloader screen.
I tried to upgrade with the NoVendor ID ROM,it was upgraded successfully but the problem remains same.
Now I am in < Dopod Suffer mobility> state.
Your help or advice will be greatly appreciated.

Hi, i have the same problem on my G4.
Suddenly screen start becaming white with some vertical colored lines.
No respond.
Tried to HardSPL, SoftSPL, remove battery, flashing different ROMS, disassemble to check if any HW visible problem.
Sometimes this phenomena apper on splash screen (only solution is reset and/or remove battery).
Sometimes load everything, the stuff can be used until the "randomic" effect
What the hell can be?
I read other post with people mentioning the same problem, but up to know no useful solution.
Any help will be appeciated
Thanks

OS Launch death

My friend has an Orange M600 (UK G4) variant of the prophet.
I’ve done the recovery flash of the device and just re-flashed it with the orange ROM.
Problem is, I’ll get the splash screen saying orange…. But after a while a line appears across the screen (vertical if that makes any difference) and the screen then fades to either a black screen with an orange line on it or a white screen with a turquoise-ish line on it. The only way to turn the device off is to remove the battery.
Here's the info from the splash screen
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
Any ideas what the problem could be, and where and roughly how much it could cost to repair? Thanks for any help guys and girls

MonkeyBone said:
My friend has an Orange M600 (UK G4) variant of the prophet.
I’ve done the recovery flash of the device and just re-flashed it with the orange ROM.
Problem is, I’ll get the splash screen saying orange…. But after a while a line appears across the screen (vertical if that makes any difference) and the screen then fades to either a black screen with an orange line on it or a white screen with a turquoise-ish line on it. The only way to turn the device off is to remove the battery.
Here's the info from the splash screen
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
Any ideas what the problem could be, and where and roughly how much it could cost to repair? Thanks for any help guys and girls
Click to expand...
Click to collapse
Ever tried flashing with an AKU ROMS? the one that I used to repair my bricked Dopod 818 Pro G3 is with this ROM from l3v5y found in his thread here. Another thing, in my experience, if u want to flash your device in a dead state, you have to enter the SPL mode (Hold COMM button while turning on, you'll get a screen with 3 color.), after you flashed back to the NVID (No Vendor ID) ROM, then you can easily flash any ROM that you prefer given that you have HardSPLed your device once or JumpSPLed if that doesn't work, read this thread here. Hope this helps.

Yeah, unfortunately that's part of the recovery flash
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
It won’t boot with any ROM on it, can get to the splash screen but then it just fades to previous motioned screens....
I ran out of ideas (apart from poss hardware failure)
I wish these were like the universal... easy to fix, flash etc

Bootscreen changing

In this case of my O2 XDA orbit 2, I wanna change the first screen when starting up (the bootscreen, shows an O2 image with firmware, radio, rom info, etc, version info in the corner).
I've already searched and all I could find was info for changing the second splash screen and the option for having an animated image.
http://forum.xda-developers.com/showthread.php?t=317726
http://forum.xda-developers.com/showthread.php?t=296481&highlight=bootscreen
So I'm asking once and for all for me and others as well. Can it be changed and if so how?

Try Advanced Configuration Tools 3.3.0
Download link:
http://www.touchxperience.com/downl...ion-tool/Advanced_Configuration_Tool_v3.3.cab
to enable, disable, change boot screens etc..
personally I did not test it I Use the Tool Above for other purposes, but I saw there is also this option...
..........OR...........
Just use the artemis splash screen tool 0.7.1
It is a .NET Framework 3.5 application - you need the Microsoft runtimes.
Also do not forget the USPL flash

For me.. when i upgraded to different ROMS.. it automatically changed all the tym.. so now the default blue o2.. is nowhere..

Terrarist said:
In this case of my O2 XDA orbit 2, I wanna change the first screen when starting up (the bootscreen, shows an O2 image with firmware, radio, rom info, etc, version info in the corner).
I've already searched and all I could find was info for changing the second splash screen and the option for having an animated image.
http://forum.xda-developers.com/showthread.php?t=317726
http://forum.xda-developers.com/showthread.php?t=296481&highlight=bootscreen
So I'm asking once and for all for me and others as well. Can it be changed and if so how?
Click to expand...
Click to collapse
use the splash screen changer .... change all boot up screen from pc ..... no need to edt any files on artem*** ......... pm me if u want that

Am golden now. It worked differently with the 3 different roms i was running. Now I've changed the initial bootscreen and the animated one. All's left is the secondary boot screen (this is usually the windows screen)

varungupta07 said:
use the splash screen changer .... change all boot up screen from pc ..... no need to edt any files on artem*** ......... pm me if u want that
Click to expand...
Click to collapse
please send the the link for the spalsh screen changer...

Splash screen

I hate the Win 6.1 crappy splash screen
With my Hermers I used to flash the splash screen with some other pictures
However if I ma not mistaken, as long as there is no Hard SPL for the Rhodium we cant really do that
Is there another method ?

Download Advanced Config Tool 3.3....latest version.
http://www.touchxperience.com/en/ad...vanced-configuration-tool-33-cab-install.html
Once you install it...it should be under the HTC Splash screen and Windows Splash Screen.
You will see the files and then you can do what you want with it

Shame on me I have the tool and didnt even checked it !
Thanks a lot (Feeling like a lazy bastard...)

Thanks I didn't know you could do that.

Custom Splash Screen

Since we get no love from the touchscreen people, I have modified a few of the spash screens found on here to fit our 320x240 screens.
I have an Ozone and there are 3 different splash screens the phone goes through at boot up:
1. HTC splash
2. Animated VZW splash
3. WinMo slash
Replacing the WinMo splash is easy. Just overwite \Windows\ms_splash.png
I can't find the image for the HTC spash screen though aywhere on the device.
Can somebody shed some light on this one?

i dont have any answers to your question but i do appreciate the splash screens you posted!

I found some answers here: http://forum.xda-developers.com/showthread.php?t=551651
But as usual, only led to more questions.

brent372 said:
Since we get no love from the touchscreen people, I have modified a few of the spash screens found on here to fit our 320x240 screens.
I have an Ozone and there are 3 different splash screens the phone goes through at boot up:
1. HTC splash
2. Animated VZW splash
3. WinMo slash
Replacing the WinMo splash is easy. Just overwite \Windows\ms_splash.png
I can't find the image for the HTC spash screen though aywhere on the device.
Can somebody shed some light on this one?
Click to expand...
Click to collapse
The green WM6.1 spash is a .nb0 file. The black HTC splashes are ROM parts 0x600 and 0x601 flashed onto the device. You already know ms_splash.png.
Check this out to make your own splashes, but beware, flashing ROM parts incorrectly could brick your phone.
http://forum.xda-developers.com/showthread.php?t=551651