Help after flashing haykuro latest build touchscreen comes and goes, so I flashed the dudes latest thinking the problem was haykuros build. Any ideas what would cause my touchscreen to work on and off?
Related
** MODS can you please move this thread to the Q&A section please?**
Hi everyone,
I've been having a bit of a problem since I've updated my phone to Froyo. I'm having the problem where I can use my camera w/out a problem but the minute I switch over to the video recording mode, everything locks up and the phone resets on me. Has anyone encounter this issue before and if so what was the remedy. I did try to revert back to the latest 2.1 and updated to 2.2 but it still was the same problem. Thanks in advance for your time and input.
Below is a quick background on my N1:
-Unlocked boot loader and rooted the phone.
-Did run a custom rom ( before 2.2) at one point but went back to the stock rom
- No Radio has been updated from the upgrades I've done (not that i'm aware of).
- Baseband version 32.24.00.22U_4.03.00.21_2
- Kernel Version - 2.6.32.9-27227-g3c98b0d andriod [email protected]#1
- Build # FRF91
Been covered numerous times, you need to upgrade the radio.
Update to the froyo radio!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
futango said:
Update to the froyo radio!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Thanks futango i'll give that a go.
Hey all, I have a Red lens Motorola Defy. I bought it a while back, it started having the earpiece problem, and when i tried to fix it, it messed it up even more. long story short, i fixed it now and im looking at putting this rom on it, with the jellyx kernel.
I have seen several people in the rom's thread stating that the 22/12 build of the rom still worked with the kernel but later versions of the rom did not, so that is the version i would like to get.
what im confused on is, I can't find any files that say 22/12 or anything close to it in the OP's dl link. also, can i just use the latest kernel build, or is there a specific version of that i need as well?
some info:
it is currently running cm7
I think it is running clockwork recovery (probably pretty old version)
as stated above, it is a red lens version
EDIT: i got it working. I found the 22/12 rom build. turns out i was looking in the wrong folder. for anyone else with the same kind of questions:
-yes you can just flash the cm10 nightly
-no you dont need a specific build of Jellyx (as of 01/09/12)
-yes is it smooth as hell
Hey there,
I am an active reader of this forum for 4 years now - thank you for all the information - and have a uncommon problem with my nexus 4,
yesterday i upgraded my purity rom to the actual build and have no cellular connection since then 8excuse me for my english right away)
What seems to be a trivila problem is kinda tricky (of course a looked a lot for possible causes and resolves in the forum).
the problem is: i have flashe the actual bootloader, radio and made a factory image flash and my nexus is working when on stock rom.
but when i flash a custom rom - i tried purity, psx and cm 10.1 - the cellular connectivity and in some cases wifi is gone. once i flash the factory image everything is fine again.
can you imagine a possible explanation?
one more information: when flashing the new purity update, i accidentally flashed not the current one, but the 2 month old version... but i allready made a clean-flash, wiping everything and flashing just the rom.
i'm on the most recent bootloader, radio und cwm-recovery
Any idea? Thanks in advance...
alex
update to latest recovery for either cwm or twrp its a common issue that many have posted issues about
hey,
it worked, reverted to an earlier cwm build and it works again. thank you very much
Hi Everyone,
I've been running CM 11 since I got this phone a few weeks ago. I installed it on the first day.
One thing I didn't think to check to make sure was working when I got it (it was a refurb off Swappa) was that the vibration was working, so I don't know if this is caused by CM or if it's a known issue.
Does anyone else have this problem and it's part of CM or do I need to reflash to stock and check to see if it's a hardware issue?
Thank you.
EDIT:
If it matters, I have the Verizon version.
Bumping - I'd really like to avoid flashing to stock and having to re-root and go through the whole process just to verify if my vibrate is working.
Hey guys, I've been using CM13 builds on my Nexus 6p for last few months. Generally, i flash new builds after 3/4 days from the last one. Everything's works fine, no big issues; but recently from last months build which ever update i flash on the device, the WiFi seems not working. It shows, it's on - Searching for Networks; but not able to connect or even find any network at all. And i tried to flash back to the older builds of CM13, the WiFi works fine on those builds quite fine. Beside this, I've tried Paranoid Android ROM on this device, WiFi works fine on that rom. So, have any of you faced such problem on CM13? And, please can anyone help me out on this matter?... Thanks in advance...
rudra_666 said:
Hey guys, I've been using CM13 builds on my Nexus 6p for last few months. Generally, i flash new builds after 3/4 days from the last one. Everything's works fine, no big issues; but recently from last months build which ever update i flash on the device, the WiFi seems not working. It shows, it's on - Searching for Networks; but not able to connect or even find any network at all. And i tried to flash back to the older builds of CM13, the WiFi works fine on those builds quite fine. Beside this, I've tried Paranoid Android ROM on this device, WiFi works fine on that rom. So, have any of you faced such problem on CM13? And, please can anyone help me out on this matter?... Thanks in advance...
Click to expand...
Click to collapse
I've been successively flashing the nightlies from 07/24 until today and have had no issues with Wi-Fi. Sounds like yoh crossed over drom June to July build. Flash the July vendor image then re-flash latest cm and you should be good to go. If you use a custom kernel also make sure you are using the latest version made for this month.
blitzkriegger said:
I've been successively flashing the nightlies from 07/24 until today and have had no issues with Wi-Fi. Sounds like yoh crossed over drom June to July build. Flash the July vendor image then re-flash latest cm and you should be good to go. If you use a custom kernel also make sure you are using the latest version made for this month.
Click to expand...
Click to collapse
Thanks a lot, brother. I've just flashed the latest vendor image, and it's working smoothly...