Hi,
I have a HTC Touch Cruise 09. and applied the caller id solution wherein you need to change the CallIDMatch in the registry but im not sure if it works.
im from the philippines and our number format is +63 917 3232643 or 09173232643. im not sure what value to use in the value data, is it 7 or 10? pls help!
thanks!
Pao
if i use 7 as my value data.
if the number 09173232643 (without country code) is saved in my phonebook and i use the fix above, it works for some contacts but not all and if the number +639173232643 (with country code) is saved in my phonebook and use the fix above, it doesn't work! is there a permanent fix for this? if yes, how can i fix this with either number saved in my phonebook? pls. help!!! need it asap!
is there a fix for this?
is there a rom that can fix this? HELP! probably a rom based on the caller id of WM5?
caller id in wm6.1 fix
well you need to set the "HKCU\Control Panel\Phone\CalIidMatch" value to match the mobile number length without the country code but with the local code ex. 00cccXXXXX is your mobile with country code so your local number is 0XXXXX.
in the case of static_mp3 above his local number is 09173232643 so he need to set the value to 11, then he need to go to programs->contacts, then Menu->Options, then set his "Area code:" to 63
Related
anyone knows that?
What do you mean? By a program you are writing or just because you dont know your IMEI?
As for the program, I dont know, the last thing I touched was Visual Basic 6 a couple years ago...
As for the IMEI in general: dial " *06# " (without the quotes) and it will display the IMEI. Or check the package of your device, its written on it as well or as a last resort, remove the battery, there is a sticker on the back of the device carrying the IMEI.
Settings --> Device Information --> Identity
i Want to replace my imei because i want to use the Gps software.The licence need it
nosure said:
i Want to replace my imei because i want to use the Gps software.The licence need it
Click to expand...
Click to collapse
You want to spoof your IMEI for the software??
or
You want to actually change your IMEI on the device ??
which one?
Wizard service tool is what you are lookin for!
http://forum.xda-developers.com/showthread.php?t=329170
Do not forget to note your current IMEI!!!
I want to actually change your IMEI on the device .
Wizard service tool can`t for polaris,i think...
nosure said:
I want to actually change your IMEI on the device .
Wizard service tool can`t for polaris,i think...
Click to expand...
Click to collapse
Yes it does not work I have tried it. BTW does anyone have anytool for changing imei?
hi,
guys, you don't need to change phone's EMEI. What you need is to use MultyDID app (see the link for procedure http://forum.djawir.com/smartphone-...99-my-collection-smartphone-apps-games-5.html ). This program perfectly works for NAVITEL NAVIGATOR GPS-program, and I'm sure it will work for other GPS-apps as well.
Rgds.
change imei
i use mtty's mb command to peak into the memory and found the address for the following...
9DDD6C-9DDD7C: CID (ie. HTC__001)
9DDD7C-9DDD89: IMEI
9DDD94: SECU_FLAG (ie. 0 or 1)
i tried using mw to write the memory but the value wont stick... anyone know how to make the values sticky?
^^^ does anybody know?
For what purpose would you want to change the IMEI number for this way?
If a software will not accept your phones IMEI number you should contact the manufacturer/retailer. If it being installed because it wasnt meant for that particular phone then I'm afraid you should look elsewhere for solutions.
Guys, I'll be honest with you changing IMEI numbers to install software sounds like what it is without having to spell it out and I would be grateful if we wouldnt encourage it here on the Polariis forums by entertaining these type of posts.
Many thanks.
Hello,
is there a way to change the format of contact number from (XXX) XXX-XXXX to smthg else like (XX) XXXXXXXX ?
thank u
You can change format of phone numbers etc under start-->settings-->system-->regional settings. Take a look there.
I did however there is no option to change the format of the phone number
Hello my friend,
First, this topic is not in order to ask " How to change IMEI device", because it's illegal and it's very very hard of new HTC phones.
I'm software programmor and I programm in eVC for Windows Mobile.
I would like develop a tools about IMEI and Windows Mobile Device.
I would like to know if anyone know how Windows Mobile retrieve the IMEI ?
I know that the IMEI number is stored in OTP memory ( One Time programmable memory), but where is located this OTP ?
In the mainboard ? Or directly in the cellular modem ?
So i think that the GSM driver allow to seek the IMEI ?
It's right or no ?
Thanks a lot,
regards,
Nixeus
The IMEI can be read from registry: HKLM\Drivers\BuiltIn\RIL: IMEI
It is not safe (I believe it is only updated when the device is coming up after initial boot after upgrade) and can be changed - not impacting anything, e.g. *#06# will still deliver the correct IMEI.
Thanks my friend for your answer.
When i use the *#06#, do you know how the imei is reading ?
With an AT command and the cellular modem ?
Try it out - dial *#06# and see that you get. Then change the registry value and do the same - it will not read the registry. AT command I never tried, but I suspect it will also not read the registry.
Afaik, the IMEI is stored in encrypted format in some permanent part of the device memory. It should be accessible through some API calls to the RIL. As I am no programmer I cannot help you further.
hard to think of a LEGAL reason to be doing this anyway, the only reasons i can think of are writing a fake one (illegal) or spoofing it across the network (illegal).
If you just need to know what the IMEI is in your software for some reason then the registry entry mentioned should do it for you surely
Nooot !
I need to expand my knowledge.
Use the lineGetGeneralInfo function.
can be used for licensing method...for example a developer wants each copy can only be run on 1 device,this can be used
For example man, but i would like better to be able to read this imei in low level
Or directly from the cellular modem..
I had an issue with the last OTA and had to install a factory image. I did this when I was abroad....
Ever since, any contact that isn't in the format +CountryCodeTelephoneNumber is not found with CallerID
i.e. I have loads of numbers that are in UK format e.g. 07792827263 and these don't show as a contact
Any ideas how to fix this?
hello
i have seen or read many article on how to change spc to 000000. i needed to download and tweak my phone but without changing my imei. it's as good as nothing.
Please which better way to edit my existing SPC number to 000000. i use MSL utility to know my SPC. but i am having problem changing it.
i also made use of CDMA but i was hanged on the Password (16 digit ) where my sprint number said ( check image below )
so how will i achieve this?
thanks
http://forum.xda-developers.com/showthread.php?t=2270191 should be what you are looking for...