Hi!
I just got this device instead of a Magician. On magician, I had an app, where I could set bass boost for headphones, adjust treble and control microphone AGC....
Is there something similar for the Wizard? Or any registry settings I could try?
Thanks!
Some of the WM6 chefs have been starting to add the SRS Wow HD into their roms - here is a link to the freeware version - hope this helps you out
http://www.freewareppc.com/multimedia/srswowhd.shtml
Have a good one
Hey, I got that app!!!
It just won't start, it says that "There is no WOW HD driver loaded. The control panel will now exit"
I will browse for a solution, but if someone has it I would appretiate a link or something
I have a G3 Wizard, TNT latest Touchflo ROM...
did you reset after the install ??
I had no problems on my G3 wizard
kwacko said:
Hey, I got that app!!!
It just won't start, it says that "There is no WOW HD driver loaded. The control panel will now exit"
I will browse for a solution, but if someone has it I would appretiate a link or something
I have a G3 Wizard, TNT latest Touchflo ROM...
Click to expand...
Click to collapse
I just installed TNT.19199 with Windows 6.1, and here's the registry fix for SRS WOW that's working on it:
http://forum.xda-developers.com/showpost.php?p=1912475&postcount=56
it came with the ROM like you said it's common these days...
Hmmm, right now Wizard isn't even booting after soft reset... Guess it was a good idea to keep the MAgician for a while
The registry fix works!
And the sound can really be set perfectly for my Sennheiser CX310!
Thanks 100x, bill and madmaso, for quick solutions! I was searching for sound settings before I posted, but came up with nothing on "bass, sound, ..."
This is the best community I've ever come across!
Now to see if I can connect to my wifi...
hi,
i have the vga version of htc home installed on my standard desktop but i'd like to have the extra tab enabled to allow me to use the htc audio manager. has anyone else used this ?
i see that the blackstone audio manager is available for download. i did install this but it didn't actually seem to do anything - has anyone had a better experience ?
cheers
Search the forum for "HTC Home Config" or something similar.
There is a program out there which lets you config the whole HTC Home Plugin....
I guess it is on the KAISER Forum ...
Greets !
Edit:
----------------------
Look here :
http://forum.xda-developers.com/showthread.php?t=375921
thanks for that. i was aware of the customiser but had assumed that it wouldn't work on the vga port of htc home and unfortunately, i was right. :-(
which leaves me with the blackstone audio manager.
anyone used it ?
hey guys what should I chose for disabling the 100db sound on the latest td tweak release
thanks
search for HD Tweak.... you can use it to disable the limitation and make other tweaks as well.
i can't find the disable option on it. should i use the first option 100db limitted
Hi!
Main problem with Windows mobile for me is that VoIP can't work with internal speaker.
Reading threats here I came to conclusion that it is the same problem as inability to record other side in phone conversation.
So, when I saw ICR (in call recorder), I saw a solution to that problem.
As I understood it is originally from HTC touch HD and it was successfully ported to HTC toch Pro and Diamond.
So I tried a few Pro and Diamond versions found on their forums. And, of course, every time I had to hard reset my device because of loss of phone dialer caused by different screen resolutions.
Only in one case I noticed some improvement in call recording, and I didn't manage to open ICR application at all.
Then I saw this two ROMs for Polaris:
http://forum.xda-developers.com/showthread.php?t=459826
http://forum.xda-developers.com/showthread.php?t=472351
They both have ICR implemented. In the first forum there was a cab posted. So I tried that cab.
I couldn't get "start record" in menu with or without established phone call so I used external recorder Vito audionotes touch.
I could record both sides of conversation but sound level was unequal. And I don't mean like two sides had different sound level (which they do because the other side was louder, like recording with bluetooth hands free, which is ok as long as I can hear both sides well), but complete sound level was changing.
VoIP worked different. I could hear a lot in internal speaker, but I had a feeling I hear the same from external speaker, just quietly. That's why I'm not sure from which speaker sound comes any more.
And ICR application just wouldn't start. When I press icon in programs nothing happens.
So, any solution for this problem is welcome.
If you have any idea how to make VoIP work on internal speaker or how to record both sides of conversation just answer to this threat.
It doesn't have to be a solution. Any idea may be good and maybe we can come to solution together.
You're also welcome to share any experience consdering this problem.
Thank you all in advance!
I have
HTC Touch Cruise
original WWE WM6.1 ROM
ROM version: 3.13.405.0 WWE
Radio version: 1.59.42.15
Protocol version:25.85.30.07W
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
wasabi55 said:
I use 3lit v too.
But I can't use ICR.
Could any one tell me how to use ICR?
Thank you
Click to expand...
Click to collapse
once you are in call you have to have the "start recording" foctional.
in Start -> Programs you can find the recorded files and options to where and in which format save the recorded files.
emrause said:
Hi...
I'm using the 3LIT3 V Rom and In Call Recording works fine and the sound level recorded from both side is exactly what I hear...
But with a the original ROM, on a Touch DUAL I had to Install the Opal Dialer before get it to work... in the Touch DUAL after the installation of the Dialer it works fine but my phone windows goes very slow!
I propose to use the 3LIT3 V Rom and if your not satisfied come back to your original WM6.1
Click to expand...
Click to collapse
I was told by the autor of 3LIT3 V Rom that you need Iolite dialer for incall recorder to work.
I tried with opal dialer and it didn't work.
I tried this ICR with C_Shekar WM1.60.21014aCS with opal dialer and olso tried on an Elfin with Onyx 4.2 ROM with opal dialer, it WORKS in both devices with no problem. Hope this is usefull for you.
when you say it work do you mean you have start recordin menu when conversaton starts or you can open ICR program and change some settings?
Having start record would be nice, but only that is not crucial to me. Can you post a link to opal canvas whit which this ICR works.
Can somebody post a link to Iolite dialer whit which this ICR should work.
Is there a way to delete original dialer. Because in case I install one of these and decide to use it permanently I would have three dialers installed (one original windows, one original touch cruise, and the one I use).
Did anybody try Voip (fring, skype, SIP ...) with working ICR installed? Which speaker does sound come from?
What options are there in this ICR program?
Thank you all no your answers!
kulen said:
What options are there in this ICR program?
Click to expand...
Click to collapse
Only two: where to write the recordings (memory or storage card), and in what format (wav or amr). Both wav and amr are 8 kHz 16-bit mono, so quality is rather poor.
Hi, i'm using m-amine 2 with opal dialer.
I installed in call recorder cab founded here http://forum.xda-developers.com/showthread.php?p=3277318&highlight=recorder#post3277318
Now i can see "start recording" under menu during the conversation, but if i tap it nothing happens.
When i open icr under programs, no calls was recorded and i can't change the options (no selectable menu appear).
Which is the correct way to make icr fully working?
I installed opal phone canvas and in call recorder. These are results.
-I can't open ICR in programs. When I press on icon nothing happens.
-When having acitve conversation I do have start record in menu. And I can record conversation. Conversation is saved in My Documents/recording.
The other side can be heard but quietly.
-When using VoIP (fring) sound comes from external speaker. If I enable earpiece sound comes from both speakers, but louder from internal.
- !!!And one big problem. Phone doesn't ring neither vibrate.
I couldn't find Iolite dialer cab so if anybody has it please can you post it or provide link?
Any idea how to make this work with original ROM?
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
@chavobravo
Thank you very much for explanation.
Can I just install new cprog.exe?
Can I add AKU 1.4 to original ROM or is it neccessary to find ROM already having that build.
Do you know does this somehow affect problem having VoIP only on external speaker?
Or do you maybe have any solution for that?
BTW I flashed your 3LIT3 VI FULL ROM to try ICR. And ROM is really good. It seems faster than original. Only I like cube more (at least until I get used to manilla) because of beeing able to call it from any program.
It seems the only difference between your ROM and my original ROM with your in call recorder.cab is that in your rom I can open in call recorder program and there is start record in menu. But recording with Vito audio notes and VoIP (Fring) seems to act the same way.
For those (like I) who had no luck with the above registry recipe, or otherwise found that the other side is recorded inaudibly, here's a very simple app (sources included) I wrote for myself.
It runs in background and records all incoming and outgoing calls thru the ICR, and should work with any bios/acu/dialer/etc provided that the ICR cab mentioned in this thread is installed. The app itself requires no installation, and uses the ICR settings for the recoring format and dir.
No warranties etc etc, the app may contain as many bugs as possibly may happen to be found in 200 lines of code, please correct them and use the code at your pleasure, you've got the sources anyway. Hopefully somebody will write something more user-friendly based on it.
is this can useing on the SE X1?
To chavonbravo:
chavonbravo said:
You don't need InCallRecorder to record conversations. Only requirements are having an OS build with AKU of 1.4 or higher, as the newer cprog.exe adds this option.
[HKEY_LOCAL_MACHINE\System\AudioRecording]
"Enabled"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
"EnableCallRecordMenuItem"=dword:00000001
"AllowInCallRecording"=dword:00000001
When in call, you'll see a Record/Stop Recording option in your Menu softkey. It'll save the recording to /My Documents/Notes as a .wav file, with the following naming convention: YY-MM-DD_HH-MM-SS.wav
Click to expand...
Click to collapse
Are these options suppossed to be in a Jade? After browsing with Regedit, I just can't find them:
[HKEY_LOCAL_MACHINE\System\AudioRecording]
AudioRecording does not exist...
[HKEY_LOCAL_MACHINE\Software\Microsoft\Voice]
Voice does not exist...
Do I have to create them?
Thanks!
How to set icr to auto record any call ?
Tanks
I love incall recorder, I wish everyone would put it in their roms once this is worked out.
It is just too convient of a feature. Some of us have to do work on the cell phones, and it is just to dang convient to hit this and keep going.
I am wanting to upgrade to 6.5, but i want this feature. And just looking at 6.5 now. Wil this work in 6.5? Can i use the link above to get the cab, and then do i need a specific dialer for it?
Default InCall Recorder and 2-Way Record Patch
See this Link
And for the cab file the correct link is here
Dear all,
Is somoene knows how to increase quality audio of bluetooth headset directly from HD2 setting ?
I would like to know whitch registry's key allows to control, for example, the value of the bitpool whithout using any tweak tools.
Thx u for urs anwser,
ironlg said:
Dear all,
Is somoene knows how to increase quality audio of bluetooth headset directly from HD2 setting ?
I would like to know whitch registry's key allows to control, for example, the value of the bitpool whithout using any tweak tools.
Thx u for urs anwser,
Click to expand...
Click to collapse
Do you consider registry editor as a tweak tool?
Registry tools
vponomarev said:
Do you consider registry editor as a tweak tool?
Click to expand...
Click to collapse
Obviously not !!! I spoke tweaks like hd tweak or tf3 config, etc...
ironlg said:
Obviously not !!! I spoke tweaks like hd tweak or tf3 config, etc...
Click to expand...
Click to collapse
Any specific reason why you are opposing such tools? Think of them as sophisticated registry editors.