Related
Hi!
I really need help right now. This is second time my TyTN goes wild this way.
I can start machine allright and I can put PIN-code in but little bit after TyTN hangs totally. It does not respond to anything.
Even hard reset is difficult to do because you have to be so quick to push buttons before systems freezes.
There is no extreme programs or any changes made after last hard reset.
1. Can I do something now on the road?
2. What have I done wrong that it goes wild like this?
Please help ASAP if there is something to do now without HR.
I dont think the freeze can stop the hard reset ... You should be able to HR even when your TyTN is frozen till the ice ages ...
This is not the....
This is not the main issue. I can Hard Reset... but what went wron in the first place? And twice in one week.
Few decent program installations and using ActiveSync in two machines... I think that is the reason somehow... But how to prevent this happening constantly.
Most likely, one of your programs is screwing it up .. You need to figure out which one it is ... Setup one by one manually and see what happens ..
Also, try installing SPB Pocket Plus .. that has a manual safe startup mode .. see if you are able to start up your TyTN in the safe mode .. instead of doing a hard reset everytime ..
_mike_ said:
Hi!
I really need help right now. This is second time my TyTN goes wild this way.
I can start machine allright and I can put PIN-code in but little bit after TyTN hangs totally. It does not respond to anything.
Even hard reset is difficult to do because you have to be so quick to push buttons before systems freezes.
There is no extreme programs or any changes made after last hard reset.
1. Can I do something now on the road?
2. What have I done wrong that it goes wild like this?
Please help ASAP if there is something to do now without HR.
Click to expand...
Click to collapse
Just another thing to check along with suggestions above. Do you use a storage card. If so does it still hang with the card out. And secondly is there a decent amount of on board memory free.?
Mike
gravejoker said:
Most likely, one of your programs is screwing it up .. You need to figure out which one it is ... Setup one by one manually and see what happens ..
Also, try installing SPB Pocket Plus .. that has a manual safe startup mode .. see if you are able to start up your TyTN in the safe mode .. instead of doing a hard reset everytime ..
Click to expand...
Click to collapse
Had this happen on a Prophet it turns out it was one of the 3rd party software apps installed, the author updated it and no more issues.
I would bet the same thing is happening to you on the TyTn
yer i agree with mark i had same prob with my htc tytn turn out to be a 3rd party bluesnafing tool
What program that...
...might be?
Nothing starts on startup. I mean nothing special that my friend does not have. And he has no problems at all.
My guess still is that problem is ActiveSync. Because in freeze I can see part of ActiveSync window. And ActiveSync starts automatic...
Is there way to prevent ActuveSync on startup?
Thank you for your replys.
_mike_ said:
...might be?
Nothing starts on startup. I mean nothing special that my friend does not have. And he has no problems at all.
My guess still is that problem is ActiveSync. Because in freeze I can see part of ActiveSync window. And ActiveSync starts automatic...
Is there way to prevent ActuveSync on startup?
Thank you for your replys.
Click to expand...
Click to collapse
_mike_ I wouldn't be that dismissive of that advice. Usually, just where you think your sure you have everything covered in a particular area so theres no need to check, thats usually where your problem is.
The fact is that you and your friend have two different phones. Are the model numbers, lot numbers identical? Did you both in stall the exact same software with the exact same version numbers?
I'm guessing that you missed something there.
You need to be patient and thorough when figuring our these issues.
The best advice to find the answer to your problem has already been given.
Start with a base WM5 build and your ext ROM software. Remove your memory card.
Spend at least a day or two in base config. This will certainly tell you if its the phone or the software.
If your phone stays good, add one of your programs to the phone and wait another day.
repeat this until you find out what's causing the issue.
It's not quick or fast, but it's effective.
Good Luck!
l3G3ND said:
_mike_ I wouldn't be that dismissive of that advice. Usually, just where you think your sure you have everything covered in a particular area so theres no need to check, thats usually where your problem is.
....
It's not quick or fast, but it's effective.
Good Luck!
Click to expand...
Click to collapse
I think you are right. I'll do that. Thank you.
_mike_ said:
I think you are right. I'll do that. Thank you.
Click to expand...
Click to collapse
Let us know how you make out.
So what happened with this issue?
Mine has started doing this right after I installed pRSSreader and subscribed to BBc news feed
I took out storage card, soft reset and was quick enough to disable the today screen plugin for the offending app and then uninstall now everything's okay.
Maybe problem was caused by installing pRSSreader to the storage card confused:
Quad said:
So what happened with this issue?
Mine has started doing this right after I installed pRSSreader and subscribed to BBc news feed
I took out storage card, soft reset and was quick enough to disable the today screen plugin for the offending app and then uninstall now everything's okay.
Maybe problem was caused by installing pRSSreader to the storage card confused:
Click to expand...
Click to collapse
There was an issue with pRSSreader 1.3.2 I believe. It happened to me. I was able to disable the today plugin and recover, but it took a few tries. It's supposed to be fixed in the latest version.
Freeze TYTN
I had the same problem after installing Nots Push mail 3 party software.
Each SR make my TYTN freeze.
I have used Memmaid in order to remove it from the startup program
It has solved the problem
Mine hung after installing and uninstalling psShutXp. After uninstalling, I kept getting a notification error message whenever I turned it on concerning psShutXp. Then, it just locked up for good. No amount of soft resets, powering off/on helped. After a hard reset and reinstall of my favorite apps, back to working fine.
I do occassionally lock my phone by accident and I get a little freaked out the next time I use it because nothing works. Then, I realize what I did and that I'm a moron and everything's good again.
URPREY said:
There was an issue with pRSSreader 1.3.2 I believe. It happened to me. I was able to disable the today plugin and recover, but it took a few tries. It's supposed to be fixed in the latest version.
Click to expand...
Click to collapse
Just checked and that was the version I installed.
edit - according to their website 1.3.2 is the lates version
Hi,
I now have the same problem. I have only a view programs installed. Each softreset hangs at the windows mobile screen.
As I don't like a hard reset everytime, my workaround is to enter the bootloader and do a softreset from there...
Is it cleared in between, what is causing the hangs?
good night
dsp
Im getting a similiar problem with mine after not having added ANY new software recently. Mine hangs at the HTC screen, and no matter whether there is:
A) sim card and microSD card
B) microSD card only
C) sim card only
D) neither
in the machine, it still just hangs at the HTC screen on startup (regardless of whether its a soft or hard reset), and doesnt even make the startup tone, or play the animation, all it shows are a few digits and such in red at the beginning. PLEASE HELP!
Mine has it too
I know its a year later, but has anyone found an answer for the Freezing / not booting / not starting of the phone?
One reason is if you have a BS rom installed. You need to install a stock NBS rom (make sure radio is stripped out or you will have to reflash yours) the reflash your BS rom. Make sure you back-up your contacts and messages first.
Cheers...
I received my new P3600 last night and played around with it a little. I installed quite a few apps on to the storage card.
Now, what happens is that when I soft reset the device, it keeps on freezing at the green page saying (Windows Mobile - Direct Push Technology). last night I have seen the little spinning thing, now I dont even see this anymore.
Does anyone have the same problem? I am about to return to the device to the seller but want to make sure that really is a device problem rather then anything else.
Any experience with this?
take the manual or use the search for hard reset
tom0_1 said:
take the manual or use the search for hard reset
Click to expand...
Click to collapse
well, I keep resetting and eventually the device does start up (out of 10 resets, it works 3 times).
I am wondering though if i should return this one asap. I have had a few devices over the years but never seen a problem like this.
Is resetting a known problem for P3600's?
The error was not the device but one of the applications, I installed.
Glad you're sorted!
Which app was it- as a warning for other users to avoid?
Craic Dub said:
The error was not the device but one of the applications, I installed.
Click to expand...
Click to collapse
What was it?
Craic Dub said:
well, I keep resetting and eventually the device does start up (out of 10 resets, it works 3 times).
I am wondering though if i should return this one asap. I have had a few devices over the years but never seen a problem like this.
Is resetting a known problem for P3600's?
Click to expand...
Click to collapse
Mine has just done it now. Apparently it is usually an application on the device that is causing problems. I would guess something along the lines of a today plug in or similar.
Trinity Rox
I've had my trinity now for about 2 months.
I just did a hard reset using the clear storage option on a WM6 rom I installed. I ran the "miniSD HC v3.1.zip" fix but my 512 card just vanished on boot up. Came back and saw the card, No problems. A word of warning before you start toying with your new Phone. put "PPCPimBackup" on your storage card and backup all your contacts etc. This app is a life saver.
Hello,
I have the same problem.
What to do?
just boght the p3600 and after using it 2 days i cant restart it.
its stuck whene the screen shows Windows mobile detect push technology.
what to do?
i have WM 5
Like the title says. It doesn't happen all the time but happens alot. When I slide my keyboard in the phine turns off 60% of the time. Also I noticed when I bumped the phone on my knee at the bottom (Don't asked how I managed to do that ) it just turn off instantly.
Anybody else with this problem? If you don't have this problem let me know 2 please. Maybe its just my device! Thnx.
No my phone does this too; but not as much as yours. It also seemed to happen more when opening the keyboard. I noticed however if I don't open the keyboard quickly then it doesn't seem to do it as much. What I mean is if you push the keyboard open and it pops hard then the phone will shut down.
I think it has something to do with the battery. I have tried putting paper in the battery compartment in hopes that it will apply more pressure to the battery keeping it from sliding. This seemed to help a little but not very much. Best solution I found was to not open it so forcefully. I havn't had it turn off in a couple of months.
A friend of me has the same phone. I tried it with his phone and he doesn't have the problem. He never had it he said. So I called the HTC repair service to send it to them under garuanty and it sounded like they knew the problem. It shouldn't do that. and like you said, I tought it was the battery too but when i remove the battery case and try to move the battery the phone stays on, so I don't think thats the problem but something inside the phone. Maybe some bad contacts. Anyway, they come and pick it up thusday. Maybe I'll get a new one or they fix this one.
I have the same problem
Ocassionally I suppose as I haven't observed carefully, when I close the keyboard the phones powers off. Not sure what the problem is, haven't really read any thread on this kind of an issue. Does anybody have a solution without sending it back to the support center.
I have the same problem...it seems that there is somewhere a bad contact, I do not believe its a "loose" battery. Anyway, I will tell the repair shop as now also my touch screen does not respond anymore...
I had an Qtek 9000 for almost 2 years, never had any problems with it!
NOT very impressed with this thing...
Ciao
Eeehm, I called the repair center and they were about to come and pick it up. so i did a hard reset to delete all my stuff.... and now it doesnt power off anymore. Wich is really strange cause it looked like a hardware problem cause when i bumped the phone it also turned off.
Jewcookie - My phone also resets when I close it too forcefully or give it a good bump. After your hard reset did you re-install your prior software? If so, did the problem persist or did it disappear?
Choptank
I've been having a similar problem with my HTC branded Herald. (winmob 6)
The phone seems to behave normally until I open and close the keyboard.
A few minutes later, when I push the power button to exit sleep mode, nothing happens. I have to soft reset in order to get the phone operating again. During the time it is locked up, the phone doesn't ring and no calls show up as notifications. The fellow I spoke with today at HTC support said he hadn't heard of this happening before. He recommended a hard reset. Hoping to try a few other things first. Has anyone else with this problem had any luck resolving it?
Thanks C.T.
Still trapped in Sleep Mode!
Just a follow up to my previous post, it now seems that the phone locks in sleep mode after I have accessed files on the memory card. Two days ago I moved all Today plugin programs to device memory (except Pocket Weather, too large!) in order to see if that was the problem. Phone worked fine for two days, no lock-ups. Yesterday the only thing I did differently was access an Excel document from the micro SD card. I then put the pnone in sleep mode. About 10 minutes later when I needed to make a call, it wouldn't come out of sleep mode without a soft reset. Also I had scanned and re-formatted the memorycard, no apparent problems.
Anybody else dealing with a similar problem?
2 Jewcookie - met welk reperatiecentrum heb jij contact opgenomen dat ze hem komen ophalen? want mij zeiden ze dat ik hem moest opsturen, maar dat kost me teveel tijd.
grzz Clint
i had the same problem one time with it turning off when i closed the keyboard. it happened when i was playing with the battery. I just took the battery out and re-seated it securely and it fixed it.
Do you have a factory battery or an aftermarket one? if it is an aftermarket one then it might not fit as perfect as the regular one. I got spare thats a little bigger than stock. Might help in your case.
I have a stock battery. Not looking forward to doing it, though it looks like I will do a hard reset and then use my Herald completely stock for a few days and see if the "stuck in sleep mode" problem goes away. Then I'll load my third party software one by one and see if I can isolate the app. that is causing the problem. I'll post the result. May take a few days.
Keyboard issues
choptank said:
I have a stock battery. Not looking forward to doing it, though it looks like I will do a hard reset and then use my Herald completely stock for a few days and see if the "stuck in sleep mode" problem goes away. Then I'll load my third party software one by one and see if I can isolate the app. that is causing the problem. I'll post the result. May take a few days.
Click to expand...
Click to collapse
Choptank- did you find out if it was software or hardware issue?? Mine just started happening and mine is stock!!!
As it turns out, the cause of my lock up problem turned out to be unrelated to opening and closing the keyboard. The actual problem was a Today screen plugin. When I disabled the plugin, the problem went away. It took me quite a while to discover this as the program (Pocket Weather) is one of my favorites and I really didn't want to disable the plugin. I'm hoping that maybe a future version of the program will work better on my device.
CT
Guys, I too was having this problem. But, in my case it came out to be a software problem. To summarize, these were the apps that can probably do that..
1) sbsh pocketbreeze
2) sbsh ilauncher
3) spb diary
4) spb p+(frequency was too low though)
It seems as if these apps demand more juice sometimes which causes device to reboot. I have been a huge supporter of the sbsh products but I'm not using them anymore. Currently I dont use any of the aforementioned apps and have not encountered a single unwanted reboot so far.
Troubles....
kdskamal said:
Guys, I too was having this problem. But, in my case it came out to be a software problem. To summarize, these were the apps that can probably do that..
1) sbsh pocketbreeze
2) sbsh ilauncher
3) spb diary
4) spb p+(frequency was too low though)
It seems as if these apps demand more juice sometimes which causes device to reboot. I have been a huge supporter of the sbsh products but I'm not using them anymore. Currently I dont use any of the aforementioned apps and have not encountered a single unwanted reboot so far.
Click to expand...
Click to collapse
Here's what I have Kdskamal:
WM5 (Hera 100, unlocked from factory w/t mobile)
OMAP console/ckr
Opera Mini (deleted recently) and now pages lock up
vTap Videos
Ygo! Mobile
One Note Mobile
As stated above, I deleted opera mini: since the deletion, I've had these problems and I have soft reseted twice. Should I hard reset
taz357 said:
Here's what I have Kdskamal:
WM5 (Hera 100, unlocked from factory w/t mobile)
OMAP console/ckr
Opera Mini (deleted recently) and now pages lock up
vTap Videos
Ygo! Mobile
One Note Mobile
As stated above, I deleted opera mini: since the deletion, I've had these problems and I have soft reseted twice. Should I hard reset
Click to expand...
Click to collapse
Well, you should definately consider doing a hard reset and install some nice clean WM6.1 rom. try the ones from aserg(the lite ones).
WM6.1
kdskamal said:
Well, you should definately consider doing a hard reset and install some nice clean WM6.1 rom. try the ones from aserg(the lite ones).
Click to expand...
Click to collapse
kdskamal,
WM6.1 now is this a personal (cooked) upgrade?? im leery of WM6 because of its numerous problems when it first came out.
Seems to be the Battery
I have seven batteries for my alltel ppc6800 (titan, mogul, etc.). My phone completely loses powers when I use the orig. battery that came with the device and one other battery I bought on ebay sometimes when I slide out or slide in the keyboard letting the spring loaded feature do its job. It seems not to happen when I guide it open and close with my hand. One trick that did seem to work was taking an eraser and cleaning the leads on the battery and the phone, however it may work well for another couple of weeks but has the same problem sooner or later. Still, I never charge my phone and I am an insomniac and am always up using my phone so I need the batteries.
hi all, i bought a tytn at ebay, but
the after a short time of using the bottom buttons, they stop working.
touch screen and buttons on the side are stÃll working, but the bottom buttons are dead.
sometimes after turning off amd turning on they are working for a short time again. a restart also helps to make them work.
but its not funny to restart every 10 minutes.....
it is an e-plus tytn from germany with wm5.
do u guys think that it is a hardware or a software error?
I seem to have this problem on and off myself and think it's related to either the rom on the phone or the radio rom but am not sure which. It seems sometimes I have this problem and it seems to come and go depending on what combination of rom/radio rom I have installed. If I was smart I'd find a combination that works well for me and stick to it but I always like to play with things so typically every day or two I'm reseting
yeah, i have the same problem.... i hate to restart the phone every now and then, but I need to figure this out sometime soon, or I'm gonna upgrade to WM6 to see if that solves my problem. lol...
did anybody else have an idea to solve the problem?
crutav said:
did anybody else have an idea to solve the problem?
Click to expand...
Click to collapse
http://cnn.cn/shop/8525tytn-flex-cable-p-1732.html
I opened up my tytn, to find out the problem, and I found a small crack in the flexcable mentioned above.
Before it was never opened nor did anything strange happen with it, so this seems to be yet an other production problem/fault..
More and more people seem to have the same problem, time to presure htc for a repair....
Ok for me this is too late, but all for the good cause.. will just order myself a new cable and try to swap it..
Any ideas where to get the flex cable these days? Not finding it at the link above and internet searches aren't panning out either.
FYI:
Just got back my HTC TyTN from service under warranty, sent for exactly the same problem.
The technician I spoke to directly said that maybe about 90% of the lower keys malfunctions are caused by the lower keyboard board behaving erratically and it is a well-known hardware problem.
A board replacement solved it, my TyTN is working perfectly again, they also replaced the stylus holding rubber (which was broken already from the early days) and, surprise, they upgraded my WM5 device (I had to revert everything to the initial versions before handing it to them) to the latest official HTC WM6 Rom. Even bigger surprise, although what I gave them was a WWE device, when I got it back they had upgraded it to the localized (official Greek) version. Life is good.
Anyways, seems the only real solution to this is a visit to the repair store, hopefully under warranty and reverted back to the original settings...
Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?
thehelios said:
Starting today, my touchscreen just doesn't register anything. It's not cracked or damaged at all. It just stopped responding. I can still use my dpad but my phone is extremely limited at this point.
I'm currently running Myn's Warm Eclair: http://forum.xda-developers.com/showthread.php?t=691174
I really don't want to format my phone to figure out if it's a software problem but does anyone know if this is just a problem with this android build or with android on our phone in general?
Click to expand...
Click to collapse
It has been a problem for me with some builds. I suggest you to make a backup with some app like Titanium Backup and reinstall Android. Try with different kernels if you still have the problem. Don't worry for the moment!
I have had this problem a few times. I still can't quite figure out exactly what makes it happen but it seems to be something to do with sleep. My solution is to restart and go into NAND then do a backup apps and then quit. something gets woken up in the screen and it starts to work again. No idea why, it just does. Good luck.
So I guess my touchscreen is just dead. I reinstalled android, reflashed my phone for the froyo rom, and I even flashed a windows rom onto my phone but nothing. I even opened my phone to see if it was connected properly to the mobo but all seems right.
On the windows rom, when it does the screen calibration, I can mash the crap out of my screen and I guess it picks up some sort of signal every now and then because the crosshair moved.
If anyone knows anything about this, please reply. I don't really want this to be the end of my vogue. It's been a good 3 years so far!
http://cgi.ebay.com/Touch-Screen-Di...749473?pt=PDA_Accessories&hash=item439b537fa1
You may just need a new Digitizer.
Can get them pretty cheap on e-bay - just have to wait since coming international mail.
I am having similar problems. Usually when the phone goes to sleep and I wake it up the touch screen is unresponsive. Only way to get touch to respond is to reboot.
I have tried it on my vogue on both the fresh froyo and experimental fat free froyo using both the 10-9 and 9-29 kernel on nand. I have also used nbh editor to change the panel types (vogue uses auto detect so I changed it to Polaris) and still the same problem. I thought perhaps there was a problem with a program but I have no programs installed right now and the problem still persists.
Does anyone have any suggestions? My phone was working fine up to a few weeks ago and I would hate to be forced to use windows again. I have reinstalled windows and it works fine there so I don't think it is hardware related. It seems something happens when it goes to sleep.
Well there might be a driver issue. Try going back to the stock rom for your device and see if the touchscreen works, if it doesn't work, then it's probably broken. Try opening the vogue and disconnecting and reconnecting and then turning your device back on and test it again. if it still doesn't work, then yea you will have to get a new digitizer.
You can also try using other releases/roms with different kernels.
good luck!! and may your vogue live on!!
Thanks, I've installed a windows rom and the touchscreen has no issue there so it leads me to believe it is not the digitizer, especially because it seems to break when it goes to sleep.
I will try even older kernels and perhaps a donut build to see if the problem still exists.
Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.
n2rjt said:
Try to figure out when things broke for you by trying the kernels that have been released over the past month. Maybe we can isolate the change that broke things for you. Maybe not, but it's worth a try.
Click to expand...
Click to collapse
Hi! I had this problem, that was the reason why I put back WM. I experienced it using .32. I think it was from 1-Oct-2010 approximately when it started to fail.
IT'S A CONSPIRACY!!!! Last week my screen broke as well. I was running "not so super froyo" and it would work for a second then just be completely unresponsive... needless to say I now have a droid x *fap**fap*