hi guys.
my x1 front panel doesnt not work anymore.that means all my buttons are dead now.so i have to send my phone to service.I NEED YOUR HELP IN THIS CASE..please help me......
i restored my orginal os,splash,radio from X1i_GENERIC_UK_CDF1215-1832_R1AA017.but i am not sure all the spl are same version.i downloaded ruusigned_072stockspl.zip from olinex Hard-SPL for Xperia X1 - Released! thread.and i restored spl with this spl.because my phone was hardspl.....
now is my phone ready to send service?another word X1i_GENERIC_UK_CDF1215-1832_R1AA017 spl is same as olinex original stock one?because i couldn't restore orginal spl from the uk generic rom.i extracted spl with NBHUtil.exe from original rom but when i tried to flash with this spl i coudnt do it.sorry for my bad explanation.
also my phone does not get bootloader mode anymore.i Press and hold first the volume down button on the phone and then the phone power button.but nothing is happening.so i cant check my spl anymore.i am very stuck.how could i turn my phone to original X1i_GENERIC_UK_CDF1215-1832_R1AA017....
please help.thanks a billion in advance.....
I do not know if my answer is still useful, but:
With the original ROM, you restore the ROM (why do you mention spl while talking about standard ROM?!)
Then, you use the stock SPL provided in the thread (http://forum.xda-developers.com/showthread.php?t=431218) to overwrite Olinex Hard SPL with original SPL.
That's all, hoper you'll get yous SEX1 back soon!
Related
while trying some roms i stupidly removed hard spl
and now i cant install or flash any rom some local repair shops advised me to change motherboard do i realy have to???
mdrcute said:
while trying some roms i stupidly removed hard spl
and now i cant install or flash any rom some local repair shops advised me to change motherboard do i realy have to???
Click to expand...
Click to collapse
did you try to reinstall hard spl again?
check this out http://forum.xda-developers.com/showthread.php?t=381600
yes i tried it didnt work
i tried to hard reset too
the installing of the original rom is the only one can be started and will stop in the middle to give me an error
Hhmmmm
mdrcute said:
yes i tried it didnt work
i tried to hard reset too
the installing of the original rom is the only one can be started and will stop in the middle to give me an error
Click to expand...
Click to collapse
how did you uninstall hard spl in first place...
by putting back original spl
What error you get when you hard spl?
it stays on 0% and never move then it asks me to make a recover
1. Unlock your polaris
2. Than Hard-spl your device
PS: Only use the hard spl in the link provided. Disable your antivirus before procedure.
this might work.
thanks at first
but the first link cant be downloaded
and i think it is just an earlier version of hard spl 2.0
so i think it wont be usefull
From what I've read on a while ago on XDA, if your rom flash progress hangs in the middle of the process, it may be because of the fact that your current radio is too new for your 'old', original rom. You should try to flash an earlier radio before you flash the complete original (6.0?) rom.
And if you get it flash half of your rom, you probably didn't remove HardSPL, but correct me if I'm wrong, I'm not that familiar with it.
pola100
spl-1.25.0000
cpld-2
this is on my boot loader or whatever you call it
ok here it is what i need:
I just need to know the how to down grade my radio if i have no windows working in my pda and no hard spl
could any one help me???
mdrcute said:
pola100
spl-1.25.0000
cpld-2
this is on my boot loader or whatever you call it
ok here it is what i need:
I just need to know the how to down grade my radio if i have no windows working in my pda and no hard spl
could any one help me???
Click to expand...
Click to collapse
As I recall, the figures above indicate that you do have the original SPL. You should try to flash an original rom (if you don't have one, i have a dutch one here (wm6.0). If that doesn't work you should try to flash hardspl (hold the camera button while softresetting to enter bootloader) ( http://forum.xda-developers.com/showthread.php?t=351964 ) and then try to flash a newer rom.
Where are you from?
Btw. I forgot to tell you that you need to flash an old radio too if you're going to flash the original rom. (if you don't have one already).
And when you have hardspl on your device, it'd be wise to flash a rom which include a radio.
I'll be away for a couple of hours, so I've put the original (dutch WM6.0) rom (incl. the original spl, but I think (dont know for sure) you need hardspl2.0 just to flash anything.) online here, let me know if your figured it out.
well thank you for all the help
but i am sadly informing it didnt work if the problem is the radio the i just need to flash another one .
it is just i cant or i dont know the right method to flash the necessary radio
would any one please tell how to flash radio from the boot loader when i dont have hard spl
Maybe a stupid question, but why can't you flash hardspl2? And do you have an unlocked device? You don't live in the Netherlands by any chance right?
why I can't flash hard spl 2 ?
actually I don't know
maybe because I am stuck in the boot loader
and sadly I am living in Saudi Arabia so we don't have much programmers around here nor people who have PDA
that's why I can't find someone to help
Can you describe exactly what you do step by step on your pc and pda and how your hardware is connected?
update: and tell me what messages are on your screen and if you get any errors
well first i connect usb so the pda directly starts boot loader (the screen with three colours)
after that whatever (ROMUpdateUtility.exe) i use the installing stops to give me this messege:
the rom update utility has encountered communication errors during the update process . the program will guide you step by step to recover from the errors so you can continue with the update.
this happens with every rom i tried including the har spl exept for the original rom it advance untill 38% then stops and give me the same messege.
if i try the (step by step ) process it ends up the same way .
anyway what i understand that my problem will end once i put (hard spl)
or if flashed another radio all i need to know is how to do either of them from the boot loader.
i have been so needy but sorry for that i am just sad about my pda i like it alot
I dont think it changes anything, but you do keep the camera button pressed while softresetting your device to get into the bootloader?
Usually your device only gets to the bootloader when you do that, but i can imagine that when your rom update failed and the device cannot boot a rom, it stays in the bootloader, but not in flash mode? Worth a try..
Tell me what appear in your PDA screen during boot. I want to know the information on the first screen like below:
R:
G:
D:
These information usually appear on the right bottom corner or your screen when you boot your device.
Since then voila I install a rom for the first time I have a bug here is a picture to help you understand
It is an image that I have requests in the forum but am in all its images
More information please!
We need more information!
Are you using SPL or USPL?
What ROM did you flash?
Did you perform a hard reset after flashing the ROM?
If you're not sure about the above then read this for SPL:
http://forum.xda-developers.com/showthread.php?t=431217
This for USPL:
http://forum.xda-developers.com/showthread.php?t=462347
And this is an all round overview:
http://forum.xda-developers.com/showthread.php?t=505377
G
Edit: And this post makes me a senior member - woohoo!
Here is how I do I install rom always full of the same problem
Olinex I install 1.56 and then the official 1.56 rom 2009
The picture you supply isn't from the official 1.56 HTC ROM because it is running Windows mobile 6.5 (I can tell from the user interface). The official ROM uses Windows Mobile 6.1.
I think you need to make sure that you flashed the correct ROM and then flash the device again. After doing this make sure you hard reset afterwards at least once, preferably twice by holding down both volume buttons while powering the device on.
Also unless you have a CID locked phone that is branded eg. Orange, you shouldn't have to use Olinex HSPL and can download the official ROM from here:
http://www.htc.com/uk/SupportDownload.aspx?p_id=179&cat=2&dl_id=533
In any case you should confirm which SPL you have by holding down the lower volume button while booting (it will tell you either SPL or HSPL along with version number).
Let us know how you get on...
G
HSPL 156 OliNex and htc is a factory not orange or other
Okay, it sounds like you have successfully installed HSPL, but now you need to try flashing the ROM again (it appears to be the ROM that is causing the graphic corruption in your picture).
Make sure you perform two hard resets after flashing and hopefully this should solve your problem...
Cheers,
G
P.S. Make sure you back everything up prior to re-flashing as you will lose everything in phone memory (SD card should not be affected, but my advise would be to remove it anyway until you have re-flashed).
I recently bought a Tmobile Wing on ebay and it has been hard spl'ed as I can see the SPL as 4.70 Yang in the bootloader mode.
Is there any way to remove the hard spl and just have the original spl on their?
I saw this thread where it has instructions:
http://forum.xda-developers.com/showthread.php?t=364543
but in this thread it says to also reflash it with the original rom after removing the hard spl. It looks like the phone is running a standard tmobile rom and I do not want to reflash the rom, just remove the hard spl. Thanks.
Hi! i open this Thread beacause i search for answers and i don't find them...
First thing, i will say what i done and where am i with Ruu.
I hard spl with 1.11 from PDA all soft working after then i flash it with 5 software and all have the same problem. Windows mobile image apears but remains in it... can't go forward.
Second i download RUU_Pharos_HTC_WWE-ME_1.11.456.1_4.1.13.59_03.15.90_BLUE_Ship and others original firmwares, but now it remains on Smart Mobility image and say
ONBL 2.05.0000
SPL 2.05.0000
GSM 03.37.90
OS 2.5.0.0
and i can't flash with any soft upgrade, because it work's 2% and restart, and RUU tool say check your update tool...Hard spl don't work anymore
just remains at this step..nothing happed...
Can i revive my Pharos? or i can go to trash and drop him there? (
Sorry for my english!
same problem.
please help
Hi,
You installed a ROM with a packaged SPL 2.x (2.05.0000 in your case), but AFAIK there isn't any patch for SPL versions higher than 1.11, so you can't flash anymore with any ROM. You're locked with your last ROM. You can try to ask for a patch, but i think that's not easy to obten a valid answer. You can also try to make this patch, but... good luck
can i used other htc unit hardspl?
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Flash your Official ROM
rockerboom said:
Hi All,
I need your help in urgent!!!
My ELF GSM infor:
- DeviceID: ELF011000
- CID : DOPOD701
My ELF worked fine before I tried to upgrade its IPL from 1.11.0002 to 2.26.0002, then this problem occur. Because a WM 6.1 ROM requires to have IPL 2.27.0002 and SPL 2.28.0000 so I kept continue upgrade the IPL/SPL to 2.27.0002 and 2.28.0000.
I tried to flash my ELF, from bootloader mode, with these ROMs:
- RUU_Elf_DOPOD_chs_1.11.706.1B, this ROM I got from a China forum, it is my device original ROM
- RUU_Elf_DOPODASIA_WWE_1.11.707.1B_4.1.13.42_02.93.90_Ship.exe
- RUU_Elf_DOPODASIA_WWE_1.17.707.2B_4.1.13.46_02.97.90_BLUE_Ship.exe
- RUU_Elf_HTC_Asia_HK_WWE_1.15.721.3B_4.1.13.46_02.97.90_BLUE_Ship.exe
- ESSential_4_5
- Onyx_jr_4_4_2_Light
They are all 100% successfull but the IPL/SPL unchanged (2.27.0002 and 2.28.0000) and the device still loop at smart mobility, can not jump into OS.
I did try to use unbricker ROM and goldcard (with original ROM or unbricker ROM inside) but the ELF still stuck at smart mobility...
Please give me your advices, what should I do (except buying a new phone)?
Thanks for your time!
Click to expand...
Click to collapse
First try to flash your official ROM and then try to flash ipl/spl again follow step by step. After that try to flash customize ROM again. Hope you will success.
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
rockerboom said:
Dear ELF341,
Thanks for your advice!
When I flash the original ROM, 100% successful, then my ELF loop at the China Mobile screen then reset... I don't have the IPL1.11.0002 and SPL 1.11.0000, the lowest I have is IPL1.17.0002 and SPL1.17.0000. I tried to flash back the 1.17 version, after 100% successful, enter bootloader, the IPL 2.27.0002 and SPL 2.28.0000 still remain!?
Please tell me how to do!
Thanks for your time!
Click to expand...
Click to collapse
After flash back to official ROM , enter bootloader and check ipl/spl first.
Normally, if you flash ipl/spl (not hard spl) when you flash back to the official ROM the ipl/spl will back to original. S/R - wait for boot to WM if OK then do H/R again. And flash ipl/spl again - enter bootloader and check ipl/spl again (changed or not) if OK after that I recommended you flash Onyx ROM. I used it for long time and no trouble.
Hope, it's can help you.
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
rockerboom said:
Dear ELF341,
Thanks for your reply!
After 100% successful loading the original ROM, my ELF restart and loop at the China Mobile screen... When I enter bootloader, the IPL/SPL still remain as IPL 2.27.0002 SPL 2.28.0000
I understand that when we flash the original ROM, the IPL/SPL will roll back to its original version, but mine is so strange?! Does this mean that:
- My ELF's flash ROM is fail or locked at the region for IPL/SPL so that whatever ROM I flash (these ROM contain ILP,SPL,OS,radio..) the IPL/SPL unchaged?
- The original ROM is actually not match to my ELF?? But I already flashed the other ship WWE ROM and also the unbricker ROM, they all loop at smart mobility...
Please help me!
Click to expand...
Click to collapse
How you flashed ROM ? By RUU (PC) or used microSD card. I recommened you to use RUU (PC) follow step by step. Sometime when I used microSD card to flashed ROM , it's successful but cannot boot, after that I flashed Official ROM by RUU and unlocked the phone again it's back to normal. And your official ROM, you must check with your operator or distributor because in different zone it's use diferent ROM.
Dear ELF341,
I only can flash via PC RUU, I don't succeed in SD card way:
- When I copy the *.nbh file into SD card, then enter bootloader, I just can see the checking SD card content string displayed very fast, then the tri color screen.
- When I create a goldcard and copy *nbh file into it, enter bootloader, the brick ask for 'upgrading SD image', I press power button for it to start download but it hang at 'downloading from SD' with a blank download status bar.
Actually I bought this ELF from a man on my local site, so I don't know where is the distributor...I used the mtty and usb monitor to check for my device infor, then search internet for my original ROM, I only can find in a China forum that match my deviceID/CID....
For my case, I really don't know why I can not change its IPL/SPL version? Please help me!!!
Thanks for your time!
well u hav to rename the nbh file to ELF0IMG for SD card flashing to work.