Hi fellow members of xda-developers. i plan to paint my housing because it has too many scratches. i already painted the front part but the middle where the query keyboard is not yet finish. i already disassembled the sliding part from 2 pieces. i was trying to figure it out from how to remove the qwerty keyboard out of itshosing so i can paint the whole middle part with worrying to paint the qwerty keyboard. by the way, i was talking about o2 xda IIs. It does have any screws at the back so i'm very confused. hope someone already done this. pls help. tiA!
the official service manual for blueangels covers disassembling the entire device, so i suppose, removing the hard keyboard is in there too, so here's the link:
http://www.4pda-service.ru/netcat_f.../BLUE ANGEL/HTC_Blue_Angel_Service_manual.pdf
@chef_tony
just what i needed. thanks a lot! more power to yoU!
@chronicels
Glad to see that your issue got resolved. From now on, please post your questions in the Questions and Answers thread rather than opening a new thread to ask questions. Also, make sure that you search the forum and the wiki as well. Most answers are readily available. Thanks.
dont forgot to see my job
you can see many work in progress here:
BTW post yours too...
here
http://forum.xda-developers.com/showthread.php?p=3355290#post3355290
Related
Guys,
I have searched but can't find any results - my keyboard is just naff, I've lost my full stop (due to the key getting trapped when opening/closing) and now my T button doesn't work unless I press it incredibly hard.
Anyone know how easy/hard it is to remove and perhaps check for dirt behind thats preventing my T button from workin?
Cheers, Ash
sorted
im japanese,
incidentally, this is in the hermes wiki
http://inuchanbt.blog54.fc2.com/blog-entry-100.html
Nice one, will have a go!!
Also see here, for other dismantling sites/guides and a dismantling video plus the service manual (inc pics) etc
http://michael-channon.spaces.live.com/PersonalSpace.aspx?_c02_owner=1
This will also be useful:
http://forum.xda-developers.com/showpost.php?p=1399157&postcount=16
Mike
Does anyone know where I can purchase a new keyboard for my Kaiser ?
NEVERMIND I FOUND IT!
BUT... I don't know how to install it if I buy it. Can anyone help ?
Does anyone know where I can find a tutorial of the Kaiser Keyboard Installation
Uh, may i know what you found?
I think he means he found the Kaiser keyboard.
And if you did can you please tell me where? a couple of buttons on my tilt is messed up so its good to have a backup .
you can go to htclcd.com and get the disasembly tutorials from there..after you take it apart..its pretty easy to replace the keyboard..just follow the instructions to take it apart
cnn.cn for parts and check the wiki for disassembly guide.
Watch out for cnn.cn though.. my brother ordered the black casing for his n82 which arrived very quickly. During installation he broke his LCD so he ordered one from cnn.cn. The next day a package arrived but it was torn open with no LCD in it. So he reported it to cnn.cn which asked him to report it to UPS which he did. UPS refunded cnn.cn the $60+ for the LCD and no cnn.cn is telling UPS that he never ordered an LCD from them.
So basicly UPS paid cnn.cn back for the lcd and now they won't send him one. He already reversed the transaction to them so he got his money back but they ripped off UPS and got $60+ for nothing...
is there a more current place to buy a keyboard?
the vendor listed does not show them on their web site. My 'v' key and 'b' key are sluggish as far as responsiveness.
the laziest way to change yer keyboard is to get a bluetooth one, lmao
kinetic2649 said:
NEVERMIND I FOUND IT!
BUT... I don't know how to install it if I buy it. Can anyone help ?
Click to expand...
Click to collapse
Where you found it?
Any chance one of you folks that replaced a keyboard would be willing to send me a single key? (The F key is missing on my keyboard.. I can still press the hole under it, but would be nice to put a key-top back in the gap)
PM me if anyone might be able to help. will donate to your beer fund.
I found it http://www.pocketpctechs.com/main~u...rs-htc+kaiser+parts+only~item~HTC-T2IKB01.htm
What about the Tilt keyboard? That one has the Kaiser special characters.
try a keyboard from www.gsm4world.com
Hi,
You don't want to buy this one from pocketpctechs. The inner keyboard alone would not fit. You need the outer keyboard. See an extended discussion of how to install keyboard from page 12 onwards in this thread:
http://forum.xda-developers.com/showthread.php?t=337102
(keyboard issues are handled from Page 12 onwards)
I purchased one of such whole keyboards from (http://www.gsm4world.us/shop/tytn-p4550-keyboard-flex-p-1433.html) and installed it myself, twice.
You can use the dismantling guide on the wikki here to guide you. There is also a service manual here - http://e5hopa.bay.livefilestore.com..._TILT_8925_KAISER SERVICE MANUAL.pdf?download - to help you dismantle the Kaiser.
Once you dismantle the Kaiser, you will know how to replace the keypad - infact removing the keypad is part of the process, hence you just insert and screw on the new one.
good luck - MN
-----------------------?
breakx said:
I found it http://www.pocketpctechs.com/main~unit~HTC_Kaiser-971~area~repairs-htc+kaiser+parts+only~item~HTC-T2IKB01.htm
Click to expand...
Click to collapse
Thank you man ...you really help me.
On http://www.gsm4world.us I can't register an acount, my country Romania in not listed ...I shall send an email ...
I have had no luck searching for this, nor any mention of it anywhere else.
How easy would it to be see a different keypad style depending on where the stylus is?
ie:
Stylus in: see phone pad
Stylus out: full qwerty
If anyone has a cab or a link I'd be very grateful. If there is any interest in this i might have a go at doing it if noone else has already.
sambo1981 said:
I have had no luck searching for this, nor any mention of it anywhere else.
How easy would it to be see a different keypad style depending on where the stylus is?
ie:
Stylus in: see phone pad
Stylus out: full qwerty
If anyone has a cab or a link I'd be very grateful. If there is any interest in this i might have a go at doing it if noone else has already.
Click to expand...
Click to collapse
This is what you're searching for:
http://www.nuerom.com/BlogEngine/page/nueSIPStylus.aspx
Brilliant, and thanks for holding back the flaming for me being a nub and failing at using google properly.
sambo1981 said:
Brilliant, and thanks for holding back the flaming for me being a nub and failing at using google properly.
Click to expand...
Click to collapse
No problem, but next time ask in Q&A
@Mods: Thread can be closed.
hi guys,
i just found out that our 4 hardwarekeys on our blackstone are just driver-made. that means our touchpad goes down to the keys.
this can easily be proved by using slide2unlock2: while sliding, go down to the keys and it is still possible to move the slider.
so why don't we tweak the driver for the buttons a bit to have e.g. 5 softkeys? we could move the home and back button a little bit aside.
i often missed the "startmenu"-key on my hd.
of course we don't get that printed on our device, but if you know where these buttons are, it could be very usefull.
so, what do you think? is it possible to realize?
unfortunately i'm not gifted with these programming skills, but i bet somebody around here can definitly do it!
greetings,
guro
no one interessted in this?
think of the buttons an HD2 has, i mean the same alignment! so in one row should be dial, home, windows, back, hang up buttons.
do you know which dll is the driver for the buttons?
thanks in advance!
guro said:
no one interessted in this?
think of the buttons an HD2 has, i mean the same alignment! so in one row should be dial, home, windows, back, hang up buttons.
do you know which dll is the driver for the buttons?
thanks in advance!
Click to expand...
Click to collapse
I remember someone doing this before or trying to get it developed. Not sure how it was left though. Most likely in the Development and hacking forum. I suggest to try searching there and/or post your query within that forum
would you mind moving my thread over to that forum?
i didn't find any thread while searching for that topic...
guro said:
would you mind moving my thread over to that forum?
i didn't find any thread while searching for that topic...
Click to expand...
Click to collapse
Problem is I cannot remember where I saw it. I would direct you there if I knew where it was. This is why I said for you to search. I'll have a quick look and see if I can find it. If I do I'll post link or combine threads
EDIT
Think I found original thread, but unfortunately it went no ware with no responses. Sorry mate
Hi There!
Does anyone have a step by step guide with lots of pictures for dismantling one? I have been quoted a huge amount for taking mine to peices to clean it after somehow a chocolate bar melted and some of it got in the hard keys.
Howzit, hope this helps u out..
Check --»Here«-- and --»Here«-- for detailed disassembling and assembling your Hd2..
Thanks muchly. I won't be doing it. I'll need to get a service agent to have a look I think. My keys are sticky after a chocolate bar melted over the hard keys, I thought it would be easy, but it doesn't look easy at all!