when i install it, it said it was unsuccessful. is there any trick to install it? i have the full version.
Don't bother about it. We all get this message It is completely installed. Go to Start --> Settings --> Voice Command and that's it.
Related
I bought a Jasjar today and tried to load Voice command, it stops after it loads (installs) it doesn't freeze the Jasjar it just sits at the final step of install, I have to reset it and then to find that its there and you can turn it on or when you reset it says "Voice Command is ready" then a screen pops up and reads "Unable to start Voice Command. Reinstall and try again".
I noted that when I am installing it a window pops up and reads "You have chosen to install voice command to "". Installation to Main Memory is recommended. Continue anyway" I can only press YES as if I press no it cancels the install. What is "". it should be main memory.
I have tried searching to have no luck, I did find a mention of a problem but no solution.
Any help would be awesome. Thanks.
Seal, have you tried to use the latest ROM from the Clubimate site. Looks like your ROM may be corrupted (which can happen)
I have the lastest from what I can tell, I only got the phone today and went and registered, the rom I have is: 1.13.53 WWE Rom date 23/9/05
And thanks for the help
I fully reinstalled the rom and tried again with Voice command install and still the same problem, installs but doesn't work.
Any help please
It works for me, even with the error message you describe. But you cannot see contacts, and it does slow down the universal a good deal. I've removed it and got a snappy universal
it just seems really strange being a microsft product, I had an xda 11 before with WM2005 and VC worked fine, everyone else seems to have it though, why does theres work and not on mine.
@Seal, sorry mate I am confusing Voice Command and Voice Dial (I am new to WM5/PPC). I have not tried Voice Command (which I assume is to enable functions to be run on the JJ via voice control).
Tried everything and can't get it working, I also have a copy of the UK Version and it installs and works, why it works and the US version doesn't I don't know. BUT........in the UK version I can use all the functions except when you say "Call John on mobile" or anyone in your contacts and it opens the contact file and confirms the name before calling, the contact file is blank, the same happens when you just use VC to look up a contact, I say "Look up John" the contact screen pops up but it is blank but if you click on the notes tab the notes in the contact files are there, its just the main contact file that is blank.
Any help
Which version of VC are you using?
v1.504333.21 This is the UK Version
I check for update and it took me to the Microsoft Website and said that I had the lastest version
Can someone help ? I tried Interkey but was not able to make it run with WM2005 on my Universal, uninstalled it but partially. Now I get a notification error each time I open my XDA Exec with this msg: "Cannot execute \Windows\IKAgent.exe". How can I remove it ?
Thank you,
Interkey link
http://pocket-pc-software.penreader.com/InterKey.html
Has anyone ever figured this out? The link above directs you to the interlink website. That doesn't tell you how to delete this horrible and annoying popup. I have lived with this for 2 years and can't stand it anymore. I have deleted all the paragon software I can find. I've deleted everything Interkey. I have searched the registry and deleted for interkey or anything remotely similar. The only thing I can think of as to why this popup keeps coming up is that Paragon over wrote the normal Keyboard file so I need to restore that file. Any clues???
Have you had a look in \Windows\Startup\ folder?
If not look in registry HKCU\Software\HTC\Bootlauncher
Removing InterKey 3.0
1. Go to Start>Settings>System>Remove programs.
2. Select Paragon Software InterKeyPPC and tap Remove.
3. Tap Yes to confirm removal. Wait until the system completes uninstalling InterKey 3.0 and a reboot prompt appears. Tap OK to reboot.
Worked fine for me
Im trying to do the voice command 1.6 hack but when I try to update the microsoft bluetooth registry update is coming back with access error.
Is this an application lock and if so how can I get to remove it?
Yesterday -- after getting my Wing just as I like it -- I installed the Pocket Mechanic trial. Curiosity got the better of me and I ran it's registry cleanup option. When it asked, "do you want to delete these entries?" like a fool and complete noob I clicked "yes."
Now my voice command doesn't function, with a popup that says "voice command has encountered a problem ...." I'm sure when I deleted the registry entries there were a bunch of "sapi" ones -- voice command. Oops.
Anything I can do to restore it??
You may have to reinstall it. What voice command was it? Microsoft Voice Command 1.6?
duprade said:
You may have to reinstall it. What voice command was it? Microsoft Voice Command 1.6?
Click to expand...
Click to collapse
Yes, its v1.6.17740, and I would reinstall it, I'm running Win Mobile 6 -- doesn't it have voice command in ROM?
Really late, but ....
Hey, after deep digging I found a .reg file that did the magic on my Wing! The problem is that the file has some syntax error and I don't know how to correct them, so I had to write every single key and value manually. And It started Working again!!!
Here's a link to the file
Cheers
Hi guys,
What is the best way to backup apps, settings and any other data when upgrading from Mango to Tango?
Also, how do I extract my serial key from windows live that MS rep gave me?
http://forum.xda-developers.com/showthread.php?t=1223619
Is this still the best option?
From dxdy http://forum.xda-developers.com/showpost.php?p=23580112&postcount=3135
BACKUP OF APPLICATIONS SETTINGS AND GAME SAVES
(recommended)
Before flashing new ROM, you can save desired applications settings and game saves.
You can’t backup complete app or game, only settings and saves.
Download Windows Phone Device Manager v1.10.0.0, install, run and sync with HTC HD2
Go to “Manage applications”, wait to scan for installed apps be done
Select desired apps or game which you want backup, right click an select Backup.
To restore backup, install fresh app or game to device, run WPDM and
sync HTC HD2, then run backup file on your PC.
COMPLETE ZUNE BACKUP
Windows Phone Device Manager
Code:
http://www.touchxperience.com/forum/viewtopic.php?f=30&t=783
EgoMaximus said:
Hi guys,
Also, how do I extract my serial key from windows live that MS rep gave me?
Click to expand...
Click to collapse
You must note your key and keep a record of it someplace as it can be reused after a hard reset or a new rom. I have the following precess that makes it easy to 'install' it each time. I wrote this for another thread a while ago:
Note, this is not about getting your Activation code - you must already have your Activation code!!! It is about applying it easily after each Hard Reset.
The Activation code is required when signing in with a Windows Live ID on your Windows Phone 7
The first time that you sign in with your Windows Live ID on Windows Phone 7 you may see the following message prompting you to enter an activation code:
--------------------------------
| ACTIVATION REQUIRED
|
| An activation code is required before we can finish setting up your
| Phone. Please contact customer service. You can skip this step and do it
| later.
|
--------------------------------
Here's how to set the Activation code by installing an XAP rather than entering all those characters manually.
It is much easier and worth the few minutes to setup. Simply make this the first XAP App you install and then log into Windows Live using your email address etc. and it does not even ask you for an Activation code.
Repeat: you must have your Activation code already!!!
OK here you go. I've done it a couple of times now as suggested by xboxmod in WP7 Registry tweak
MS Activation Code so you don't have add it manually use the following
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\GwpCPC]
"ActivationCode"="*****-*****-*****-*****-*****"
But take care with the code ActivationCode"="*****-*****-*****-*****-*****"
The "-" are not underscore "_", though they look like it, but dashes "-" (hyphens)
- I got caught with this.
Now run MS Activation Code XAP App before logging into to Live/Marketplace. Works a treat and skips the Live Code step. (Obviously you need the code first.)
You can then use it more than once - each time you hard reset or load a new rom for example.
Incredible, thank you,