this is my software :
ROM : 4.00.05 ENG
ROM Date : 06\05\03
Radio version : (EMPTY ......) blank !!!!
Protocol Version : (EMPY .......) blank !!!!
Identity : PW10A1
Platform : PocketPC
Imei : .........(Empty) Blank !!!!!
What should i do with this problem ??
thx
Is your pocket still doing it? maybe not! But this tells that your imei has been removed from your provider in most cases this is about stolen or lost items from your provider. In your case contact your povider and ask why your imei has been removed!![/img]
This appears to be a corrupt radio stack, have a good look around the forum, do a search on failed radio stack, or similar. That post about a provider removing the imei physically from a phone sounds extremely unlikely. A phone transmits the imei number when switched on, if the imei is on the blacklist for stolen/lost/barred phones then it is refused access to the network.
ow cruise yip your right, i wrote it wrong
mrgsm said:
this is my software :
ROM : 4.00.05 ENG
ROM Date : 06\05\03
Radio version : (EMPTY ......) blank !!!!
Protocol Version : (EMPY .......) blank !!!!
Identity : PW10A1
Platform : PocketPC
Imei : .........(Empty) Blank !!!!!
What should i do with this problem ??
thx
Click to expand...
Click to collapse
you need send to repair! or I can fix the problem!
First of all i am sorry for my bad English. I live in Russia and bought T-mobile MDA Pro in Germany. I dont know what ROM was in phone (i think that Pro_AKU2.0_05-2006 from oficial site of T-mobil in Germany). Phone was sim unlocked because i input one of my sim cards and phone work. But i need Russian language and i update my phone UNI_TMUK_130114_130232_11003_WWE_BL101_Ship
As i know this ROM update BL to 1.01
ALL was best. I see Congratulations do hard reset. BEST. My phone is work and it on English. I input anoser sim card and phone writ that it is invalid or missing card. I read in internet including this forum and know that it is radio. If apdate radio on 1.09 phone will work fine with both sim cards.
I try update radio, but ERROR 144 and nothing. I try a lot of radios and ROMs and nothing - ERROR 144 (or 114 i don't remember). It means that i coldn't update radio. In log file RUU all ok but in the end write that radio status "0".
All others parts of ROMs updates is perfectly. I install a lot of nk.nbf and ms_.nbf. I read in this forum that i may update old firmware ROM and unlocked, but i try update and nothing.
Also i try:
JASJAR_BL1.01_RUU_v1.2
HTC Universal SPL 1.2
359682-bl1.01_ruu_uni_v1.2
Universal_radio-1.13_(T-Mobile-German)
Universal-dump-radio-1.14.10.img
HTC_Uni_SIM_Unlock_v1
and nothing. MY RADIO is blocked.
Also i try mtty and comand task 28 55aa all successfully. My phone have black screen and not work. On forum write that this comand is clean phone and i may update by any rom. NOT.
I try any rom and nothing. ERROR 114. Radio update stopped.
I deleted radio.nbf from ROM and apdate WM6_21006_RUS_11500. ALL OK.
I start my phone. WM 6 started and i see that radio some as was early 1.10.03. My phone work with first sim card and not worked with second.
I dont update my radio. I'am crazy or my hand's crazy, but radio not update.
I NEED HELP.
NOW i have:
Microsoft Windows XP SP2
ActiveSync 4.5 ENG
ROM
2.10.06 RUS
03.11.07
1.10.03
42.44.P8
I don't know what i can do.
To my mind i don't stupid. I updete a lot of roms on Magician, Wizard, Prophet, Gene and all was best.
HELP ME, PLEASE!!!!!
This is my log
14:53:38:015 [msg] : Version : [2.11].
14:53:38:031 [msg] : Config Info : [857873],[1],[0],[0],[1],[0],[0],[1].
14:53:38:687 [msg] : MSystemFile Not Exist !
14:53:38:687 [msg] : CEFile Not Exist !
14:53:41:921 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
14:53:46:015 [msg] : Disconnect ActiveSync .... [2]
14:53:46:015 [msg] : Start Get Connect Port.
14:53:46:234 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
14:53:51:562 [msg] : Device ID is Special .
14:53:57:796 [msg] : Check Ac in BL mode. AC : [1]
14:53:59:296 [msg] : IsBL. BL : [1]
14:53:59:328 [msg] : =============================================
14:53:59:468 [msg] : START UpdateRadio !
14:54:08:593 [msg] : Check Radio Level 0 [704].
14:54:10:187 [msg] : RUpgrade 0 : 0 Start.
14:58:59:437 [err] : RWipe Data Error.
14:59:00:078 [err] : BL UpdateRadio Error.
14:59:00:125 [msg] : START UnInitialization !
14:59:00:156 [msg] : END UnInitialization !
14:59:00:406 [msg] : IsBL. BL : [1]
NO GSM FIX FOR SOME PHONES:
CLICK ON LINK
http://forum.xda-developers.com/showthread.php?p=2276981#post2276981
POST #56
I am making this thread so someone can please help us users of a HP hw6900 Series with the "NO GSM" startup message.
I have a HP hw6925, NO GSM, my product was under warranty and I recently sent it in to HP, , it would cost almost $300.00 for a new board, and I had the warranty at that time.
My next attempt to try and fix this issue will be what is posted at the link below.
If anyone out there has any "Sable" Backups, post in this thread, email me at [email protected]
I will post them on rapidshare, and alternate sites for everyone to download.
This is a huge problem. These HP hw6900 are nice phones, most of us still want to be able to use them as a phone, and a "PDA", some of us right now inlcuding myself can only use them as a PDA, or not at all, I will posting links later today, that should get any SABLE from the "Stuck on Bootloader Screen".
I am willing to donate to anyone who is serious about helping us fix this issue if it is possible, without replacing the mainboard of the hw6900, I will also be calling HP, and post the part number here and actual price for the hw6925 board.
"stuck On Bootloader"
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK
My Current hw6925 Status
"NO GSM" When Booting Up
I beleive it has No RadioOS.Nbf & No RadioFS.Nbf & No Imei.
Here is a screenshot of the Asset Viewer on the GSM Tab
Windows Mobile 6, Windows Mobile 6.1 Port
Official Windows Mobile 6/6.1 Port for hw6900 Series
Let's Get started people, Contribute to this thread.
If you have any Full Backup's of any hw6900 series thread post on rapidshare.com or mediafire.com
If you can not let me know by email, I will figure out a way to post them for you.
Again, any programmers willing to help any of us hw6900 Users, Please Help
Let me know the paypal account to deposit to via pm, I will post that information via this thread.
I need official 1.30 Cingular Roms from "Working" Devices.
If you can backup everything, including, RadioOS, RadioFS, CEOS, CEBL,
for those of you with fully working devices, please contribute to this thread.
Everyone please, I am trying not to wake up and see myself as the only one posting in this thread, I'm not the only one that wants this or the only one with problems with their hw6900 Series phone.
Please Contribute
HP HW6925 Repair Costs
Repair Cost $286.48 + Sales Tax.
Payment by Credit Card
Will take 3-5 Days,
I beleive they ship the box to you. (I think)
To much for my blood, May as well get a I-Phone
Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++
Radio Backup
dexxa05 said:
Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++
Click to expand...
Click to collapse
Do you have at least a 1 - 2 gb minisd card?
If so download mtty here
http://buzzdev.net/downloads.php?file=75
If you have Windows Xp, (CTRL-ALT-DEL) end process for wcescomm.exe (something like that).
put 6915 in bootloader mode, connect to usb port, press ctrl-alt-del, make sure activesync process is not running (WCESCOMM.EXE .......)
Start the mtty1.42.exe program
you should see:
USB>
now type
d2s 60000000 800000
If you have any problems please email me or im, [email protected]
Alot of people need this file, if possible, I am willing to even remote desktop connection, if you are unable to extract the radio rom.
Let me know what happens
i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process
jambongo said:
i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process
Click to expand...
Click to collapse
Do you get a "Cal Cheksum" on your Screen
try backing up your device using awizard tools, posted on here in the somewhere,
full backup including radio, ext rom, etc ........
then post it here
I will begin the Real WM6 Port
here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0
Awizard Tools
http://forum.xda-developers.com/attachment.php?attachmentid=26038&d=1138056282
Download the link above, then, run the program in windows 2000 compatibility mode, choose that by right clicking the file, click on properties, then, compatibility tab, check mark run in
compatibility mode, choose windows 2000, click apply ok, then run the program, choose the option for backup your device, backup everything choose [Y] or [YES] to everything, including radio, os, ext rom, .....
Follow the directions, beleive the device has to be connected to activesync, let me know what happens, any questions email, me,
Anyone else can do the same, lets fix these Sable devices, and start on a WM6 Port,
jambongo said:
here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
MAC Address : 00-17-E5-A4-B3-97
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
MAC Address :
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
IMEI Number :
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0
Click to expand...
Click to collapse
gave the tool a shot, but it gives me this error when it tries to backup the radio:
Code:
ERROR: ITTFFSGetInfo: outbuf==NULL
WARNING: using default 512 bytes for sectorsize
CopyTFFSToFile(0x50000, 0x280000, ROM\sable\sable-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
besides that no problems generating an OS and a boot.rgu image file
Okay, I'm also using a hw6915 with original german ROM, and I'm interested to get an to help getting WM6 on it.
Where is the problem? So many HTC devices have been got to run WM6. I thought the 69xx has also been built from HTC. Is there such a big difference, or is the "Sable" just a rarely used device so that no one knowing how to do is just doing it?
I am using the hw6915 with english uk original rom.I would like also to see the wm6 on my device..But the problem is that the developers will not fix a version for this device,because they are not interesting for this.We would be lucky if somebody of them had a device like ours and he had the grazy to make a version for this,for his own use,but they have Htc all of them and our mobile is old for their fancy now...Too bad..
any progress on this?
jambongo said:
any progress on this?
Click to expand...
Click to collapse
no progress at all, no one to help, or even a email reply back
my knowledge is limited in this area, but I am more than willing to help, I did provide a partial backup to you about a month or so ago
I'd still love to see a Windows Mobile 6 or 6.1 upgrade. I'm not sure how I could help. Does anyone else know why no one has cooked one up? I'm guessing no one who can owns one of these things.
I have a 6955 and will be doing a backup soon. I will post it as soon as I have it. Lets get things rolling.
This link should help with raw ROM dumps through the bootloader.
http://forum.xda-developers.com/showthread.php?t=325683
Hello,
Sorry for my english
Big problem with my Elf
Without SIM, it starts without problem.
With SIM:
- power off after smart mobility and obliged to remove the battery
OR
- asks me PUK code (and when I enter the PUK told me he is not good then it's one I on the website of Orange France.. and my other phone not asks me the PUK code, just SIM code !!! (LG KS360))
And often, after reboot, the date and time back to 00:00 01/01/00 !!!
I don't understand
I even reloaded original ROM !!! (IPL, SPL, RADIO, OS, extROM)
Touch version : Elf
Device ID : ELF010000
CID : HTC__203
IPL : 2.20.0002
SPL : 2.20.0000
ROM Version : 2.20.406.1
ExtROM Version : 2.20.406.101
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 8
RAM Size (MB) : 64
ROM Size (MB) : 128
Model No. : ELF0300
Part Number : xxxxxxx
SIM Unlock Code : xxxxxxxx
Problem with my phone or with my SIM ? If it's my phone, do you have ideas ?
PS : battery full
Thanks
Hi
It's very easy to check if the prob is with the sim, try with another sim
If the elf was lost/stolen it might be blocked too.
No problem after 10 reboots with the SIM of my girlfriend. It seems that it comes from my SIM. Sometimes turns off after smart mobility, sometimes it asks me the PIN and it works properly, sometimes it asks me the PUK code after entering the correct code SIM. On my LG KS360, no problem, it's strange no ?
Especially the fact that sometimes extinguished after Elf Smart Mobility is strange...
I thought it came from multiple flash ... (IPL / SPL / OS / RADIO)
tito12 said:
If the elf was lost/stolen it might be blocked too.
Click to expand...
Click to collapse
No, my Elf was not stolen, I bought in store in 2007.
By cons he remained some time with "SIM off" after termination of my subscription (my old number). After he spent more than a year in a drawer without starting...
How did you solved the problem???????
Read my story!!
http://forum.xda-developers.com/showthread.php?t=635263