I have been up for hours...I got my Magician PB10B unlocked with an unlocker but it will not accept any sim card (I have tried 3 different networks-bandwidth). I think it need re-flashing but my problem is I can not find a reset hole -there is none! So how do I get it in the bootloader mode to flash? Please help me!!!
Related
Is there a software or any tricks to by-pass the phone lock (password) on the T-Mobile MDA? I'm new at this, if there is a way please show me step by step. thanks in advance.
: Best Regards Babysheep :
Have you tried a hard reset or a new rom?
If you mean the simlock: search for a thread on "lokiwiz", that enables you to remove the simlock from your phone and CID unlock your phone so you can flash another ROM on it. If you are talking about the password, do a hard reset or flash a new ROM on it.
I think I'm getting the same problems as the OP. I also bought a MDA off ebay, that's still locked to T-mobile, but I dont have a T-mobile SIM card. So I can't use the "lokiwiz" program because I can't even access the OS. I also cant get my IMEI number for the same reason. So I can't buy a code online. So I'm stuck. I'm also not in the US so I can't borrow my friend's SIM to unlock it or anything like that. Would flashing the MDA to a new rom stop this? I'll appreciate any help, thanks.
kronarq said:
Have you tried a hard reset or a new rom?
Click to expand...
Click to collapse
Hi, first off, how do you do a hard reset? and I tired new rom but I am not sure if i did it right or not . I have just read the in t-mobile site to perform a hard reset but due to phone lock, i can not hit start and go into settings.. Please help! I know this is not a sim lock. The phone is asking for a 4 digit phone lock password.. any ideas?
For a hard reset you need to hold the comm-button on the upper left corner of the phone and the camera-button on the right side of the phone while it boots up. the esiest way is to do a soft reset and then hold the two buttons till you get the installation screen on your phone.
I think this thread is a bit confusing, since there are two locks being discussed in here right now.
babysheep is having troubles with the password that is set by the previous owner, that can be solved by the hard reset as said by freezor. His advice is a fine way to hard reset, the T-Mobile way has the same results, but is not possible due to the password. Use freezor's method and you should be ok.
Jugges is having simlock problems. Can you contact the seller to ask for the IMEI code? Alternatively, you can perhaps buy a T-Mobile prepaid SIM, although I am not sure that would work. Perhaps prepaid SIMs are also locked from the phone. Flashing a new ROM will NOT affect the SIMlock, so that is no option for you. Perhaps you better post your problem in the lokiwiz thread, perhaps they can help you better than we can here.
I think I should have read into Lokiwiz deeper. I didnt realize that you can still sync with your computer when there is no SIM installed. This allowed me to install the Lokiwiz cab, and unlock it. So everythings working now. Thanks for the help.
Hard Reset
I am also attempting a hard reset; the problem when I do the soft reset while holding the com and picture buttons, the screen that appears is 3 wide horizontal bands colored red, green, and blue. The only text is IPL 1.08, then a little below that is SPL 1.08. Any ideas?
Help!
Yesterday when i was trying to installed Leies CE-Star Crossbow on my x01ht, maybe it didn't support WM5.0 and now my x01ht is stuck in the bootloader screen forever!
I've tried to flash it again by micro SD card, it did completed the flashing process but it's still the same, stuck in the bootloader screen.
i've also try the mtty usb connection and set 14 0, still the same...
my bootloader version is 1.04
will there by anyway to fix it??
Please help...i'm a newbie to ppc and i've only been using the phone for 3 days!!
hi, as first look on wiki - http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes then for example in here - http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES or here - http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems problem 4. then ask us if it is another way to solve your problem ;-) and if this did not help, provide us more information about your device.
i have tried using the SD card flashing method with RUU_Hermes_DopodAsia_CHT_1237084_1060010_SHIP and HER_DopodAsia_1237074_1060010_WWE_SHIP.exe rom
But still no difference
do i need to use HTC Hermes SIM & CID Unlock . v3 first even though it's 1.04 bootloader?
does it work on my x01ht??
Please help...i'm really confused
hi,
I recently buy a SPV M600 and this was working fine! When a try unlock that for put a difrent company sim that never start up again! Now the item freeze on first screen, where that show the IPL,SPL,OS and GSM versions!
Anyone have solution for this problem? I try update the rom, for a RUU but the problem still .
Best regards
gats
Have you tried a Hard Reset? (Hold the Comm Manager button and the Camera button and soft reset)
yes, i try a hard reset, phone restart and freeze again!!
I think about it , and the phone are Sim locked and CID locked, is for that reason he freeze?
Is it a G3 device or a G4 device?
The SIM Lock shouldn't cause this, but try taking the SIM out and seeing what happens.
is a G4 model.
Sim card was always out, because it isn't unlock to put my sim.
Nobody can hep me? I upgrade the rom for the original of orange in same language but the phone continue freezing at start!
I don't no what i can do more!
Normally, you should SIM unlock before flashing the ROM...
What brand is the device?
I think i found the problem! I didn't flash the rom before updating and didn't unlock CID. I am thinking now, how to repair the phone now!
So, the phone are sim locked and CID locked, i ll CID unlocking with hardspl, but i ll not can copying the necessery files into pda directory, like this said on "Rom flashing for dummies" on Wiki!! So can i flashing the rom from BootLoader?
The phone is in used condition, but it all functionally becuase i work with that before update the rom and have this problem!
Best Regards
Gats
If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo ck and then flash a New ROM.
If it's in/can get to bootloader, it should be possible to flash a WM5 NVID ROM. from there, you can HardSPL, SIM unlo c
ck and then flash a New ROM.
I got old tytn (not from network) from friend. I can't turn on phone in the comm manager. I tried different roms and hspls (1.40 and 2.10). But I can't flesh radio to phone it just got stuck at 0%. After soft reset it got stuck at bootloader, so i need to flesh rom (os) again to run Win. I assumed is locked, so I tried sim unlock v3a from pof, it make no difference.
Can it be hardware problem?
Please help.
I too have the same problem, I can not flash the radio and the phone is not online, I would like some advice, thanks
Hi,
Dont ask me how, but I managed to go through wrong sim unlock codes for 10 times in a row and my phone is useless now.
Does not accept even the original sim card - message goes like too many attempts, only emergency calls allowed.
I have tried hard reset but no luck.
Now I do not need even to sim unlock it because my son will continue using it with the original sim card.
Please advice.