Related
!!!
I just tried to do the 3.16 update via dcd's instructions and now I see this, frozen at the sprint splashscreen. I tried a hardreset
I got until step 3 -- Flash new ROM, it went through no problems
WHAT TO DO!?
PLEASEe HELP <3 thanks in advance!
read..why flash a rom if you cant read?!
if i remember correctly, it is because dcd's rom doesnt include the new sprint radio.
either flash the sprint radio by itself, or flash the unofficial sprint rom followed by whatever ya want after that
of course it's gonna be a pita since you didnt do your research beforehand. tsk..tsk...
SOLUTION
Actually I think you did everything right...
... you just overlooked the same thing that I did ...
The instructions are a bit vague on one thing (for those of us who haven't done much rom flashing before)
You must load the new radio BEFORE your new rom will even boot!
----------that is why you are hanging on the yellow Sprint boot screen------------
1. This means you need to go back into "boot loader mode" (hold power and camera and reset with stylus)
2. Then run titan_radio_3.27.00.exe while your phone is hooked up via USB)
After that finishes you should be rockin with the rest of us!
Im trying to load a custom rom onto my XV6900. I got everything together and went a head but ran into an issue. I'll start with all the phones history. I got it and then when the update to 6.1 leaked I installed that. Now just recently I started by following this tutorial http://www.atwistedweb.com/xv6900/index.html. I completed everything up until install upgraded radio with no problems. Then on this step I kept having an issue where it would flash loding but then just go to the boot screen and not do anything. After playing with it for a while I figured maybe the 6.1 update took care of this so I moved on. I got the same problem with the next step which after a little bit I figured out was because I wasnt formatting the card correctly. So then I started the ROM flash with no problem. It loaded and the progress bar completely filled up quickly. The issue is now it is just stuck saying update in progress and has been for about 20 min. Im not sure if its because I didnt do the radio update or if its somthing else. I figured before I do anything I would see what people suggest I should do next. Should I soft reset? Do you think its bricked now or will I be able to try another flash? Please let me know where to go from here. Oh and also the rom im trying to flash is this one http://forum.xda-developers.com/showthread.php?t=432487
thecaptain0220 said:
Im trying to load a custom rom onto my XV6900. I got everything together and went a head but ran into an issue. I'll start with all the phones history. I got it and then when the update to 6.1 leaked I installed that. Now just recently I started by following this tutorial http://www.atwistedweb.com/xv6900/index.html. I completed everything up until install upgraded radio with no problems. Then on this step I kept having an issue where it would flash loding but then just go to the boot screen and not do anything. After playing with it for a while I figured maybe the 6.1 update took care of this so I moved on. I got the same problem with the next step which after a little bit I figured out was because I wasnt formatting the card correctly. So then I started the ROM flash with no problem. It loaded and the progress bar completely filled up quickly. The issue is now it is just stuck saying update in progress and has been for about 20 min. Im not sure if its because I didnt do the radio update or if its somthing else. I figured before I do anything I would see what people suggest I should do next. Should I soft reset? Do you think its bricked now or will I be able to try another flash? Please let me know where to go from here. Oh and also the rom im trying to flash is this one http://forum.xda-developers.com/showthread.php?t=432487
Click to expand...
Click to collapse
Ok, just try and download nfsfan's 6.5 rom, put you phone in bootloader mode, (power,camera, softreset) The colored icoke screen should come up. Connect your phone to your computer with your usb cabe, on the bottom of the screen it will say usb connected (or something like that). Than just run RomUpdateUtility in the zip file you downloaded with the rom. It will connect to your phone and update it. After it's done, before it loads into windows perform a hard reset (send key, end key, and softreset). Once it's doing restoring again, allow it to boot up.
Should be okay after that. I've done several of them with no issue. Sometimes in rare cases you need to flash the latest bell rom first, and than update to nfsfan's 6.5 after that. Don't worry it won't 'relock' your phone.
Good luck
Ok here is an update on the phone. I tried installing the radio update but it froze on cdma. So then I grabed the verizon 6.1 update and reflashed it. So now im back to square one. What steps should I follow from wm 6.1 to a custom rom? Do I need to do the radio update or is the Rev A. included in the 6.1 update enough? If I need to do the radio update how would I go about that? Then is there a better process to follow for the ROM install?
thecaptain0220 said:
Ok here is an update on the phone. I tried installing the radio update but it froze on cdma. So then I grabed the verizon 6.1 update and reflashed it. So now im back to square one. What steps should I follow from wm 6.1 to a custom rom? Do I need to do the radio update or is the Rev A. included in the 6.1 update enough? If I need to do the radio update how would I go about that? Then is there a better process to follow for the ROM install?
Click to expand...
Click to collapse
What are you trying to accomplish? Do you simply want to flash a custom ROM or do you want to unlock the GPS too? If you are trying to unlock the GPS then this tutorial may not help you. http://www.atwistedweb.com/xv6900/index.html
I assume that your phone is already unlocked with 2.31. Once your phone is unlocked all you need to do is flash your custom ROM. This is unless you want to unlock the GPS. I would not worry about upgrading your radio just to upgrade it as there probably no benefit. I wouldn’t do it unless you knew of someone in your area that had success with better signal.
If you want to unlock your GPS I would follow this tutorial. As people have had success.
http://wiki.ppchaven.com/index.php?title=Pocket_PC_WIki:FIX_VERIZON_GPS
[1] Unlock with 0.40.coke
[2] Flash Sprint ROM RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133_Ship DO NOT LET CUSTOMIZATIONS RUN
[3] Unlock with 2.31.coke
[4] Flash Verizon ROM RUU_Vogue_VZW_WWE_3.14.605.1_Radio_3.37.77_Ship DO NOT LET CUSTOMIZATIONS RUN
[5] Flash any custom rom
[6] Skip
I would recommend using NFSFAN’s ROM. The above procedure should allow you to use your GPS with TomTom, Garmin, & such.
do the tutorial above for gps.
and if you need more info or want stuff to customize it, go to my faq,
but the above walkthrough is the one you want if you plan to use gps.
Hello XDA-ers.
I've flashed my phone with the new ROM from the htc website.
And today i wanted to put Dutty's ROM on it, but it wouldnt flash.. the update would get stuck on 0% and then nothing happens for 20 minutes..
I also tried the udK_Lea_R5_MW6.5_WWE rom but the same thing happened.
Is there something wrong with my phone?
Thanks in advance
You need to use Hard-SPL.
READ THIS and follow instructions!
http://forum.xda-developers.com/showthread.php?t=520312
Simple things first:
Have you run HardSPL? (Latest version is required, 1.83 at time of writing).
Have you tried loading into Bootloader manually before attempting to flash? (Hold VolDown when powering on).
If those fail, try and identify what has changed since you flashed the original ROM.
Aaah didnt knew i needed HardSPL..
First time i flashed my ROM it immidiatly worked =p
Thought that ROM screwed my phone in ever being flashed again .
Just needed the HardSPL ^^
Working smooth now, thanks !
after my phone rebooted once the update was complete, it wont get passed the "at&T World Phone" white screen... SOMEONE PLEASE HELP ME!!!! i was using a stock at&t pure with the stock rom. i can not upgrade hardspl or ANYTHING any suggestions on how to get my phone to boot? hard-reset went through with no signs of failure but it still will not boot up after that finishes... sorry if its something im overlQQKing, but i just cant figure it out. n yes i have researched although obviously not enough at this point. Thanks to anyone who can help in advance. forgive my stupidity!!!
......
noone?????
The HTC Pure updates hosed my phone too, I had already applied hard-spl to my Pure and i've flashed it with dozens of roms. Since I was currently using one of the "Stock" AT&T roms posted on XDA I figured I could apply the updates. Unfortunately after applying the update my phone froze at the boot loader. I was forced to flash my rom using the memory card method and then restore a backup.
you could try putting the phone in SSPL mode manually, (reset button+volume down), the run hard-spl hard-spl in manual mode.
you can then flash your rom using the memory card method. (FAT32 formated memory card, rom file renamed to topaz.nbh copied to root of flash card, reset button+volume down to enter SSPL, power button to confirm flash).
All this assumes you've already tried to hard reset your Pure (reset button+vol up+vol down)
Thanks for the reply! Unfortunatly, i tried the manual method and after it hanging at 0% for about 5 minutes, i keep getting error [262] update error.. (communications error) is this becuase i can not sync with mobile device center (win7)? I really dont want to just have to toss the phone! I have had an at&t tilt, at&t fuze, and now the at&t pure, and this is the only phone i have had this problem with for some reason...
Try Unplugging Your Pure From the computer Take Out the Battery Put the Battery Back in Mean While Restart your computer and Press Power And Volume Down At the Same time on your Pure If its on the colored screen your good,..Make sure your system is online and your not downloading anything and plug in your Pure to the computer it give it about 2 minutes to download the HTC USB driver then once its done your phone will say USB on the bottom of the Red Green Blue And White four color screen Then open up one of your ROM's and Flash it,....Do You Have Windows Mobile Device Center Installed?
If Not here is the Link
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you do already you need to uninstall the Driver update for windows mobile media center then install it again .
i can get the bootloader screen just fine! i just can not get hardspl to flash onto it. it sits at 0% every time. the phone will not boot so i can NOT get into mobile device center. The tri-colored screen comes up with no problem and it says USB on the bottom, so the drivers are already installed. I even tried hard-reset and still no luck
There was an additional cab file I needed to install to HSPL the Pure
"enablerapinew.cab"
basically the machine just would fail to load the HSPL without it
but it still functioned afterwards, does yours?
Do a search on XDA find and DL the cab (or I could attach a zipped copy)
If you can still access the device,
just copy enablerapinew.cab to any temp dir on the device
the execute it through fileexplorer
then go back to installing the HSPL (mine then worked fine)
If you haven't already, You should go to
http://forum.xda-developers.com/showthread.php?t=520312
you'll find troubleshooting info and a link to the extra cab there
If you really are bricked at this point , it sounds like nothing has actually
been changed on your device yet? its just frozen should be still under warrentee? Unless anyone else has a better suggestion you should be
able to return it for exchange to ATT
Good Luck
KJL
It sounds like Windows is not properly recognizing your device when it is plugged into the USB port while in SSPL mode.
Have you tried different ports?
Is there another computer you can use?
another thought about returning under warranty
on the boot page of the stock Pure it indicates HSPL 1.83.000
After you update the HSPL it will say HSPL "1.83.Olinex"
this normally an indication of a successful update,
but it will probably void your warranty if they just look at the boot screen
This is true for all Pure (and Tmobile Compact V) Rom upgrades
The Stock Pure came with 6.5 and therefore the 1.83.00 HSPL
The Diamond2s did not, so their solution which reverts to 1.63 <?>
will not correctly revert to 1.83.00 on the Pure.
No way to correct this yet as far as I know,?
All the "reverts" are geared toward the Diamond2s, not the Pure.
But If your boot screen indicates 1.83.00 before it freezes
I'm fairly sure its still entitled to a warranty repair/replace
How could they tell the cause of the failure
was a reburn as opposed to natural causes?
Good Luck
KJL
When you put the phone into a manual bootloader mode... Mobile Device Center becomes obsolete.
HardSPL is only needed for unofficial roms. Forget HardSPL for the time being. The goal here is to get your phone operational. Just download the official HTC WM6.5 WWE rom and flash that. Put phone in manual bootloader mode and run the Rom installer.
As long as your phone is in bootloader mode and says "USB"... then your set to go.
Another solution is to try another PC. You'd be surprised how often that will resolve your issues. Perhaps find an XP machine and install Activesync (so it loads the bootloader USB drivers). I had to do that on several occasions when my main PC refused to flash my mobile device.
I did both of the updates htc has for the pure. Both worked fine. I am on the origianal rom. It does reboot your phone and stays on the white screen for a min then it loads the update and the phone starts.
The offical ROM comes back with a wrong vender ID error I guess cause its a "pure" and not the HTC branded "topaz"... NOW what should i do??? Seems like i NEED hardspl so i can flash any ROM, as from what i researched, there IS NO AT&T Pure rom that has been released. I still cant figure out why a hard-reset will not work though.... This is REALLY starting to get me angry!!!
Just for reference, the Pure's ID is TOPA210 32M
SPL-1.83.0000
The official hotfixes worked fine for me as well. Did you apply the hotfixes on the original ROM that came with your Pure?
Also, does the official HTC Touch Diamond 2 ROM work for you? If so, the hotfixes for the Pure are irrelevant, as are any future updates released for the Pure. You should look for updates for the Touch Diamond 2 on the Worldwide HTC site.
If you needed to do a warranty claim, the closest you can get to returning your phone to stock/shipped form is to use the ROM dump using HardSPL and hope they don't notice that the SPL is different. Currently, there's no way to return the Pure back to completely official software.
A hard reset simply wipes everything off and restores everything back to what is contained in just the ROM you currently have on it. If you've flashed your phone at all, you've already wiped out the original ROM that came with it.
It is still the STOCK ROM. I have never flashed it yet.. The topaz rom will not flash due to a vender ID error. The spl is still stock also... i think thats is why i am having this problem. I bought the phone off craigslist so returning it to AT&T is NOT an option either way. My only solution is to find a fix. (or trash it) I really appreciate all of your suggestions and input so far. You guys are by far the best board around! I am a LONG time follower, but a few-time poster. Obviously i have little to contribute to the board.
Can I trouble you to dig up a few version numbers? It'd help evaluate your situation so we can see which options are best for your case.
ROM version? You can find this in Device Information. Start --> Settings --> System --> Device Information
Bootloader version? Do a soft reset while holding down the volume down button on the side until a screen with red, green, blue, and white, ordered top to bottom, shows up. It should be the second line starting with "SPL-..."
The ROM is the STOCK AT&T ROM (again...) I CAN NOT go to start;.... because if you noticed in the first post, the phone will not boot past the white "AT&T WorldPhone" screen... the spl is stock also incase you missed that part. (1.33.0000) I have never flashed the divice. EVERYTHING IS HOW AT&T SELLS THE PURE OUT OF THE BOX! NO MODS. NO FLASHED ROMS. NO HardSPL... NOTHING! STOCK!!! (for those overlooking the details in my previous posts) I have no doubt you guys (n hopefully a few girls ) will help me fix my issue. I'm just REALLY anxious for it to happen sooner than later!
Have you tried downloading the official rom here on xda and renaming it to TOPAIMG.nbh and update using the sd card method?
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=600339
The download is in post #1
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
You can flash hard SPL the same way by renaming the .nbh file to
TOPAIMG.nbh
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
Actually that is supposed to be an officially signed rom. If that is true it will work with the stock spl. It will either work or it won't. Also, as stated in the response after yours, you can apply the hardspl via SD as well.
I know apparently this isnt the best way to flash your HD2, but im stuck without any access to windows. (mac user)
i cant seem to find step by step instructions on how to do this properly....
is there a link somewhere i can get to so i can figure this out? isnt it as simple as copying the custom.nbh file to the root of my memory card, and entering the bootloader screen?
Sorry for all the noob questions.
take ruu_signed.nbh, copy it to sdcard formatted fat32 (2gb cards seen to work best) rename it leoimg.nbh, boot to bootloader and it should detect the image and ask if you want to flash.
it still requires hspl, unless you have a goldcard(easier to borrow a pc for two minutes to apply hspl than make a goldcard)
the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now
newnoise1024 said:
the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now
Click to expand...
Click to collapse
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck
sabes143 said:
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck
Click to expand...
Click to collapse
True, flashing a stock rom via sd card will overwrite hspl with the new stock spl, but you will not necessarily be stuck. That used to be the case before hspl2, as the original hspl only worked with spl 1.42.0000. HSPL2 now works with 1.42.0000, 1.66.0000 or 2.08.0000 spl's.
or just throw your mac away and buy a PC
What many forget is that you actually need an SD card and not SDHC, as those will not work.
understand u already flash hspl,
microSD / microSDHC will work as long it is formatted with FAT32 fs.
just copy the *.nbh to SD root & rename it to LEOIMG.nbh.
enter bootloader, follow on-screen.
if bootloader cant find any rom image, run scandisk & try again.
gd luck.
I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?
url_paul said:
I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?
Click to expand...
Click to collapse
when you say "just flashed this rom", what rom?
also, did you read ALL the first few posts in the chefs thread? chances are it requires a specific radio version
either that or you didn't do a hard reset after you flashed.
apologies, I replied in here when I thought I was in the HTC Energy thread.
The device rebooted after the flash.
Does that not count as a hard reset?
samsamuel said:
Is it T Mobile usa? if so, then you have flashed an incompatible rom.
tmous (T Mo US) phones will opnly take roms based on 2.10, the rom you have installed is 1.66 (D 1. 66. Kumar)
Kumar has a rom in the Tmo US section based on 2.10, you should use that, not the one in teh normal hd2 section.
With power off, press and hold "volume down", tap the power key and continue to hold vol down until you get the three coloured screen, connect to usb, wait for word 'serial' to become 'usb' and flash a compatible rom.
Click to expand...
Click to collapse
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Try installing the recommended Radio
url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
I ran into the same problem and all I had to do was to get the phone into Bootloader and then flash the radio recommended by ROM Cook.
also the same problem
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?
groot321 said:
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?
Click to expand...
Click to collapse
RTFM. These constant posts about white screen hangs are really getting frustrating. Does nobody follow the forum rules of searching any longer? There's nothing wrong with the rom, the user on the other hand I'm not so sure of.
YOUR RADIO VERSION IS WRONG
url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
If you bothered to read even just the last 5 pages of the Energy thread you would have seen probably 20 mentions of the problem. Energy rom won't work with a x.xx.51.xx radio.