Im trying to load a custom rom onto my XV6900. I got everything together and went a head but ran into an issue. I'll start with all the phones history. I got it and then when the update to 6.1 leaked I installed that. Now just recently I started by following this tutorial http://www.atwistedweb.com/xv6900/index.html. I completed everything up until install upgraded radio with no problems. Then on this step I kept having an issue where it would flash loding but then just go to the boot screen and not do anything. After playing with it for a while I figured maybe the 6.1 update took care of this so I moved on. I got the same problem with the next step which after a little bit I figured out was because I wasnt formatting the card correctly. So then I started the ROM flash with no problem. It loaded and the progress bar completely filled up quickly. The issue is now it is just stuck saying update in progress and has been for about 20 min. Im not sure if its because I didnt do the radio update or if its somthing else. I figured before I do anything I would see what people suggest I should do next. Should I soft reset? Do you think its bricked now or will I be able to try another flash? Please let me know where to go from here. Oh and also the rom im trying to flash is this one http://forum.xda-developers.com/showthread.php?t=432487
thecaptain0220 said:
Im trying to load a custom rom onto my XV6900. I got everything together and went a head but ran into an issue. I'll start with all the phones history. I got it and then when the update to 6.1 leaked I installed that. Now just recently I started by following this tutorial http://www.atwistedweb.com/xv6900/index.html. I completed everything up until install upgraded radio with no problems. Then on this step I kept having an issue where it would flash loding but then just go to the boot screen and not do anything. After playing with it for a while I figured maybe the 6.1 update took care of this so I moved on. I got the same problem with the next step which after a little bit I figured out was because I wasnt formatting the card correctly. So then I started the ROM flash with no problem. It loaded and the progress bar completely filled up quickly. The issue is now it is just stuck saying update in progress and has been for about 20 min. Im not sure if its because I didnt do the radio update or if its somthing else. I figured before I do anything I would see what people suggest I should do next. Should I soft reset? Do you think its bricked now or will I be able to try another flash? Please let me know where to go from here. Oh and also the rom im trying to flash is this one http://forum.xda-developers.com/showthread.php?t=432487
Click to expand...
Click to collapse
Ok, just try and download nfsfan's 6.5 rom, put you phone in bootloader mode, (power,camera, softreset) The colored icoke screen should come up. Connect your phone to your computer with your usb cabe, on the bottom of the screen it will say usb connected (or something like that). Than just run RomUpdateUtility in the zip file you downloaded with the rom. It will connect to your phone and update it. After it's done, before it loads into windows perform a hard reset (send key, end key, and softreset). Once it's doing restoring again, allow it to boot up.
Should be okay after that. I've done several of them with no issue. Sometimes in rare cases you need to flash the latest bell rom first, and than update to nfsfan's 6.5 after that. Don't worry it won't 'relock' your phone.
Good luck
Ok here is an update on the phone. I tried installing the radio update but it froze on cdma. So then I grabed the verizon 6.1 update and reflashed it. So now im back to square one. What steps should I follow from wm 6.1 to a custom rom? Do I need to do the radio update or is the Rev A. included in the 6.1 update enough? If I need to do the radio update how would I go about that? Then is there a better process to follow for the ROM install?
thecaptain0220 said:
Ok here is an update on the phone. I tried installing the radio update but it froze on cdma. So then I grabed the verizon 6.1 update and reflashed it. So now im back to square one. What steps should I follow from wm 6.1 to a custom rom? Do I need to do the radio update or is the Rev A. included in the 6.1 update enough? If I need to do the radio update how would I go about that? Then is there a better process to follow for the ROM install?
Click to expand...
Click to collapse
What are you trying to accomplish? Do you simply want to flash a custom ROM or do you want to unlock the GPS too? If you are trying to unlock the GPS then this tutorial may not help you. http://www.atwistedweb.com/xv6900/index.html
I assume that your phone is already unlocked with 2.31. Once your phone is unlocked all you need to do is flash your custom ROM. This is unless you want to unlock the GPS. I would not worry about upgrading your radio just to upgrade it as there probably no benefit. I wouldn’t do it unless you knew of someone in your area that had success with better signal.
If you want to unlock your GPS I would follow this tutorial. As people have had success.
http://wiki.ppchaven.com/index.php?title=Pocket_PC_WIki:FIX_VERIZON_GPS
[1] Unlock with 0.40.coke
[2] Flash Sprint ROM RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133_Ship DO NOT LET CUSTOMIZATIONS RUN
[3] Unlock with 2.31.coke
[4] Flash Verizon ROM RUU_Vogue_VZW_WWE_3.14.605.1_Radio_3.37.77_Ship DO NOT LET CUSTOMIZATIONS RUN
[5] Flash any custom rom
[6] Skip
I would recommend using NFSFAN’s ROM. The above procedure should allow you to use your GPS with TomTom, Garmin, & such.
do the tutorial above for gps.
and if you need more info or want stuff to customize it, go to my faq,
but the above walkthrough is the one you want if you plan to use gps.
So, I have just made a couple of changes to my phone. My mistake is that I did it all at the same time. So I dont know what fu***ed it up !
1. I formated the ext2 partition to ext3
2. I added a linux Swap partition (104Mb)
3. I loaded the CN 1.4 Recovery image
3. I installed the SPL 1.33.2005
I have been using JF 1.51 and I was having some issues after a recent corruption so I thought I will try JacHero 1.7 since I was planning on a clean install anyway. So the new SPL was for the Jachero rom.
Anyway, why i think the issue happened while flashing the SPL its because after I flashed the CN Recovery screen came up and it said "Formatting Cache" and it stayed on that screen for like 15 min. and I thought ok, it must be done and the Recovery menu was active so I just scrolled to reboot after which I was never able to boot past T-Mobile G1 screen.
I did eventually update to JacHero 1.7 after a wipe but still didnt seem to work. Still stuck at boot screen.
Any ideas ?
Any help is appreciated !!
Thanks.
If its the spl I know that one if I rem was the tricky one that couldnt be downgraded or so.
http://forum.xda-developers.com/showthread.php?t=517593 is the only thread on top of my head I can link you to. Hopefully it helps.
Sometimes the only way the danger spl will take is if you rename it to update.zip and click on apply sdcard update zip. Try doing that and see, also try a non hero rom and see if it boots, if it does and a hero won't chances are it was the spl
ITS WORKING !!
So I kept on messing around, I went into the SPL settings pressed lots of keys (not much clue wut i was doing) and I tried a couple of restarts and after messing around with everything.......somehow it booted into the new Hero rom (Dont ask me how !) but it was completely screwed up. Meaning, This HTC screen is the only thing I can see. If i turn off the screen and turn it back on, I will see the unlock screen of Hero (which looked really cool) but as soon as I unlock im back to this wierd HTC black screen where nothing happens!!.
Soooo I went back into the recovery mode and tried the nandroid restore option (AGAIN) only this time it went through and completed the recovery ! (It wouldnt do that the last 3 times i tried) and now I back to my JF 1.51
Not really sure if I still want to try Hero anymore
and thanks alot guys for your quick responses......I REALLY Appreciate it.
Thanks again for your help !
It's up to you, cyanogen just came out with donut in his expermental line of roms so now we are gonna be passed cupcake roms soon
Hello XDA-ers.
I've flashed my phone with the new ROM from the htc website.
And today i wanted to put Dutty's ROM on it, but it wouldnt flash.. the update would get stuck on 0% and then nothing happens for 20 minutes..
I also tried the udK_Lea_R5_MW6.5_WWE rom but the same thing happened.
Is there something wrong with my phone?
Thanks in advance
You need to use Hard-SPL.
READ THIS and follow instructions!
http://forum.xda-developers.com/showthread.php?t=520312
Simple things first:
Have you run HardSPL? (Latest version is required, 1.83 at time of writing).
Have you tried loading into Bootloader manually before attempting to flash? (Hold VolDown when powering on).
If those fail, try and identify what has changed since you flashed the original ROM.
Aaah didnt knew i needed HardSPL..
First time i flashed my ROM it immidiatly worked =p
Thought that ROM screwed my phone in ever being flashed again .
Just needed the HardSPL ^^
Working smooth now, thanks !
after my phone rebooted once the update was complete, it wont get passed the "at&T World Phone" white screen... SOMEONE PLEASE HELP ME!!!! i was using a stock at&t pure with the stock rom. i can not upgrade hardspl or ANYTHING any suggestions on how to get my phone to boot? hard-reset went through with no signs of failure but it still will not boot up after that finishes... sorry if its something im overlQQKing, but i just cant figure it out. n yes i have researched although obviously not enough at this point. Thanks to anyone who can help in advance. forgive my stupidity!!!
......
noone?????
The HTC Pure updates hosed my phone too, I had already applied hard-spl to my Pure and i've flashed it with dozens of roms. Since I was currently using one of the "Stock" AT&T roms posted on XDA I figured I could apply the updates. Unfortunately after applying the update my phone froze at the boot loader. I was forced to flash my rom using the memory card method and then restore a backup.
you could try putting the phone in SSPL mode manually, (reset button+volume down), the run hard-spl hard-spl in manual mode.
you can then flash your rom using the memory card method. (FAT32 formated memory card, rom file renamed to topaz.nbh copied to root of flash card, reset button+volume down to enter SSPL, power button to confirm flash).
All this assumes you've already tried to hard reset your Pure (reset button+vol up+vol down)
Thanks for the reply! Unfortunatly, i tried the manual method and after it hanging at 0% for about 5 minutes, i keep getting error [262] update error.. (communications error) is this becuase i can not sync with mobile device center (win7)? I really dont want to just have to toss the phone! I have had an at&t tilt, at&t fuze, and now the at&t pure, and this is the only phone i have had this problem with for some reason...
Try Unplugging Your Pure From the computer Take Out the Battery Put the Battery Back in Mean While Restart your computer and Press Power And Volume Down At the Same time on your Pure If its on the colored screen your good,..Make sure your system is online and your not downloading anything and plug in your Pure to the computer it give it about 2 minutes to download the HTC USB driver then once its done your phone will say USB on the bottom of the Red Green Blue And White four color screen Then open up one of your ROM's and Flash it,....Do You Have Windows Mobile Device Center Installed?
If Not here is the Link
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
If you do already you need to uninstall the Driver update for windows mobile media center then install it again .
i can get the bootloader screen just fine! i just can not get hardspl to flash onto it. it sits at 0% every time. the phone will not boot so i can NOT get into mobile device center. The tri-colored screen comes up with no problem and it says USB on the bottom, so the drivers are already installed. I even tried hard-reset and still no luck
There was an additional cab file I needed to install to HSPL the Pure
"enablerapinew.cab"
basically the machine just would fail to load the HSPL without it
but it still functioned afterwards, does yours?
Do a search on XDA find and DL the cab (or I could attach a zipped copy)
If you can still access the device,
just copy enablerapinew.cab to any temp dir on the device
the execute it through fileexplorer
then go back to installing the HSPL (mine then worked fine)
If you haven't already, You should go to
http://forum.xda-developers.com/showthread.php?t=520312
you'll find troubleshooting info and a link to the extra cab there
If you really are bricked at this point , it sounds like nothing has actually
been changed on your device yet? its just frozen should be still under warrentee? Unless anyone else has a better suggestion you should be
able to return it for exchange to ATT
Good Luck
KJL
It sounds like Windows is not properly recognizing your device when it is plugged into the USB port while in SSPL mode.
Have you tried different ports?
Is there another computer you can use?
another thought about returning under warranty
on the boot page of the stock Pure it indicates HSPL 1.83.000
After you update the HSPL it will say HSPL "1.83.Olinex"
this normally an indication of a successful update,
but it will probably void your warranty if they just look at the boot screen
This is true for all Pure (and Tmobile Compact V) Rom upgrades
The Stock Pure came with 6.5 and therefore the 1.83.00 HSPL
The Diamond2s did not, so their solution which reverts to 1.63 <?>
will not correctly revert to 1.83.00 on the Pure.
No way to correct this yet as far as I know,?
All the "reverts" are geared toward the Diamond2s, not the Pure.
But If your boot screen indicates 1.83.00 before it freezes
I'm fairly sure its still entitled to a warranty repair/replace
How could they tell the cause of the failure
was a reburn as opposed to natural causes?
Good Luck
KJL
When you put the phone into a manual bootloader mode... Mobile Device Center becomes obsolete.
HardSPL is only needed for unofficial roms. Forget HardSPL for the time being. The goal here is to get your phone operational. Just download the official HTC WM6.5 WWE rom and flash that. Put phone in manual bootloader mode and run the Rom installer.
As long as your phone is in bootloader mode and says "USB"... then your set to go.
Another solution is to try another PC. You'd be surprised how often that will resolve your issues. Perhaps find an XP machine and install Activesync (so it loads the bootloader USB drivers). I had to do that on several occasions when my main PC refused to flash my mobile device.
I did both of the updates htc has for the pure. Both worked fine. I am on the origianal rom. It does reboot your phone and stays on the white screen for a min then it loads the update and the phone starts.
The offical ROM comes back with a wrong vender ID error I guess cause its a "pure" and not the HTC branded "topaz"... NOW what should i do??? Seems like i NEED hardspl so i can flash any ROM, as from what i researched, there IS NO AT&T Pure rom that has been released. I still cant figure out why a hard-reset will not work though.... This is REALLY starting to get me angry!!!
Just for reference, the Pure's ID is TOPA210 32M
SPL-1.83.0000
The official hotfixes worked fine for me as well. Did you apply the hotfixes on the original ROM that came with your Pure?
Also, does the official HTC Touch Diamond 2 ROM work for you? If so, the hotfixes for the Pure are irrelevant, as are any future updates released for the Pure. You should look for updates for the Touch Diamond 2 on the Worldwide HTC site.
If you needed to do a warranty claim, the closest you can get to returning your phone to stock/shipped form is to use the ROM dump using HardSPL and hope they don't notice that the SPL is different. Currently, there's no way to return the Pure back to completely official software.
A hard reset simply wipes everything off and restores everything back to what is contained in just the ROM you currently have on it. If you've flashed your phone at all, you've already wiped out the original ROM that came with it.
It is still the STOCK ROM. I have never flashed it yet.. The topaz rom will not flash due to a vender ID error. The spl is still stock also... i think thats is why i am having this problem. I bought the phone off craigslist so returning it to AT&T is NOT an option either way. My only solution is to find a fix. (or trash it) I really appreciate all of your suggestions and input so far. You guys are by far the best board around! I am a LONG time follower, but a few-time poster. Obviously i have little to contribute to the board.
Can I trouble you to dig up a few version numbers? It'd help evaluate your situation so we can see which options are best for your case.
ROM version? You can find this in Device Information. Start --> Settings --> System --> Device Information
Bootloader version? Do a soft reset while holding down the volume down button on the side until a screen with red, green, blue, and white, ordered top to bottom, shows up. It should be the second line starting with "SPL-..."
The ROM is the STOCK AT&T ROM (again...) I CAN NOT go to start;.... because if you noticed in the first post, the phone will not boot past the white "AT&T WorldPhone" screen... the spl is stock also incase you missed that part. (1.33.0000) I have never flashed the divice. EVERYTHING IS HOW AT&T SELLS THE PURE OUT OF THE BOX! NO MODS. NO FLASHED ROMS. NO HardSPL... NOTHING! STOCK!!! (for those overlooking the details in my previous posts) I have no doubt you guys (n hopefully a few girls ) will help me fix my issue. I'm just REALLY anxious for it to happen sooner than later!
Have you tried downloading the official rom here on xda and renaming it to TOPAIMG.nbh and update using the sd card method?
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=600339
The download is in post #1
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
You can flash hard SPL the same way by renaming the .nbh file to
TOPAIMG.nbh
jromeo350 said:
I have downloaded the official ROM. Although I thought it is still concidered "custom" and that you need spl updated to install it... Am I wrong about this? Also, by using the SDcard to flash, do I NEED to have hardspl on the device? If yes, I can not use this method, as I have stated before that the spl is still stock and NOT updated in any kind of way. NOTHING on the phone has been updated or flashed. Will this method still work then???? I am at work for 3 more hours and then will go home and try it either way and come back to update you all on the results. Again, THANK YOU for your continued support in helping me out!! At this point, I will send a donation via paypal to whoever can get me out of this hole!
Click to expand...
Click to collapse
Actually that is supposed to be an officially signed rom. If that is true it will work with the stock spl. It will either work or it won't. Also, as stated in the response after yours, you can apply the hardspl via SD as well.
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol
^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer
sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped