Hi all
I lost USB-connection during a ROM flash and conseqently my phone has been bricked
I can get the tri color screen up but I can't reflash it because I have never flash a hard SPL on it. I have just used Jump SPL because of warrenty and stuff.
So my problem is that I need a USPL and a how to do or an original Danish Pharos ROM. If anyone could make a dump and convert it to .nbh file so I can flash it would be greatly appriciated.
Third option is to flash from SD...can you do that with a Pharos? If so then how?
best regards
Anyone? :-(
Related
i have a problem with one HTC p4350 hera100 his rom is in espaniol and i want to change rom in english with HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe and say "invalid vendor id" i read on this forum and i follow steps of "hdubli" when press " e" everything goes ok but i have one problem when i press "w" for write rom the software don't show me any roms,(i have extract the nbf file and i put os.nb rename to os.nba ) when i p[ress any number it goes out! do u know what problem is! thx!
Do the HARDSPL and you will be able to flash any rom you want.
HARD-SPL
my ipl is 1.xxx what can i do!!! are u shure it work?!?
Read the post and see if it will work for you.
i try with HERALD-USPL-beta3 and now is dead!!! no boot no anything!!! what can i do!!! pls help me
!!
frunzygsm said:
i try with HERALD-USPL-beta3 and now is dead!!! no boot no anything!!! what can i do!!! pls help me
!!
Click to expand...
Click to collapse
try and ask ivanmmj - he is used in falshing with uspl.
soryy
USPL, just like HardSPL requires your SPL to be 4.0.0.0 or higher. You had to run the stock RUU to update to WM6 FIRST to update your SPL. Now, unfortunately, unless you're really lucky, you'll have to bring it in to a repair center. I'm sorry. But first, try to run the stock RUU and see what happens.
Oh no. USPL and HARDSPL are 2 different things! thats why I posted the link to the HardSPL in that post.
Now you need to install your stock RUU to unbrick your device.
duprade said:
Oh no. USPL and HARDSPL are 2 different things! thats why I posted the link to the HardSPL in that post.
Now you need to install your stock RUU to unbrick your device.
Click to expand...
Click to collapse
Well, the only thing I'm worried about is the partition tables being slightly different in the different SPLs and therefore, trying to write them with an SPL of 4.x when the device is formatted to an SPL of 1.x, it might cause a problem. Two different issues, but still issues none-the-less. But that's just a guess.
If you can place the phone into bootloader mode and flash the RUU, then you're right. Hold your camera button while softresetting to get into the booloader menu.
sorry but i cannot understand in that phrase the sintax of "stock ruu" can u help me! meens all ruu that's i have??!?
hy! i read all posts about htc p4350 and i decide to use the HERALD-USPL-beta3 and now phone is dead only bootloader, i try with original flash from spain from support and says" invalid update tool"! here is the story:
i have one htc p4350 with ipl 1.08.0001 and SPL 1.08.0001 from spain and i want to change language to english, i donwload de rom WWE from forum and says "invalid vendor" and i decide to write de nbh file with this program and now phone is how that i say to you up! So u know a metod to write any rom in that situation?? if u know pls help me! thx! so if somebody know a good solution pls share it!
can anybody help me pls!! how can i jump spl into ram or how can i flash a new rom now from bootloader mode!!!
Maybe Try different RUU's to see if one of them works.
What is your phone company? Maybe they have the RUU on their website if you try logging into your account.
my htc is from spain do u know what operator sell this this htc!
I'm sorry. As I said, you'll have to bring it in to the repair center. USPL jumps a hacked SPL into memory. The problem is that you had a pre-4 SPL and that they're not compatible.
thx ivanmmj! i understand but u know how people are...we must hope! for now i see that is no solution but in future u can get one? now i have to pay de phone to customer (!!
hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
rwik5060 said:
hi all,
i'm french,sorry for my little english
i have flashed my polaris but i have not run hard spl
now he boot only in bootloader mode and flash spl is not possible
what can i do?
i have : POLA 100 SPL 1.25.0000 CPLD-2
THANKS A LOT FOR YOUR HELP!
Click to expand...
Click to collapse
Lots of threads on exactly this, check the polaris wiki
http://forum.xda-developers.com/showthread.php?t=425922&highlight=mtty
Also don't miss the part where he says try to flash the original ROM first, or try SD method too
Rwik,
Flash the original / shipped rom back.
Hardspl
reinstall custom rom.
big thanks at all, that works with mtty
thanks thanks thanks!!!!!!!!!!!
while trying some roms i stupidly removed hard spl
and now i cant install or flash any rom some local repair shops advised me to change motherboard do i realy have to???
mdrcute said:
while trying some roms i stupidly removed hard spl
and now i cant install or flash any rom some local repair shops advised me to change motherboard do i realy have to???
Click to expand...
Click to collapse
did you try to reinstall hard spl again?
check this out http://forum.xda-developers.com/showthread.php?t=381600
yes i tried it didnt work
i tried to hard reset too
the installing of the original rom is the only one can be started and will stop in the middle to give me an error
Hhmmmm
mdrcute said:
yes i tried it didnt work
i tried to hard reset too
the installing of the original rom is the only one can be started and will stop in the middle to give me an error
Click to expand...
Click to collapse
how did you uninstall hard spl in first place...
by putting back original spl
What error you get when you hard spl?
it stays on 0% and never move then it asks me to make a recover
1. Unlock your polaris
2. Than Hard-spl your device
PS: Only use the hard spl in the link provided. Disable your antivirus before procedure.
this might work.
thanks at first
but the first link cant be downloaded
and i think it is just an earlier version of hard spl 2.0
so i think it wont be usefull
From what I've read on a while ago on XDA, if your rom flash progress hangs in the middle of the process, it may be because of the fact that your current radio is too new for your 'old', original rom. You should try to flash an earlier radio before you flash the complete original (6.0?) rom.
And if you get it flash half of your rom, you probably didn't remove HardSPL, but correct me if I'm wrong, I'm not that familiar with it.
pola100
spl-1.25.0000
cpld-2
this is on my boot loader or whatever you call it
ok here it is what i need:
I just need to know the how to down grade my radio if i have no windows working in my pda and no hard spl
could any one help me???
mdrcute said:
pola100
spl-1.25.0000
cpld-2
this is on my boot loader or whatever you call it
ok here it is what i need:
I just need to know the how to down grade my radio if i have no windows working in my pda and no hard spl
could any one help me???
Click to expand...
Click to collapse
As I recall, the figures above indicate that you do have the original SPL. You should try to flash an original rom (if you don't have one, i have a dutch one here (wm6.0). If that doesn't work you should try to flash hardspl (hold the camera button while softresetting to enter bootloader) ( http://forum.xda-developers.com/showthread.php?t=351964 ) and then try to flash a newer rom.
Where are you from?
Btw. I forgot to tell you that you need to flash an old radio too if you're going to flash the original rom. (if you don't have one already).
And when you have hardspl on your device, it'd be wise to flash a rom which include a radio.
I'll be away for a couple of hours, so I've put the original (dutch WM6.0) rom (incl. the original spl, but I think (dont know for sure) you need hardspl2.0 just to flash anything.) online here, let me know if your figured it out.
well thank you for all the help
but i am sadly informing it didnt work if the problem is the radio the i just need to flash another one .
it is just i cant or i dont know the right method to flash the necessary radio
would any one please tell how to flash radio from the boot loader when i dont have hard spl
Maybe a stupid question, but why can't you flash hardspl2? And do you have an unlocked device? You don't live in the Netherlands by any chance right?
why I can't flash hard spl 2 ?
actually I don't know
maybe because I am stuck in the boot loader
and sadly I am living in Saudi Arabia so we don't have much programmers around here nor people who have PDA
that's why I can't find someone to help
Can you describe exactly what you do step by step on your pc and pda and how your hardware is connected?
update: and tell me what messages are on your screen and if you get any errors
well first i connect usb so the pda directly starts boot loader (the screen with three colours)
after that whatever (ROMUpdateUtility.exe) i use the installing stops to give me this messege:
the rom update utility has encountered communication errors during the update process . the program will guide you step by step to recover from the errors so you can continue with the update.
this happens with every rom i tried including the har spl exept for the original rom it advance untill 38% then stops and give me the same messege.
if i try the (step by step ) process it ends up the same way .
anyway what i understand that my problem will end once i put (hard spl)
or if flashed another radio all i need to know is how to do either of them from the boot loader.
i have been so needy but sorry for that i am just sad about my pda i like it alot
I dont think it changes anything, but you do keep the camera button pressed while softresetting your device to get into the bootloader?
Usually your device only gets to the bootloader when you do that, but i can imagine that when your rom update failed and the device cannot boot a rom, it stays in the bootloader, but not in flash mode? Worth a try..
Tell me what appear in your PDA screen during boot. I want to know the information on the first screen like below:
R:
G:
D:
These information usually appear on the right bottom corner or your screen when you boot your device.
hi guys.
my x1 front panel doesnt not work anymore.that means all my buttons are dead now.so i have to send my phone to service.I NEED YOUR HELP IN THIS CASE..please help me......
i restored my orginal os,splash,radio from X1i_GENERIC_UK_CDF1215-1832_R1AA017.but i am not sure all the spl are same version.i downloaded ruusigned_072stockspl.zip from olinex Hard-SPL for Xperia X1 - Released! thread.and i restored spl with this spl.because my phone was hardspl.....
now is my phone ready to send service?another word X1i_GENERIC_UK_CDF1215-1832_R1AA017 spl is same as olinex original stock one?because i couldn't restore orginal spl from the uk generic rom.i extracted spl with NBHUtil.exe from original rom but when i tried to flash with this spl i coudnt do it.sorry for my bad explanation.
also my phone does not get bootloader mode anymore.i Press and hold first the volume down button on the phone and then the phone power button.but nothing is happening.so i cant check my spl anymore.i am very stuck.how could i turn my phone to original X1i_GENERIC_UK_CDF1215-1832_R1AA017....
please help.thanks a billion in advance.....
I do not know if my answer is still useful, but:
With the original ROM, you restore the ROM (why do you mention spl while talking about standard ROM?!)
Then, you use the stock SPL provided in the thread (http://forum.xda-developers.com/showthread.php?t=431218) to overwrite Olinex Hard SPL with original SPL.
That's all, hoper you'll get yous SEX1 back soon!
i have a dopod M700 Love which can only get into the bootloader right now after flashing back to the shipped rom. the ipl shows 1.28.0001 and spl is 1.28.0000 any solutions for this?
tried the sd card method and all other roms but not helping... trying to find spl 1.11.0000 please help... thanks in advance.
Try this i uploaded this to my phone and its 1.11.0000
http://forum.xda-developers.com/showthread.php?t=374430
it stops at 79% telling that the file is corrupted any other methods? thanks...
is there any way you can get into windows with ur phone. or can you only get into bootloader.
only managed to get into bootloader