Related
Hey everybody,
I really miss the SMSreport feature from my old mobile phones!! Even though you can turn it on individually for every SMS you send, this is not really an option if you send a lot of text messages :-(
There must be a registry entry where you can change the default from reports off to reports on. Does somebody know what this is?
If other people would like this problem fixed, please say so in this or some other post, to encourage some programmer to look into this.
Thanks for any help.
Manuel
P.S.: To turn on the SMS report when writing an SMS: Edit --> Options.
Hi There. I am really also looking for a fix to this anoying problem.
Perhaps a little app that does the click. A regedit or something.
Thanks alot
Alex
There are other threads on this and for the moment, at least, it is not supported on the XDA. I have looked and cannot find a registry entry or such. I have added this requirement to my 'possible development ideas' list
The only alternative I know which works is to use a special character string at the start of every text. This string depends on country and operator. For me, on O2 UK, the characters are *0# (thats a zero in there) so I enter it in the subject field (I set it up as one of my pre-defined strings) then enter my text as normal in the usual place. Other special strings I know of are: 111 for Fido and *noti# for T-Mobile US.
See here for more.
Sure... I used the search before. But in none of the topics there`s a final solutin.
So i thought I push this topic up again.
Technically a program or reghack must be possible...
Could somebody please figure that out.
Thanks alot
Alex
When i save a contact with name and surname it appears on my contact list like this: Surname, Name (ex: Gates, Bill), can i change this so that the name is displayed first?(ex: Bill Gates).
Furthermore, can i disable the default format by which phone numbers are saved? By default when i add a phone number to a contact it appears like this (xxx) xxx-xxxx. Not that i have a problem with this BUT when i transfered some contacts from my p910 i found out that they were saved like xxxxxxxxxx. So what, you may think...well actually when a message delivery report arrives (and the contact is not saved with the "default phone format"), next to the phone number(in the delivery report) shows the name of the contact, something that is very usefull when -for example- multiple messages are sent or when a message is delivered 2-3 days later.
ps: actually, what i really need is not neccesarily to change the default phone format but to find out a way to see in the message delivery report the name of the contact that the message was delivered to.
ps2:sorry for the huge post!
thanx in advance
I had the same problem 2 years ago, and found out that it is impossible to let the PPC display the name as "Firstname Surname". So I "solved" it by saving the full name of the contact under Firstname. I know it isn't a solution but I couldn't get it to display it how I wanted it.
yeah, i did the same thing, but as you said it isn't a solution
Your problem here then is to hack the deilvery report, not Poutlook.
V
vijay555 said:
Your problem here then is to hack the deilvery report, not Poutlook.
V
Click to expand...
Click to collapse
what matters is to achieve the goal and not how it will be achieved
True, but "Every Journey Begins With a Single Step, Minus Your Shoes".
Knowing what to hack and what not to hack is your first step. Poutlook, I believe, stores the contact data in whatever format it is happy with. You can't change that - you can change the external display of that data through the File As field, but that's subject to the app you are using using that field and not the underlying data stored in Poutlook.
So, if you wish to force the message delivery report into using the fields as you want them, hack that. Poutlook can't be easily hacked and is not your problem. So research hacking the delivery report, and/or learn to hack it yourself to force custom output.
V
thanx vijay555, i found this Name of recipient in SMS delivery receipt on WM5 and i guess this is what i was looking for
this really is very simple (assuming you sync with outlook on your pc).
In your contacts in outlook, double click a contact and in the "file as" drop down change it to "firstname lastname". then sync with your device and hey presto, all will be as you want!
bit of a pain in the arse if you've got 5billion contacts, but hey!
yeah, i discovered it yesterday, thanx anyway, but as you said its a pain...
I don't get it. If you're going to use File As, just use FileasFL to do the conversion automatically on your PPC.
V
Hello,
Is it possible to change the default filter in the contact list ?
By default this filter is "All"; I'd like to set it to "personal"
Thank you for your answers.
Regards,
been looking all over and cant find anything for this. it would be great though!
Edit a contact, go to the categories and change it to personal.
The personal will appear at the filters, if you edit another contact and change the category to work, work will also appear in the filter.
Try it out.
we know how to create filters...the problem is, when you open contacts, there is no filter, you see all the contacts. we want to have it so when you open contacts it is already filtered, say the last filter you picked or a default filter like personal or work. going to filter and changing it everytime i want to see a number is annoying
I have already put categories to all my contact.
The only thing I want is to see only personal contact when I open the contact list.
I searched in the registry but i found nothing ...
Nobody can help us ?
sadly i think nobody cares about this pain in the ass problem keep looking...
Yes, please, please, please.... Can anyone shed any light on this?
I too am frustrated that WM6 does not seem to have the ability to "save" the previous filter, or to let the user choose which filter to have as default (rather than having "all" as default, then requiring a manual filter each time)
It is REALLY frustrating having to trawl through ALL the contacts each and every time.
I have many contacts because I work in a few countries, and have categorized my contacts according to country. It would be super if I could "lock" the filter to a category (in my case country), so when I'm in a particular country, I can just view contacts from that country without trawling through all contacts from all countries.
Is there a fix for this? In WM6 itself? In reg? With a .cab? With a third-party software?
Can anyone help? It would be much appreciated.
I would like to have a default filter too... By the way, I am using WM5 (P3600/trinity), and it also shows everything when you get into the contacts. What I do for the time being is put the contacts I want to see everytime in the quick numbers list of the phone.
I know this thread's a couple of weeks old but I've been searching XDA for a solution. The weird thing is that Windows Mobile had the ability to retain a filter (at least until you rebooted) in Windows Mobile 2003. I had this feature on my Audiovox SMT5600 (HTC Tornado, I think) over 3 years ago.
Old thread I know...
Now that its getting close to 2009... anyone find a solution to this problem/annoyance?
Thansk
i am sick of this, i have wm6.1 and there is still same story, filter is returning to all mode...grrr
in lates version is still same thing ?
can anybody help please.....
is there still no solution?
i've cracked everybit till now and havent yet found how to set up a filter to choose only contacts with email addresses - but no success yet.
i recently imported my gmail contacts on my phone and want to send out an invite to all my friends - unfortunately unless i type a contact name, i wouldnt know which other contact exists there.
its getting be a pain..
any luck
Hi All
Sorry to bring this back, but is there a fix for this yet, i too find it a pain, would be much better if you could choose a default filter and not All.
Tom
I'm looking also for a sollution, but Microsoft it's sleeping and dont do nothing about this filter problem... all this years and wm it's the same ****...
I have tried to search with no luck. My question is when i installed touchit 4.4 i do not have any of the pop up menu's IE when making a text and i start typing the persons name or a word it never pops up suggestions. With over 200 contacts i would like to have the short option to type in 3 letters or so and select the contact from the actual Sms screen. Another thing is when i goto create new (msg) i dont get the option to do MMS or SMS. Lastly off the top of my head when i am typing words i like the option with suggestions again. Can anybody either point me to the proper settings or registry keys to re-enable these features. Also i noticed when i put touch it on my phone all of my contacts are doubled now ? how can i fix this without manually deleting them all
Tmo With wings
touch it 4.4
duprades kb fix
diabolical28 said:
I have tried to search with no luck. My question is when i installed touchit 4.4 i do not have any of the pop up menu's IE when making a text and i start typing the persons name or a word it never pops up suggestions. With over 200 contacts i would like to have the short option to type in 3 letters or so and select the contact from the actual Sms screen. Another thing is when i goto create new (msg) i dont get the option to do MMS or SMS. Lastly off the top of my head when i am typing words i like the option with suggestions again. Can anybody either point me to the proper settings or registry keys to re-enable these features. Also i noticed when i put touch it on my phone all of my contacts are doubled now ? how can i fix this without manually deleting them all
Tmo With wings
touch it 4.4
duprades kb fix
Click to expand...
Click to collapse
1. I havent seached for a fix as far as typing input for SMS recipients, I have just gotten use to clicking menu and adding someone from my contacts instead of typing there name.
2. If you put messaging on your today screen, click on the no unread messages bar and it will take you to the messaging center to pick MMS,SMS, email account.
3. I did think the wings OEM text suggestion program was great, Ive gotten use to not using it with 4.4. Tho if you use the virtual keyboard the program is still enabled.
I dont know if any of this will be a fix for you, it is alil info. There might be things you have to get use to not having with Touch, but be glad you have more than 14mb of memory.
Also, for the duplicate contacts, I would just make sure all your numbers are embedded on your sim card, then select all from your contacts and delete them. Open SIM manager from programs, select all from menu and save all to contacts.
Yes true maybe someone can find the registry keys to enable it, Speaking of registry besides the lame attempt at wiki of a good solid registry hack,tweak mod guide does anybody have a better site while i was Out of town visiting over xmas i stumbled accross a site that offered so many registry hacks but i didnt book mark it
Also a few more questions i get really mad that the Wing does not allow lets say .mid .gif etc files in MMS's is there a way to disable automatic file deletion in mms? sorry if this doesnt make much sense just worked 14 hrs.
you can just write your contact's name (or part of their name) and then go to "menu" and click on "check names".
This should be easier than going through your contacts.
jkrn2003 said:
you can just write your contact's name (or part of their name) and then go to "menu" and click on "check names".
This should be easier than going through your contacts.
Click to expand...
Click to collapse
typing a name and then going thru menu is more steps than just clicking add recipent and clicking the contact you want.
I dont know any other registry sites.
Good Luck
I find it extremely annoying that any alterations to any contact cause the phone to save the contact in a "Last, First" format. I don't like that, and I prefer a more standard "First Last".
The only way I found I can do this is through an old WinMo app called contact fix... but I need to fire it up manually after every small edit I make to any contact (let alone actually adding a new one).
Is there a way to change the default saving mode? Perhaps a registry entry of sorts?
no you cant change the default behavour.
If you sync with outlook, you CAN change this same behavour in that, which helps some.
Look for 'contact changer first/last' which will switch all your current contacts (as you may have already done) and from now on, when you are creating a new contact, be sure and scroll to the bottom - more - then where the name shows, top left, tap it, and the third option down is 'file as'
Bit of a pain, really.
Personally i put the whole name in the first name (or last name, doesnt matter) field how i want it to show, no problem.
samsamuel said:
no you cant change the default behavour.
If you sync with outlook, you CAN change this same behavour in that, which helps some.
Look for 'contact changer first/last' which will switch all your current contacts (as you may have already done) and from now on, when you are creating a new contact, be sure and scroll to the bottom - more - then where the name shows, top left, tap it, and the third option down is 'file as'
Bit of a pain, really.
Personally i put the whole name in the first name (or last name, doesnt matter) field how i want it to show, no problem.
Click to expand...
Click to collapse
Well, that's definitely something that should get fixed at some point in WinMo...
Alternatively, perhaps it's a good idea for a background application to automatically set the "file as" parameter on any new or recently edited contacts...
Hi,
I also find it extremely annoying that each time you add or EVEN edit a contact it saves it as "Last, First". Can anybody help with this since there must be a setting for this (in the registry I would think).
Thx in advance.
gaeao said:
Hi,
I also find it extremely annoying that each time you add or EVEN edit a contact it saves it as "Last, First". Can anybody help with this since there must be a setting for this (in the registry I would think).
Thx in advance.
Click to expand...
Click to collapse
You could always use Microsoft Contacts rather than Sense Contacts.
Start -> Outlook -> Contacts.
Personally I edit any contacts in my computer's Outlook and sync them to my phone.