anyone have this case for the htc fuze? - Touch Pro, Fuze Accessories

http://cgi.ebay.com/FR-HTC-FUZE-TOU...5|66:2|65:12|39:1|240:1318|301:1|293:2|294:50
will this fit a att fuze?
looking for a rubberish case for my fuze. i have a bodyguardz screen on it..but its not as good since the edges are catching dirt

Sucks. Cheap, wouldn't reccomend. Try a hard rubberized case... you can find em on ebay easy.

Hyett1 said:
Sucks. Cheap, wouldn't reccomend. Try a hard rubberized case... you can find em on ebay easy.
Click to expand...
Click to collapse
links to said case?

AT&T sells a hard/rubberized case for around $25, but I strongly recommend against using them. As much as I hate carrying around a phone without a case, I have all kinds of issues with screen sensitivity whenever a snap-on case was on my Fuze.
Pressing on the top corner of the case would activate the Start Menu, the edges of the screen would become less sensitive... to the point of actually needing my stylus.
In addition, the nubs on both halves of the case press against each other, and actually separate the phone a little bit.

NotATreoFan said:
AT&T sells a hard/rubberized case for around $25, but I strongly recommend against using them. As much as I hate carrying around a phone without a case, I have all kinds of issues with screen sensitivity whenever a snap-on case was on my Fuze.
Pressing on the top corner of the case would activate the Start Menu, the edges of the screen would become less sensitive... to the point of actually needing my stylus.
In addition, the nubs on both halves of the case press against each other, and actually separate the phone a little bit.
Click to expand...
Click to collapse
One more thing to add to NATF's message....
Hard snap on cases scratch the hell out of the sides of the phone. Tried a few diff ones and not ONE left the oem case intact. I think its because sometimes dust gets between the case and the hard case and scratches it up. I just use a screen protector and a leather carrying case these days.

pyraxiate said:
One more thing to add to NATF's message....
Hard snap on cases scratch the hell out of the sides of the phone. Tried a few diff ones and not ONE left the oem case intact. I think its because sometimes dust gets between the case and the hard case and scratches it up. I just use a screen protector and a leather carrying case these days.
Click to expand...
Click to collapse
Same here. Actually, since AT&T didn't release a leather pouch for the Fuze, I'm still using the one from my Tilt.

The Seido hard innocase it super thin, does not scratch the fuze at all, and is worth the money.

antok86 said:
http://cgi.ebay.com/FR-HTC-FUZE-TOU...5|66:2|65:12|39:1|240:1318|301:1|293:2|294:50
will this fit a att fuze?
looking for a rubberish case for my fuze. i have a bodyguardz screen on it..but its not as good since the edges are catching dirt
Click to expand...
Click to collapse
I have this exact case and have been using it since I got the Fuze. I have the other case as well, still sitting in plastic.
I had to make a mod to mine. The usb mini sync/power cable didn't fit right, so I had to trim a little there.
I like this case. Plenty of protection, for both the screen and the button/d-pad area on the bottom. Not the most attractive case, but works very nicely for a soft rubber case.
Just my .02

I used to use this exact same case but didn't like it. Like previous poster mentioned the charger port is kinda blocked off but a lil alteration helped fix that. The biggest problem i had was how it attracted dust and lint way too easily which really made it look bad.

Related

Another case thread...Slimmest Kaiser Case?

Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal

Pocket-friendly cases

Unlike most here, I want to be able to put my Kaiser in a case, and put in my pocket. No swiveling, no clipping, and no holstering. I know the Kaiser doesn't have the most pocket-friendly form-factor, but hell, I have to make do with what I've got.
The slimmer and lighter the case, the more pocket-friendly it is.
Any recommendations?
I'm considering:
PDAir's Vertical Leather Pouch http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6590
& Seido's super slim rubberized case http://www.htcforums.com/kaiser-tilt-tytn-p4550-f13/seido-slim-case-t11.html
& PDAir's Aluminum case http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Be very careful of the screen in your pocket. Two of your choices will not protect the screen. Good luck.
I've tried several different cases, and I too have opted to just keep the phone in my pocket. And I don't use any protective covers, but I do so with some rules.
1. NOTHING in the same pocket with it.
2. Always screen facing toward me.
3. ALWAYS be aware it is in my pocket. (IE, no bumping into anything, no leaning on anything, and no squating down and putting my phone in a bind)
I have to say after 10 months of use, it still looks almost new.
GWelker62 said:
I've tried several different cases, and I too have opted to just keep the phone in my pocket. And I don't use any protective covers, but I do so with some rules.
1. NOTHING in the same pocket with it.
2. Always screen facing toward me.
3. ALWAYS be aware it is in my pocket. (IE, no bumping into anything, no leaning on anything, and no squating down and putting my phone in a bind)
I have to say after 10 months of use, it still looks almost new.
Click to expand...
Click to collapse
your mind reading skills are awesome!
That is exactly the way i carry mine ... With the execption of when I am at work I slip it into a leather eyeglass case I found, to keep dust and grime off it.
otheruser said:
PDAir's Vertical Leather Pouch http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6590
Click to expand...
Click to collapse
I've used this case for a long time (had a similar one for my Wizard) and really like it:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6562
Only downside is the top and bottom do add thickness to the phone overall, but during the summer when I'm wearing cargo shorts, it goes into my pocket nicely. Biggest downside is the case fits tight so if you are on the phone the slightest bump will tend to hang up the call (or other buttons get pressed). So now I'm looking at a new case they offer:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=7423#thumb
This leaves the buttons exposed, gives you a cover over the screen, and then with a simple unsnap you can get to the keyboard (and it appears no plastic cover over the keys like the one I have now.
I really like the Seidio Slim, but I really need a flap to cover the screen for protection (whether its in my pocket or on my belt, I just don't like the screen being unprotected). I wish the Seidio holster had a removable clip as that could be workable then...
depending on the size of your pocket, the krusell orbit works quite well
I use the seido rubberized one with a screen protector
psionandy said:
depending on the size of your pocket, the krusell orbit works quite well
Click to expand...
Click to collapse
Here, Here!! Another vote for the Orbit, it takes a few to get used to, but after dropping it twice, and not a dent.. i like it!
if im up to something where it might get bashed by accident then i use my PDAir's Vertical Leather Pouch, as it covers the screen nicely
mfrazzz said:
So now I'm looking at a new case they offer:
http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=7423#thumb
This leaves the buttons exposed, gives you a cover over the screen, and then with a simple unsnap you can get to the keyboard (and it appears no plastic cover over the keys like the one I have now.
I really like the Seidio Slim, but I really need a flap to cover the screen for protection (whether its in my pocket or on my belt, I just don't like the screen being unprotected). I wish the Seidio holster had a removable clip as that could be workable then...
Click to expand...
Click to collapse
I bought one just like the new PDAir, but it was a cheap ebay case. Best $15 I've spent - has saved the phone from a number of drops, fits really well, and still fits in my pocket (it does add bulk, but an acceptable amount and I really wanted something to cover the screen).
Everything is easily accessible, and using the keyboard is a breeze.
The only drawback is if you're slipping between a car and your pocket. I've got a metal case for it in silver (It's actually the Hermes case) that i use but most the time I don't bother. It's not been too bad. But then, I am covered by Insurance

Seidio's Innocase Surface Case - Black

I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I owned the seidio clip holster for my Kaiser and loved it!! Very sturdy and comfortable. Will definitely be ordering one for my Rafael.
Have the hybrid case for the Kaiser. It still is a top-notch case (once Seidio gets their head out of their ass about their online support).
Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Very illuminating photos - thank-you!
Was "reasonably certain" that would not find using the Touch Screen with a FINGER all that attractive - after all, have hardly ever used my Axim without the Stylus.
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....
rkistler said:
But in actual practice find that it IS often convenient to simply swipe a finger at the screen, and so your comments about the relative Screen Border Thickness - and hence the possibility of interference with finger-contact near the edges of the screen - are very interesting.
Still, $30 seems a lot for small hunk of plastic....
Click to expand...
Click to collapse
As illustrated, the Seidio case is thin (on width) around the screen leaving plenty of space for finger-gestures. Hitting X and menus at bottom is no problem. The Amazon case felt like it was a 8525 again.
There's also velvet in the case back so it doesn't scratch the OEM smooth back. This raises the back a few mm above the original diamond plate, but with the speaker hole, it's all around good protection.
For $30, Seidio tends to be the first and last case you'll ever get because it's a perfect fit, and solid at protection and surviving drops. Only reason to switch to another case is they come out with some other fancy idea such as a hybrid rubber-crystal case + holster, or other colors. I would go for a white case.
I paid $8 (total) for the Amazon case and you can see what I got. Horribly fitting, messes with the slider, rubberization peeling before it came out of the bag. $30 isn't that bad especially since I'm still very happy with the hybrid-case I got for my Kaiser last year.
edit:
whatever case you guys end up getting, I have to say my FUZE is a much more pleasant beast now that the cold, slimy feeling is gone.
the amazon case you purchased is not a good example of the other options out there. I am not saying anything negative about the Seido case. I have seen it personally and it is a nice case, but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
The $30 cost is the main objection, but in general Seido makes quality cases.
Overall it is very positive that there are multiple options now available and more coming each day.
does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade
shadeone said:
does this one interfere with teh screen as reported on the other amazon/ebay one? something about the inside of the upper left corner pressing down on the screen makes one unable to use the screen after having the case on for a few days... the only way to resolve this with the other one is to file down the inside of the plastic part that touches the screen...
shade
Click to expand...
Click to collapse
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?
jknuckey said:
I'm interested in the answer to this question too. My initial attempt at sanding down my rubberized ebay case was not successful, my phone still locked up after a couple of days.
Fuze innocase owners, are you lockup free after days of operation?
Click to expand...
Click to collapse
on your ebay case, why are you still locking up? mine is not locking up anymore at all after sanding down a little on the inside upper left side?
TVDinner said:
but the one on Ebay that many are buying is also pretty nice, and no issues with the pealing your pictures showed. The employees in my company have 6 Fuze phones and no one has had any issues like that. The biggest illusion with the phone shown at http://forum.xda-developers.com/showthread.php?t=459761 is that the border is white and not black like the rest of the case.
Click to expand...
Click to collapse
Just because you're happy with the work you put into fixing your Ebay case does not mean you should troll other case threads to protect your investment and mind-share about it. Also stating that I'm not a Seidio apologist since I haven't had the greatest shipping experience last time around, and their CS/managers lying back-and-forth about it.
Lock-ups? Are you seriously kidding? That's a red-flag for me right there. Even the Amazon case doesn't have that problem.
The Innocase is a perfect fit with no modifications necessary. That's what paying a slight premium gets you. Costs less than getting the Expansys Touch Pro back too.
It's like paying for the unlocked version of the phone. No crapware, loads of accessories, and special attention to details the cut-rate version doesn't have.
I've noticed the Ebay case has a huge clip tab right next to the volume-up button. The Seidio case clips seem to be more thoughtfully placed, and smaller, thinner. In fact, the bottom case has a cut-out curve around the volume/PTT buttons also that helps the case stay out of the way.
Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.
OlSarge said:
I've never had one before, but heard good things about the Seidio case. It's available for order now.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
I just ordered the case and clip combo.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSR2HTFE-BK
Might get the Innodock Jr. charger later.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CRJHTCX1-BKC
Click to expand...
Click to collapse
I've had the case, belt clip and charger for a few days. Overall, I'm very happy with the products, and would purchase Seidio equipment again in the future. I've had a few different cases for my old 8525, and I like this one for my Fuze the best.
I love the case. It's not bulky, and has a good feel to it. I wasn't sure about the clips that hold the case to the phone, because they looked fragile...but it holds very nicely.
The belt clip for the case is fine. Seems to hold the phone and case in very well, and the belt clip will not slip off any belt I've tried it on.
The charger...I'm not happy with it. That's my fault not Seidio's, I didn't read the description of the charger. I'm sure it's a quality product. It is a small dock type charger, but comes with a cable with two large USB connections on it. So it can be docked when plugged into a computer's USB. I thought it would have a connection to plug into a wall outlet.
Just bought the combo pack, Will post pics when it arrives.
Just wondering if this case will fit the Bell / CDMA version, is it a rubber type compound, as well does the case scratch the phone in any way?
Thanks
Some questions?
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks
TVDinner said:
Thank you for you info, and no trolling (that made me laugh) intended. I have the ebay case AND have ordered the Seido case, which we were waiting for. Thanks again.
Click to expand...
Click to collapse
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...
jknuckey said:
Hey TVDinner, why did you order the Seidio case? Did your filed ebay case start locking up again?
To answer your question to me in my earlier response, I don't know why my ebay case locked up after my filing attempt. Maybe I didn't file it enough? My tolerance level for trial and error is pretty low, so maybe I'll just order the innocase...
Click to expand...
Click to collapse
Hi jknuckey - no my ebay case is working great to be honest. no issues at all after my initial filing on it. But I always need to have "the best" case, lol. I was originally waiting for the Seidio one, but they were taking to long and I ordered the ebay one. then shortly after the Seidio one became available, lol.
datruth said:
For ppl that have the combo case/holster. Can you put the phone with the case on it, in the holster with screen facing in (screen facing you) and out (screen facing away from you)?
Thanks
Click to expand...
Click to collapse
There are two models of the holster.
One that fits only just the phone:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEAS
"Seidio's stylish holster provides the ultimate in convenience and functionality by securing your Smartphone on all sides.
- Unique Spring-Clip holds your device securely and lifts for quick access
- Soft-touch "rubberized" texture provides a unique look and extra protection
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors"
One that only fits the phone with the case:
https://www.seidioonline.com/ProductDetails.asp?ProductCode=HLHTFEASC
"Seidio’s Innocase holster offers the best carrying solution when paired with our Innocase.
- Designed specifically for Seidio Innocases
- Unique Spring-Clip holds your device securely and lifts for quick access
- Face-in design protects your device's screen
- Locking swivel belt clip with 7 rotating angles
- Easy access to connectors
*This holster is designed for use exclusively with our Innocases and will not fit a "naked" device or other manufacturer's products. "
The holsters are custom fit, the phone only goes in facing you.
NuShrike said:
Just got the Innocase and it's much much better quality than the other Amazon one.
Another truly excellent case after the hybrid Seidio case on the Kaiser.
First 3 pictures are of Innocase
4th is with Amazon's case's top with thick borders around the screen
5th is comparison of these "Touch" screen border thickness.
Macro-mode for those that haven't figured it out in the Youtube videos. Yes, Amazon's case has its rubberization already peeling before I took it out of its shipping packet.
Click to expand...
Click to collapse
Hey bro any peeling so far from the Innocase? I just ordered it... I had the ebay one but man screen still freezing after I filed.. bleh...

Seidio Innocase Surface Case - Pictures??

Has anybody purchased the Seidio Innocase Surface case?? Could you post some pictures?? I'm debating if I want it or not, but one picture on their website really doesn't show how thick it really is on the phone. Also looking at opinions if you have it on your Touch Pro/FUZE. Thanx.
I should be ordering the case this week. I'll let you know.
RallyPunx said:
Has anybody purchased the Seidio Innocase Surface case?? Could you post some pictures?? I'm debating if I want it or not, but one picture on their website really doesn't show how thick it really is on the phone. Also looking at opinions if you have it on your Touch Pro/FUZE. Thanx.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=461936
That thread has links to the Seidio site, which has pictures of the case from different angles.
More specifically...if you go through this link and "mouse over" the picture of the case, it'll magnify the area:
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR2HTFE-BK
If you actually click on the picture, it will take you to this page, which has a few different angles.
http://www.seidioonline.com/PhotoGallery.asp?ProductCode=CSR2HTFE-BK
I saw those pictures on the website, but you can't really see the area around the screen very much to see how deep the screen is with the case on. I don't use the stylus much and I think if the case is too thick, I will have trouble hitting the corner buttons (start, calendar, contacts) with my finger. Any thoughts?
D3TH METAL said:
I should be ordering the case this week. I'll let you know.
Click to expand...
Click to collapse
Please also let us know how well this case works for you. There is a similar type of case for $10 on ebay which causes a phone lockup due to improper fit around the screen:
http://forum.xda-developers.com/showthread.php?t=459761
The problem rears its ugly face usually after a couple days of use...
I'd be willing to pay 3x for a case that actually works!
thanks!
jknuckey said:
Please also let us know how well this case works for you. There is a similar type of case for $10 on ebay which causes a phone lockup due to improper fit around the screen:
http://forum.xda-developers.com/showthread.php?t=459761
The problem rears its ugly face usually after a couple days of use...
I'd be willing to pay 3x for a case that actually works!
thanks!
Click to expand...
Click to collapse
I honestly don't see how any of these cases would work better than the ebay one. I had the BG one which actually is worse than the ebay unit. The ebay unit I have has been fine for more than a few days. It has to do with the flush screen of the FUZE so any excessive pressure against the screen would render the screen inoperable over time. BUT without the pressure/tension, there would be play once the upper piece is snapped on.
There isn't really much room to do this due to the flush screen IMHO.
I bought a similiar case from Brando. It is clear plastic instead of black. It works well and there was another thread about it here. It just blocks the PTT button on the Fuze. Ive used it for a month and it works fine, no screen problems. Only problem for me is one of the tabs came off, but it still stays on nice and sturdy. Its adds quite some thickness to this already thick phone.
I switched to the Innocase w/ holster about 1 week ago from the Body Glove 2-pc Snap Case. I like both:
The Body Glove is built like a Brick S--- House, has a very nice non-slip finish that actually matches a resident wallpaper. The phone is very safe in this case however, its a pocket carry, no belt clip.
The Innocase is half the thickness of the Body Glove. It fits like 2nd skin and has a silky feel and seems to be a bit slippery. The holster at 1st glace scared me. Thought the phone would pop out but I have found after a week of use, its just fine and very handy. The clip that holds the phone is spring loaded and can be locked to keep the phone from being removed if needed. The only problem I see is for those of you who wish to holster your phone and listen to music with a wired connection. The Headphone jack is slightly obscured by the Lock clip of the holster. Nothing a Dremel tool couldn't fix very quickly.
As stated, I like them both but use the Innocase as my daily protection. If I find myself exposed to rougher conditions, my choice is the Brick S--- House case from Body Glove. Both fit like second skin.

Need Suggestions for Vibrant physical protection

Getting my vibe tomorrow, and want to get some stuff to protect it. Since it is a giant piece of plastic, it must be vulnerable to damage moreso than other phones. I will be putting the phone in my pocket most often.
Suggestions: Are Hard or Gel or Silicon or TPU the best material for cases in terms of dropping and scratching? Should I get a screen protector (don't want to spend more than a few bucks on this).
Please leave a little description or note so it's easier to understand the reasoning for the product. Thanks!
I've looked at some suggestions so far, with 10$ for 2 screens and other various expensive stuff. I was wondering if the cheaper ebay stuff such as http://cgi.ebay.com/NEW-Clear-LCD-S...811631?pt=PDA_Accessories&hash=item43a4730aaf would still be good for the vibrant? Definitely cost cutting.
Also, some TPU cases are just 1-2 dollars on ebay. Otterboxes on the other hand are +25$ sadly.
Ghost armor!
bionix v / tapatalk
real look ss is really good. 5stars on amazon. 10bucks
they give u a nice pkg with cleaning cloth, alcohol thing to clean ur screen, piece of tape to remove any remainning dusts before u apply the screen protector.
they give u 2screen protector btw
Sent from my SGH-T959 using XDA App
Case mate tough case. Kinda pricey but really cool. It doesn't grip your pocket when you try to take it out. But it feels good in your hand.
Powered by Axura with a dash of Voodoo
Otterbox
Sent from my SGH-T959 using XDA App
+1 on the realook screen protectors.
Powered by Axura with a dash of Voodoo
No screen protector and use the black one from tmobile
Zagg invisible shield and otterbox commuter case. TPU cases from ebay is pretty good and cheeap also.
+1 on the realook sp and body glove flex chrome case. it might feel a little weighty but the lip on the faux chrome bit is well worth the size increase.
thanks! lots of suggestions here. it will help if you leave a little note about your suggestion since everyone has a different opinion (such as why you might want to avoid getting screen protectors)
Seidio Innocase or Otterbox commuter. Had the Otterbox on my Slide and it worked awesome. I got the Seidio for the Vibe because I also wanted the clip and so far all is good with it. I'm using the screen protector from T-Mobile cause I had it left from when my wife got hers, works fine for me.
Sent from my SGH-T959 using XDA App
bodyglove
I have the bodyglove and it has worked well. I have dropped it twice and it still snaps back on and my phone is not scratched
I just ordered this http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
and before that I had the $2 case off ebay the one with diamond back to it, and its a great case just wanted to try something different, check this out if you dont like the idea of barely there case http://cgi.ebay.com/Samsung-Vibrant...226743?pt=PDA_Accessories&hash=item5641ecd1f7 heard its a good one too.
Oh and dont listen to anyone who tells you not to get a screen protector, your screen will get scratched if you dont... my friend is a perfect example and he swears he never had his keys and phone in the same pocket.
anyone have the Tirdent Cyclops and like it?
well got my phone, and the guy already threw on a generic screen protector and gave me a clear argyle? silicon case on top. i guess i'll use these for now until i see the use for better.
i have never touched it naked then forever virgin
presence06 said:
anyone have the Tirdent Cyclops and like it?
Click to expand...
Click to collapse
I have it and really like it. I was going to suggest it, but it might be too bulky for pocket carry. The outside would probably be covered in dust and lint also. I don't own the Otterbox Commuter, but I think the Trident Cyclops provides more protection. It has dust covers for the speakers and silicone plugs for the usb and headphone jack. Only thing unprotected would be the microphone hole.
in what sense would the speakers and plugs be unprotected--just dust? cant you use that keyboard compressed air blower for those?
i was wondering because my silicone case makes it impossible to get the usb charging port open so i was considering it just leaving it open forever, but not if its vulnerable to dmg
I have the T-Mobile rubber one, I like it but I hate the lint/hair it collects. I also hate how it scratched the hell out of the bezel. But I think that woud happen with any other case.
I've been checking out the Trident one and thought it looked pretty good.
My girlfriend got a Seido case for her Droinc and it reminds me of the inCase cases for iPhones, I wish they'd make them for the Vibrant...
presence06 said:
I have the T-Mobile rubber one, I like it but I hate the lint/hair it collects. I also hate how it scratched the hell out of the bezel. But I think that woud happen with any other case.
I've been checking out the Trident one and thought it looked pretty good.
My girlfriend got a Seido case for her Droinc and it reminds me of the inCase cases for iPhones, I wish they'd make them for the Vibrant...
Click to expand...
Click to collapse
why not try a soft cover? eliminates scratches
Nothing can be better than the Otterbox. Pricey though.

Categories

Resources